Special repairs in OH(Transmission) Shop in Old Facility of HVF Factory

Amount

Dismantling of false ceiling boards(fibre, pulp, insulation etc.,) or insulation boards/slabs. blankets of any thickness and removing to CE Stores as directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) and Removing to or from store.

Taken down door/window frame with shutter exc 1.5sq.m but exc 4 sq.m and handing over the same to CE(STORES)

Dismantling of floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises.

Demolition of brickwork or stone/boulder masonry, built in lime mortar/ cement motar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articlesbuilt in cement motar.

Dismantling structural steel work including doors, gates but excluding framed truss etc.,

M&L For Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc

Dismantling of asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings.

Taking down cement plaster on brick or stone walls tiles etc,including ranking out, joints ,hacking for keys scrubbing down with water,etc.

Material and labour for dubbing out average (CM 1:6 )10 mm thick on irregular face off walls (when specifically ordered in eriting)

M&L for Plastering with 1:4,15mm thick on faces of old brick work and concrete surfaces.

Material and labour for plastering in CM 1:3, on fair faces of ceiling 12 mm thick .

Hacking out plaster 15cm vide on either sides of the crack cutting of 6mm ' V ' groove by inserting chicken mesh in the gaps of wall and applying pressure grouting the cracks with a mixure of CERA POLY CRACK FILLER,crack fill of Bostik or equivalent in STP,BASF,CIPY and finishing to the original shape.

M & L for 25mm thick granite (of any type) work (table rubbed and olished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Grove cutting in granite for raiser step including cleaning the area. The grove to be cut shall be 2 Nos per rise. The tread width will be considered for the measurement.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of ancolour having tensilestrength of 550 Mpa as inroof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified .

M &L for virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer in CM1:3, 20mm thick for laying floor finishes.

Material and Labour for Glazed ceramic Coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed in CM 1:4 15mm thick complete.

Material and labour for brick work built in CM 1:6 using sub-class ''B'' bricks ,straight or curved on plain exc 6m mean radius.

S&F of first class hard wood plain,solid ,straight ,chowkats, and frames ,wrought,framed rebated on the solid ,rounded or chamfered,put together with glue pinned at joints, supplied and fixed.

S&F of first class hard wood 30MM thich Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), orof veneered particle board edium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

S & F of (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less thans 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified .

S&F of frame size 65X100mm factory made single extruded WPC(wood polymer composite) solid door/ window/ clerestory window& desertory other frames/chowkat comprising of virgin PVC polymer of k value 58-60(suspension grade), calcium carbonate and natural fiber(wood power)/rice husk/wheat husk and non toxic additives(maximum toxicity index of 12 for 100mgs) fabricated with miter joints after applying PVS solvent cement screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrawl strength of 2200N (face)&1100N (edge) minimum compressive strength of 58N/mm2, modulus of elasticity 900N/mm2 and resistence to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteeners of required dia and length complete as per direction of engineer-in-charge.(MS hold fast/lugs or SS fasteners shall be paid for separately.

S&F of 30mm thick factory made single extruded WPC(wood polymer composite) solid plain flush door shutter or required size comprising of virgin polymer of k value 58-60(suspension grade), calcium carbonate and natural fiber(wood power)/rice husk/wheat husk and non toxic additives(maximum toxicity index of 12 for 100mgs) having minimum density of 650kg/cum, screw withdrawl strength of 1800N (face)& 900N (edge) minimum compressive strength of 50N/mm2, modulus of elasticity 850N/mm2 and resistence to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star head counter sunk SS screws, all as per direction of engineer-in-charge.

S&F of 30mm thick main door design engraved factory made single extruded WPC(wood polymer composite) solid plain flush door shutter or required size comprising of virgin polymer of k value 58-60(suspension grade), calcium carbonate and natural fiber(wood power)/rice husk/wheat husk and non toxic additives(maximum toxicity index of 12 for 100mgs) having minimum density of 650kg/cum, screw withdrawl strength of 1800N (face)& 900N (edge) minimum compressive strength of 50N/mm2, modulus of elasticity 850N/mm2 and resistence to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star head counter sunk SS screws, all as per direction of engineer-in-charge.

S/F of Aluminium anodised,Barrel tower bolts (150mm) of extruded section and fixed.

S/F of butt hinges (125mm) cast, brass with mild steel hinge pin,bright polished and fixed but type B-12

S/F of Aluminium handles (150 mm), cast type,anodised

Supply and Fixing of aluminium anodised, skeleton tower 450 mm bolts with plate, staples and bolt of extruded section and fixed.

S & F of Aluminium(Die cast body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S & F of 5.5 mm thick Sheet glass, ordinary quality and glazing rubber beading with in square exc 0.5 sq.m in each pane as required for the alumnimum partition .

Taking up or down steel tubing 25 or 32 mm dia pipe and connections, including cleaning for refixing or removal to CE store.

Taking up or down steel tubing of bore 20mm and connection including cleaning for refixing or removal to CE/E store.(Including all accessories).

Taking up or down steel tubing of bore 15mm and connection including cleaning for refixing or removal to CE/E store.(Including all accessories).

cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 for water tubing etc., and making good , cutting not exceeding 10cm girth in brick wall.

Cutting out Cement mortar 1:6 bricks,forming toothing for,and bonding new into old work including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only) .

Forming jambs,Cement mortar 1:4 or cement lime mortar 1:2:9 etc. to openings (to foregoing item), including cutting,toothing and properly bonding into old work,also facing, jointing and pointing to match existing work, complete .

Supplying and laying of CPVC pipes 32 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of CPVC pipes 20 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of CPVC pipes 16 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F of Rotational moulded polye-thylene water storage tanks (cylindrical verticalwith closed top) hoistedand fixed in position all as specified(1000 litres)

Supply and fixing of vitreous China wash basin, white, flat back, size 580x450 Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand fixed in repair. 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15 mm bore dia and fixed

Supply and Fixing of PVC gully trap 125/110mm setting and jointing with grating plate

S & F of PVC floor trap 75mm dia outlet of with grating and connecting PVC extension pipe including jointing with solvent cement etc., complete

S & F of PVC 75mm dia Pipes single socketed, in any length with rubber ring joints laid in trenches or in floors.

S & F of PVC (SWR) 110mm dia Pipes single socketed, in any length with rubber ring joints laid in trenches or in wall.

S & F of PVC Bend with door 75 mm dia any radius,

S & F of PVC Bend with door 110mm dia any radius,

S & F of PVC Tee with door 110mm dia any radius,

S & F for 110mm PVC (SWR) Vent cowl.

S & F of Gun-metal (32mm) , globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed.

S & F of Gun-metal (25mm) , globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed.

S & F of 20mm Ball valves set Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s

Supply and fixing of cast copper alloy screwed down, high pressure stop cock /angle cock fancy type chromium olated concealed type of size 15mm

Supply and Fixing of Vitreous China urinals, bowl type flat back of size 465X355X265mm white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; inculding 32 mm connector pipe,stop cock15mm and waste pipe and removing old damaged urinal etc complete

Supply and Fixing of swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms)

Supply and Fixing of vitreous china Squatt pan of pattern '' long pan size 580mm white with "P" or "S" trap ,front or back inlet and foot rests ,any pattern including provision of lime concrete beddig PVC valveless 10 litres, syphonic action type , flushing cistern ,low level , white with inlet ,ball valves,float and handle including brackets Flush pipe of polyethylene of low of high density of PVC ,32 mm dia for low level cistern.

Supply and fixing of EWC Vitreous china wash dowan water closet pan (pedestal pattern) white with "P" or "S" trap including wash down water closet( pedestal pattern) complete high or low level flushing cistern and connections to pipes and fixing of chain and pull, or lever ,if PVC valveless syphonic action type, flushing cistern 10 liters capacity ,low level ,white with inlet ball valves ,flot and handle including bracket.

Supply & Fixing of PTMT health facuet with 1.5 M long hose and apporoved colour

S & F of 15 mm fancy type bib tap to bore dia of 15 mm pipe standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-105gms)

S & F of Pillar cock chromium plated to wash basin 15mm dia ditto, but fancy type, with capstan heads, screwed down high pressure with long screwed shanks for iron pipe.

S&F for Anodised aluminium snap grid 605 x 605 mm frame work for false ceiling all as specified.

M&L for Exposed metal frame ceiling with 8 mm thick calcium silicate board of siliceous and calcareous material reinforcedwith cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately.

M&L for Excavating in post holes hard/dense (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm.

M&L for sand filling under foundations,flooring,etc,including watering and consolidation.

M & L for P.C.C 1:4:8, D2 type using 40mm graded aggregated Cement concrete in foundations,filling and mass concrete in foundation.

M&L for cement concrete in foundation ,filling and mass concrete typeB2 1:2:4 using 20mm aggregate.

Suppy and fixing of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes on forming to I. S.1161- 1979 grade St.-240 .

Supply & fixing of anodised aluminium frame for partition , doors, windows with one or more rebates including joining cleat for fixing and power coating etc, complete all as specified

Supply and fixing of Prelaminated particle board 12 mm thick ,with both side decorative choice lamination

Complete removal of existing treatment on internal wall surfaces

Material and labour for applying two coats of internal emulsion paint with one coat primer on internal wall of old painted surfaces all complete.

Material and labour for white washing on ceiling with two coats including preparation of new ceiling surfaces.

Material and labour for painting board in ceiling with one coat of pink primer over two coat of sythetic enamel paint including paint including preparation of new surfaces for which board.

Material and labour for painting steel surfaces of any description over 10cm width or grith with two coats of synthetic enamel paint over a coat of primer including preparing new surfaces .

Material and labour for painting two coats of synthetic enamel paint with one coat primer on new wood surfaces including preparation of new surfaces.

Removal of excavated rocks exceeding 250m but not exceeding 500m and depositing where directed.

Supply and Fixing one light point or one fan point wiring controlled by one switch with PVC single core cables 1.5 Sq mm size in PVC coduit Make: Finolex/ Polycab /Orbit/Havells or Suitably Equivalent make.

Material and Labour wiring for circuit / sub main wiring alongwith earth wire 2 X 2.5 Sq.mm PVC insulated copper conductor single core cable surface / recessed as required in PVC conduit along with earth wire size 1 X 2.5 Sq.mm.including PVC conduit & accessories.

Material and Labour wiring for circuit / sub main wiring alongwith earth wire 2x4.0 Sq.mm PVC insulated copper conductor single core cable surface / recessed as required in PVC conduit along with earth wire size 1 X 4.0 Sq.mm.including PVC conduit & accessories.

Supply and Fixing PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size Ditto, but 350 x 300 x 50 mm deep ®

Supply and fixing of Switch socket combination 6A/16A, 5 in 1, flush type Make: ANCHOR/ HAVELS/ Legrand /Schneider/GM or Suitably Equivalent make.

Supply and fixing of switch flush type, 6 amps, single pole, one way. Make: ANCHOR/ HAVELS/Legrand/ Schneider /GM or Suitably Equivalent make.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. ® Make: Philips/Havells/Osram or Suitably Equivalent make.

Supply and fixing of PVC/Polycorbonate, isolated ceiling rose . Make: ANCHOR/HAVELS/ZEN/KUNDAN or Suitably Equivalent make.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 20 cm girth in brick walls.

Supply and fixing Single pole enclosure with a two pin and earth plug and socket complete with one single pole MCB 240 V 20amp Make: STANDARD/ HAVELS/SIEMENS/ LEGREND or Suitably Equivalent make.

Supply & fixing of Four pole Isolater, 415V, 100A. Make: STANDARD/ HAVELS/SIEMENS/ LEGREND or Suitably Equivalent make.

Supply and Fixing 240V Isolator/MCB SP upto 40A, Make: STANDARD/ HAVELS/SIEMENS/ LEGREND or Suitably Equivalent make.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Make: Havells/ Crompton/ Usha/ Orient/ Bajaj or Suitably Equivalent make.

Supply and fixing of Double door sheet metal enclosuer for DB's when MCB 's to be used Triple pole and neutral 8 way, 415 volt, AC. Make: STANDARD/ HAVELS/ SIEMENS/ LEGREND or Suitably Equivalent make.

Supply and fixing of Double door sheet metal enclosure for DB's when MCB 's to be used Single pole and neutral 4 way, with 200A rated bus, 240 volt, AC. Make: STANDARD/ HAWELS/ SIEMENS/ LEGREND or Suitably Equivalent make.

Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers. Make : USHA/ HAVELLS/ BAJAJ/ CROMPTON or Suitably Equivalent make.

Taking down carefully copper / aluminum point wiring (light, fan, socket or power) complete, (fittings such us switches, ceiling roses, pendants, regulators, sockets etc. to be measured separately), removing materials to store for keeping inside safe custody for re – use at site and making good disturbed surfaces of walls, floors, etc

Taking down carefully unscrewing from boards/out-let boxes, fittings and fixtures such as switches sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for re-use at site or carrying to the store (To be measured only when found service cable in all respects complete for re-use).

Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make: PHILLIPS/ BAJAJ/ HAVELS/ CROMPTON or Suitably Equivalent make.

VIJAYALAKSHMI ENETERPRISES

M/s.MSK Construction