Providing Special repair works for the existing 1 No. of INS,2 Nos. of SI and 38 Nos. of PC/HC quarters at TENKASI in Tenkasi District

DI0021) Dismantling the damaged brick works of cement mortar in all floors without affecting the adjacent structures a) In Ground Floor

b) In First Floor

c) In Second Floor

d) In Third Floor

DI0012) Clean Removal of Cement plaster from walls without affecting the adjacent structures

DI0041.a) Dismantling the existing damaged RCC by manual / by using deploying machineries

DI0044) Dismantling the existing pressed tiles and weathering course without affecting the structure

FL0025) Weathering Course with concrete broken brick jelly 20mm gauge

FL0047) Finishing top of roof with one course of hydraulic pressed tiles of approved superior quality of size 23cmx23cmx20mm thick with water proofing compound

FL0028) Supply and laying superior variety concrete designer tiles for flooring in CM 1:3, 20mm thick with Admixture

FL0110) Supplying and laying of Ceramic tiles (anti skid) over Cement mortar 1:3, 20mm thick with Admixture

FL0049) Supplying and fixing of colour glazed tiles over cement plastering in Cement mortar 1:2, 10mm thick with Admixture

FL0117) Supplying and fixing of Vetrified tiles of best approved quality (Ivory) 600x600x8mm for flooring and other similar works with Admixture

FL0024) Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring

B0025) Brick Work in Cement Mortor 1:6 using kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) with admixture b) In First Floor

c) In Second Floor

d) In Third Floor

C0049) Precast cement concrete Jally ventilator using standardised concrete mix M20 without vibrating charges 50mm thick a) In Ground Floor

b) In First Floor

c) In Second Floor

B0053) Brick Partition wall in Cement Mortor 1:4, 110mm thick using kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) with admixture a) In Foundation and Basement

c) In First Floor

d) In Second Floor

e) In Third Floor

PL0003) Plastering with Cement mortar 1:5, 12mm tk with admixture

PL0013) Special ceiling plastering in Cement Mortar 1:3, 10mm thick with admixture

PA0001) White washing three coats using clean shell lime slaked

PA0018) Painting primer coat using approved quality of one coat of white cement for New walls

PA0019) Painting the walls with two coats using approved quality of best Oil Bound Distemper

PA0037A) Painting the New walls with two coats of approved best ready mixed exterior emulsion paint outer walls in addition to one coat of approved primer coat

SA0033) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

PA0042) Painting the old iron work with two coats of approved first class synthetic enamel ready mixed paint including scrapping and removing old paint from structural steel by manual labour

PA0043) Painting the old wood work with two coats of approved first class synthetic enamel ready mixed paint removing old paint from doors windows and works by manual labour

WS0006) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness a) 32mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

b) 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

WS0006.I) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D-1785 fully concealed in walls c) 20mm ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

J0017) Supplying and fixing of 4mm thick pin headed Glass panels

c) In First Floor

d) In Second Floor

e) In Third Floor

FW0004) Providing Form work and centering for reinforced cement concrete works b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

WS0002) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe

EL0004) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with surface run by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable (open wiring) a) Light point with ceiling rose

EL0047) Supplying and fixing of 4'18 watts crystal LED tube light and fixing the tube light fittings

EL0070) Supplying and fixing of 9 watts LED bulb

EL0401) Supply and fixing of 5 Amps 3 pin combined flush type wall socket including cost of materials and labour charges for fixing etc

EL0196) Run of main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0189) Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable (open wiring)

RE0004) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

GR0001) Supplying and fixing Mild Steel grills as per the design approved

EL0188) Run off the 2 wires of 1.5 sqmm copper PVC insulated single core cable with one run of 7/20GI stay wire (open wiring)

PA0004) White washing two coats using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding and scrapping the surface etc.

PA0021) Painting the old walls with two coats using approved quality of best Oil Bound Distemper over the existing wall surface including cost of distemper, cleaning and scrapping the walls & labour charges

PA0041) Painting the old walls with two coats of approved best ready mixed Exterior Emulsion paint without primer and including thorough scrapping

E0001) Earth work excavation for foundation in all soils (including refilling) a) 0 to 2 mt.

C0027) Plain cement concrete 1:5:10 for foundation and basement using 40mm gauge hard broken stone jelly

B0012) Brick Work in Cement mortar 1:5 using kiln burnt country bricks of size 8¾”x4¼"x2¾” (22x11x7 cm) with admixture in foundation and basement

C0030) Plain Cement Concrete 1:8:16 for foundation and other similar works using 20mm Gauge broken brick jelly

PL0006) Plastering with Cement mortar 1:4, 12mm thick with Admixture

FL0109) Plastering the top of flooring in Cement mortar 1:4, 20mm thick with admixture

CS0038) Supplying and fixing of precast cement concrete slab for cupboard/ ward robes, shelves, cover slab for chambers, baffle walls etc., and other similar works 40mm thick using standardised concrete mix M20 II. 40mm thick a) In Foundation and Basement

CS0039) Supplying and Fixing of fibre mixed precast slab of 50mm thick of all required shapes made in C.C 1:3:6

SA0048) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110 mm dia UPVC Non Pressure pipe

b) 160 mm dia UPVC Non Pressure pipe

JD0073) Providing and fixing factory made unplasticized polyvinyl chloride (UPVC) Door Frame with shutter

C0029) Plain cement concrete 1:2:4 for foundation and basement and other similar works using 20mm gauge HBSJ with Admixture

C0068.a) Chipping and removal of unsounded area of the existing damaged ceiling area column and beam Projection and roughening the surface including labour charges and clearing away the debris materials away from the site

PA0038.a) Supplying and applying of rust remover to the corroded rod surface by using of steel wire brush including labour charges, scaffolding and all charges

PA0038.b) Supplying and applying a coating of concresive nitoprime zincerin fosroc 1 llit / 1890 (or) equivalent shall be applied over the reinforcement

PA0038.c) Providing micro concrete by using 10mm aggregate with polymer materials with necessary support jacking

FL0112) Pointing the Pressed Tile over the roof with cement mortar 1:3

FL0112.a) Painting two coats of brush bond roof guard coating and one coat of roof guard primer, pointing the pressed tiles jointing with SBR latex