REPAIR/REPLACEMENT OF LT PANELS/CABLES ,STREET LIGHTS AND OTHER MISC AND ALLIED EXTERNAL ELECTRIFICATION ITEMS AT MO (MB) GHATKOPAR UNDER GE(NW) BHANDUP

Amount

Excavation in trenches n.exc 1.5 m wide and n. exc 1.5 m in depth and getting out in soft/loose soil for removing/laying of cables complete all as specified and as directed by Engineer-in-charge.

Returning, filling in including spreading , leveling , watering and well ramming in layers n.exc 25 cm with soil complete all as specified and as directed by the Engineer-in- Charge.

Removing excavated material to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge.

Material & Labour sand filling under floors or in foundation including watering & consolidation for cable cushioning all as specified and directed

Supply and laying HDPE pipes of pressure rating 6 kgf/cm2 (PE-63 grade) of size 32 mm bore laid in trenches for passing of cable complete all as specified and directed.

Supply and laying GI pipe 50 mm, light grade for the protection of the cable passing through road crossing, etc.

Supplying and laying unreinforced precast concrete cable cover class LV type 1, flat, size 250 x 150 x 40 mm complete all as specified and directed by the Engineer - in - charge.

Material and labour for straight through joint heat shrinkable type for underground LT cable 1100 volt complete all as specified and directed by Engineer in charge for size 10 Sqmm 4/2 core

All as per Item No 08 here-in-before for size 10/16 Sqmm 4/2 core

All as per Item No 08 here-in-before for size 25/35 Sqmm 3.5/4 core

All as per Item No 08 here-in-before for size 50 to 95 Sqmm 3.5 Core

All as per Item No 08 here-in-before for size 120 to 185 Sqmm 3.5 core

Supply and fixing, install, test and commissioning of LT Feeder pillar box outdoor type totally enclosed with front and rear opening hinged doors with canopy sloped top projected and raised platform of suitable sizes weather dust vermin proof made out of 2 mm thick stainless steel sheet, factory made powder coated as approved colour, aluminum bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 400 Amps rating capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lamp RYB , complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going cables as per required sizes, PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers etc., all as specified and directed for suitable to accomodate the following items including supply and fix following items and all as specified and directed by dismantling exisiting unserviceable LT panel complete with LT panel made by CPRI approved manufacturer Loc: Opp Tech Cell Incoming: MCCB 4 pole 250Amp with breaking capacity 36 KA adjustable type with exended terminals -01 NosOutgoing [a] MCCB 3 pole 125 Amps with breaking capacity 25KA adjustable type with extended terminals- 02No's Make: Legrand/Schneider/siemens [b] MCCB 3 pole 100 Amps with breaking capacity 25 KA adjustable type with extended terminals- 06 No's Legrand/Schneider/siemens (c) Changeovrer switch 250 Amp Legrand/Schneider/siemens

Supply and fixing, install, test and commissioning of LT Feeder pillar box outdoor type totally enclosed with front and rear opening hinged doors with canopy sloped top projected and raised platform of suitable sizes weather dust vermin proof made out of 2 mm thick stainless steel sheet, factory made powder coated as approved colour, aluminum bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 400 Amps rating capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lamp RYB , complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going cables as per required sizes, PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers etc., all as specified and directed for suitable to accomodate the following items including supply and fix following items and all as specified and directed by dismantling exisiting unserviceable LT panel complete with LT panel made by CPRI approved manufacturer Loc: Near SH-B-56//22 Incoming: MCCB 3 pole 250Amp with breaking capacity 36 KA adjustable type with exended terminals -01 Nos Make: Legrand/Schneider/siemens Outgoing [a] MCCB 3 pole 125 Amps with breaking capacity 25KA adjustable type with extended terminals- 02No's Make: Legrand/Schneider/siemens [b] MCCB 3 pole 100 Amps with breaking capacity 25 KA adjustable type with extended terminals- 05 No's Legrand/Schneider/siemens

Supply and fixing, install, test and commissioning of LT Feeder pillar box outdoor type totally enclosed with front and rear opening hinged doors with canopy sloped top projected and raised platform of suitable sizes weather dust vermin proof made out of 2 mm thick stainless steel sheet, factory made powder coated as approved colour, aluminum bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 400 Amps rating capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lamp RYB , complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going cables as per required sizes, PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers etc., all as specified and directed for suitable to accomodate the following items including supply and fix following items and all as specified and directed by dismantling exisiting unserviceable LT panel complete with LT panel made by CPRI approved manufacturer Loc: Near SPDC -04/SH-24,22/25 Incoming: MCCB 3 pole 250Amp with breaking capacity 36 KA adjustable type with exended terminals -01 Nos Make: Legrand/Schneider/siemens Outgoing [a] MCCB 3 pole 125 Amps with breaking capacity 25KA adjustable type with extended terminals- 02No's Make: Legrand/Schneider/siemens [b] MCCB 3 pole 100 Amps with breaking capacity 25 KA adjustable type with extended terminals- 04 No's Legrand/Schneider/siemens (c) MCCB 3 pole 40 Amp with breaking capacity 16 KA adjustable type with extended terminals-01 Nos Make: Legrand/Schneider/siemens

Supply and fixing, install, test and commissioning of LT Feeder pillar box outdoor type totally enclosed with front and rear opening hinged doors with canopy sloped top projected and raised platform of suitable sizes weather dust vermin proof made out of 2 mm thick stainless steel sheet, factory made powder coated as approved colour, aluminum bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 400 Amps rating capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lamp RYB , complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going cables as per required sizes, PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers etc., all as specified and directed for suitable to accomodate the following items including supply and fix following items and all as specified and directed by dismantling exisiting unserviceable LT panel complete with LT panel made by CPRI approved manufacturer Loc: opp heavy lift shed Incoming: MCCB 4 pole 250Amp with breaking capacity 36 KA adjustable type with exended terminals -01 Nos Make: Legrand/Schneider/siemens Outgoing [a] MCCB 3 pole 125 Amps with breaking capacity 25KA adjustable type with extended terminals- 02No's Make: Legrand/Schneider/siemens [b] MCCB 3 pole 100 Amps with breaking capacity 25 KA adjustable type with extended terminals- 04 No's Legrand/Schneider/siemens (c) MCCB 3 pole 63 Amp with breaking capacity 16 KA adjustable type with extended terminals-01 Nos Make: Legrand/Schneider/siemens

Supply and fixing, install, test and commissioning of LT Feeder pillar box outdoor type totally enclosed with front and rear opening hinged doors with canopy sloped top projected and raised platform of suitable sizes weather dust vermin proof made out of 2 mm thick stainless steel sheet, factory made powder coated as approved colour, aluminum bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 600 Amps rating capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lamp RYB , complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going cables as per required sizes, PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers etc., all as specified and directed for suitable to accomodate the following items including supply and fix following items and all as specified and directed by dismantling exisiting unserviceable LT panel complete with LT panel made by CPRI approved manufacturer Loc: ILMS Incoming: MCCB 4 pole 400 Amp with breaking capacity 50 KA adjustable type with exended terminals -01 Nos Make: Legrand/Schneider/siemens Outgoing [a] MCCB 3 pole 250Amp with breaking capacity 36 KA adjustable type with exended terminals -02 Nos Make: Legrand/Schneider/siemens [b] MCCB 3 pole 125 Amps with breaking capacity 25 KA adjustable type with extended terminals- 02 No's Legrand/Schneider/siemens (c] MCCB 3 pole 100 Amps with breaking capacity 25 KA adjustable type with extended terminals- 01 No's Legrand/Schneider/siemens

Supply and laying in repairs cable LT XLPE insulated and screened PVC bedded, galvanised steel strip armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade complete all as specified and directed by Engineer in charge for the following sizes including taking down existing u/s LT cable for 120 sqmm 3.5 core

All as per Item No 20 here-in-before but for 25 sqmm 3.5 core

Supply installation, testing and commissioning of FAST ELECTRODE maintenance free Chemical Earthing of Dual Pipe Technology, each of 3 Meter long with Outer Pipe Diameter of 88mm (galvanised for 80-120 micron and wall thickness 1.80mm) and Inner Pipe diameter 48mm (galvanised for 80-120 micron and wall thickness 2.60mm). There shall be terminal of size 75 x 5.20mm for connection with two holes of 14mm diameter. FAST ELECTRODE shall be duly filled with the highly conductive, Non Magnetic, Non Corrosive material and duly sealed at both ends with lead terminal of 75x5.2mm at top. The ELECTRODE shall be of 'make' having approval of CPRI (Central Power Research Institute), Govt of India for a minimum short circuit current of 42 KArms for 1 Second with initial pick of 88.2 KA. The FAST ELECTRODE Earth Enhancing Compound (minimum 25Kg) shall be pored on alround the electrode. The chemical compound to be used shall be as per the manufacturer's instructions of 'Electrode' and as also certified by any BIB (Bureau of Indian Standards) accredited laboratory. Make : Fast Electrode or equivalent as approved by the GE. Notes:- (i) The contractor shall procure the above materials either directly from the manufacturer(s) or their authorised dealers only and shall produce the original purchase vouchers alongwith original manufacturer's test certificates and other authenticated documents in compliance of the provisions as mentioned in the above item. Also all the requisite testing as specified above, in relevant IS and as directed by the GE shall be got done by the contractor. Cost of all the above elements shall be deemed to be included in the contractor's quoted rates. (ii) Any additional quantity of Earth Enhancing Compound in case required to obtain the desired results, the same also be provided by the contractor without any additional cost to the Govt. and quoted rates of above item shall be deemed to include the above element also.

Excavation for surface dressing in soft/loose soil not exceeding 15 cm deep and cleaning of area complete all as specified and directed.

M&L for river washed sand and screened dry for caushioning to UG cables in trenches below and around under ground cable for coushioning of cable in ducts including spreading and levelling complete.

Supply, Lay, Test & Commissioning cable LT XLPE insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of Size 25 Sqmm, 3.5 core complete all as specified.

Supply, Lay, Test & Commissioning cable LT XLPE insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of Size 120 Sqmm, 3.5 core complete all as specified.

Supply, Lay, Test & Commissioning cable LT XLPE insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of Size 150 Sqmm, 3.5 core complete all as specified.

Supply, Lay, Test & Commissioning cable LT XLPE insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of Size 400 Sqmm, 3.5 core complete all as specified.

Supplying and laying unreinforced precast concrete cable cover class LV type 1, flat, size 250 x 150 x 40 mm complete all as specified and directed by the Engineer - in - charge.

Material and labour for GI tubes "Medium Grade" 50 mm bore with and including all fittings laid in trenches/road crossing/floors etc for cable protection complete all as specified and directed.

Supply and fixing in repairs LED post top lanterns fitting made in cast aluminium spigot housing with decorative clear acrylic diffuser and IP65 protection 30/40 watt complete all as specified and directed. Make :Philips/Luckar/CG/Havells

Supply and fixing in repairs highly efficient high power multi LED flood fitting 100 watts with pressure die cast aluminium housing reflector and enclosed with toughened glass IP66 complete prewired and connecting with 0.5sqmm 3 core flexible wire including fixing arrangement on wall etc complete including dismantling of existing unserviceable flood light fittings complete all as specified and directed by Engineer in Charge. Make: Philips/Luckar/CG

Supply and fix in repairs highly efficient high power LED street light fitting 72W with pressure die cast aluminium housing reflector and enclosed with heat resistant toughened glass IP65 protection AC 240 Volts 50 HZ refractive lens with suitable electronic drive PF > 0.9 complete including taking exiting unserviceable street light fitting. Make:Philips/Luckar/CG

Supply and fix in repairs highly efficient high power 45 W LED street light fitting with pressure die cast aluminium housing reflector and enclosed with heat resistant toughened glass IP66 protection AC 240 Volts 50 HZ refractive lens with suitable electronic drive PF > 0.9 complete including taking exiting unserviceable street light fitting. Make: CG cat No. LSTO-45-CDL/ Halonix Cat part No HLSLD-09-45-CWL/ Surya Cat Part No SLEUL45WIP66LXN

Supply and fix in repairs pipe bracket made out of 40 mm dia GI pipe, medium grade, upto 1.5 mtr long, bent to shape and fixed on existing pole/ wall complete all as specified and directed. Note : Clamps nuts bolts etc will be measured and paid seprately under relevant items.

Supply and fixing in replacement pole mounting box FRP type of size 250mm x 175mm x 100 mm, 3 phase with locking arrangements including necessary nut, bolt and clamps of the flat iron of size 25mm x 4 mm comprising of MCB SP 6 Amps, 240 Volts, 10 KA, 'C' series and 3 phase connector 100Amp for incoming/outgoing cables with proper fixing arrangements on pole / wall complete all as specified and directed. Make: National/ Sintex

Supply and fixing in replacement pole mounting box FRP type of size 140mm x 140mm x 100 mm, 3 phase with locking arrangements including necessary nut, bolt and clamps of the flat iron of size 20mm x 3 mm comprising of MCB SP 6 Amps, 240 Volts, 10 KA, 'C' series and 3 phase connector 100Amp for incoming/outgoing cables with proper fixing arrangements on pole / wall complete all as specified and directed. Make: National/ Sintex

M & L in repairs for sub main wiring PVC copper cable 2.5 sqmm (02 Run & 01 Run of 1.5 sqmm) copper conductor 1100 Volt grade multi core multi stranded PVC insulated unsheated drawn through and including PVC conduit and accessories fixing on poles/ wall with clamps, nuts bolts etc from FRP box to street light fiting complete all as specified and direcetd

M&L for Preparation of old exposed surface of LT steel tubular poles of any type / size with bracktes clamps etc and painting with one coat of aluminium paint upto 6 mtr long and exposed surface of pole yellow and black paint in strips alternative 30 cm wide upto 1.5 mtr from ground level including marking of pole no's with paint all as specified.

M&L for preparation of old exposed concrete pole surface 6 mtr to 8 mtr long with one coat of cement base paint & painting to bottom of pole upto 1.5 mtr from ground level with black & yellow strips in paint alternatively including marking of pole Nos with paint complete all as specified and directed .

Dismantling exsting RCC & steel tubular poles with bracket & light and in lieu S&F 7 metre long hot dipped galvanised octagonal poles with top A/F 70mm bottom A/F 130 mm, made out of 3mm thick HT sheet alongwith base plate of size 220*220*12mm, including 1500mm long single arm bracket made out of 48mm dia, GI pipe, M20 in PCD 205mm, 700mm long and projected 100mm, "J" type EN8 grade set of 4 Nos foundation bolts alongwith templates, also including provision of the followings :- (a) MCB,SP,6A,230V, B series, 10KA mounted on and including 3mm thick plastic laminated sheet-01 No. (b) 4 way connector, bolt type having locking arrangement, weather proof and water proof control space : 01 No. Notes: (a) The rate quoted shall also be deemed to include the cost for provision of 50mm bore PVC pipe from cable trench to centre of the pole concrete of the pole concrete. (b) The earth work, RCC foundation reinforcement and form work will be measured and paid separately. (c) .quoted rate shall also be deemed to include for fixing of old light fitting retrived from dismantling. Make : BAJAJ Model BOP-7030 or its equivalent in Crompton/Philips / Wipro as approved by the GE.

M&L for mild steel TMT bars 6 mm to 8mm dia cut to length, bent to shape required, stirrups, spaces and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed

M&L for RCC type B-1, 1:2:4 (nominal mix) using 20 mm graded stone aggregate as in footing, columns, post, pillars, piers, wall of culverts, suspended slabs, edges and struts etc complete all as specified and directed

M&L for form work to sides of concrete footings, columns, posts, pillars, piers, edges and struts of rectangular or triangular shape for rough finished flat concretesurface complete all as specified and directed

Supply & fix in repairs LED post top lattern fitting 70 watts made out of cast aluminium spigot housing with decorative opal acrylic diffuser and IP65 protection complete. Make: Halonix HLPT-03-70-CW/ Baja Cat No. BGCL 70WLED / CG Cat Part No. LPTSA-70-T

Supply & fix of Street light control console made out of 2mm thick MH Sheet and paineted with powder coated paint suitable for and including the following items prewired complete, dimantling of existing unserviceable MCCB/MCB and reconnecting the UG cables in new control console by replacing cable glands and lugs all as specified and directed. a. Programmable electronic timer with one change over of capacity 16 Amps Make Indo-Asian cat no TDA 43110 - 1 No b. Three pole contactor 70 Amps, 415 Volt Model No MNX 70 - 1 No c. Surface mounted 16 Amps modular type 2 Way switch with box complete - 1 No d. MCCB 4 pole 100 Amps with breaking capacity 25 KA adjustable type with extended terminals - 1 No

Supply and fixing in repairs high bay LED light fittings with highly efficient LED baylight made of pressure die cast aluminium housing extraded aluminium heat sink & enclosed with toughended glass IP 66 of capacity 120W , power factor >0.9 5700K,having inbuilt surge protection device for overvoltage protection with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fitting, including fixing arrangement on truss with MS Clamps made out of 25x5mm flat iron with nuts, bolts etc complete painting with two coats synthetic enamel paint over a coat of red oxide complete dismantling existing unserviceable high bay fittings all as specified and directed. Make Philips/CG/Luckar Note:1.Contractor shall produce LM79 & LM80 test reports from OEM owned NABL accredited laboratory.Contractor shall also produce certificates for power factor and surge protection from the company at no extra cost.

M & L prepration of old exposed surface of garden light pole 1.5/ 2.5/5 meter long applying two coats of aluminium paint over a coat of anticorrosive paint including painting to bottom of pole complete all as specified and directed.

Servicing of complete solar battery 100AH 12V including cleaning the terminals and replacing unserviceable brass battery clamps and toping up of distilled water including cleaning of solar pannels on 5 mtr height pole/roof top - 29 Nos solar light fittings/pole complete all as specified and directed.

Radha Engineering Services

GRAND SERVICES

ORIENT ELECTRIC CO

DHARMESH ENTERPRISES