CWEK-19/2020-21

Amount

SCHEDULE A PART I (B/R WORKS)

Dismantling of wrought iron or mild steel work of any description not otherwise specially provided complete all as specified.

Dismantling of brick work or stone masonary, precast cement concrete walling built in cement mortar including all quoins, arches, pillars etc., complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified.

Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and as directed.

Material and labour for brick work with subclass ‘B` old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified and as directed.

Taking down cement plaster of any description, thickness and in any position including raking out joints, hacking for key, scrubbing down with water etc , and removal the rubbish/ demolished material outside defence land, complete all as specified and as directed.

Material and labour for taking down plastering on lathing (other than wire netting ) without removing lathing in cement lime or cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and as directed.

Material and labour for flush pointing to random rubble masonry uncoursed or brought upto coursed, in cement mortar 1:3 complete all as specified and as directed.

Material and labour for extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses (Hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40mm) Lime or Sand stone complete all as specified and as directed.

Material and labour for 10mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and Labour for 15mm thick rendering in two layers on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with WPC @2% by weight of cement or as per manufacturer’s instructions, finished even and fair, complete all as specified and as directed. (Note : WPC shall be measured and paid separately)

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller, over a coat of alkali primer, complete all as specified and as directed.

Material and labour for two coat of cement base paint over a coat of alkaline resistant primer on newly plastered surface including preparation of surface of wall complete all as specified and as directed.

Material and labour for providing cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Material and Labour extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds , mitred /stopped ends etc., complete all as specified and as directed.

Material and Labour for two coats of cement base paint to old plastered wall surfaces including preparation of surfaces complete, all as specified and as directed.

Taking down chowkats or frames with shutter area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish , complete all as specified and as directed.

Taking down chowkats or frames with shutter area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete, all as specified and as directed.

Supply and fixing for 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, complete all as specified and as directed .

Supply and fixing IInd class (hollock) factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and as directed.

Supplying and Fixing for factory made 35mm thick, 2nd class HW, plain framed, panelled shutters (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated, complete, all as specified and as directed.

Supply and fixing IInd class (hollock) factory made 30mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(b) of SSR 2009 (Part I), complete all as specified and as directed.

Supply and fixing framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; angle iron chowkats for door ,barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-290-Gde E-165 complete all as specified and as directed .

Supply and fixing in repair, mild steel helical door spring 200 mm long fixed with screws to wooden chowkhats or welding to steel chowkhats, complete all as specified and as directed.

Supply and fixing for ISI Marked 150 mm long, aluminium handle, cast type, anodized, complete, all as specified and as directed.

Supply and fixing for ISI Marked 100 mm long, aluminium handle, cast type, anodized, complete, all as specified and as directed.

Supply and fixing for butt hinge ,ISI Marked ,100mm size, medium weight, cold rolled mild steel complete, all as specified and as directed.

Supply and fixing for butt hinge ,ISI Marked ,75mm size, medium weight, cold rolled mild steel complete, all as specified and as directed.

Supply and fixing steel rolling shutters 1.25 mm thick laths, with or without ball bearing including top cover, anchouring rod, hasp and staple, gear operated type with bevel gear box and crank handle type including one shop coat of primer and erected in position as directed complete all as specified and directed.

Supply and fixing ball bearing for rolling shutters complete all as specified and as directed.

Material and Labour for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish/ demolished material outside defence land, complete all as specified and as directed .

Material and labour for premium quality, glazed coloured ceramic tiles 300 x 450 x 7mm thick on vertical surfaces of walls including 10mm thick rough finished plaster in cement mortar (1:3) set jointed in neat cement slurry and pointed in coloured cement to match complete, all as specified and as directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles (Square/rectangular) , area of each tiles exceeding 0.11 sqm and not exceeding 0.18 sqm and 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface over and including cement screed bed 10mm thick in cement mortar (1:4) , complete all as specified and as directed.

Material and labour for premium quality, joint free non skid coloured ceramic tiles, of same description and length as of floor tile but 100 mm height on vertical surfaces of walls including 10mm thick rough finished plaster in cement mortar (1:3) set jointed in neat cement slurry and pointed in coloured cement to match ,complete all as specified and as directed.

Material and labour for premium quality, glazed coloured ceramic tiles 200 x 300 x 7mm thick on vertical surfaces of walls including 10mm thick rough finished plaster in cement mortar (1:3) set jointed in neat cement slurry and pointed in coloured cement to match complete, all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors , aprons etc. laid, bedded and pointed in any mortar, complete all as specified and as directed..

Material and labour for 18mm thick granite (of any type) work (table rubbed and polished and moulding) in platforms, steps, jambs, pillar, counter WHB, floor over and including 20mm thick in cement mortar (1:3) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite, complete all as specified and as directed.

Material and labour for machine cut kota stone slab 18-20 mm thick (of size not less than (55 cm x 55 cm) laid in flooring and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting waste, rubbing and polishing (Granite finish) over and including cement screed bed 20mm thick in cement mortar (1:3) base , complete all as specified and as directed.

Material and labour for machine cut kota stone slab 16-18 mm thick laid on vertical surface and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) but as on vertical surface, riser, pillar, skirting, etc. over and including 10mm thick plaster in cement mortar (1:3) on brick work or concrete surfaces complete, all as specified and as directed.

Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and as directed .

Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removal to store complete all as specified and as directed.

Supplying and fxing for ISI Marked, 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors, complete, all as specified and as directed.

Supplying and fixing for ISI Marked, 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors, complete, all as specified and as directed.

Dismantling plain or corrugated mild steel sheeting any gauge, thickness, including Nanital or similar pattern roof covering, complete all as specified.

Supplying and fixing (in repair), bib tap screwed down high pressure, cast copper alloy,fancy type, chromium plated, ISI marked, with capstan heads, screwed down suitable for 15mm bore pipe or union, complete all as specified and as directed by the Engineer-in-Charge. (Make : ESSCO Cat No-DLX-511 or equivalent model in makes mentioned in Appendix 'B' of tender document ) Note- Contractor will submit to Engineer-in-Charge a guarantee certificate from manufacturer before claiming payment.

Supply and fixing ( in repair), wall mixer, chromium plated, fancy type with capstan head handle, screwed down high pressure with lettered hot and cold including CP brass flange and necessary extension nipple screwed for 15 mm dia pipe complete, all as specified and as directed. Note- Contractor will submit to Engineer-in-Charge a guarantee certificate from manufacturer before claiming payment.

Supply and fixing Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6mm dia . GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40X3mm size 60mm long complete, all as specified and as directed. Make- Armstrong or equivalent model in makes mentioned in Appendix 'B' of tender document.

Material and labour for 6mm thick (5 ply) plywood, grade BWR, type BB, fixed with nails to timber frame work in ceiling, complete all as specified and as directed.

Material and labour for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces, fixed with screws to timber frame work on ceiling, complete all as specified and as directed .

Material and labour for Second class hardwood plain fillets, square, rectangular or triangular in section of area exceeding 13 Sq. cm and not exceeding 25 Sq. cm, clean sawn, secured with nails, complete all as specified and as directed.

Demolition of cement concrete (reinforced) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas, and similar suspended work and removing rubbish/ demolished material outside defence land, complete all as specified and as directed .

Material and labour for providing reinforced cement concrete 1:11/2:3 type A1 (using 20mm graded mechanically crushed stone aggregate) in slabs supported on walls, beams and columns in floors, roof, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed.

Material and Labour for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete, all as specified and as directed.

Material and labour mild steel TMT bars, 6mm dia and over , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as in stirrups, spacer, binders, etc complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slab, floor slab and similar work not exceeding 200mm thick for fair finished surfaces of concrete flat complete all as specified and directed..

Form work to edges of RCC roof slab, floor slab and similar work exceeding 100mm but not exceeding 200mm thick for rough finished surfaces of concrete flat complete all as specified and directed..

Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness (below or above ground level) and removal the rubbish/ demolished material outside defence land, complete all as specified and as directed.

Material and labour for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as levelling course, finished even and fair to receive floor finishes, complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate), 50mm thick, as in plinth protection/PCC path and paving, laid in panels of area not exceeding 2.00 sqm with 6mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/PCC Path and paving and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparing new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint on steel surfaces over a coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation, shafts, man holes etc not exceeding 10 Square metre on plan and getting out in soft/loose soil complete all as specified and as directed.

Material and labour for plain cement concrete 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate), as in foundation filling and mass concrete, complete all as specified and directed.

Supply and fixing roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (web, tee, angle, channel or flat sections) including distance pieces, cleats etc fixed in position,conforming to Fe-410(Gde 250), complete all as specified and as directed .

Supplying & Fixing for Pre-painted galvalume aluminuim zinc coating GI based corrugated steel sheet 0.50mm thick, conforming to IS-15961 of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and as directed . Note- The sheets shall have (150 gm/sqm total on both sides) with super durable polyester quality paint of approved colour, suitable for exterior application conforming to IS-15965.

Supplying & Fixing for Pre-painted galvalume aluminuim zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and as directed . Note- The sheets shall have (150 gm/sqm total on both sides) with super durable polyester quality paint of approved colour, suitable for exterior application conforming to IS-15965.

Material and labour for taking down plastering on lathing (over than wire netting ) without removing lathing in cement lime or cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and as directed.

Supply and fixing expanded metal, cut to length, bent to required shape and tying, including annealed mild steel wire not less than 0.9mm dia, fixing with galvanised steel staples to wood or steel members, weight not exc 4 kg per square meter complete all as specified and directed.

Supply and fixing for sheet glass 3mm thick, ordinary quality , in square not exceeding 0.5 sqm in each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters complete, all as specified and as directed.

Supply and fixing galvanized iron wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm mesh size fixed with tinned tacks or galvanized wire staple and including fixing with beads supplied with joinery when fixed in panels of joinery, complete all as specified and directed.

Supply and fixing for aluminum anodized barrel tower bolt of extruded section 200mm long, ISI marked, complete all as specified and directed.

Supply and fixing aluminum anodized, barrel tower bolt of extruded section 100mm long, ISI marked, complete all as specified and as directed.

Supply and fixing 300 mm aluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and as directed.

Supply and fixing, ISI Marked 100 mm long, aluminium handle, cast type, anodized, complete, all as specified and as directed.

Material and labour for for 12mm thick medium density fibre board, exterior grade, fixed to GI framework with screws complete all as specified and as directed .

Dismantling timber scantling 40 Sq. cm and over in section, in any position of unframed/ framed work complete, all as specified and as directed .

Material and labour for 2nd class hardwood clean sawn in scantlings, in any position in framed/unframed work, complete all as specified and directed

Material and labour for 100mm thick PCC 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate) as in sub base to floor, complete all as specified and as directed.

Material and labour for 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate) as in sub base to floor, complete all as specified and as directed.

Material and labour for broken stone hard core of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and Labour for vibratory compacted, precast cement concrete, coloured (other than grey), rubber moulded , interlocking designer paver blocks( double glossy) in any and shape, confirming to IS-15658-2006 of 60mm thickness, M-35 grade in path, hard standing, etc. laid over and including 50 mm thick bedding layer of sand complete, all as specified and as directed.

Material and Labour for cutting openings through walls for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for underpinning including providing, fixing and removing, shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises, in old masonry walls built in cement mortar complete all as specified and as directed.

Material and Labour for forming jambs, etc., to openings (to foregoing item), with stone supplied by MES including cutting, toothings and properly bonding into old work, including facing and pointing (if necessary) to match existing work, new work built in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge

SCHEDULE A PART II (INTERNAL ELECTRIFICATION)

Taking down carefully any type point wiring (light, fan, socket or power) complete with fittings such as switches ceiling roses, pendants, regulators, sockets tube light fitting with all accessories etc. removal of materials from site and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces complete, all as specified and as directed.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable flame retardant low smoke (FRLS), 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable flame retardant low smoke (FRLS), 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover extended up to 25 mm over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately .

Description all as per Srl item No.2.02 here in before but for socket outlet point 5 Amp on same board.

Description all as per Srl item No.2.02 here in before but for socket outlet point 5 Amp on Independent board complete, all as specified and as directed.

All as per the description of Serial Item No 2.02 above, but with 2.50 Sq mm un-sheathed multistranded cable for one socket outlet 15 Amps independent including continuous copper earth wire, PVC insulated of 2.50 Sq mm size complete, all as specified and as directed . (Switch, Socket shall be measured and paid separately)

All as per the description of Serial Item No 2.02 above, but with 4.00 Sq mm un-sheathed multistranded cable for one socket outlet 15 Amps independent including continuous copper earth wire, PVC insulated of 4.00 Sq mm size complete, all as specified and as directed . (Switch, Socket shall be measured and paid separately)

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable flame retardant low smoke (FRLS), 1100 volt grade with multi stranded copper conductor drawn through and including medium grade , ISI marked PVC casing caping not less than 32 mm width , 10 mm depth with accessories, on wall/ceiling surface and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable flame retardant low smoke (FRLS), 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including GI sunken boxes 1.2mm thick of any module from 2 module upto 18 module conforming to IS-5139(part-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including modular cover plates with frame i.e. inner and outer plate for sunken box for housing the modular switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan/bell point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately .

Description all as per Srl item No.2.07 here in before but for socket outlet point 5 Amp on same board.

Description all as per Srl item No. 2.07 here in before but for socket outlet point 5 Amp on Independent board complete, all as specified and as directed.

All as per the description of Serial Item No 2.07 above, but with 2.50 Sq mm un-sheathed multistranded cable for one socket outlet 15 Amps independent including continuous copper earth wire, PVC insulated of 2.50 Sq mm size complete, all as specified and as directed . (Switch, Socket shall be measured and paid separately)

Supply and fixing 3 module, white inner and outer plate with frame including GI flush box 3 module, complete all as specified and as directed .

Supply and fixing 4 module, white inner and outer plate with frame including GI flush box 3 module, complete all as specified and as directed .

Supply and fixing 6 module, white inner and outer plate with frame including GI flush box 3 module, complete all as specified and as directed .

Supply and fixing switch piano 5/6 Amps, flush button type, single pole, one way, 240 volt , AC supply, ISI Marked, complete all as specified and as directed.

Supply and fixing switch piano 15/16 Amps, flush button type one way 240 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and as directed.

Supply and fixing socket outlet 5 pin 5/6 amps, 240 volt. flush type, AC supply, ISI Marked, complete all as specified and as directed.

Supply and fixing socket outlet 2 in 1, 6 pin 6 /16 Amp and multi pin flush universal shuttered type, 240 volt, AC supply, ISI Marked, complete all as specified and as directed.

Supply and fixing modular switches 6 Amps, one way one module, 230 volt , AC supply, ISI Marked, complete all as specified and as directed.

Supply and fixing modular sockets 6 Amps 2/3 pin combined, one way, 230volts, 2 module, ISI Marked complete all as specified and as directed.

Supply and fixing modular switches 16 Amps, one way 230 Volts, one module, 50 Hz , AC supply, ISI Marked, complete all as specified and as directed.

Supply and fixing modular sockets 6/16 Amps 2 in 1, 6 pin, one way 230 volts, 2 module, complete all as specified and as directed.

Supplying and fixing the ceiling rose, three terminal ISI marked surface backlit, complete all as specified and as directed.

Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, ISI Marked, complete all as specified and as directed.

Supplying and fixing in replacement, LED bulk head light fitting 1x10 watt with lamp holder(1x10W) ABS housing, IP65 and connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of light complete, all as specified and directed by Engr-in-charge. Make: Bajaj Cat Part No. BIBWP 10WLED or equivalent model in makes mentioned for Group 2 in Appendix 'B' of tender document .

Supply and fixing in replacement, recess mounted LED luminaire with complete diffuser 36W , flat panel ultra slim powder coated CRCA housing , 240 volt, 50HZ, AC supply , complete with all accessories internally pre wired including connecting with 3 core copper conductor flexible cable of size 23/0.0076 , all as complete all as specified and as directed.

Supplying and fixing in replacement, pin type LED 10 watt with B-22 base and connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete, all as specified and as directed.

Supply and fixing in replacement indoor decorative 20 watt LED tube light luminarie, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver , AC 220-240 Volts, 50Hz including lamp ( Lamp type LED tube light 1x 20 Watt) and connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete, all as specified and as directed. Make: Havells Cat Part No. ENDURALINEARNEOBS20WLED865SPCWH or equivalent model in makes mentioned in Appendix 'B' of tender document .

Supply and fixing MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, C curve, 6 to 32 Amps, ISI marked, complete all as specified and as directed.

Supply and fixing MCB single pole neutral , 240 volts, 50Hz , breaking capacity 10KA, C curve, 40 Amps, ISI marked complete all as specified and as directed.

Supply and fixing MCB three pole neutral , 415 volts, 50Hz , breaking capacity 10KA, C curve, 63 Amps, ISI marked complete all as specified and as directed.

Supply and fixing distribution board for MCB's Load line TPN, 8 ways, double door, 415 volts, with and including 400 amps rated bus bar, vertical type, IP 43 protection powder coated, MCB in incomer and out going with suitable size of MS cabinet 2mm thick and making all type of connections with suitable size of gland for incomer cable complete , concealed on the wall surface, making good the disturbed portion with adjoining surfaces to match with existing finish and taking down the existing DB's and MCB's any type complete all as specified and as directed .

Supply , insatallation, testing of SPN distibution board 04 way,double door , IP 43 , as per IS 8623 including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles, concealed on the wall surface including taking down the existing DB's any type and description and making good the disturbed portion with adjoining surfaces to match with existing finish, complete, all as specified and as directed.

Excavating in trenches, not exceeding 1.50 metre wide and not exceeding 1.50m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 sq.m on plan and not exceeding 1.50m in depth and getting out in soft/loose soil, complete all as specified and as directed .

Returning filling in including spreding leveling watering and well ramming in layers not exc 25 cm each in soft/loose soil, complete all as specified and as directed .

Removing excavated materials to a distance not exc 50 m and depositing where directed at level n exc 1.5 above the starting points, complete all as specified and as directed .

Material and Labour for Fine and dry sand cushioning for underground cable by providing a layers of sand 8cm deep before laying and 15cm deep after laying the cable including tretching the cable, complete all as specified and as directed . Note - Punned thickness of sand layer shall be measured and paid to contractor.

Material and labour for sub class brick laid dry width wise across the cable in trenches for protection of cable complete all as specified.

Supply and laying in trenches XLPE insulated , screened, PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 Volts grade with stranded aluminium conductor of size 25 Sq mm 3.5 core, complete, all as specified and as directed.

Supplying and fixing light grade GI tubing of size 40 mm dia for cable protection and fixed with clamp to pole and wall with nut bolt complete, all as specified and as directed.

Taking out old earthing complete and taking out old unserviceable earthing material and provision of new earthing complete with galvanised earth plate electrode 600mm x 600mmx 6mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 4.00 mm wire earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire protected by galvanized steel pipe 15mm dia (light grade) and connected to main switch or main control board all as shown in electrical plate No.3 of SSR Part-I & including necessary excavation and earth work. The rate also include charcoal & salt in alternate layers, 20mm dia GI pipe (light grade) for watering, protection pipe, funnel, wire mesh, RCC cover etc. complete, all as specified or indicated including testing on completion. Note : The rates for earth work in any type of soil, returning filling and removal, GI protection pipe, funnel, wire wesh, RCC cover, etc shall be deemed to be including in quoted rates. RCC cover shall be 50mm thick in 1:2:4 type B-1 using 8mm bars @10cm c/c both way.

Material and labour for sub main wiring with two single core flame retardant low smoke (FRLS) , PVC insulated unsheathed copper conductor cable 4.00 sqmm drawn through and including medium grade , ISI marked PVC casing caping not less than 32 mm width , 10 mm depth with accessories fixed on wall/ceiling surface with one additional PVC insulated , stranded copper conductor flame retardant low smoke (FRLS) of 2.5 sqmm,green colour for earth continuity conductor including taking down old unserviceable sub main wiring complete, all as specified and directed. Note- 2 run of 4.00 sqmm and 1 run of 2.50 sqmm cable with casing caping shall be measured as 1 unit.

Material and labour for sub main wiring with two single core flame retardant low smoke (FRLS) , PVC insulated unsheathed copper conductor cable 6.00 sqmm drawn through and including medium grade , ISI marked PVC casing caping not less than 32 mm width , 10 mm depth with accessories fixed on wall/ceiling surface with one additional PVC insulated , stranded copper conductor flame retardant low smoke (FRLS) of 6.0 sqmm,green colour for earth continuity conductor including taking down old unserviceable sub main wiring complete, all as specified and directed. Note- 3 run of 6.00 sqmm cable with casing caping shall be measured as 1 unit.

Note:- Amount of credit of Rs. 299790.00 for retrieved materials as mentioned in Schedule of Credit Page No 34. of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/S Tajamul Ah Buchh

M/S SUHEEL CONSTRUCTIONS