REPAIR TO FLOORING PLASTERING TILING JOINERY SANITARY FITTINGS AND MISC WORKS DAD MD ACCN IDAS FLATS UNDER AGE BR I OF GE NORTH MEERUT CANTT

Amount

M& L for providing Cement concrete 1:4:8 Type D 2 (using 40 mm graded crushed stone aggregates) ,in foundations, filling and mass concrete complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-1, (using 12.5mm graded stone aggregate) sub base as in floor to receive tiles complete all as specified.

M&L for providing cement concrete 1:3:6 Type C-1 (using 20 mm graded crushed stone aggregates) in cills, copings, kneelers, bed plates, kerbs, hold fast, fillings in pressed steel door frame and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded stone aggrigate) as in cover slab chullah hoods, chajjas, water troughs, shelves or similar works set & jointed in CM 1:4 complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

All as per Srl item No 05 here-in-before but except bricks

Supply only liquid water proofing compound complete all as specified and directed.

S&F factory made glazed and skeleton shutters 35 mm thick 2nd class hardwood (SAL/ CHAMP / HOLLOCK) open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); for doors and fitted to chowkats complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood facepanels, commercial type on both sides, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exc. 1.5 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exc 1.5 sqm but not exc. 4 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down shutters of any description exc 1 but n exc 2 sqm each, including builders hard ware fittings complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing on srl page No 174 of SSR Part-II complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing shown on page 178 of SSR Part-II complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section, having shoot / dia of bolt not less than 12mm complete all as specified and directed.

S&F in repairs mild steel helical door spring of size 300 mm fixed on flat iron fixed with screws or nut and bolts after welding the flat iron to MS angle iron / pressed steel chowkhats including welding etc, if necessary complete all as specified and directed.

S&F 300 mm long Mild steel sliding door bolts, with haps staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 12mm dia of shoot / bolt of extruded section or cast aluminium alloy complete all as specified and directed.

S&F stainless steel butt hinges of 100 mm size, complete all as specified and directed.

S & F in repairs Continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap (when open) 30 mm. complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.

S&F in repairs stainless steel tubular curtain rod 20mm dia, with bracket complete all as specified and directed.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

S&F mild steel work as for Hand rails, half round or other stock section, nosing to steps in cluding embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.). including necessary riveting and / or welding and similar work conforming to Fe 290 gde E 165 complete all as specified and directed.

S&F mild steel work as for framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work of water tanks and similar work including necessary riveting and / or welding conforming to Fe 290 (Gde-E 165) complete all as specified and directed.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 (Gde E-165) complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

S&F factory made steel windows with side hung double shutters (glazed & gauged shutters) including box type hinges with guard bars with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded. and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work complete all as specified and directed.

Taking down old existing water proofing treatment from top of RCC/arch slab including taking down of concrete padding or plaster and raking out joints of arch slab and hacking the top of RCC slab, cleaning with water and dispose off rubbish upto 200 meter complete all as specified and directed

M&L for providing average 50mm average thickness thick PCC (1:2:4) type BO, (using 12.5mm graded crushed stone aggregates) as in roof padding finished fair and even without using extra cement complete all as specified and directed.

M&L for preparing the new concrete / plastered surfaces by cleaning thoroughly to make it smooth and free from any foreign matter such as fungus, moss, dust etc by wire brushing and dusting and applying a coat of bitumenous primer conforming to IS : 3384 - 1986 @ 0.30 litre / Sqm and then pressing & laying 3mm thick Atactic Polypropylene Polymer (APP) modified prefabricated with non woven polyester reinforcement five layer water proofing membrane weighing not less than 3.60 Kg/ Sqm comprising of centre core of 160 - 170gsm non - woven polyster matt sandwitched on both sides by APP polymer modified bitumen duly protectd on both sides by 20 micron HMHDPE film by torch on application with gas welding torch (Butane torch), and thereover applying a tack coat of 85/25 blown grade bitumen conforming to IS : 702 @ 1.20 Kg / Sqm and finish the top surfaces with aluminium paint (Super Silver Shield) @ 0.150 Ltr / Sqm complete all as specified. as per manufacturer's instructions and as directed.

M&L in repairs for 18/19 mm thick solid WPC board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to WPC frame work as in cupboard sheleves kitchen cuboard etc including taking down existing material complete all as specified and directed.

M&L for pre-polished 20-25 mm thick machine cut Kota stone slabs of size 540 mm x 540 to 560mmx 560mm in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the stone slabs, including necessary grinding rubbing rounding to exposed edges and polising in granite finish laid over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per Srl item No 35 here-in-before but as on vertical surfaces such as skirting / dados & other similar works laid over & including 10mm thick backing coat in CM 1:4

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed".

M & L light shade colour vetrified ceramic tiles 7 to 8 mm thick (square / rectangular), area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed".

All as per Srl item No 38 here-in-before but as in skirting / dados and & other similar works laid over and including 10mm thick backing coat in CM 1:4

M&L for Glazed ceramic coloured tiles of size 350mmx 250mmx7 mm / 450mm x 350mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including backing coat of 10mm thick in cement mortar (1:4) complete all as specified and and directed

Demolition stone slabs and tiles of any description or thickness in floors, aproans laid and pointed in any mortar etc complete all as specified and directed

M&L for providing 18-20mm thick prepolished green marble stone(Udaipur green) as on cooking plateform, step's tread and similar works laid & jointed in neat cement slurry (1:4) jointed with white cement (1:2) mixed with pigment to match the shade / colour / matrix of the slab including rubbing and polishing complete all as specified and directed.

M&L for 20 mm thick machine cut Granite stone slab PERFECT BLACK table rubbed polished and round edges as in skirting / dados, cooking plateform, steps and window cills and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigmen to match with shade of granite laid over & including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Make : Mehatab tiles, indore ; Tulip Infrastructure, Saharanpur (U.P)

--------------BLANK-------------

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing of old decorated surfaces of walls (plastered or un plastered) including cornices etc and applying one coat of primer using roller complete all as specified and directed

M&L for preparing of priming / putty surfaces of walls (plastered or un plastered) including cornices etc and applying two coats of oil bound distemper using roller complete all as specified and directed

M&L for applying 3mm thick JK / Birla wall care putty for making smooth surface complete all as specified and directed

Material & labour for applying two coats of 100% premium acrylic emulsion paint (weather proof paint) having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additves @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over new surface using roller for painting complete all as specified and directed

M&L for preparation of old (plastered or un plastered) surfaces of walls including cornices etc and applying one coat of oil bound distemper using roller complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

M&L for three coats of white wash on newly plastered or unplastered surfaces of ceiling including preparation of surface complete all as specified and directed.

M & L for applying 15mm thick rendering unsing ready mix plaster bags in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @3% by weight of cement of as per manufacturer instructions, complete all as specified an directed. Note:-Water proofing compound shall be measured and paid sepratly Note : Contractor is required to deposit ready mix bags for 100% CA quantity to the Engr-in-Charge within 15 days of acceptance of contract.

M&L for preparing of old decorated surfaces of walls ( plastered or un plastered ) including cornices etc and applying two coat of white lime washing complete all as specified and directed

M&L complete removal of existing treatment of wall by machanical complete all as specified and directed

M&L for preparing of old decorated surfaces of walls (plastered or un plastered) including cornices etc and applying one coat of cement base paint, over one coat of primer complete all as specified and directed

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size,quality or description) from metal frames including punching or drilling out old glazed pins / spring clip and rubbish off the premises complete all as specified and directed.

Taking up or down GI water tubing 15mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and directed

Taking up or down GI water tubing 20mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and directed

Supplied and fixed GI water tubing 15 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied and fixed GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Dismantling old water tank of capacity exc 250 ltr but n.exc 500 ltr & Supplied, hoisted and fixed in position rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm dia Ball valve high pressure of PTMT with apoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

Dismantling old water tank of capacity exc 500 ltr but n.exc 1000 ltr & Supplied, hoisted and fixed inposition rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 1000 Ltrs capacity with and including 20mm dia Ball valve high pressure of PTMT with apoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

S&F in repair C P bib taps, cast copper alloy fancy type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

Supply and fixed in repairs gun metal globe or gate valves, 15mm bore dia, with iron wheel head, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supply and fixed in repairs gun metal globe or gate valves, 20mm bore dia, with iron wheel head ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repair ball valves PTMT high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and of 20 mm bore and fixed complete all as specified and directed.

Supplied and fixed in repairs CP soap dish brass CP conforming to the sample kept in the office of Engr-in-Charge complete all as specified and directed.

Supply and fixed angular valves, 15mm dia, cast copper alloy, CP with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

Supply and fixed stop valves, 15mm dia, cast copper alloy, CP with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supplied and fixed in repairs PTMT grating doom 100 mm dia and waste hole (minimum weight 40 gms) complete all as specified and directed.

Supplied and in repairs fixed 110mm bore dia PVC(SWR) pipes single socketed in any length with rubber ring jointed fixed to wall complete all as specified and directed.

Supplied and fixed in repairs 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring jointed fixed to wall complete all as specified and directed.

Supplied and fixed 32 mm dia PVC pipe low density ( LDPE ) of pressure rating 10 Kgf / cm fixed to wall ceiling or laid in floor as waste pipe complete all as specified and directed.

Supplied and fixed PVC (SWR) bends 110 mm bore complete all as specified and directed

Supplied and fixed PVC (SWR) bends 75 mm bore complete all as specified and directed

Supplied and fixed PVC (SWR) 110 mm bore junction, single(single 'T') equal or unequal complete all as specified and directed

Supplied and fixed PVC (SWR) vent Cowl 110 mm bore complete all as specified and directed

Supplied and fixed PVC (SWR) floor trap 75 mm bore including jointing to waste pipe with cement solvent fixed in cement concrete complete all as specified and directed

Supplied and fixed PVC (SWR) gully trap 100 mm bore setting and jointing with solvent cement complete all as specified and directed

Supplied and fixed PVC (SWR) 'S' trap 110 mm bore all as specified and directed

Supplied and fixed in repairs vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer and providing cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.

Supply and fixing in repairs vitreous china squatting pan, Orissa' pattern, size 580 x 440mm white, with integral foot rests with and including cast iron 'P' or 'S' trap and setting the trap and pan in and including PCC 1:4:8, type D-2 minimum 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, making all connections complete all as specified and directed.

Supply and fixing in repair vitreous china squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of lime concrete bedding and making connection with & tcincluding PVC P Trap, etc complete all as specified and directed.

Supply and fixing in repairs PVC low level flushing cistern of 10 Ltr capacity syphonic action type with inlet ball valve, float and handle including PVC brackets for mounting of cistern complete all as specified and directed.

Supplied and fixed in repairs 125 mm size brass chormium plated shower rose including fixing to steel pipe or union complete all as specified and directed

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M&L for concrete bed in PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore of pipe complete all as specified and directed.

M&L for SGSW drain pipe 150 mm internal dia laid in trenches , jointed and tested all as specified & directed.

Demolition and breaking up drain pipes ( SGSW, AC or reinforced concrete ) set in cement mortar for 150 mm internal dia of pipe complete all as specified and directed.

M&L for removing manhole cover, desludging and cleaning of septic tank / soakage well manhole shaft, sludge chamber and filter beds of any description and any position capacity by vaccume pumping machine and getting out and removing sludge to out side of defence laid disposal in low laying area including dewatering as required and filling of septic tank with water complete including refixing of manhole cover all as specified and directed . (Note : The cost of water as required for desludging by vaccume machine shall be included in the rates).

M&L for removing manhole cover, desludging and cleaning of manhole upto 1.5 Mtr depth capacity by vaccume pumping machine and getting out and removing sludge to out side of defence laid disposal in low laying area including dewatering as required and filling of septic tank with water complete including refixing of manhole cover all as specified and directed . (Note : The cost of water as required for desludging by vaccume machine shall be included in the rates).

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness(below or above ground level) and including removal of debris & rubbish from the site complete all as specified and directed. Note : Stone slabs / tiles and hard core of any description shall not be measured & paid under this item.

Carrying out cleaning work day to day complaints such as cleaning floor trap, nahni trap, gully trap cleaning of waste pipe of WHB, cleaning of WC, manhole, sewage line etc complete providing two nos Safaiwala at any location all as specified and directed by Engr-in-Charge

Carrying out cleaning work day to day complaints such as GI Pipe flushing cistern fixing of bib tap stop cock, etc complete providing one No of skiled labour at any location all as specified and directed by Engr-in-Charge

Carrying out carpenter work day to day complaints such as sesecuring / adjusting of shutter, fitting of tower bolt, window glass panes etc complete by providing one skilled labour at any locaiton all as specified and directed by Engr-in-Charge (store required will be paid seperately) complete all as specified and directed

B.K.construction