Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.3 LAccepted-AOC | L1 | Accepted-AOC Lower Value | |
| 2 | L2₹23.4 L+₹1.1 L (4.85%)Rejected-AOC NO 31 33 16 AM CHURCH STREET CUMBAM THENI DISTRICT | CUMBAM | THENI | TAMIL NADU | L2 | Rejected-AOC Higher Value |
Tender Value
Refer Docs
EMD Value
₹27,000
Closing Date
28 Dec 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Officer, Hanumanthanpatti Town Panchayat
Hanumanthanpatti Town Panchayat, Theni District
Amrut 2.0 2023 - 2024 - Green space Development at Ward 1, S.F. No.505-1 North Street in Hanumanthanpatti Town panchayat, Theni District
2023_DTP_398837_1
55/2023
Open Tender
Civil Works - Others
Works
180 days
Hanumanthanpatti Town Panchayat limit
As per tender document
3 documents required · 3 mandatory
₹0
₹27,000
Hanumanthanpatti Town Panchayat
5 Jan 2024
13 Dec 2023
28 Dec 2023
13 Dec 2023
28 Dec 2023
13 Dec 2023
13 Dec 2023 - 28 Dec 2023
15 Dec 2023
Amount
Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10 with standard specifications.
Plain Cement concrete of mix 1:4:8 (One cement four M-sand eight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including labour charges, transporting and placing in position including shoring, strutting forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification.
Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.
Coloumn
Grade beam
Collection supply and filling of Stone Dust of approved quarry including cost and Conveyance of all materials to site and all labor charges for filling etc., Complete.
Reinforced Cement Concrete 1:1½:3 Mix (One Part of cement, one and half Part of M- Sand and three Part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications. TNDSS NO: 30 V, VI (S3), VII-3.
Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.
Brick Work in Cement Mortor 1:5 Mix (one cement, five M.sand) using Country Bricks of size 8 3/4 x 4 1/4 x 2 3/4 mm from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications
Plastering with cement mortar 1: 5 ( one cement and five P.Sand) mix to 12mm thick including cost and conveyance of all materials to site including curing etc.,complete as per standard specification – 10m2
Painting the new walls two coats over one coat of priming with best Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers etc., complete complying with standard specifications.
Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.
Painting the New Iron works two coats over one coat of priming coat including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers etc., complete complying with standard specifications.
Plain Cement Concrete 1:2:4 Mix (one Part of cement, two Part of M- Sand and four Part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.
Providing and laying spreading and compacting graded stone aggregates to wet mix Macadam 250mm thick specificatin including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material tiãr to site laying int uniform layers withpavers in sub base/ base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of materials, labour charges , rentals for machinery , fuel and all other incidental charges etc., complete as per clause 406 of MORTH
Supplying and Laying of CC Paver block (Heavy duty) of approved design (Made of Minimum M40 mix ) having a Minimum Thickness of 63mm and Rubbersied Surface area of approved shape, size and colour with top finished with ironide powder for a minimum thickness of 5mm using Hydraulic machine make it water resistance and Non skid surface and laying the same duly spereading sand on the prepared surface for thickness upto 50mm (minimum 25mm) and setting to correct propile and level in exact possition and spreading sand over paver block to fill joints between the blocks and compacting table viberator incluidng correction in level removing surpulus sand to ensure perfect interlocking and providing necessory curbing all around as required for support etc complete as directed by the Engineer incharge and the block shall have a minimum compressive strength of 350kg/Sq.cm and Water absorbtion less than 4.00 for 1.00 Sqm.
Providing Three Seater arrangements with Granite Slabs over the 100mm thick Precast Slab with nominal reinforcements and 230mm thick, 600mm height side Brick walls and Plastered with C.M. 1:5, 12mm thick, Emulsion Painting two coats. The cost shall include all labour and materials and as directed by the departmental officers.
6 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 6000mm Length Length in control box with foundation hardwares. etc complete as per standard specification. As per PWD SOR Page No : Data (13 xv ) 1.(a)
Supply and Fixing of 30 W LED Street Light Fittings as per PWD SOR P.No.69 etc complete as per standard specification. As per TWAD SOR Electrical items Sl.No : 17 a
Supply and laying of 2 x 16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.Ele. Data 2023-24 S
Charges for conducting Geological survey
Drilling of 150mm dia vertical bore well in hard rock area using bore well rig including conveyance and erecting of rig and all labor charges etc
Supply and fixing of 150mm CS dia PVC casing pipe including cost of materials and all labor charges etc.,
Supply and delivery of Water supply Materials inculding loading, unloding and transporting etc., complete
2 HP Submercible motor(Motor should give 20lpm x 150 m head)
2 HP Panel board
2.50 sq.mm submercible cable
32m dia ISI UPVC Pipe
1000 litres capacity HDPE tank
32 m dia.Non-Return Valve
32 mm dia. Hex Nipple
32 mm dia. GI Union
32mm dia ISI G.I. Pipe
32 mm dia. GI Ellbow
32 mm dia. GI coupling(Heavy)
25mm dia ISI G.I Bend
25mm dia ISI Gate valve
Adopter
Bore Kitty
Bore Cover End Cap
32mm dia ISI Gate valve
Supplying and fixing of 32A aerial fuse unit for 3 Nos fuse units (500v) on suitable TW concelled box with hylam sheet on the tapping pole with necessary clamps. SD132
Supply and run of 4 of 6 sq.mm PVC insulated (Heavy Duty) SC unsheathed Cu.conductor of 1100 V Grade on 7/20 GI bearer wire for service connection mains(SD68)
Supply and run of 4 of 6 sq.mm PVC insulated (Heavy Duty) SC unsheathed Cu.conductor of 1100 V Grade in 32mm GI Pipe suitably bent at both ends with necessary angle iron upright and end supports for mains(SD73)
Supply and fixing of TNEB meter board suitable for 32A Three phase service connection with 32A fuse unit (500V) 32Aneutral link and earth link (1"X1/8"copper flat) on TW plank of size 600mmX450mmX19mm with supporting TW reepers of 1" tk.on either side (S
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Supply and fixing of cudapah stone slab 40mm thicknees for cupboard arrangement including polishing etc., complete and as directed by departmental officers
Painting the new walls two coats over one coat of priming with best cement paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officers
Providing and planting of vembu, punkai, Poovarasu including all charges etc.,
Supply of Excel Merry Go Round 4 seat with dia of 5 feet and 4 feet height 88mm OD “B” Class pipe, Heavy duty, Taper Roller bearing and ball bearings are used for smooth rotation. Painting is executed by latest Technology of 7 tank process and electrostatic applied Pure polyester Powder coating(for outdoor) in attractive colours and no sharp edges
Supply of Excel Rainbow Ladder is provided with height at the centre above ground is 6ft,width of 12Ft. 1inch GI “B” Class pipes are used. Painting is executed by latest technology of 7 tank process and electrostatic applied Pure polyester Powder coating
Supply of Excel Double swing is rovided with 4no’s of 1 ½” GI support ‘B’ class pipes having the height above the ground level is 8 feet and they are connected with a top GI 2” ”B” class pipe length of 10 feet with 3way High Grade Cast Iron Elbow. Two seats are made up of High quality rubber(Flat rubber seat -1no,Flexi rubber seat 1no) and linked with rubber coated chain. Double ball bearings are used for smooth and noise free movement. Colouring is executed by latest Technology of 7 tank process and electrostatic applied Pure polyester Powder coating in attractive colours and no sharp edges. ISO & NSIC Certified company.
A P CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .