59/EUCC-V/LESA/2023-24

Amount

Dragging, loading, carriage and unloading of following store materials with proper stacking from ESC Daliganj to JE dumps store and from JE dump store to work site within municipal area.

33KV 3X300 SQ MM XLPE CABLE

33 KV ST/TH C/J KIT 3X300 SQ MM

33KV END TERMINATION O/DOOR 3X300 SQ MM

33 KV BUS ISOLATOR 800 AMP

ACSR PANTHER CONDUCTOR

Disc Insulator 70 KN 33 KV

Disc Fitting 70 KN 33 KV

STP 11 M long

33 KV pin insulator

Top channel 100X50 MM 10 kg / mtr

MS angle 65x65x6MM 5.8 kg / mtr

33 KV pin with nut

M S Earthing Rod 20x2500 mm

LT XLPE Cable AL.1X400 Sq.mm.

MS channel 100x50 mm

MS Angle 75x75x6, 2.6M 2 Nos Total [email protected] Kg./M with wastage

Rail 105 lb 9 mtr long

M.S.Channel 125x65x6 mm

M.S. Angle 65x65x6 mm

Laying of double CKT 33 KV 3x300 sq mm XLPE cable in digging of trench 1100 mm, deep, 650 mm wide its boxing with brick,sand,stone slab after laying of cable filling and proper levelling& ramming. The ferruling of cable also include in this work

Laying of double CKT 33 KV 3x300 sq mm XLPE cable in by HDD method as per Norms. The ferruling of cable also include in this work

Laying of double CKT 33 KV 3x300 sq mm XLPE By dirll method with MS/ GI Pipe 160 mm dia

Laying of double CKT 33 KV 3x300 sq mm XLPE By dirll method with HDPE Pipe 160 mm dia

Fabrication, erection, grouting, plinthing & painting of double pole for 33 KV cable exposure on ST. Pole 11 Mtr long with fixing of necessary clamp channel ,angle 33 KV Pin & pin insulator making double ckt 3 phase 3 wire bus bar for separate cable with single core cable including electrode earthing , danger boared,barbed wire complete in all repect as per RESPO Norms .

Hoisting of 3x300 sq mm sizes of 33 KV single cable on existing/erected double pole including GI pipe 3 mtr long 6'' dia including jumpering,dressing of cable with required all necessary clamps and nut, bolts.

Digging of Pit in kachcha/Pakka land in 1.2 mtr deep 3 mtr long and 2 mtr wide for 33 KV ST/TH 3x300 sq mm and boxing with brick sand and stone slab as per norms.

High Pressure Testing and fault location of 33 KV cables/line as per norms

Pipe Boring type earthing complete upto water level/ minimum 20 mtr deep from ground level complete Job with connection of quipment by 50x6 mm GI Strip

Fabrication & Erection of cable stand made of two nos MS channel 100x50x3 mtr. Long jointed to each other by means of 05 nos MS strip 50x6 mm of size 150 mm Long each by welding at equal distance interval as per norms and grouting in block of 300x300x700 completely providing two nos cable clamp also.(All materials will provide by contractor except MS channel).

Isolator Structure-Fabrication of Isolator structure minimum 3.5 mtr overall height and 2.5 mtr above ground level as per RESSPO drawing, with help of M.S channel 125x65 mm two pieces of M.S channel joined to each other by M.S flat 50x6 mm, diagonally at the interval of 0.5 mtr and top & bottom of the structure. Grouting of Isolator structure in CC (cement ,coarse sand and stone grit of 20 mm gauge) including supply of necessary T&P and painting os structure complete.(only M.S channel and angle provided by the deptt)

Painting of all existing and new structures equipment

Mounting of accessories/equipment on fabricated structure complete work with making proper alignment and tightening the work includes fabrication work if required for proper operation of equipment .

Bus/Line Isolator

Erection of Bus bar gantry

Stringing, sagging, jumpering of bus bar gantry with ACSR panther conductor 3Phase 3wire.

Providing & making heat & shrinkable joint of 33 KV 3Х300 sqmm touch proof I/D J/KIT

Hoisting of 33 KV, 3x300 sq mm cable on cable stand

ARIHANT ELECTRIC COMPANY

KHUSHI ENTERPRISES