Janpad Etawah me Etawah Kumhawar marg (ODR) ke KM-6 me sthit Laghu setu ke marammat ka karya

Earthwork in cutting or in embankment in ordinary soil, excavation to be in the from of regular pits not exceeding ½ metre (20") in depth & earthwork in embankment to be in 20 cm (8") layers, including ramming & dressing the surface to required levels and slopes and also including 1.5 metre (5ft) lifts and 30 m (100") lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with 30 metres (100 ft) distance as directed by the Engineer-in-charge. excluding royalty which shall be paid as applicable. As Per SOR Chap . 4 Item No. 253 (Including All Taxes but Excluding G.S.T.)

Providing, fitting and fixing mild steel railing complete as per drawing and Technical Specification (Including All Taxes but Excluding G.S.T.)

Lifting of Superstructure span by deploying appropriate hydraulic, power jacks system for span length up to 30m with centralized power jack to facilitate for restoration of existing bearing without damaging the girders clearing and restoration of the damaged bearing including its stacking after completion of restoration of bearing at support lowering of deck shall be carried out to its original position without causing any damaged to the deck and girders as per approved mattered statement and standard practice , the item including all labour material, equpment etc complete as per specification and instruction of E/I including technical specification all complete but excluding cost of bearing of repair of bearing. (Including All Taxes but Excluding G.S.T.)

Elastomeric bearing supplying fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specification complete as specification in Dwrawing includes all materials as per drg. and design approved by competent authority complete as per specification and instructions of Engineer in charge but Excluding cost of lifting of Deck slab (Size of bearing is 63.00x40.00x10.00 cm) (Including All Taxes but Excluding G.S.T.)

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification (Including All Taxes but Excluding G.S.T.)

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications (Including All Taxes but Excluding G.S.T.)

Cement concrete with 4 cm gauge approved stone ballast approved coarse sand cement in the proportion of 8:4:1 including supply of all material T&P etc. required for proper completion of work. S.I. No 281 (Including All Taxes but Excluding G.S.T.)

First class brick work in 1:6 cement and Coarse sand mortar in foundation plinth including supply of all materials, labour and T&P etc. required for proper completion of work. S.I. No. NS (Including All Taxes but Excluding G.S.T.)

12 mm cement plaster in 1:3 single coat on fair side of single or half brick wall for interrior plastering includign arises, interior rounded angles chamfers and of rounded angles not exceeding 80 mm in girth and finished even and smooth. S.I. No. NS (Including All Taxes but Excluding G.S.T.)

Cement concrete with 2 cm gauge approved stone ballast approved coarse sand cement in the proportion of 4:2:1 including supply of all material T&P etc. required for proper completion of work. S.I. No.279(a) (Including All Taxes but Excluding G.S.T.)

Road Delinator Providing and fixing of Standard Metal Delineator as per IRC 79-2019 of minimum retro reflective unit exposed area of 330 square cm in white color, full cube corner micro prismatic non-metalic retro reflective sheeting on each side conforming with IRC 67-2012 and meeting the coefficient of retro reflection values as per ASTM D minimum 40 microns thickness. The delineator shall be painted with powder coat of pasted on both sides. The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground width not less than 100 mm and shall extend not more than 300mm below the ground while being installed. The front and back faces of te delineator should be curved with a radius of not more than 200mm and with delta angle (or central angle of curve) lying between 20 degree and 30 degree to increase the visibility of the delineator for veghicles moving in continuous curves, The delineator shall have grooves across the length to mage the reflective sheets vandal-proof) The retor reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67-2012 & Proof of the same in form of government report shall be uploaded which quoting tender. If somehow tendor pre qualification condition do not ask for government report then the report shall be submitted to engineer-in-charge before finalization of bill. The delineator is meant for application on gaps in median traffic islands, dangerous bends, roundabouts, narrow bridges etc. of as desired by site engineer. As Pwer Sor Chap. No. 26 Item No. MoRTH 805(8.15) (Including All Taxes but Excluding G.S.T.)

Retro-reflectorised Traffic sign as per IRC-67-2012 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC : 67-2012 made of high intensity greade sheeting wide clause 801.3 friced over aluminium sheeting Type-IV 1.5mm thick supprorted on a mild steel angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian condition as per IRC 67-2012 & proof of the same in form of government report shall be uploaded while quoting tender. (Including All Taxes but Excluding G.S.T.)

Type-A "W" : Metal Beam Crash Barrier Providing and erection a "W" metal beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail, 70cm above road/ground level, fixed on ISMC series channel vertical post, 150x75x5 mm spaced 2 m centre to centre, 1.8 m high 1.1m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fitting to conform to IS : 1367 anbd IS : 1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x 75x 5mm, 330mm long complete as per clause 810. (Including All Taxes but Excluding G.S.T.)

Please Enable Macros to View BoQ information