REPAIR REPLACEMENT OF JOINERY AND CERTAIN B/R WORKS IN TYPE I TYPE II AND TYPE III QUARTERS OF DRDO AND DGQA POOL AT RAKSHA VIHAR COLONY UNDER GE I R AND D KANPUR

Amount

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) n. exc 1.50 sqm in each complete all as specified & directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.50 sqm but n exc 4 sqm in each complete all as specified & directed.

Taking down shutter of any description, exc 1.0 sq.m but n.exc 2.00 sqm each complete all as specified & directed.

M&L for mild steel work as in door chowkhat of angle iron including necessary cutting and welding conforming to Fe 410-0 or E-250, complete all as specified and directed

S&F Second class hard wood Palin, solid, straight as in chowk at and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 30mm thick Flush shutters, factory made soild core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

M&L 35mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.

S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed by Engr-in-charge.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed by Engineer-In-Charge.

S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification.

S&F 100mm size stainless steel butt hinges medium weight cold rolled incl welding if required.

S&F 125mm long extruded aluminium alloy handle complte all as specified.

S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised complte all as specified.

S&F 75mm long Anodised Aluminium tower bolt all as specified

S&F 150mm long Anodised Aluminium tower bolt all as specified

S&F 200mm long Aluminium anodised,barrel tower bolts of extruded section and fixed complte all as specified.

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair butt hinges medium weight cold rolled mild steel 100mm long fixing with srews or weld to steel/PVC/wooden frame work complete all as specified and directed.

S&F in repair 150mm long Extruded aluminium alloy handles, fabricated type, anodised complte all as specified.

S&F in repair 200mm long Aluminium anodised,barrel tower bolts of extruded section and fixed complte all as specified.

S&F in repair 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F hasp & staple, aluminium 100mm size complete all as specified and directed.

M&L mild steel work as in holdfasts, knee piece and similar small article confiraming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F factory made mild steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F factory made mild steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

M&L Providing, cement concrete type B0, 1:2:4 (12.5mm graded stone aggregate) as in coping, holdfast area etc complete all as specified and as directed.

S&F for framed work such as grills with ends of bars shouldered and/or riveted or forged into spikes,MS flats, framed guard bars & similar work etc complete conforming to Fe 290 Gde-E-165.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F Sheet glass ordinary quality & glazing with oil putty in square n-exc. 0.5 sqm in each pane 3mm thick Complete all as specified & directed.

S&F 3mm thick figured glass pinheaded type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples upto height of 2nd floor complete all as specified and directed .

M&L for Preparation of new wood surface of any description over 10 CM width or girth and applying two caots of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified.

M&L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement, including taking down old cement plaster complete all as specified & directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces of wall in cement mortar (1:4) mixed with water proofing compound @ 2% by weight of cement by using scaffolding upto the 15m height surface finished even and smooth without using extra cement, upto height of 2nd floor roof slab,including taking down old cement plaster complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of ceiling surfaces of roof ,chazza,beam etc in cement mortar (1:4) including finishing the surface even and smooth for and upto 2nd floor roof slab ceiling, including taking down old cement plaster complete all as specified & directed .

M&L for preparation of new palstered surface of ceiling and applying three coats of white wash on newly plastered surface of ceiling, including preparation complete all as specified and directed.

M&L Dubbing out average 10mm thick on irregular face of walls/ ceiling (when specifically ordered in writing) complete all s specified and as directed.

M&L applying two coats of oil bound distemper on walls surface over a coat of primer (as per manufacturer instructions) on wall surfaces including necessary preparation of wall surfaces complete all as specified and directed.

M&L applying two coats of cement base paint on walls surface over a coat of primer (as per manufacturer instructions) on wall surfaces including necessary preparation of wall surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300x450x7mm thick set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match shade of tiles in vertical surface over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Cuttings out old existings hinges any type frm exisings steel windows/ ventilators and providings new box type steel hinges to fix the old windows/ventilators and making good complete all as specified and as directed.

M&L 63mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incl all fittings (i.e. Bend/ TEE/ fixing ring etc as required) and joint made with cement sand mortar if required incl taking down existing pipe of any description complete all as specified and directed by Engr-in-charge.

Taking down cement plaster from RCC Chhajja, roof projection, fins and facia and other similar RCC items and M&L for 10mm thick rendering in cement mortar 1:3 finishing the surface even and smooth without using extra cement over 15 mm thick dubbing coat in cement mortar 1:3 complete including use and waste of nesessary form work and scaffolding work for repair upto 3rd floor roof if required complete all as specified and directed.

Demolition of reinfocement cement concrete cut as required to facilitate and paving not exc.15 cm thickness ( above roof upto 3rd floor roof) for old RCC Tank Capacity N. exc1500 Ltr and finished the surface with rendering in CM 1:3 and disposal of u/s material within 100m lead as per direction complete all as specified & directed.

S&F rotational moulded polyethylene water storage white tanks triple layered (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover GI nipple of required size complete all as specified and directed.

M&L for 100 mm thick PCC 1:3:6, Type C-2, using 40 mm graded stone aggregate as in floors/paving/platform etc, finishing cement concrete surface even and smooth with using extra cement complete all as specified and directed.

Taking up or down 15mm bore GI pipe and connections laid on roof, wall, ceiling etc. with due care including cleaning properly, for refixing or removal fromsite complete all as specified and directed.

Taking up or down 20mm bore GI pipe and connections laid on roof, wall, ceiling etc. with due care including cleaning properly, for refixing or removal fromsite complete all as specified and directed.

S&F 15 mm bore GI pipe medium grade ISI marked with all fittings and fixed to walls/roofs or laid in floors complete all as specified and directed.

S&F 20 mm bore GI pipe medium grade ISI marked with all fittings and fixed to walls/roofs or laid in floors complete all as specified and directed.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples upto height of 2nd floor complete as same type as existing all as specified and directed.

M/S UNIQUE ENTERPRISES (BID ID -3354669)

khurana builder (BID ID -3363252)

M/s. PREM PRAKASH & SONS (BID ID -3354591)

Lalta Prasad vijay kumar Forwarding Agency (BID ID -3362764)