8256 REPAIR AND MAINT OF INTERNAL WIRING, FITTINGS, REPAIRS TO CEILING FANS/EXHAUST FANS, GEYSERS, SUBMAIN WIRING, DBS, JUNCTION BOX AND BUILDING SECURITY LIGHTS ETC AT SHAHJAHANPUR UNDER GE(E) BAREILLY.

Amount

Taking down carefully aluminum, light, fan, socket or power point complete including unserviceable fittings such as switches ceiling roses, pendants, regulators, sockets etc at site and making good the disturbed surfaces of walls, floors filling up of holes, plastering white washing distempering etc matching to the existing etc.

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100 volts, drawn through & including concealed 20 mm rigid non metalic PVC conduit with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches, switch sockets, sockets, regulators etc with 3 mm thick hylum laminated sheet cover including cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and directed for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch

One 5A flush type switch socket point on independent board

One 5A flush type socket outlet point on same board board

One light point controlled by two way switch.

All as per item Ser No.2 here in before but with using copper conductor of 2.5 Sqmm for one 3/5 pin socket outlet 15 Amps on independent and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100volts, drawn through & exisiting rigid non metalic PVC conduit with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches with 3 mm thick hylum laminated sheet cover plate in any size fixed on wall for fixing the switches, switch sockets, sockets, regulators etc complete all as specified for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch

One 5A flush type switch socket point on independent board

One 5A flush type socket out let point on same board board

All as per item Ser No. 4 here in before but with using copper conductor of 2.5 Sqmm for one 3/5 pin socket outlet 15 Amps on independent and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5 Sqmm size, 1100 volts, drawn through and including non metalic rigid PVC casing and caping not less than 25mm with all accessories fixed on wall / ceiling / truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5 Sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of MS boxes / non metallic rigid PVC Terminal boxes with cover plate in any size fixed on wall for fixing the switches, switch sockets, sockets, regulators etc complete all as specified for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch

One 5A flush type switch socket point on independent board

One 5A flush type socket outlet point on same board board

All as per item Ser No.6 here in before but with using copper conductor of 2.5 Sqmm for one 3/5 pin socket outlet 15 Amps on independent and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

Supply and fixing in replacement switch piano flush type polycarbonate single pole one way 5 Amps complete all as specified and directed.

Supply and fixing in replacement socket out let sefty shutter 5 pin 5 Ampsflus type all as specified and directed.

Supply and fix in replacement bell push flush type 5 Amps complete all as specified and directed.

Supply and fixing in replacement switch piano flush type one way 15 Amps SP complete all as specified.

Supply and fixing in replacement socket outlet polycarbonate 2 in 1 , 3 pin 5 / 15 Amps flush type complete all as specified and directed.

S& F in replacement swicth flush type 5 Amps single pole two way all as specified and directed.

S&F in replacement switch modular flush button single pole one way 15 Amp complete.

S&F socket in replacement out let 3 pin 5/15 Amp multipurpose, modular flush type 240 volt complete.

M & L for replacement of Step fan regulator modular type for ceiling fan of any sweep complete all as specified and directed.

Supply and fix in replacement White cover plates with frame 3 Module

Supply and fix in replacement White cover plates with frame 4 Module

Supply and fix in replacement White cover plates with frame 8 Module

S&F in replacement for lamp holder insulated body of PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F in replacement ceiling rose 3 terminals PVC / Polycarbonate insulated body 65mmx 50mm size complete all as spcified and directed.

Supply and fixing in replacement bell ding-dong musical AC 230 Volts single pole complete all as specified and directed.

S & F in replacement high range up to 40 mtr , cordless call bell with wireless remote including batteries complete all as specified and as directed.

S&F in replacement Stepped type electronics fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.

Supply and replace the Industrial laminated hylam sheet of 3 mm thick ISI marked

(a) 250 mmx 200 mm

(b) 350 mm x 250 mm

(c) 175 mm x 100 mm

(d) 100 mmx 100 mm

Supply and replace iron rectangular block for mounting, switches, sockets, fan regulator etc. with 1.6 mm thick

(a) 100 mm x 100 mm and 50 mm deep

(b) 175 mm x 100 mm and 50 mm deep

(c) 250 mm x 200 mm and 50 mm deep

(d) 350 mm x 250 mm and 50 mm deep

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light completewith driver, holders & LED lamp suitable for roof ceiling including connecting up with driver threecore flexible copper conductor cases of suitable sizecomplete

Supply and fixing round shape 12 watt watt 220 volts ACrecessed type with high efficiency PMMA diffusersoft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling includingconnecting up with three core flexible copperconductor cable of suitable size complete.

Supply and fixing Square shape 300mm x 300mm 15 watt watt 220 volts AC recessed type with high efficiency PMMA diffusersoft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copperconductor cable of suitable size complete.

Supply and fixing 12 watt luna LED ceiling light square colour cool white 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copperconductor cable of suitable size complete.

Supply and fixing 175mm x 175mm ceiling light panel square white 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling includingconnecting up with three core flexible copperconductor cable of suitable size complete.

S & F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holderconnecting up with three core flexible copperconductor cable of suitable size.

Supply and fix Modular White cover plates with frame 8 Module

Supply and fix Modular White cover plates with frame 6 Module

Supply and fix Modular White cover plates with frame 4 Module

Supply and fix Modular White cover plates with frame 3 Module

Supply and fix Modular White cover plates with frame 2 Module

Supply and fix recess mounting LED driver luminar suitable for 36 to 100 watts complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC 4 feet decorative box type with driver, holder includingLED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceilingrose complete all as specified.

Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V ACdecorative type with driver holder and LED lampincluding connecting up with three core flexiblecopper conductor cable of suitable size complete.

Supply and fix in replacement wall mounted light fitting LED 10 watts with accessories including 01x10/9 watt LED bulb complete all as specified and as directed.

Suppply and fixing submain wiring with using two single core 6.0 SQmm copper multy stranded conductor PVC insulated and unsheathed (FRLS) cable and one single core 6.0 Sqmm copper multistandred conductor PVC insulated and unsheathed (FRLS) Earth wire using ISI MArked IS 694 1100 volts grade PVC insulated flexible stranded copper conductor wire drawn through with and including medium grade concealed PV C conduit ISI marked not less than 25 mm dia including conduit fitting and accessories complete including cutting cheses in existing wall of any descirption buiolt in cement mortor and making good the disturbed surfaces in cement mortor (1:4) and finishing the surfaces to match with existing surfaces and finish termonatioin with bottle type copper lugs conduit being laid either in ceiling slab or wall or on surfaces or under the frame of the false ceiling including PVC flexible conduit or through wooden partition including clamping arrangement as required complete all as sepcified and directed . (Note:- Two Run of 6.0 Sqmm cable and one run of 6.0 sqmm earth wire in and including conduit of suuitable size shall be measured as one unit).

All as per item Ser No.26 here in before but with using copper conductor of 2.5 Sqmm and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

All as per item Ser No.26 here in before but with using copper conductor of 4 Sqmm and using 4 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

S&F PVC rectangular gang box multi purpose 5/15 Amps including making connections complete all as specified.

Supply and replace Rigid PVC casing & capping 20/25 mm wide

S&F PVC rectangular gang box multi purpose 5 Amps including making connections complete all as specified.

S&F socket out let 3 pin 5 amp multipurpose modular flash type.

S&F switch 6 Amp modular flush type 240 volt one way complete.

Material & labour for meter box made (sheet metal enclosure) out of MS sheet 2mm thick duly powder coated internall / externally with locking arragements, glass cover for taking meter reading, having sufficient working space and to accmodate these accessories:- (a). MCB Double pole 240 volt 63 Amps - 04 No (b). Taking up/removal of existing energy meter and fixing the same meter box - 04No

Taking down old unsv buildig security light fitting, Supply and fixing new energy saving LED light fitting 35 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK07 as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed.

M & L for GI Bracket made out of 25 mm GI Pipe light grade 1.20 m length bend to shape including clamps, nuts bolt and washer and fixing to wall/ floor complete as directed by Engr - in - Charge.

S&F for MCB SP 6-32 Amps breaking capacity 10 KA 'C' series 240 volts 50 Hz complete all as specified and directed.

S&F for MCB SP&N 10 to 63 Amps breaking capacity 10 KA 'C' series 240 volts 50 Hz complete all as specified and directed.

S&F for MCB TPN 100 Amps breaking capacity 10 KA 'B' series 415 volts 50 Hz complete all as specified and directed.

S&F MCB distribution board double door sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 of 4 Ways complete all as specified and directed.

S&F double door MCB distribution board sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 of 8 Ways complete all as specified and directed.

S&F double door MCB distribution board sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 of 12 Ways complete all as specified and directed.

S&F vertical three phase distribution board including MCCB 4 pole 100 Amps as incomer with three phase and single phase TP/SP as outgoing complete with insulated bus bar arrangement IP 43 protection with metal double door 4 way complete all as specified and as directed.

Taking down the Geyser of capacity 25 / 50 Ltr including disconnecting of electric / water supply connections from building for repair / replacement of defective components and overhauling / checking, servicing, overhauling of inner tank, geyser element, checking of geyser assembly and setting of thermostat range complete and refixing the same after repair and testing including making electectric and water supply connection complete all as specified and directed. Note:- a) All safety precautions for the safety precautions for persons working during removal/fixing back of the Geyser shall be ensured by the contractor . Rates are inclusive of brazing of inner tank of copper for prevention of leakage and replacement of clamps nut bolts gasket set complete. b) Replacement of defective components, painting,etc., which shall be measured and paid for separately.

Supply and Fixing Heating element of capacity 2 kW (cap type / triangular / threaded type), ISI marked, suitable for geyser of capacity 25/50 Ltr complete all as specified and directed.

Supply and Fixing Heating element of capacity 1.50 KW (cup type), ISI marked, suitable for geyser of capacity 25/50 Ltr complete all as specified and directed.

Supply and Fixing in Replacement of neon Indicator lamp of red and green colour lamps suitable for geyser of capacity 25/ 50 Ltr of any type / make complete all as specified and directed.

Supply and Fixing in Replacement of Thermostat assembly 16 A,240 AC, ISI marked, suitable for geyser of capacity 25/ 50Ltr of any type / make complete all as specified and directed.

Supply and Fixing in Replacement of PVC Helical (Hot / Cold) water connection pipe of size 450 mm x 15mm dia with two no of brass nut on each side for geyser complete all as specified and directed.

Supply and Fixing in Replacment of bottom plate of geyser in two pices including painting of approved colour suitable for 25/50 ltr capacity geyser as per original pattern and as approved by Engineer in charge complet all as specified and directed.

Supply and Fixing in Replacment of (4 nos) ,16 mm dia nuts bolts of suitable length duly grouted in walls in cement mortar for fixing of geyser of any capacity complet all as specified and directed.

Taking out damage glass wool from the geyser and supply fix glass wool all around the inner tank of geyser for maintaining the required temperature complet all as specified and directed.

M&L for Earthing complete with using GI earth plate electrode 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using 4 mm dia GI Wire as earth lead moulded and retreived to earth plate at one end and connected to main switch / control board at another end with and including 15 mm dia GI light grade from upper end of earth plate upto external face of the wall of the building including 20 mm dia bore GI pipe light grade as water pipe from chamber to upper edge of the plate GI funnel with wire mess fixed on water pipe and provison of PCC 1:2:4 type B-1 (Using 20 mm Dia graded stone aggregate) duly reinforced with mild steel round bar 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handle with and including necessarry excavation and earth work including laying the pipe concealed in floor / wall allas per plate NO-3 of SSR Part-I complete all as specified and directed and testing on completiopn (Note:- If the desired resistance is not found earthing shall be done by the contractor at no extra cost to Govt).

Taking down ceiling fans 48”/56” sweep, cleaning of dust properly cleaning, greasing& overhualing of bearings including refixing and connecting up all as directed .

Supply and fix in repairs 2.50 Mfd capacitior complete all as specified and as directed.

Supply and fix in repairs 3.15 Mfd capacitior complete all as specified and as directed.

Supply and fix in repairs 4.00 Mfd capacitior complete all as specified and as directed.

Supply and fix in repairs ball bearing suitable for exsiting ceiling fans on site complete all as specified and as directed.

Supply and fix in repair ‘U’ clamps complete with nut, bolts & split pins Heavy duty suitable for existing ceiling fan complete all as specified and as directed.

Supply and fix in repair M.S. rod for ceiling fans 3 ft long with ‘U’ clamp at one end other end with out nut bolts washers or screwed thread with check nuts & pin complete all as specified and as directed.

Material and labour for rewinding of burnt fan motor with super enameled copper wire of suitable size 1200/1400mm sweep ceiling fan of any make, type, model including transporation (inclusive of material & labour) complete all as specified and as directed

M&L for Painting of ceiling fans1200 mm /1400mm & Exhaust fans 250/300/450mm complete, in situwith synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

M&L for Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan all as specified

Taking down exhaust fans 250/300 mm Sweep and cleaning the dust properly, oiling, greasing & overhualing and replacement of defective, born out parts of bolts and bearings including refixing and connecting up all as directed Note : Replacement of defective/worn out parts will be measured & paid for separately

Taking down exhaust fans 400/450 mm Sweep and cleaning the dust properly, oiling, greasing & overhualing and replacement of defective, worn out parts of bolts and bearings including refixing and connecting up all as directed Note : Replacement of defective/worn out parts will be measured & paid for separately

Supply and fix Ball bearings suitable for existing exhaust fans as per site.

Supply and fix copper alloy Bush suitable for existing exhaust fans as per site.

Material and Labour for rewinding of exhaust fans 250/300 mm Sweep with super enameled copper wire of suitable size of any make/type/model including transporation complete all as specified and directed.

Material and Labour for rewinding of exhaust fans 400/450 mm Sweep with super enameled copper wire of suitable size of any make/type/model including transporation complete all as specified and directed.

Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm all as specified and directed.

Supply and replace wire of Flexible cord with copper conductor multistanded of twin core 23/0.198

Supply and Fixing of Flameproof cum Waterproof LED Bulk Head light fitting of 15W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and replace PVC seathed copper wire of 1.5 sq mm complete all as specified and directed.

M/S WASEEM KHAN CONTRACTOR

Shri Siddhi Vinayak Constructions

UTTRAKHAND BUILDERS

M/S SHAHABUDDIN AND SONS

avon electric engineering woks

M/S CHAUHAN ELECTRIC WORKS

M/S MANSI TRADERS