Development works for the work of Construction of New Building for Model Fire and Rescue Services Station at Coimbatore in Coimbatore District. (Re tender)

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

1.6 : Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

1.8 : Earth work excavation for in SDR for Open foundation (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1 : Filling with Excavated Earth

41 : Painting - New "iron work"

53.3 :C.I steps (5 kg )

73.1: Supply & Fixing of 6 way three phase distribution board

78 : Earthing Station IS3043 (Type I)

ANNEXURE-I 2.1.3 : Filling sand (using crushed stone sand)

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

6.2.1 : Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") (using crushed stone sand)

8.1.1.1 : Standardised concrete Mix M20 Grade Concrete (using crushed stone sand) a) In Foundation and basement

f) In fourth Floor

9.2.1 : Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3")(using crushed stone sand) e. In fourth floor

10.2.1 : Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm tk (B.P.)(using crushed stone sand) a. In Foundation and basement

f. In fourth floor

18.1 : Formwork using M.S.Sheet b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) Mixed with Super Plasticiser

31.2.1 : Finshing the top of Terrace floor with one course of solar reflective Ceramic tiles without base concrete (using crushed stone sand)

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) Mixed with Super Plasriciser

35.1.1 : Plastering 1:3, 12mm tk with WPC (using crushed stone sand)

38.6 : One coat white cement for new walls and other similar works.

38.7 : Plastic Emulsion PAINT including primer for outer walls

43.1 : Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

50.2.1 : Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150mm (using crushed stone sand)

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

71.2.1 : Supplying and fixing of 63 AMPS Triple pole main switch.

ANNEXURE-II: A1: Run of 4 Wires of 6 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

A2: Drilling of 150mm dia deep borewell in hard rock including drilling of 180mm pilot bore well

A3: Supply and fixing of 160mm dia PVC end cap

A4: Supply and fixing of 20" x 5" foam sheet board with vinyl cutting letters

A5: Supply, delivery and fixing of 150mm OD of PVC casing pipe of 6kg/cm.Sq

A6: Supply and delivery of clear water vertical wet type 5HP submersible bore well pump set (Duty 50 lpm x 175m)

A7: Supply and delivery of 3 HP Open well Submersible pump set (Duty 100 lpm x 50 m)

A8: Supply and fixing of MS fabricated DOL 5 HP panel Board for submersible pumpset with approved quality

A9: Supply and fixing of panel control board for 3HP open well submersible motor with two level

A10: Labour charges for the erection of submersible pumpset in borewell / openwell upto 5 HP

A11: Supply and fixing of 150mm dia MS bore well clamp set

A12) Supplying and fixing of 32mm dia adopter for connecting submerssible pumpset with UPVC pipe

A13: Supply and delivery 3 core of 4 sqmm Flat type copper cable

A14: Supply and fixing of 32mm dia UPVC pipe

A15: Supplying and fixing of following dia GI pipe 'B' class with ISI in below ground level a) 32mm dia GI pipe

A16: Supplying and fixing of following dia GI pipe 'B' class with ISI in above ground level a) 80mm dia GI pipe

b) 50mm dia GI pipe

A17: Supplying and fixing of following dia GI/GM specials a) 80mm dia Elbow

b) 80mm dia Hex Nipple

c) 80mm dia union

d) 50mm x 32mm dia reducer

e) 50mm dia Elbow

f) 50mm dia Hex Nipple

g) 50mm dia union

h) 50mm dia bend

i) 50mm Dia Tee

j) 50mm dia coupling

k) 80mm dia Gun Metal Non return valve

l) 50mm dia Gun Metal Non return valve

m) 80mm dia Gun Metal Gate valve

n) 50mm dia Gun Metal Gate valve

o) 32mm dia Gun Metal Gate valve

A18: Supplying and laying of following dia PVC Pipe( 10kg for .per.cm2) in Below ground level a) 63mm dia pvc pipe

b) 50mm dia pvc pipe

A19: Supplying and delivery of PVC specials a) 63mm dia Elbow

b) 63mm dia Tee

c)50mm dia Tee

d) 50mm dia Elbow

e) 63mm x50mm dia reducer

f) 50mmx40mm dia reducer

A20: Supplying, delivering and fixing of 16mm thick Nylon Rope for bore well

A21: Supplying and fixing of Aluminium die casting letters including all cost of materials and labour charges. a) TNPHC emblem (2')

b) 9" dia letters

A22: Supply and fixing of TNEB meter board suitable for 3 phase 63A service connection

A23: Supplying of 3.5 x 70 Sq.mm PVC armoured LTUG Cable below ground level

A24: Supply and fixing of cable gland suitable for 3.5 x 70 sq mm PVC armored LTUG cable etc.

A25: Supply & Fixing of crimping Lugs suitable for 3.5 x 70 sq mm UG cable

A26: Supply and fixing of Horizontal type 4 way triple pole neutral

A27: Supply and fixing of 8 way SP DB of 16 A / way with 32 A DP switch with metal clad switch

A28: 100A Capacity Panel Board

A29: Supplying and fixing of 2'x2' 36W LED square / round surface panel light

A30: Supplying and fixing of 12"x12" 15W LED square / round surface light

A31: Supply and installation of AIR-CONDITIONER with copper coil of 2.0 TR Split Type AC Unit

A32: Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay

A33: Supply and laying of 5/8" and 3/8" copper pipe (Extrabeyond 3 metres supplied with AC unit)

A34: Supply and fixing of MS stand for fixing outdoor unit

A35: Supply and fixing of Matrix make eternity Pe6sp Model & Digital phone system confiquaration 8/3/27 trunk - 8lines & digtal operator port

A36: Supply and fixing of Matrix make Eon 510 digital key operator phone multi function

A37: Supply and fixing of cli 62sx calller id phone

A38: supply and fixing of DB box main of Pbx input all cable

A39: supply and laying of Finolex 2 pair cable (0.5mm) Intercom point end to end

A40: Supply and laying of Dlink cat 6 Lan cable end to end

A41: Supply and fixing of Net Work 6 u Model With Tray

A42: Supply and erection of IO box for RJ11 & RJ45

A43: Supply and fixing of D-link 10/100 Desktop swich with hi-speed 24 port switch

A44: Supply and fixing of Finolex 20 pair telephone cable & accesseries

A45: Fixing of Installation of Lan intergeration charges of WAN/LAN

A46: Supply, Erection and Commissioning of 1No of Passengers lift (13 Persons - 884 Kgs.) with internal connections

SRP CONSTRUCTION COMPANY