Providing Advanced Physical Security Solutions including Perimeter Security, Access control, Surveillance System, various I.T Technologies with command and control Centre including 5 Years of operation and maintenance in High Security Jail, Rohtak.

Amount

HSR PART [23.22.4.12]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.12. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 12 way ( 8 incoming 3phase*12 outgoing) [Through Rate]

[23.23.1.1]MISCELLANEOUS 1.1. Supply and fixing Galvanised Iron flexible pipe complete with socket nipples and check nuts etc. at both ends (Up to length of one metre):- Size 15 mm dia [Through Rate]

[23.23.10]MISCELLANEOUS 10. Supplying and drawing of 1 no UTP 4 pair CAT 6a LAN Cable in the existing surface/recess MS/PVC conduit as required [Through Rate]

[23.7.6.2]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia. [Through Rate]

[23.8.11.5]FITTING AND ACCESSORIES 11.5. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 15 amp 6 pin Socket [Through Rate]

[24.1.3]EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. [Through Rate]

[24.14.24]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 24. 16 Sq mm 4 core (Arm.) [Through Rate]

[24.14.40]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 40. 35 Sq mm 4 core (Arm.) [Through Rate]

[24.4.8.4]STREET LIGHT 8.4. Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 6 Metre Long pole with top dia 75 mm and bottom dia 150 mm with base plate of size 275 x 275 x 16 mm [Through Rate]

[24.5.2.1]MISCELLANEOUS ITEMS 2.1. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 40/32 mm outer dia/ inner dia [Through Rate]

[25.1.10]Supplying, fixing, testing and commissioning of condenser water pipes / non insulated chilled water pipes of following sizes of MS C class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 10. 40mm dia. [Through Rate]

[25.1.3]Supplying, fixing, testing and commissioning of condenser water pipes / non insulated chilled water pipes of following sizes of MS C class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 3. 200mm dia. [Through Rate]

[25.1.9]Supplying, fixing, testing and commissioning of condenser water pipes / non insulated chilled water pipes of following sizes of MS C class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 9. 50mm dia. [Through Rate]

[25.3.6]Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications. 6. 100mm dia. [Through Rate]

[25.3.7]Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications. 7. 80mm dia. [Through Rate]

[25.4.2]Supplying, fixing, testing and commissioning o NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end and PN 16 pressure rating as specified. 2. 150mm dia. [Through Rate]

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS Sheet, 1200mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

Supply and Erection of hose box double door (750x 600x 250mm) suitable for 2 nos. hose pipe 15 meter, 1 no. short branch pipe complete in all respect.

Supply, Installation, Testing and Commissioning of 1.5 TR, 5 star, Inverter type, Wall mount `Split Air-conditioning unit `, single phase consisting of condensing indoor unit, outdoor unit of copper coil, MS stand, copper wound digital stabilizer 4 KVA , 160V -270V , copper refrigerant piping and cabling between indoor and outdoor unit upto 3 meter etc., complete in all respect i/c making repair of wall, floor and roof in original shape caused by making holes and chases etc.

Supply, Installation, Testing and Commissioning of Door Frame Metal Detector with inbuilt camera and below mentioned specifications DFMD 1. General i. Type of usage Outdoor ii. Detection Zones Multiple Zone iii. Function Detects ferrous, Non-Ferrous and alloy metals concealed in the body of a person when passed through it’s arch Door Frame Construction i Water proof: Yes ii Weather proof: Yes 2. Detection i. Metals detectable Ferrous, Non-Ferrous, Ferrite and Alloys ii. Uniform detection from top to bottom Yes iii. Capable of Metal Detection in all orientations Yes iv. Detect multiple objects of various size, weight and shape in all the zones simultaneously form head to toe: Yes v. Capable of Metal Detection in Walking speed of interception: Yes vi. Performance independent of the speed of person passing through: Yes 3. Security i. Revision to secure access to the control unit by a pass word protected alpha numeric keypad: Yes ii. Re-setting after alarm condition Auto Re-set (auto) within 3 seconds iii. Walk/Stop indicator for traffic control Yes iv. User friendly self-testing diagnostics to identify faulty condition: Yes 4. Power Supply / Battery i. Source of Power AC mains supply / by rechargeable battery ii Power Supply 220V ± 10% VAC.

Supply, Installation, Testing and Commissioning of Hand Handled Metal Detector with below mentioned specifications HHMD 1. General i. Type of usage Outdoor ii. Detection Zones Multiple Zone iii. Function Detects ferrous, Non-Ferrous and alloy metals concealed in the body of a person when passed through 2. Detection i. Metals detectable Ferrous, Non-Ferrous, Ferrite and Alloys ii. Uniform detection from top to bottom Yes iii. Capable of Metal Detection in all orientations Yes iv. Detect multiple objects of various size, weight and shape in all the zones simultaneously form head to toe:Yes v. Capable of Metal Detection in Walking speed of interception:Yes vi. Performance independent of the speed of person passing through: Yes 3. Power Supply / Battery ii Power Supply 220V ± 10% VAC

Supply, Installation, Testing and Commissioning of Automatic Boom Barrier including other accessories Barrier width: 6m Opening/closing time: 3 to 6 seconds Power consumption:Max. 25 W Voltage : 90-230 VAC, 50/60 Hz Duty cycle:100% MCBF: 10 millions cycles Drive: DC Motor Drive (24 VDC) Enclosure rating: IP 54 Temperature range:0 to plus 55 °C

Supply, Installation, Testing and Commissioning of ACS Controllers including Power supply for Boom Barrier, Turnstile, Electric Lock, Readers 1. Primary Power: 12 to 24 Vdc ± 10 %, 500 mA maximum (reader and USB ports not included) 2. Reader Ports 600 mA maximum (add 600 mA to primary power current) 3. Micro USB Port 5 Vdc, 500 mA maximum (add 270 mA to primary power current) 4. Memory and Clock Backup Battery: 3 Volt Lithium, type BR2330 or CR2330 5. microSD Card: Format: microSD or microSDHC: 2GB to 8GB 6. Host Communication: Ethernet: 10-BaseT/100Base-TX and Micro USB port (2.0) with optional adapter: pluggable model USB2-OTGE100 7. Serial I/O Device One each: 2-wire RS-485, 2,400 to 115,200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and 1 stop bit 8. Inputs: Eight unsupervised/supervised, standard EOL: 1k/1k ohm, 1%, ¼ watt Two unsupervised dedicated for cabinet tamper and UPS fault monitoring 9. Outputs: Four relays, Form-C with dry contacts Normally open contact (NO) contact: 5 A @ 30 Vdc resistive Normally closed contact (NC) contact: 3 A @ 30 Vdc resistive.

Supply, Installation, Testing and Commissioning of full height Turnstile with controller, 4 Arms 90 degree (Height upto Ceiling) Stainless Steel of SS304 grade ensure for long lasting durability , Power conservation Electro-Magnetic Locks remain in STANDBY mode until TURNSTILE is activated ,OIL Lubrication system reduces need for Maintenance ,High quality electrical components with all labour including civil work and petty material reqd. to complete in all respect upto the entire satisfaction of Engineer-in-Charge having as per following technical specifications :- POWER Requirements- (AC110V/220V, 50/60HZ ) CAGING- Yes Return Back Lock - Yes Manual Rotation Lock - Yes WORKING Humidity- ( 0 % TO 90 % ) WORKING ENVIRONMENT- INDOOR/OUTDOOR LED indicator - Y BARRIER material- SUS304 STAINLESS STEEL BARRIER movement- ROTATING EMERGENCY mode - Y Note:- Above mentioned dimensions are tentative and may vary as per site requirements/Solution and also as per entire satisfaction of Engineer In Charge.

Supply, Installation, Testing and Commissioning of High Security Mi Fare Cards Readers 1 Operating Voltage: 9~24V DC 2 Frequency: 125KHz 3 Card Type: 125KHz – EM and Hid Card 4 Reading Distance: 2 ~ 7 CM 5 Output Format: Wiegand 26 bits 6 Index of Protection: IP66

Supply, Installation, Testing and Comissioning of High Security Mi Fare Cards @approx 1000 cards 1 Product13.56MHz RFID-cards MIFARE DESFire EV2 2K - 8K 2 Material PVC 3 Read Range up to 10cm 4 Frequency13.56 MHz 5 Chip type MIFARE®

Supply,Installation,Testing and Commissioning of RFID based biometric machine with Face/Contactless, PIN and High Security Mi Fare Card Readers with below Specifications. 1 Operating System Android/Linux 2 Display Type :Touch 3 Sunlight Readability :300 Nits or better 4 Processor 5 With inbuilt storage 6 Connectivity WIFI/Ethernet 7 Wi-Fi Connectivity : 802.11a/B/G/N 8 Biometric Authentication : Face/contactless, RFID Card, PIN 9 Prison Management System Software Integration Support

Supply, Installation, Testing and Commissioning of Access Control Software with licenses 1. Web Based Enterprise level Application for Access Control Management and Time Attendance Application with ulnlimted no. of users/card holders.GUI, Antipass back, Reports in Inbox, Unlimited Users, Door Scheduling, Unlimited logins, Time base access and alerts. 2. It shall be an Open Architecture design supporting industry standard databases, data base engines, printers, video cameras, and third party software’s . 3. Integration with prison management software 4. Integration with VMS Software 5. Relevant applications for relevant users based on their roles. 6. Single platform 7. Shift management with support of unlimited shift schedules. 8. Single screen view to facilitate various input entries.

Supply, Installation, Testing and Commissioning of Visitor Management System with licenses The VMSS shall be seamlessly integrated with Access Control System and CCTV Systems. The VMSS shall have the following minimum features: i) Visitor Enrolment ii) User-Definable Visitor Fields/Category iii) Pre-scheduled Visits iv) Visitor and Visit Tracking

Supply, Installation, Testing and Commissioning of 5MP IP PTZ Camera with minimum below mentioned features: Type of Camera: PTZ, Resolution and frame rate :5 MP @ 30fps, Optical Zoom: 30x Minimum and 16x Digital Zoom or better, Video Compression (Minimum) :H.264, H.265, or better, Storage: Including 128 GB SD card- class 10 expandable upto 256Gb. IR:150 mtr. Or higher, Network Protocol: TCP/IP,UDP, IPV4, IPV6, HTTPS, SNMP, DHCP, Enclosure:IP67, IK10, Power: PoE, POE plus ,24VDC System Capability: Should be ONVIF Profile G, S and T

Supply, Installation, Testing and Commissioning of 5 MP BULLET Camera 100 mtr IR with below mentioned minimum features: Type of Camera: Bullet Resolution and frame rate:5 MP @ 30fps Video Compression (Minimum):H.264, H.265, or better Storage: Including 256 GB SD card- class 10 Audio Recording :Including internal / External Mic IR:100 mtr. Or higher Network Protocol: TCP/IP, UDP, IPV4, IPV6, HTTPS, SNMP, DHCP Enclosure:IP67, IK10 Power :PoE System Capability: Should be ONVIF Profile G, S and T

Supply, Installation, Testing and Commissioning of 2 MP IP Dome Camera with below mentioned minimum features: Type of Camera: Dome Resolution and frame rate:2 MP @ 30fps Video Compression (Minimum):H.264, H.265, or better Storage: Including 128 GB SD card- class 10 expandable upto 256Gb. Audio Recording :Built in Mic IR:30 mtr. Or higher Network Protocol: TCP/IP, UDP, IPV4, IPV6, HTTPS, SNMP, DHCP Enclosure:IP67, IK10 Power: PoE System Capability: Should be ONVIF Profile G, S and T

Supply, Installation, Testing and Commissioning of 5 MP Dual Sensor Thermal PTZ Camera with below mentioned minimum features: Type of Camera: Dual Sensor Thermal PTZ Camera Resolution and frame rate:5 MP @ 30fps Video Compression (Minimum):H.264, H.265, or better Storage: Including 128 GB SD card- class 10 expandable upto 256Gb IR: 500 mtr. Or higher Network Protocol: TCP/ IP, UDP, IPV4, IPV6, HTTPS, SNMP, DHCP Power : PoE and external power supply System Capability: Should be ONVIF Profile G, S and T

Supply, Installation, Testing and Commissioning of Mobile Application for Police officials with licenses.

Supply, Installation, Testing and Commissioning of X Ray Baggage Scanner (400 mm x 600 mm) including roller tables at entry / Exit Features: 1. Baggage Counter 2. Multi-level user Management 3. System Work Time Counter 4. Self-diagnosis 5. User Report Management 6. Maintenance Warning 7. X - Ray Work Time Counter 8. Material Classification

Supply, Installation, Testing and Commissioning of K12 Crash Rated Road Blocker 4 mtr. Or above including all accessories and controllers. Accessories : Including PLC Based Control Panel, Push Button, 1. Blocking Height Minimum 1200mm or more 2. Technology Electro-hydraulic 3. K12 crash Rated 4. PLC based control Panel 5. Length 4mtr or above.

Cost for Integration with Prison Management System

Supply, Installation, Testing and Commissioning SAN Switch including all other accessories Rack mountable 1. 24 port with 32 Gbps or above 2. support NVMe/FC. 3. can connect physical or virtual servers through Fibre Channel Storage Area Networks (SAN) technology 4. High Performance, Availability, Scalability and Reliability 5. Health Monitoring 6. Suitable no of 5m LC-LC cables need to be considered accordingly 7. IEEE standards should be supported

Supply, Installation, Testing and Commissioning of SAN Storage including all HDDs and other accessories 1. Storage: - Minimum of 400 TB (Usable, after RAID Configuration) supporting all required protocols for the Video Footages. Bidder should calculate the recording (primary 30 days , incident based 60 days) 2. Should support various RAID Levels 3. All the necessary software (GUI Based) to configure and manage the storage space, RAID configuration, logical drives allocation, snapshots etc. are to be provided for the entire system proposed. 4. Should also include storage performance monitoring and management software 5. High availability and scalable.

Supply, Installation, Testing and Commissioning of PIDS Controller , Workstation, UPS 1kVA, switch , patch panel, FO cable including all accessories along with 4KM SM 6 core sensor (Fiber optic) cable. 1. 220V AC power supply 2. RJ-45 3. CUT RESILIENCE 4. Multiple Fence type support

Supply, Installation, Testing and Commissioning of PIDS Software with licenses with below specifications a. The system shall be capable of detecting attempts to breach the perimeter in various intrusion scenarios which shall not be limited to following scenarios : 1. Climbing the fence in real time 2. Cutting the fence fabric to intrude 3. Breaking the boundary wall and entering inside the campus 4. Digging below the wall/underground and entering the campus. b. The system shall be impervious to external jamming or interference from Electro Magnetic radiations, Radio Frequency radiations etc. c. The system field devices / components shall comply with IP 67/ IP68

Supply, Installation, Testing and Commissioning of Vandal proof (Stainless steel) Industrial Grade- POS (Canteen) Kiosk equipped with touchscreen, metal keyboard and trackball, Barcode reader, receipt printer, High Frequency 13.25 Mifare RFID reader and Fingerprint reader, power backup equipped with server/ client software licenses also integration with Jail ERP Software complete in all respect with all labour and petty material required.

Supply, Installation, Testing and Commissioning of Weatherproof Industrial Grade POE IP Speaker (10-25 watt) equipped with PA software other hardware which provide feature of zoning(announcement on single speaker, group of speakers or all speakers) and schedule announcement broadcasting etc. with all labour and petty material reqd. to complete in all respect upto the entire satisfaction of Engineer-in-Charge.

Supply, Installation, Testing and Commissioning of hard metal TCP/IP SOS BUTTON equipped with required server/ client software and also integration with Jail software complete in all respect with all labour and petty material reqd. as per following technical specifications 1) Communication Mode Full Duplex 2-Way Hands-Free Audio and Video Communication 2) Appliance Public, Vandal proof 3) Application Industrial Application 4) Master Station Caller Indicator Light With Audio and Video Communication System and Buzzer/Alarm 5) Connectivity Wired (RJ45) /Wireless 6) Battery Backup: Yes 7) Metal Push Button: Waterproof, Dustproof, Stainless Steel Or more 8) Body Framework: Stainless Steel SS304 9) Prison Management System Software Integration Support To Record And Manage The Alarm/Call Information

Supply, Installation, Testing and Commissioning of POE based IP Phone 2 Line Keys with Dual-Color LED and 1 SIP account, 3 XML Programmable context-sensitive Soft Keys, 5 (Menu, Navigation ) Keys. 13 Dedicated Function Keys for Page/ Intercom, Phonebook, Message, Home, Hold, Record, Mute, Headset, Transfer, Conference, Send and Redial, Speaker Phone, Volume with all software licenses, labour and petty material required to complete in all respect upto the entire satisfaction of Engineer-in-Charge

Supply, Installation, Testing and Commissioning of IP PBX / SIP Server minimum 125 Channel including software with all labour and petty material reqd. to complete in all respect upto the entire satisfaction of Engineer-in-Charge 1) Channel: minimum 125 Nos. 2) Concurrent Calls: 100 Concurrent Calls 3) FXS Ports : 1 or more 4) FXO Ports : 1 or more 5) Protocol SIP (RFC3261), IAX2 6) Transport Protocol UDP, TCP, TLS, SRTP 7) Codec:G711 (alaw/ulaw), G722, OPUS, AMR-NB/WB, SILK, G723.1, G726, G729, GSM, ADPCM, iLBC, H263, H263P, H264, VP8 8) DTMF In-band, RFC2833, SIP INFO 9) LAN :1* 10/100M 10) WAN :1* 10/100M 11) IP Services : Static IP, DHCP, VPN, Firewall, PPPoE, Bridge 13) Firewall :Yes 14) T.38 Fax :Yes 15) External Storage : SD Card , up to 128gb or better 16) USB :1 17) MIC Interface : 1 18) SPK Interface : 1

Supply, Installation, Testing and Commissioning of VHF Handheld Radio Set with all necessary accessories support with all labour and petty material reqd. to complete in all respect upto the entire satisfaction of Engineer-in-Charge General • Frequency Range 136 to 174 MHz (Full Band) • No. of channels 255 or More • Channel Spacing 12.5 KHz or better Analog: 11KOF3E or Equivalent technique • Type of Operation Simplex, Press to talk • Type of Antenna Rugged flexible Helical Antenna • Weight with Battery 500 gram (Max.) • Power Source Ni-MH or Lithium-ion or Li-polymer battery pack of 2000 mAH or more with belt clip 2. Transmitter • R.F Power output 1/5 Watt (Programmable) 3. Receiver 4.3. Wireless/ Walki Talki Gadget 4. Environmental Specifications • Operating Temperature -30ºC to plus 60 ºC • Storage Temperature -40ºC to plus 70 ºC • Humidity Max. 95% @ plus 40ºC non condensing 5. Accessories • Battery Charger Single unit, Smart charger (capable to charge Lithium Ion, Ni-MH, Lithium-Polymer batteries). • Hands free Kit (VOX unit with PTT) (optional) • Battery Two extra Lithium-ion or Ni-Mh or li-polymer batteries with each Radio Set • Leather case (Optional) One good quality leather case with belt clip and shoulder strip. 6. Configuration • Caller ID display Yes • Facility for locking the channel. or key pad locking 4.3. Wireless/ Walki Talki Gadget • SMS Texting Should be capable of sending pre-defined messages and short messages from keypad as Optional. • Programming Front panel programming with password protection or PC programming. • Battery strength bar Yes • Support GPS Inbuilt GPS system with accuracy of less than 10 meters. • GIS Radio should have Application protocol interface along with software applications to messaging on PC/ Console. • Networking Should be IP based for automatic roaming etc.

Supply, Installation, Testing and Commissioning of VHF Digital Repeater with all necessary accessories 1. General • Frequency Range 174 to 320 MHz (Full Band) • No. of channel 16 or more • Channel Spacing 12.5 KHz or better • Type of Emission (Modulation) Analog: 11K0F3E Digital:4FSK complying or equivalent technique complying to open standard / nonproprietary Digital • Weight Less than 15 Kg • Power Source • DC-13.8 Volt ± 15% • AC-230Volt ±15%, 50Hz ±1 • These should be switched automatically on DC supply during mains failure and when mains supply restored it should be shifted on mains from DC supply 4.3. Wireless/ Walki Talki Gadget 2. Transmitter • R.F Power output 45 Watt or more 3. Receiver 4. Environmental Specification • Operating Temperature -30ºC to plus 60 ºC • Storage: Temperature -40ºC to plus 71 ºC • Humidity 75 % RH 5. Networking Should be supplied with Repeater 6. Interfaces Ethernet port RJ-45 to provide - a) Wide area IP connectivity for Voice and Data. b) Remote monitoring and status check. 7. Accessories • Battery cable and Mounting fixtures Should be supplied with Repeater • Antenna 3dB/6dB gain, Omni Directional antenna with 45 meter RF Cable RG-217 for base station will be provided as per user’s requirements. • Programming Kit All necessary programming software and hardware required for the set will be provided as per user’s requirements. 4.3. Wireless/ Walki Talki Gadget

Supply, Installation, Testing and Commissioning of UHF Handheld Radio Set with all necessary accessories 1. Frequency Range 403-470 MHz No. of Channel 256 or more Channel Spacing 12.5 KHz or better Frequency Stability ± 1.0 PPM or better Protocol Digital TDM /FDM Technology Type of Operation Simplex press to talk Type of Antenna Helical Antenna Weight with battery 500 grams ( max) Power Source Ni-Mh or Li-on rechargeable battery with belt clips to meet the Operating time of 8 hours 2. RF Power out put Programmable/ switchable up to 4 watt or more 3. Wireless/ Walki Talki Gadget 4. Operating Temperature -30 ºC to plus 60ºC Storage Temperature -40ºC to plus 70ºC Humidity 90% RH at 50ºC Ingress Protection IP 54, IP 55 or better 5. Support GPS Should be supplied with GPS with accuracy less than 15m to enable being tracked from Remote Control Station Support GIS Radio should have application protocol interface along with software application to provide location and messaging on PC/ Console. Text Messaging Should be capable of sending short messages from keypad and defined messages Front Panel LCD Display Digital hand held radio with key pad 6. Battery charger . Programming Kit All necessary programming software and hardware required for the set.

Supply, Installation, Testing and Comissioning of UHF Long Range Readers for Boom Barriers 1 Power Supply 100-240V, DC plus 9V to 12 V(Power Adapter) 2 Interface RS232, RS485, Wiegand 26/34 (TCP/IP and Wi-Fi Optional ) 3 Indicators Buzzer 4 Housing ABS Plastic UHF RFID 5 Read Range 0 – 8m 6 Write Range 0 – 2m 7 Antenna Built-in 8dBi Linear/Circular Polarized Antenna (As per requirement) 8 Operating Mode Answer, Active, Trigger 9 Reading Rate Software Programmable 10 Operating Mode Answer, Active, Trigger 11 Power Output 0-30 dBm (adjustable) 12 Frequency Hopping FHSS

Supply, Installation, Testing and Commissioning of Prison Management System Software with licenses.

Supply, Installation, Testing and Commissioning of Database Server: 1. Type 2U Rack-mount 2. Processor Intel Xeon Processor, 56 core Processor or better 3. Frequency 2.3 GHz or better per processor RAM min 256 GB 4. Storage 2x 1.2 TB SSD or better in RAID 1 or better for OS and Application 5. RAID Raid 0/1/5/6/10 6. USB Port 2x USB 2.0 or better 7. RJ 45 2xRJ 45 Ports 8. Auto start/ resume Server should be capable of auto start/ resume operations post power fluctuation/ failure 9. Access Management Feature to limit access of data to users with access management software/ tool/ native storage feature 10. Power Source Redundant power Supply 11. Misc Display Screen Size - 21.5 inch or Higher with Keyboard, Mouse

Supply, Installation, Testing and Commissioning of Video Analytics Servers with min 3 GPU 1. Type 2U Rack-mount 2. Processor Intel Xeon Processor, Two 20 Core/40 thread Processor or better 3. Frequency 2.3 GHz or better per processor RAM min 128 GB 4. Storage : min. 2x 960 GB SSD or better in RAID 1 or better for OS and Application 5. RAID Raid 0/1/5/6/10 6. USB Port 2x USB 2.0 or better 7. RJ 45 2xRJ 45 Ports 8. Auto start/ resume Server should be capable of auto start/ resume operations post power fluctuation/ failure 9. Access Management Feature to limit access of data to users with access management software/ tool/ native storage feature 10. Power Source Redundant power Supply 11. Misc Display Screen Size - 21.5 inch or Higher with Keyboard, Mouse

Supply Installation Testing and Commissioning of Enterprise Management System including all IP devices licenses and perpetual software license Features: 1. Uni?ed Monitoring 2. User friendly GUI 3. Topology mapping of IT infrastructure 4. Network performance and availability monitoring 5. Open architecture - Future Ready Solution 6. Con?guration Management 7. Fault and Performance Management 8. Role based access user authentication 9. Automated Network Discovery 10. IPv4 and IPv6 support 11. Email/ SMS noti?cations 12. Reporting

Supply, Installation, Testing and Commissioning of 6U/9U Indoor Rack for Network Switch, PDU, patch panel, LIU and other accessories 1. 6/9 “U” rack , Wall Mounted 2. Frame Structure made of 1mm CRCA sheet 3. Front toughened glass door with 0.8mm MS frame with lock 4. Fixed side panels, welded structure 5. Cable entry provision at top and bottom (cable gland shall be used for termination of cables, unused openings shall be sealed properly), 6. Air circulation technology with 2 Cooling fan fitting option at top 7. Sufficient perforation provided for ventilation at all sides 8. Finished with 7 process pre-treated powder coating 9. Ventilation Fan 10. ACD- 6 Socket 5/15 Amp 11. Cable Manager 1U MS/PVC- Horizontal 12. Certificates: - ISO 9001, ISO14001, ISO45001/UL 2416/UL 60950-1, compliance with EIA 310 , IEC 297 13. Rack should be Make in India

Supply, Installation, Testing and Commissioning of Centralized software with perpetual software license and Device licenses to manage all displays from Command and Control Room. 1. Multi channel management 2. Backup play 3. Monitoring dashboard 4. Device health 5. Content sharing

Supply, Installation, Testing and Commissioning of PA Software including IP based Sip Paging Server for IP Speaker Including and all Accessories Over a GB of available space for user uploaded audio: for stored messages, and other audio created by the user ? Calendar-based bell scheduler supporting multiple schedule files and time-based recurring event management ? Supports call-in stored message recording ? Voice prompting and password controlled zones ? Line-in for background music ? Line-out connector ? NTP-based internal clock ? Rack mountable ? HTTPS web based configuration 1. PAS System Should have the capability to configure single or multiple zones or groups. The PAS should also support both, Live and Recorded inputs 2 User and Role based Authentication: Operator should be able to create ,edit, delete and assign roles and responsibilities to multiple users as per their privileges and hierarchy 3 Integration with VMS and Prison Management Software

Supply, Installation, Testing and Commissioning of Video Management Software with 714 channel licenses, base licenses, failover licenses and client licenses 1. The Offered VMS Software should be ONVIF S, G, T and M Profile Compliant. 2. The VMS system shall be a scalable client – server architecture built using well known operating systems 3. The VMS management server shall be able to intelligently scan an IP network for new devices (cameras or servers) along with automatic model detection. 4.Should support multiple brand IP cameras and encoders. 5.Export recording possible in client and remote PC also with proper authentication. 6.Edge Recording Synchronization: VMS Server and Camera should sync recordings in case of network or other communication failure between camera and VMS 7.Automatic discovery of devices 8.Add all cameras with single click. Apply settings to multiple cameras of same model with single click. 9.Generate logs and reports in Graphical and Tabular form and export in pdf, excel or more format 10.Should support multiple brand IP cameras, encoders, NVR`s and DVRs. No restriction on camera hardware. 11. support VMS Web Client

Supply, Installation, Testing and Commissioning of Video Analytics Software including base license,Analytics licenses and Client license for minimum but not limited to below given analytics such as 1. FRS: 50 2. Abandoned Object Detection:10 3. Fight Detection: 89 4. Loitering : 89 5. Intrusion Detection: 89 6. Motion Detection: 89 7. Smoke Detection: 89 8. Weapon Detection: 10 • The VA shall support video from any camera supported by the VMS. • The Video Analytics Platform shall be able to Perform on Both offline Pre-Recorded Video and Real time Live Video Streams. • The Video Analytics Application must have the Capability to View snapshots of each event and click on event to play recording of that time period on the VMS Client Interface/GUI. • Reporting: Report of all events possible though bar and line charts. • Proposed intelligent video analytics software shall have the capability to provide various alarms and triggers and should notify the Authorities if any incidence/violation happens.

Supply, Installation, Testing and Commissioning of IP 67 9/12U Outdoor Junction Box with PDU, Surge Protector and LiU 1. 9/12 “U” rack , Wall Mounted 2. Frame Structure made of 1mm CRCA sheet 3. Front toughened glass door with 0.8mm MS frame with lock 4. Fixed side panels, welded structure 5. Cable entry provision at top and bottom (cable gland shall be used for termination of cables, unused openings shall be sealed properly), 6. Air circulation technology with 2 Cooling fan fitting option at top 7. Sufficient perforation provided for ventilation at all sides 8. Finished with 7 process pre-treated powder coating 9. Ventilation Fan 10. ACD- 6 Socket 5/15 Amp 11. Cable Manager 1U MS/PVC- Horizontal 12. Certificates: - ISO 9001, ISO14001, ISO45001/UL 2416/UL 60950-1, compliance with EIA 310 , IEC 297 13. Rack should be Make in India

Supply, Installation, Testing and Commissioning of Body Worn Camera with minimum below mentioned features: Type of Camera: Body Worn Camera Resolution and frame rate :min 5 MP @ 30fps, Video Compression (Minimum) :H.264, H.265, or better, Storage: Built in 128 GB , expandable upto 256Gb. Audio Recording :Mic, Network Protocol: TCP/IP,UDP, IPV4, IPV6, HTTPS, SNMP, DHCP, 3G/4G, Wifi, GPS System Capability: Should be ONVIF Profile G, S and T

Supply, Installation, Testing and Commissioning of 8 port Docking Station with data transfer capabilities including all accessories

Supply, Installation, Testing and Commissioning of Workstation with i5 Processor with 21inch Monitor with OS and other accessories for Monitoring and other software`s: 1 Processor: i5 processor , 6-Core, 12M Cache, min 2.6GHz, 12th Generation or better 2 Chipset Intel Chipset or better 3 Memory 16 GB DDR4 RAM expandable upto 64GB with 2 DIMM slots 4 Hard disk Drive 1TB SATA (7200 Rpm) Hard Drive. 5 Optical Drive DVD plus /-RW drive 7 Ethernet Integrated 10/100/1000 Mbps ethernet controller: 8 Slots 2 PCIe x1 slots, 1 PCIe x16 slot 10 Wireless Wireless 802.11 b/g/n/ac with Bluetooth 11 Audio Port 1 Universal Audio Jack,, Internal Speaker 12 Monitor 21 inch or higher with FHD resolution, (same make as PC) 13 Keyboard USB Keyboard (same make as PC) 14 Mouse 2 Button USB Optical Mouse (same make as PC) 15 Operating System Windows 11 64 Bit preloaded.

Supply, Installation, Testing and Commissioning of 3KVA Online UPS with appropriate battery with battery rack for minimum 1 hours backup 1. Technology Microprocessor Controlled, Double Conversion, PWM IGBT Inverter with LCD Display for UPS status monitoring 2. Input Voltage Range 160-270 VAC on full load 3. Input Power Factor )0.99 4. Input Frequency 45-55Hz 5. Out Put Voltage Single Phase 230 plus /-1%, 50Hz 6. Output Power Factor 0.8 7. Frequency 50Hz plus /-0.5% 8. Efficiency )85% 9. Wave Form Pure Sine wave 10. Total Harmonic Distortion (THD) (3% for linear load, (6% nonlinear load 11. Overload Capacity Upto 110% for 120 sec, and 125% for 30 Sec and upto 150% load for 10 Sec 12. Back up Time Minimum 1 Hrs back up 13. Battery, Backup and with Battery Rack SMF Batteries with Minimum of 1 Hrs . With a Battery rack with a suitable inbuilt charge 14. Protections Low Battery, overload, over temperature, short circuit 15. Operating Temperature 0-40’C 16. Optional RS 232/USB, SNMP Compatibility 17. Noise: (60dB up to 1 meter 18. SNMP Port: Yes 19. Compatibility DG Set

Supply, Installation, Testing and Commissioning of 3D Under Vehicle Scanning System including Civil Work with complete underground installable UVSS unit, 1. 2nos. of Color AreaScan camera 2. Computer system with All related softwares pre-loaded 3. ALPR Camera : Optical Character Recognition (OCR) technology based, Automatic License Plate Reading System (ALPRS) with Software 4. Driver Image view Camera: Camera to view the Driver`s image, integrated with the system 5. Dual imaging feature from left and right view in order to identify any possible threat 6. High resolution COLOR left and right composite images of the vehicle’s underside

Supply, Installation, Testing and Commissioning of 5KVA Online UPS with appropriate battery for minimum 1 hours backup 1. Technology Microprocessor Controlled, Double Conversion, PWM IGBT Inverter with LCD Display for UPS status monitoring 2. Input Voltage Range 160-270 VAC on full load 3. Input Power Factor )0.99 4. Input Frequency 45-55Hz 5. Out Put Voltage Single Phase 230 plus /-1%, 50Hz 6. Output Power Factor 0.8 7. Frequency 50Hz plus /-0.5% 8. Efficiency )85% 9. Wave Form Pure Sine wave 10. Total Harmonic Distortion (THD) (3% for linear load, (6% nonlinear load 11. Overload Capacity Upto 110% for 120 sec, and 125% for 30 Sec and upto 150% load for 10 Sec 12. Back up Time Minimum 1 Hrs back up 13. Battery, Backup and with Battery Rack SMF Batteries with Minimum of 1 Hrs . With a Battery rack with a suitable inbuilt charger Charger Capacity (8hrs upto 90% Battery Certifications DGSandD or JIS C8702 compliant 14. Protections Low Battery, overload, over temperature, short circuit 17. Operating Temperature 0-40’C 18. Optional RS 232/USB, SNMP Compatibility 19. Noise: (60dB up to 1 meter 20. SNMP Port: Yes 21. Compatibility DG Set

Supply, Installation, Testing and Commissioning of online UPS (1 KVA) with 1 Hours battery backup , battery Rack 1. Technology Microprocessor Controlled, Double Conversion, PWM IGBT Inverter with LCD Display for UPS status monitoring 2. Isolation NA 3. Input Voltage Range 160-270 VAC on full load 4. Input Power Factor )0.99 5. Input Frequency 45-55Hz 6. Out Put Voltage Single Phase 230 plus /-1%, 50Hz 7. Output Power Factor 0.8 8. Frequency 50Hz plus /-0.5% 9. Efficiency )85% 10. Wave Form Pure Sine wave 11. Total Harmonic Distortion (THD) (3% for linear load, (6% nonlinear load 12. Overload Capacity overload capacity upto 125% for 60 sec 13. Back up Time 1 Hr back up 14. Battery, Backup and with Battery Rack SMF Batteries with Minimum of 1 hr. With a Battery rack with a suitable inbuilt charger 17. Protections Low Battery, overload, over temperature, short circuit 18. Operating Temperature 0-40’C 19. Optional RS 232/USB, SNMP Compatibility 20. Noise: (50dB up to 1 meter 21. SNMP Port: Yes 22. Product Quality Standard and certification ISO 9001:2008, 14001:2004, CE, ROHS45001, 50001, 14025 and BIS Certification 23. Compatibility DG Set Supply Installation Testing and Commissioning of 1KVA Online UPS with appropriate battery for minimum 1 hours backup

Supply, Installation, Testing and Commissioning of 15 KVA Online UPS with appropriate battery for minimum 1 hours backup and battery rack 1. Technology Microprocessor Controlled, Double Conversion, PWM IGBT Inverter with LCD Display for UPS status monitoring 2. Input Voltage Range 160-270 VAC on full load Isolation UPS must be provided with inbuild isolation transformer at output/input for total isolation between input and output 3 Input Power Factor )0.99 4. Input Frequency 45-55Hz 5. Out Put Voltage Single Phase 230 plus /-1%, 50Hz 6. Output Power Factor 0.8 7. Frequency 50Hz plus /-0.5% 8. Efficiency )85% 9. Wave Form Pure Sine wave 10. Total Harmonic Distortion (THD) (3% for linear load, (6% nonlinear load 11. Overload Capacity Upto 110% for 120 sec, and 125% for 30 Sec and upto 150% load for 10 Sec 12. Back up Time Minimum 1 Hrs back up 13. Battery, Backup and with Battery Rack SMF Batteries with Minimum of 1 Hrs . With a Battery rack with a suitable inbuilt charge 14. Protections Low Battery, overload, over temperature, short circuit 15. Operating Temperature 0-40’C 16. Optional RS 232/USB, SNMP Compatibility 17. Noise: (60dB up to 1 meter 18. SNMP Port: Yes 19. Compatibility DG Set.

Supply, Installation, Testing and Commissioning of online UPS (25 KVA) with 1 Hours battery backup and battery rack 1. Technology Microprocessor Controlled, Double Conversion, PWM IGBT Inverter with LCD Display for UPS status monitoring 2. Isolation NA 3. Input Voltage Range 160-270 VAC on full load 4. Input Power Factor )0.99 5. Input Frequency 45-55Hz 6. Out Put Voltage Single Phase 230 plus /-1%, 50Hz 7. Output Power Factor 0.8 8. Frequency 50Hz plus /-0.5% 9. Efficiency )85% 10. Wave Form Pure Sine wave 11. Total Harmonic Distortion (THD) (3% for linear load, (6% nonlinear load 12. Overload Capacity overload capacity upto 125% for 60 sec 13. Back up Time 1 Hr back up 14. Battery, Backup and with Battery Rack SMF Batteries with Minimum of 1 hr. With a Battery rack with a suitable inbuilt charger 17. Protections Low Battery, overload, over temperature, short circuit 18. Operating Temperature 0-40’C 19. Optional RS 232/USB, SNMP Compatibility 20. Noise: (50dB up to 1 meter 21. SNMP Port: Yes 22. Product Quality Standard and certification ISO 9001:2008, 14001:2004, CE, ROHS45001, 50001, 14025 and BIS Certification 23. Compatibility DG Set

Supply, Installation and Laying of 3 Core x 2.5 Sqmm Cu power cable.

Supply, Installation, Testing and Commissioning of Duplex Fiber Patch Cord SC-LC 3mtrs.

Supply, Installation, Testing and Commissioning of RJ-45 connectors for termination, Ferul tags for termination.

Supply, Installation, Testing and Commissioning of Cat-6A patch cord cable of 5 mtrs.

Supply, Installation, Testing and Commissioning of armored 6 Core Single mode Optical Fiber Cable, 9/125, Central Loose Tube Cables, High mechanical and full rodent protection provided by outdoor-corrugated steel tape armor (CST) complying to both 9/125 ITU G 652D and G 657A1 BI Standard.

Supply, Installation, Testing and Comissioning of EMS Server 1 no., Visitor Management 1 no., Video Management 1 no., Access Control 1 no., PIDS Server 1 no., IPPBX 1 no., PA 1 no., Prison Management 1 no.: 1. Type 2U Rack-mount 2. Processor Intel Xeon Processor, Two 20 Core/40 thread Processor or better 3. Frequency 2.3 GHz or better per processor RAM min 64 GB 4. Storage : min 2x480GB SSD or better in RAID 1 or better for OS and Application 5. RAID Raid 0/1/5/6/10 6. USB Port 2x USB 2.0 or better 7. RJ 45 2xRJ 45 Ports 8. Auto start/ resume Server should be capable of auto start/ resume operations post power fluctuation/ failure 9. Access Management Feature to limit access of data to users with access management software/tool/native storage feature 10. Power Source Redundant power Supply 11. Misc Display Screen Size - 21.5 inch or Higher with Keyboard, Mouse.

Supply, Installation, Testing and Commissioning of SQL Server 2022 Standard Edition with 30 Device CAL.

Supply, Installation, Testing and Commissioning of Antivirus software for one year.

Supply, Installation, Testing and Commissioning of IO Ports with Keystone and Face plate including accessories.

Supply, Installation, Testing and Commissioning of Furniture such as Table, chair with below specs: 1. Chair- With tilt mechanism, locking mechanism,360 degree rotating, height adjustment, 5 nos. wheels 2. Table- Desk based , single seater, length of table top min. 1200 mm, depth of table min 600mm, with minimum 3 nos. of drawer, locking facility.

1. Supply, Installation, Testing and Commissioning of IP Energizer with LCD, on board Programmable keys and Network controller (V1) Energizer with Charger. 2. Fence light to indicate status of the Fence. 3. Strobe light. 4. 12V / 100 dB Hooter with battery. 5. Outdoor console rack - IP 65 rating with Wall mount facility 6. Supply, Installation, Testing and Commissioning of Security Fence including other passive items such as cables, pole, Duct, strains, wire tightners, hooks etc. required as per solution 7. Warning sign board of 250 x 150 x 3 mm. Yellow background with Black color letters in Local language on one side and English on the other side in compliance with IEC standards 8. Supply, Installation, Testing and Commissioning of Electric Fence Software along with Master controller unit.

S/E of 2.5 sqmm x 3 core PVC insulated multi core copper conductor cable (armoured) 1100 volts grade (round) in existing pole/ pipe, complete in allrespect including making necessary connections. /[3Q]

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100mm dia (AS PER HPHC BRAND LIST )

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80 mm dia [3Q]

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 25 mm dia

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, 151 marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal

Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: Gun metal

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. (a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 (b) 20 mm nominal internal dia gun metal globe valve and nozzle. (c) Drum and brackets for fixing the equipment`s on wall. (d) Connections from riser with 25 mm dia stop gun metal valve and M.S. Pipe and socket. (DSR2022/18.17.1) 30 m size

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Stainless Steel (Grade 304)

Supply, Installation, Testing and Commissioning of UL/FM Certified Extinguishing agent filled in PESO Approved Filling Station: 4 Kg FK-5-1-12 Clean agent filled in PESO approved stored pressure type seamless steel cylinder as per IS 7285 (life 15years) with automatic type DLP valve assembly PI marked, TPED (Transportable Pressure Equipment Directive) approved, Used Standards for type approvals ISO 17871:2015 in conjunction with EN ISO 10297:2014 EN ISO 14246: 2017-12, Push in connector, End of line adapter, UL listed Pr. Switch, end of line plug, T connector, Safety Burst Disc at 28 Bar and Mounting Bracket. Stored Pressure type fitted with Pressure gauge, UV Resistance, Operating Pressure 15 bar, Hydraulic Pressure Tested to 250 bar, Burst Pressure at 350 bar, Red Powder coated. Certified by National Test House, Dept of Consumer Affairs, Govt. of India. system design as per NFPA 2001 and Installed as per LPS 1666.

Supply, Installation, Testing and Commissioning of UL/FM Certified Extinguishing agent filled in PESO Approved Filling Station: 2 Kg FK-5-1-12 Clean agent filled in PESO approved stored pressure type seamless steel cylinder as per IS 7285 (life 15years) with automatic type DLP valve assembly PI marked, TPED (Transportable Pressure Equipment Directive) approved, Used Standards for type approvals ISO 17871:2015 in conjunction with EN ISO 10297:2014 EN ISO 14246: 2017-12, Push in connector, End of line adapter, UL listed Pr. Switch, end of line plug, T connector, Safety Burst Disc at 28 Bar and Mounting Bracket. Stored Pressure type fitted with Pressure gauge, UV Resistance, Operating Pressure 15 bar, Hydraulic Pressure Tested to 250 bar, Burst Pressure at 350 bar, Red Powder coated. Certified by National Test House, Dept of Consumer Affairs, Govt. of India. system design as per NFPA 2001 and Installed as per LPS 1666

Supply, Installation, Testing and Commissioning of Master Control Unit inbuilt A/v alarm Control Panel along with sounder cum strobe of 24VDC operated red colour MS housing , 2 NO/NC potential free relay contact for Main Fire Alarm. Modbus for BMS Integration. Gas discharge led indicator, battery led indicator, system status Led indicator, AC power ON Led indicator.

Supply, Installation, Testing and Commissioning of UL Certified Linear pneumatic Heat Detection Tube (ID-6mm and OD-8mm) for automatic fire detection and suppression system made by special modified polyimide (PA), colour red RAL300, burst temperature 1310C, inner diameter 6mm, outer diameter 8mm. Pressurized with dry nitrogen at 15 bar pressure with all necessary fittings and supports. Certified by National Test House, Dept of Consumer Affairs, Govt. of India.

Supply, Installation, Testing and Commissioning of Chair: - 1. Synchro Mechanism: The 360° swivel along with Knee Tilt Synchro mechanism with three different tilt positions, supports healthy body movements and gives great back support. 2. Mesh Back: The back is made up of injection molded glass filled nylon and upholstered using mesh fabric with high tenacity yarn giving the perfect balance between form, functionality and comfort. 3. Adjustable Armrest: The adjustable armrest structure is powder coated and comes with 8 step adjustability. Lumbar Support: Adjustable lumbar support is provided by upholstered polypropylene pad with molded polyurethane foam.

Supply, Installation, Testing and Commissioning of New Modular Control Desk with Provision of 01 monitors, 01 CPU, 01 Operator, 01 keyboard and 01 Operator Console Size Considered: 750mm (H) x 750mm (W) x 1000mm (D). 1. Table top: - The material of the working surface shall be minimum 25 mm thick MDF with High-Pressure laminate. The proposed Control Desk’s life cycle should be assessed (from approved LCA consultant) for environmental impacts associated with all the stages of a product`s life for cradle to grave analysis. Valid report/document from UL/Intertek to be submitted along with the technical bid. 2. Modular removable PU nosing: The front edge of consoles is the component which comes in frequent contact of the operator. The soft polyurethane edge is meant to prevent injury (accidental impact) to operator during emergency and it also reduces the contact stress. In case of damage to this edge the desk design shall permit quick and easy replacement within half an hour without taking any shutdowns or removal of the tabletops. Audit certified design feature of modular PU Edge: High density poly-urethane molded on industrial grade aluminum core to form 50mm deep tapered edge to be installed on worktop. In case of damage or wear, the edge shall be mechanically replaceable within 30 minutes without opening or removing the worktop. Valid UL audit certificate to be submitted along with the technical bid. Extruded PU edging/ PVC T-beading shall be deemed unacceptable. 3. Structure: - 3.1 Made of heavy-duty extruded vertical and horizontal aluminium profiles. The extrusions shall be duly powder coated with 40 plus microns over all surfaces. All sheet metal parts shall be finished with a durable, black, electrostatic powder coating. OEM shall have a valid trademark registration certificate issued by the Government of India for the Control Desk proposed in this tender. Valid Trademark registration certificate to be submitted along with the technical bid. 3.2 To allow future extension and expansion, a weld-free system shall be proposed. Interconnecting joints shall not be visible. The structure shall be rigid enough to withstand BIFMA X5.5 tests. OEM shall have had BIFMA X5.5 certificate. The structure shall allow easy assembly of hinged shutters, slat wall, gland plate, and monitor arms in extremely rigid manner. Valid certificate of BIFMA X5.5 from authorized agencies to be submitted along with technical Bid. 3.3 The EPD (Environmental product declaration) of Control Desk shall be verified in accordance with ISO 14025 (from UL/Intertek) for Impacts on Environment by Control Desk. Valid report/document from UL/ Intertek to be submitted along with the technical bid. 4. Slat Wall: - Slat wall shall be made of approximately 2mm thick extruded aluminium (aluminium alloy). The proposed Control Desk shall be UL Listed and valid certificate to be submitted along with the technical bid. 5. Monitor Arm: - The Console shall feature ergonomic display mounting arms. It shall enable quick and easy replacement of VESA mounts and arm extensions as per the ergonomic. UL audit certified design feature of monitor arm assembly shall have auto lock, push and remove feature for quick release of VESA mounts and modular arm extensions for ease in maintenance and fixing of monitor by one technician within 30 seconds without using any tools. Valid UL audit certificates to be submitted along with the technical bid. 6. The proposed control desk shall be ANSI/BIFMA e3-2019 certified/tested at least for level 3 from UL/Intertek as per Furniture Sustainability Standard to identify the sustainability level of the furniture with respect to the environmental, health and wellness, and social impacts applicable to product(s). Valid certificate to be submitted along with the technical bid. 7. Shutters and Side Legs: - Front, and back shutters shall be of 18 mm Laminated MDF Board with premium finish. Side leg shall be of 25mm of the same finish. The side leg shall feature of illuminated strip on the periphery. The proposed console shall be Green guard Gold certified. Valid certificate from UL/ Intertek to be submitted along with the technical bid. 8. Cable Trays and Wiring: - The Console shall be designed with vertical and horizontal cable trays to allow for continuous cable management between the cabinets. Wire shall be routed into the cabinet through gland plate. The proposed console shall be RoHS Certified/tested from UL/Intertek and the valid certificate/ test report shall be submitted along with the technical bid. 9. Hardware: - All bolts shall be of SS material to avoid rust due to environment. The remaining hardware shall be Nickel Plated MS.

Supply, Installation, Testing and Commissioning of Cove light It will be a continuous rail of LED light, high brightness, neutral, or warm white with wall washing applications. Its slim profile and simple daisy-chain system allows high design flexibility to form long. 1) Light source: LED 2) Lumen output: 500 lm/m 3) Light color: 6500K 4) Power consumption: 3W/m to 5W/m 5) Operating Voltage Range (V) 100 – 300 6) Operating Frequency (Hz) 50 ± 3% 7) Colour: White 8) Lifetime: 15000 burning hrs. (At L70)

Supply, Installation, Testing and Commissioning of Round LED Ceiling Light (Static) High performance LED downlighter with high system efficacy for good quality and uniform lighting. Conforms to general lighting norms for office and other indoor applications. 1) Colour Temperature (K)- 3000 K / 4000 K / 5700K (as per site conditions) 2) LED Efficacy (lm/W) – 100 to 160 3) CRI )70 4) Power Consumption 6W to 24W 5) LED’s life )25,000 hours @ L70

Supply, Installation, Testing and Commissioning of Gypsum Ceiling: - The false ceiling shall consist of approximately 12 mm thick gypsum boards, supported by a structure formed of GI perimeter channels. The boards shall be affixed to the wall using wood screws and metal expansion raw plugs. The gypsum boards are manufactured from an aerated gypsum core with water-repellent additives, firmly bonded to strong paper liners. The surface of the gypsum boards shall be finished with plastic emulsion paint of an approved make and shade. The gypsum boards shall comply to below standards:1.1) Surface Spread of Flame (BS-476 -Part-7): The boards shall be classified as Class 1, ensuring a high level of fire resistance.1.2) Water Absorption Class (EN-520): The boards shall meet the requirements of Class H1, indicating efficient resistance to water absorption.

Supply, Installation, Testing and Commissioning of Designer Acoustic Metal False Ceiling: - 1) Factory made acoustic modular metal false ceiling of powder coated panels. Make shall comprise of perforated and non-perforated metal panels made through CNC laser Cutting, bending and punching. Panel shall be of 0.6mm CRCA sheet of approved powder coating finish. Panels shall be designed to achieve shape and design as per the design consultant with the combination of acrylic panels with lights, designed to enhance visual feel, with provision for easy installation and maintenance, integrated lighting and scope for integration of building services like HVAC and fire detection/ fighting system. The designer metal ceiling shall be Green guard gold tested/certified (from UL/Intertek). Valid certificate/test report to be submitted along with the technical bid. Metal modular false ceiling shall have Noise absorption coefficient (NRC) value 0.60 according to IS:8225-1987, ISO: 354- 1985 and ASTM 423-90. 2) It is well known that metal is resistant to fire as compared to wood and fabric. However, from fire and safety point of view, to ensure that the used material is not subjected to any kind of surface treatment which provokes fire. The proposed ceiling tiles shall be Class A certified as per ASTM e84 (from UL / Intertek) for surface spread of flame and smoke generation. This is mandatory to ensure that the materials used in the interiors do not provoke fire. Valid certificate/test report to be submitted along with the technical bid. 3) To ensure restriction of hazardous substances: so that the final product does not contaminate the environment and we give a healthy life to our coming generations it is necessary that the modular metal ceiling system shall be RoHS certified (from UL / Intertek). Valid certificate/test report to be submitted along with the technical bid. 4) To avoid dark spots/areas in the control room it is necessary that continuous linear lights are used across the width/length of the control room. UL audit certified design feature of integrated channel in ceiling for quick installation and replaceability of continuous linear light: The ceiling system having integrated inbuilt channel for installation of cove lights and shall permit quick and easy replacement of cove light without using any tools. Replacement to be carried out within 120 Seconds per meter. Valid certificate/test report to be submitted along with the technical bid. 5) Seismic safety of user and control room equipment is a prime concern area. The metal ceiling shall sustain the seismic vibrations as per design spectrum IS 1893 for zone 4 vibrations or better. The test shall be carried out by authorized government agency. Valid certificate/test report to be submitted along with the technical bid. 6) The proposed “Acoustic Modular Designer Control Room Interiors with Designer Metal Ceiling should be assessed (from an authorized practitioner of LCA) for environmental impacts associated with all the stages of a product`s life for cradle to gate with end of life. OEM shall have had valid report/document from UL/Intertek to be submitted along with the technical bid. 7) The EPD of the Acoustic Modular Designer Control Room Interiors shall be verified in accordance with ISO 14025:2006 and EN 15804:2012 plus A2:2019/AC:2021 (from UL/Intertek) for impacts on environment by Acoustic Modular Designer Control Room Interiors with Designer Metal Ceiling. The necessary certificate / test report should be valid on bid due date and to be submitted along with the technical bid. 8) Structure shall be made from heavy duty powder coated CRCA steel sheet (minimum sheet thickness 0.8 to 1.6mm). It shall be securely grouted from roof with help of anchor fastener and GI self threaded rods. It shall be formed with the help of slotted rolled W sections (stiffener) and Master C section with help of M6 cage nut and bolts.

Supply, Installation, Testing and Commissioning of 12mm Thick Frameless Tempered Clear Glass Door Size: - 1000mm X 2400mm (±100mm) With door spring and locking arrangements and both way handle and patch fittings.Specifications: Tempered glass is formed by heating glass to the softening point in a horizontal tempering stove, and then quickly cooling it.Properties: - 1) Safety (tempered): when broken, it spits into tiny harmless pieces. 2) Strong intensity: heat-strengthened glass is approximately twice as strong as annealed glass of the same thickness, and tempered glass is about 4 times. 3) Outstanding performance in resisting thermal stress and wind-load. 4) Tempered glass cannot be cut, drill hole and other further processed.

Supply, Installation, Testing and Commissioning of Modular Rigid PVC Metal Paneling: - 1) Factory made removable type self inter lockable metal panels with front sheet of Preformed Textured Hot dip galvanized sheet with rigid polyvinylchloride (PVC) film on one side and on the other side a coating to avoid rust (sheet thickness 0.6mm and PVC Coating atleast 0.11mm). The back cover of the panel shall be made up of 0.6mm thick CRCA/GI sheet of approved colour. The paneling design shall comprise of specially designed combination of perforated and nonperforated panels through CNC laser Cutting, bending and punching. Panels shall be designed to achieve shape and design as per the design consultant and shall be fixed using GI/CRCA hook fitting on structure. The metal paneling/ partition shall be Green guard gold tested/certified (from UL/Intertek). Valid certificate/test report to be submitted along with the technical bid. Overall system thickness for paneling shall be 60mm to 90mm. 2) Tiles Perforation – To achieve acoustics without deteriorating the aesthetical appeal of the control room it is necessary that the wall paneling shall have micro operations (less than 1.6mm diameter each) all over the surface with a density of 5000 holes per square feet. UL audit certified design feature on modular wall paneling tile having clean perforations and providing smooth finish on front fascia of tiles. The tile shall have 5000 holes per square feet on front side of the tile. Valid certificate/test report to be submitted along with the technical bid. 3) The modular metal paneling shall comply to the lead-free directive to ensure restriction of hazardous substances so that the final product does not contaminate the environment. The final product i.e., modular metal paneling does not contain hazardous substances and we give a healthy life to our coming generations it is necessary that the modular metal paneling system shall be RoHS certified/tested (from UL / Intertek). Valid certificate/test report to be submitted along with the technical bid. 4) Seismic safety of user and control room equipment is a prime concern area. The metal paneling shall sustain the seismic vibrations as per design spectrum IS 1893 for zone 4 or better vibrations. The test shall be carried out by authorized government agency. Valid certificate/test report to be submitted along with the technical bid. 5) The wall paneling shall be robust and strong enough to sustain the routine loads/minor impacts of typical control room environment. The wall paneling/ partition structure shall have UL Audit certified feature of Load bearing capacity of 300 Kgs to hold any display unit on clamp having minimum length of 750mm. Valid certificate/test report to be submitted along with the technical bid. 6) As control room is a mission critical area and in an unlikely case of damage to the existing wall paneling tiles the same shall be replaceable within 20 seconds and thereby preventing loss of time of operators and ongoing operations. UL Audit certified feature of Modular wall paneling tile having secure locking arrangement for equidistant mounting. Locking arrangement enables easy replacement without using any tool within 20 seconds. The feature shall provide easy flexibility of locking all tiles in one column through gravity. Valid certificate/test report to be submitted along with the technical bid. 7) The paneling and partition system shall qualify fire rating of at least 60 minutes in accordance with BS 476 Part 20 and 22. Valid certificate/test report to be submitted along with the technical bid. 8) The proposed “Acoustic Modular Designer Control Room Interiors with Modular Metal Paneling should be assessed (from an authorized practitioner of LCA) for environmental impacts associated with all the stages of a product`s life for cradle to gate with end of life. OEM shall have had valid report/ document from UL/Intertek to be submitted along with the technical bid. 9) The EPD of the Acoustic Modular Designer Control Room Interiors shall be verified in accordance with ISO 14025:2006 and EN 5804: 2012 plus A2 : 2019/ AC: 2021 (from UL/Intertek) for impacts on environment by Acoustic Modular Designer Control Room Interiors with Modular Metal Paneling. The necessary certificate / test report should be valid on bid due date and to be submitted along with the technical bid. 10) Structure shall be made from modular, heavy-duty powder coated CRCA frame (minimum sheet thickness 1mm) and shall allow uninterrupted flow of wires/cable/tubes of maximum diameter 25mm.

Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron bodyand bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house dulyinsulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 2850 lpm at 88 m Head

Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron bodyand bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 88 m Head

Providing and fixing of pressure switch in M.S. pipe line including connection etc. as required

Providing and fixing of pressure gauge in M.S. pipe line including connection etc. as required

Supply, Installation, Testing and Commissioning of Handheld thermal camera/ imager.

Supply, Installation, Testing and Commissioning of Hydraulic Tyre Killer - Height : 150mm Length : 4meters Mechanism : Hydraulic Power active 2 way spikes including all accessories and controllers should be integrated with the access control.

Supply, Installation, Testing and Commissioning of 55` LED Displays and wall mount with other accessories 55` 4K- Display UHD (3840 X 2160), min 500 Cd/m2 or better.

Supply, Installation, Testing and Commissioning of Counter UAV with the following : RF Detector RF Jammer Command and Control System.

Supply, Installation, Testing and Commissioning of Streaming Solution Device including audio system, microphones, Table and Chair in Admin Block Conference Hall with 03 seater AV enabled furniture including camera, table, Mini Desktop Computer, including cables and connectors etc.

Supply, Installation, Testing and Commissioning of Streaming Solution Device including audio system, microphones, Table and Chair in Admin Block Conference Hall with 10 seater AV enabled furniture including camera, table, Mini Desktop Computer, including cables and connectors etc.

Supply Installation Testing and Commissioning of 8 Port PoE plus Gigabit Managed Switches for Field equipment.

Supply, Installation, Testing and Commissioning of 24 Port L2 Managed Switch including all other accessories.

Supply, Installation, Testing and Commissioning of 24 Port L3 Managed Switch including all other accessories.

Supply, Installation, Testing and Commissioning of Key Management Solution Cabinet with 360 Keys provision including all other accessories (integration with access control system and prison management system)

Supply, Installation, Testing and Commissioning of Key Management Software with required licenses

Supply, Installation, Testing and Commissioning of Drone with Camera including hardware and software with other accessories support with all labour and petty material required to complete in all respect upto the entire satisfaction of Engineer-in-Charge

Supply, Installation, Testing and Commissioning of Next Gen Fire wall including all other accessories.

Supply, Installation, Testing and Commissioning of hand held rechargeable search light 1.WATTAGE: 10 Watt 2.BATTERY: Lithium lion 3.LAMP TYPE: LED 4. HIGHLY DURABLE BUILT: Fall Protection Body 5.DISTANCE VISIBILITY: 800 Mtrs. 6. FRONT GLASS: Poly Carbonate 8.BATTERY SPECS: Li-Ion 3.7 Volts 7.SOFT PRESS SWITCH: YES 8. BODY: Poly Carbonate plus ABS Plastic with Anti Slip Finish 9. FUNCTION (Side Lights): A. Emergency Light(White)-100% and 50%, B. Flasher(Red)-Flashing at 100%. 10.CHARGING TIME: 3.5 Hrs WORKING TIME: 100% Brightness - 5 Hrs, 50%Brightness - 10 Hrs 11. CHARGING TIME: 3.5 Hrs 12. BATTERY STATUS INDICATOR: YES 13. BATTERY BANK: Yes 14. CHARGING PORT: Micro USB

Supply, Installation, Testing and Commissioning of 2 x 2 55 inch Led Video Wall with controller and Mounting Including All other accessories like HDMI cabling. 1.8mm Bezel Width, 4K -UHD- 24 x 7.

Supply, Installation, Testing and Commissioning of 3 x 2 55 inch Led Video Wall with controller and Mounting Including All other accessories like HDMI cabling. 1.8mm Bezel Width, 4K -UHD- 24 x 7.

Supply, Installation, Testing and Commissioning of 42 U Rack with 04 no. Smart Rack with integrated Hot and cold aisle containment.

Supply, Installation, Testing and Commissioning of 36 U Smart Rack integrated Hot and cold aisle containment.

Supply, Installation, Testing and Commissioning of Heavy Duty electro mechanical gate locks for Access Control (For Cell Block and Cell Area).

Supply, Installation, Testing and Commissioning of Electric strike locks for other gates.

Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories (iii) Horizontal side wall Sprinkler

Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required. (iv) 100mm dia

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. (ii) 100 MM dia

Providing laying, testing and commissioning of `C` class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. (i) 150mm dia

1st Year Operation and maintenance of the items installed and commissioned as mentioned below: 34 IP PTZ Camera, 561 IP Dome network cameras, 89 IP Bullet cameras, 2 Thermal PTZ cameras, 30 Body Worn Camera, Access Control System (74 nos. of Biometric Machines with controller, 71 nos. of RFID card readers with controller, 2 nos. UHF Readers, 4 nos. of Full Height Turnstile with controller, 2 nos. of Automatic Boom Barriers, 3 nos. of Road blocker, 3 nos. of DFMD, 3 Public Address System, 45 nos. of IP Speakers with Broadcasting system, IP Based high quality Gooseneck Mic for PA, Emergency SoS button (68 nos. of IP SOS Buttons), Perimeter Intrusion Detection System and Electric Fence (Approximately 2000m of SM FO cable, Approximately 700m of electric fence), X-Ray Baggage (2 nos. of Baggage Scanner), Other systems (1 no. of Under Vehicle Scanning System (UVSS), (1 no. of Counter UAV (Anti drone), 1 no. of Drone with camera), Video Conferencing (1 no. of VC system with 10-seater capacity, 18 nos. rooms with 3-seater capacity), Compute and storage (30 days of audio and video recording storage for all Cameras and incident based recording for 60 days at 20FPS in 1080p resolution with H.265 compression rate, POS (Canteen Kiosk) (3 Nos. of Vandal Proof SS POS (Canteen) Kiosk), TV Broadcasting System (23 nos. of 55” display with software), Power backup (online UPS) (1 KVA, 3KVA, 5KVA and 15 KVA UPS with 1 hrs back-up), Control Room, Air Conditioning at the control room, Earthing, Furniture, Fire protection equipment, Lock and key provision for control rooms, Hardware (55” 24x7 LED Display, Local area network connecting the cameras to the control room of jail in charge via optical fiber cable, Network rack with all required accessories, UPS (2KVA and 5 KVA) with a minimum 4 -hour backup and earthing wherever applicable, Internet broadband connectivity) Others (Earthing, surge protector in Rack PDU and passive cabling etc.) including software of above mentioned hardware.

2nd year Operation and maintenance of the items installed and commissioned as mentioned below: 34 IP PTZ Camera, 561 IP Dome network cameras, 89 IP Bullet cameras, 2 Thermal PTZ cameras, 30 Body Worn Camera, Access Control System (74 nos. of Biometric Machines with controller, 71 nos. of RFID card readers with controller, 2 nos. UHF Readers, 4 nos. of Full Height Turnstile with controller, 2 nos. of Automatic Boom Barriers, 3 nos. of Road blocker, 3 nos. of DFMD, 3 Public Address System, 45 nos. of IP Speakers with Broadcasting system, IP Based high quality Gooseneck Mic for PA, Emergency SoS button (68 nos. of IP SOS Buttons), Perimeter Intrusion Detection System and Electric Fence (Approximately 2000m of SM FO cable, Approximately 700m of electric fence), X-Ray Baggage (2 nos. of Baggage Scanner), Other systems (1 no. of Under Vehicle Scanning System (UVSS), (1 no. of Counter UAV (Anti drone), 1 no. of Drone with camera), Video Conferencing (1 no. of VC system with 10-seater capacity, 18 nos. rooms with 3-seater capacity), Compute and storage (30 days of audio and video recording storage for all Cameras and incident based recording for 60 days at 20FPS in 1080p resolution with H.265 compression rate, POS (Canteen Kiosk) (3 Nos. of Vandal Proof SS POS (Canteen) Kiosk), TV Broadcasting System (23 nos. of 55” display with software), Power backup (online UPS) (1 KVA, 3KVA, 5KVA and 15 KVA UPS with 1 Hrs. back-up), Control Room, Air Conditioning at the control room, Earthing, Furniture, Fire protection equipment, Lock and key provision for control rooms, Hardware (55” 24x7 LED Display, Local area network connecting the cameras to the control room of jail in charge via optical fiber cable, Network rack with all required accessories, UPS (2KVA and 5 KVA) with a minimum 4 -hour backup and earthing wherever applicable, Internet broadband connectivity) Others (Earthing, surge protector in Rack PDU and passive cabling etc.) including software of above mentioned hardware.

3rd year Operation and maintenance of the items installed and commissioned as mentioned below: 34 IP PTZ Camera, 561 IP Dome network cameras, 89 IP Bullet cameras, 2 Thermal PTZ cameras, 30 Body Worn Camera, Access Control System (74 nos. of Biometric Machines with controller, 71 nos. of RFID card readers with controller, 2 nos. UHF Readers, 4 nos. of Full Height Turnstile with controller, 2 nos. of Automatic Boom Barriers, 3 nos. of Road blocker, 3 nos. of DFMD, 3 Public Address System, 45 nos. of IP Speakers with Broadcasting system, IP Based high quality Gooseneck Mic for PA, Emergency SoS button (68 nos. of IP SOS Buttons), Perimeter Intrusion Detection System and Electric Fence (Approximately 2000m of SM FO cable, Approximately 700m of electric fence), X-Ray Baggage (2 nos. of Baggage Scanner), Other systems (1 no. of Under Vehicle Scanning System (UVSS), (1 no. of Counter UAV (Anti drone), 1 no. of Drone with camera), Video Conferencing (1 no. of VC system with 10-seater capacity, 18 nos. rooms with 3-seater capacity), Compute and storage (30 days of audio and video recording storage for all Cameras and incident based recording for 60 days at 20FPS in 1080p resolution with H.265 compression rate, POS (Canteen Kiosk) (3 Nos. of Vandal Proof SS POS (Canteen) Kiosk), TV Broadcasting System (23 nos. of 55” display with software), Power backup (online UPS) (1 KVA, 3KVA, 5KVA and 15 KVA UPS with 1 Hrs back-up), Control Room, Air Conditioning at the control room, Earthing, Furniture, Fire protection equipment, Lock and key provision for control rooms, Hardware (55” 24x7 LED Display, Local area network connecting the cameras to the control room of jail in charge via optical fiber cable, Network rack with all required accessories, UPS (2KVA and 5 KVA) with a minimum 4 -hour backup and earthing wherever applicable, Internet broadband connectivity) Others (Earthing, surge protector in Rack PDU and passive cabling etc.) including software of above mentioned hardware.

4th year Operation and maintenance of the items installed and commissioned as mentioned below: 34 IP PTZ Camera, 561 IP Dome network cameras, 89 IP Bullet cameras, 2 Thermal PTZ cameras, 30 Body Worn Camera, Access Control System (74 nos. of Biometric Machines with controller, 71 nos. of RFID card readers with controller, 2 nos. UHF Readers, 4 nos. of Full Height Turnstile with controller, 2 nos. of Automatic Boom Barriers, 3 nos. of Road blocker, 3 nos. of DFMD, 3 Public Address System, 45 nos. of IP Speakers with Broadcasting system, IP Based high quality Gooseneck Mic for PA, Emergency SoS button (68 nos. of IP SOS Buttons), Perimeter Intrusion Detection System and Electric Fence (Approximately 2000m of SM FO cable, Approximately 700m of electric fence), X-Ray Baggage (2 nos. of Baggage Scanner), Other systems (1 no. of Under Vehicle Scanning System (UVSS), (1 no. of Counter UAV (Anti drone), 1 no. of Drone with camera), Video Conferencing (1 no. of VC system with 10-seater capacity, 18 nos. rooms with 3-seater capacity), Compute and storage (30 days of audio and video recording storage for all Cameras and incident based recording for 60 days at 20FPS in 1080p resolution with H.265 compression rate, POS (Canteen Kiosk) (3 Nos. of Vandal Proof SS POS (Canteen) Kiosk), TV Broadcasting System (23 nos. of 55” display with software), Power backup (online UPS) (1 KVA, 3KVA, 5KVA and 15 KVA UPS with 1 Hrs back-up), Control Room, Air Conditioning at the control room, Earthing, Furniture, Fire protection equipment, Lock and key provision for control rooms, Hardware (55” 24x7 LED Display, Local area network connecting the cameras to the control room of jail in charge via optical fiber cable, Network rack with all required accessories, UPS (2KVA and 5 KVA) with a minimum 4 -hour backup and earthing wherever applicable, Internet broadband connectivity) Others (Earthing, surge protector in Rack PDU and passive cabling etc.) including software of above mentioned hardware.

5th year Operation and maintenance of the items installed and commissioned as mentioned below: 34 IP PTZ Camera, 561 IP Dome network cameras, 89 IP Bullet cameras, 2 Thermal PTZ cameras, 30 Body Worn Camera, Access Control System (74 nos. of Biometric Machines with controller, 71 nos. of RFID card readers with controller, 2 nos. UHF Readers, 4 nos. of Full Height Turnstile with controller, 2 nos. of Automatic Boom Barriers, 3 nos. of Road blocker, 3 nos. of DFMD, 3 Public Address System, 45 nos. of IP Speakers with Broadcasting system, IP Based high quality Gooseneck Mic for PA, Emergency SoS button (68 nos. of IP SOS Buttons), Perimeter Intrusion Detection System and Electric Fence (Approximately 2000m of SM FO cable, Approximately 700m of electric fence), X-Ray Baggage (2 nos. of Baggage Scanner), Other systems (1 no. of Under Vehicle Scanning System (UVSS), (1 no. of Counter UAV (Anti drone), 1 no. of Drone with camera), Video Conferencing (1 no. of VC system with 10-seater capacity, 18 nos. rooms with 3-seater capacity), Compute and storage (30 days of audio and video recording storage for all Cameras and incident based recording for 60 days at 20FPS in 1080p resolution with H.265 compression rate, POS (Canteen Kiosk) (3 Nos. of Vandal Proof SS POS (Canteen) Kiosk), TV Broadcasting System (23 nos. of 55” display with software), Power backup (online UPS) (1 KVA, 3KVA, 5KVA and 15 KVA UPS with 1 Hrs back-up), Control Room, Air Conditioning at the control room, Earthing, Furniture, Fire protection equipment, Lock and key provision for control rooms, Hardware (55” 24x7 LED Display, Local area network connecting the cameras to the control room of jail in charge via optical fiber cable, Network rack with all required accessories, UPS (2KVA and 5 KVA) with a minimum 4 -hour backup and earthing wherever applicable, Internet broadband connectivity) Others (Earthing, surge protector in Rack PDU and passive cabling etc.) including software of above mentioned hardware.

WILLSTRONG SOLUTIONS PRIVATE LIMITED (BID ID -1207583)

VOLKSARA TECHNO SOLUTIONS PVT. LTD. (BID ID -1199042)