Comb.pkg for Work A(GEC)- Const. of 220kV LILO line to 220kV Athani S/s from the exstg 2nd ckt of 220kV Mahalingapura-Kudachi DC line for 25.535km & const.of 02 Nos.220kV TBs at 220kV Athani S/s & Work B-Const. of 110kV SC line from exstg 110kV Ghatanatti S/s to exstg 110kV Haliyal S/s for 7.435km and Const. of 1No. of 110kV TB each at 110kV Ghatanatti & 110kV Haliyal S/s and Prov.110kV Mtring equip/matrls in Athani Tk, Belagavi Dt on TK basis

Station TB portion

220kV TERMINAL BAY - SUPPLY PORTION:

CIRCUIT BREAKER :

i) SF-6 circuit breakers with rigid bi-metallic terminal connectors suitable for Al.tube/Drake ACSR with spring/semi pneumatic/pneumatic type ope...

ii) 145kV, 3150A, 40 kA Class suitable for Moose/Drake ACSR for 110kV Line

a) 220 kV, 1250 A, 40 kA for three seconds short time current rating, Electrically cum manually operated double break type disconnects with solid core insulators, terminal connector suitab...

2) Upright mounting type without Earth switch LPH 8250 mm.

3)Upright mounting type without Earth switch LPH 5750 mm.

4)Underhung mounting type without earth switch

Note:Terminal connectors for Isolators :

Rigid type suitable for Drake ACSR- 48 Nos

Flexible type suitable for 63mm Al.pipe -12Nos

b) Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators complete set.

A) 110KV, 1250A,40KA Clas...

2) Upright mounting type without Earth switch LPH 4600 mm.

Note :Terminal connectors for Isolators shall be as follows :

Rigid type suitable for Moose ACSR- 9Nos

Flexible type suitable for 63mm Al.pi...

CURRENT TRANSFORMER :

Oil filled Current Transformer 0.2s class with rigid bimetallic terminal connectors suitable for Al. tube/Drake ACSR with marshalling Kisok etc., complete as per technical specif...

Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose/Drake ACSR conductor complete as per technical speci...

Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR conductor complete as per technical specificati...

CAPACITOR VOLTAGE TRANSFORMER :

245 kV CVT, 4400 PF, 1 Ph CVT with with 3 secondaries, terminal connector suitable for Al. tube/Drake ACSR with marshalling box etc., complete as per technical specifi...

VOLTAGE TRANSFORMERS : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR with marshalling box KISOK etc.,complete as per technial specifications:...

Tamper Proof Metering Box for IPP/EHT Installation for 3Phase 4Wire 2NOs of ETV meters(Outdoor type)

KPTCL approved make 1 amp CT operated static EHT 3 Phase 4 Wire and 0.2s accuracy class with ABT, TOD facility , DLMS ICS complaint and RS 485 port MODBUS protocol ETV meter for traiff

SURGE ARRESTOR : (Procelain/Polymer) metal oxide with surge counter with terminal connectors suitable for Al. tube/Drake ACSR as per technical specifications.

i) 198 kV, 10 KA,Class- III,SM,Metal Oxid...

ii) 96 kV, 10 KA, Class- III,SM,Metal Oxide type type suitable for Moose/Drake ACSR for overhead Lines

i) Control and Relay Panel compatible to IEC 61850,communication protocol for Sub-station Automation System complete as per technical specification:

220 kV Line panel Type 2L( as per Annexure RPP1-SAS...

ii) Control and Relay panel complete : Simplex type Control and Relay panel complete as per technical specifications

For 110 kV Transmission line

1) All the C&R Panels and associated panels shal...

Total Weight of fabricated out of galvanised (Mild Steel) Station structures & Mounting Structures,Lighting Mast & Street Lighting Structure (excluding Bolts & Nuts) as per technical specifications

Total Weight of galvanised Bolts & Nuts of Station structures & Mounting Structures,Lighting Mast & Street Lighting Structure as per technical specifications

BUS BAR FORMATION as per technical specifications:

1) Drake ACSR 220kV side

Rigid bus with taps & clamps:

i) Aluminium Tube conforming to 6340 WP of IS-5082 /1969 (BS 1600-Sch.40) of following sizes -220 kV side

b) 63 mm size for connecting isolator to vertical tap

ii) Inverted 'V' taps made of 63 mm Aluminium Tube (BS - 1600) of 2500mm vertical height for vertical portion and cross bus on 220 kV Side with rounded off End.

iii) Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 110KV side with rounded off end.

iii) End Cap suitable for Aluminium pipe of size, 63mm on 220kV Side

iv) Post insulator clamps suitable for 75 mm Aluminium pipe and post insulator Solid core type -220 kV side

b) Expansion type

c) Sliding Type

v) Post insulator clamps suitable for 63 mm Aluminium tube & Post insulator solid core type - 110kV side

vi) Corona Bell suitable for Aluminium pipe 75mm on 220kVside

vii) End cap Suitable for Aluminium tube of size 63mm on 110kV

Post Insulators-Cylindrical Solid Core Insulators as per IS : 5350, Part-II & III & as per technical specification:

1. Post Insulators of Rigid Bus for 220kV side -2 units/stack

2. Post insulator Solid core Insulator 110 kV, 1 Unit/stack

2.Single Tension string of 11kV,120 KN Disc Insulators suitable for Drake ACSR:

220 kV side - Single Tension string of 16 units each- 12 strings

3.Single Suspension string of 11kV,90 KN,Disc Insulator suitable for Drake (220kV line)/Moose ACSR (110kV line)

a) 220kV side- Single Suspension string of 14 units each-6strings

b) 110kV side- Single ...

INSULATOR HARDWARE & CLAMPS as per technical specification:

1. Bolted type Single Tension clamp with hardware suitable for DRAKE ACSR 120KN,20mm -220 kV side

2. Bolted type Single Suspension clamp with hardware suitable for Drake ACSR 90KN,16mm -220 kV side

3.C type Wedge connectors:

a) C type Wedge connectors(T-Type) suitable for Drake to Drake ACSR - 220 kV side

b) C Type wedge connector suitable for Moose - Panther (Line)-Ghatanatti TB

c) C Type wedge connector suitable for Drake - Panther (Line)-Haliyal TB

AC Distribution box (out door ):

a) AC distribution Box double front (out door) 24 terminal ,2 I/C of 100A MCCB 20kA + 24 O/G MCB 16A + 2 O/G of 100A, HRC fuse, complete as per technical specificatio...

b) AC Distribution Box Single front (Outdoor type) 6 Terminal, one I/C of 100A MCCB 20kA + 6 O/G MCB 16A + 1 O/G of 100A, HRC fuse, complete as per technical specification.

LT Power Cable:

a) 1.1 kV class PVC insulated aluminium power cable (AC supply for motors/lighting etc,.) 3.5 Core x 70 Sq mm with glands/lugs/ferrules

PVC insulated Copper Control Cable with glands/Lugs /Ferrules.

1.1 KV class,Size of cable:

i) 19 Core 2.5 Sq.mm

ii) 10 Core 2.5 Sq.mm

iii) 4 Core 6.0 Sq.mm

iv) 4 Core 2.5 Sq.mm (Qty of SS65 is added)

v) 4 Core 4 Sq.mm

vi) 1P X 1.5 Sq mm,Copper PVC instrumentation cable armoured (screened cable)

vii) 2 Core 6 Sq.mm (Qty of SS71 is added)

viii) 2 Core 2.5 Sq.mm

ix) 4 Core, 25 Sq mm (Power Cable)

PLCC equipments:

1. Wave Trap (suspension type) 0.5mH, 2000A,dual band (Suspension type) 50 to 100KHz & 100 to 500kHz

2. Carrier cabinet- Single channel (PLCC Terminals)

3. Coupling device (LMU+LMDU)

4. Protection couplers -4 command version

5. Coaxial cable 75 Ohms

Equipments required for establishing SCADA Communication as per KPTCL Specification

i) Multi Functional Transducer (MFT) 0.2S class including labour

ii) Opto Coupler (220 or 110V DC) including labour

iii) Supply of Power cables for SCADA

a) Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core

a) i) Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 7 Core

c) Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core

d) Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core

Miscellaneous items:

1. Rubber mats 2000mm X 1000mm X 12mm size suitable for 15KV class

2. Equipments name plates & earthing name plates including fixing at outdoor yard.

Station Yard Lighting (Out Door)

(To be designed, assessed & quoted by the bidder)

Supply and installation/Fixing/Provision of Outdoortype Thermoplastic Modular Panel enclosure with transparent Polyca...

Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly...

Station TB Erection incuding Testing and Commissioning

220kV & 110kV TERMINAL BAY - ERECTION PORTION INCLUDING TESTING & COMMISSIONING :

CIRCUIT BREAKER :

i) SF-6 circuit breakers with rigid bi-metallic terminal connectors suitable for Al. tube/Drake ACS...

ii) 145kV, 3150A, 40 kA Class suitable for Moose/Drake ACSR for 110kV Line

a) 220 kV, 1250 A, 40 kA for three seconds short time current rating, Electrically cum manually operated double break type disconnects with solid core insulators, terminal connector suitab...

4)Underhung mounting type without earth switch

Note:Terminal connectors for Isolators :

Rigid type suitable for Drake ACSR- 48 Nos

Flexible type suitable for 63mm Al.pipe -12Nos

b) Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators complete set.

A) 110KV, 1250A,40KA Clas...

CURRENT TRANSFORMER :

Oil filled Current Transformer 0.2s class with rigid bimetallic terminal connectors suitable for Al. tube/Drake ACSR with marshalling Kisok etc., complete as per technical specif...

Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose/Drake ACSR conductor complete as per technical speci...

Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR conductor complete as per technical specificati...

CAPACITOR VOLTAGE TRANSFORMER :

245 kV CVT, 4400 PF, 1 Ph CVT with with 3 secondaries, terminal connector suitable for Al. tube/Drake ACSR with marshalling box etc., complete as per technical specifi...

VOLTAGE TRANSFORMERS : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR with marshalling box KISOK etc.,complete as per technial specifications:...

SURGE ARRESTOR : (Procelain/Polymer) metal oxide with surge counter with terminal connectors suitable for Al. tube/Drake ACSR as per technical specifications.

i) 198 kV, 10 KA,Class- III,SM,Metal Oxid...

ii) 96 kV, 10 KA, Class- III,SM,Metal Oxide type type suitable for Moose/Drake ACSR for overhead Lines

Control and Relay Panel compatible to IEC 61850,communication protocol for Sub-station Automation System complete as per technical specification:

i) 220 kV Line panel Type 2L( as per Annexure RPP1-SAS...

ii. 220/110 kV Power Transformer C&R panels with BCUs including integration with existing bus bar scheme

ii. Ethernet switch (61850 compatible) with 16FO+8CU

1)The Accuracy class of metering co...

ii) Control and Relay panel complete : Simplex type Control and Relay panel complete as per technical specifications

For 110 kV Transmission line

1) All the C&R Panels and associated panels shal...

Total Weight of Station structures and Mounting Structures,Lighting Mast & Street Lighting Structure including Bolts & nuts for 220kV TB portion

Total Weight of Station structures and Mounting Structures,Lighting Mast & Street Lighting Structure including Bolts & nuts for 110kV TB portion

BUS BAR FORMATION :

Note: The scope also includes installing insulator strings complete with necessary Hardwares and stringing of the conductor / Earth wire etc as per technical specifications

Rigid bus with taps & clamps:

Aluminium Tube conforming to 6340 WP of IS-5082 /1969 (BS 1600-Sch.40) of following sizes -220 kV side

a) 75 mm size -180mtrs

b) 63 mm size for connecting isolator to ver...

Post Insulators-Cylindrical Solid Core Insulators as per IS : 5350, Part-II & III & as per technical specification:

1. Post Insulators of Rigid Bus for 220kV side -2 units/stack

2. Post insulator Solid core Insulator 110 kV, 1 Unit/stack

AC Distribution box (out door ):

a) AC distribution Box double front (out door) 24 terminal ,2 I/C of 100A MCCB 20kA + 24 O/G MCB 16A + 2 O/G of 100A, HRC fuse, complete as per technical specificatio...

b) AC Distribution Box Single front (Outdoor type) 6 Terminal, one I/C of 100A MCCB 20kA + 6 O/G MCB 16A +1 O/G of 100A, HRC fuse, complete as per technical specification.

LT Power Cable:

1.1 kV class PVC insulated aluminium power cable (AC supply for motors/lighting etc,.) 3.5 Core x 70 Sq mm with glands/lugs/ferrules

Laying of PVC insulated Copper Control Cables with glands/Lugs /Ferrules of 1.1kV Class (Qty of SE32 is added)

(Refer Techno Commercial sheets for split up details)

PLCC equipments:

1. Wave Trap (suspension type) 0.5mH, 2000A,dual band (Suspension type) 50 to 100KHz & 100 to 500kHz

2. Coupling device (LMU+LMDU)

3. Coaxial cable 75 Ohms

Equipments required for establishing SCADA Communication as per KPTCL Specification

i) Multi Functional Transducer (MFT) 0.2S class including labour

ii) Opto Coupler (220 or 110V DC) including labour

Laying of Power cables for SCADA

(Refer Techno Commercial sheets for split up details)

Earth Mat formation :

i. Supplying and laying MS Flat 75 x 12 mm flat welding and applying ACB paint to welded portion as per the drawing/standard specification and consolidation (all other materials ...

ii.Supplying and Grounding of Equipment with G.I.Flat 72 x 12mm and connecting Equipment to the earth mat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling ...

Supplying and Grounding of equipments with GI flat 50 x 6 mm and connecting equipments to the earth mat/ground pit including all connected works with all materials supplied by the contractor. Each ...

iii. Supplying and Providing 25mm dia M.S.Rod 1.05m long earthman spikes including heating, bending top 50mm overlap flattening and making spike edge at one end driving into the earth below the ground...

iv. Supplying and providing Cast iron pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2 part clamp out of G.I.Flat 50x6 mm as per specification and supplying and fixing of RCC collar of size 450...

v. Erection portion of Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2 part clamp out of G.I.Flat 50x6 mm continuously welded around the pipe using...

vi. Providing deep bore earthing:

Sinking bore of 150mm clear dia using fast rig including fixing of 40mm dia MS rod, including jointing the pipes as per KPTCL standards & providing sodium bentonite ...

b) 40mm dia MS rod(5 mtr long-20 no)

c) Bentonite clay

d) Cost of GI flat for joining two rods by welding to obtain continuous length

e) Releasing & re-erection of existing 96 kV Lightning arrester of existing 110kV Haliyal line bay in order to make space for erecetion of MCT & MPT

Dismantling of existing 110kV LA mounting structure in order to make space for erecetion of MCT & MPT-3Nos=0.2784MT

Line Supply portion

Line Supply Portion:

Total weight of the Towers (High Tensile Steel) excluding Bolt & Nuts as per technical specifications

(Refer Techno Commercial sheets for split up details)

Total weight of the Towers (Mild Steel) excluding Bolt & Nuts incl. Gantry) as per technical specifications

(Refer Techno Commercial sheets for split up details)

Total weight of the Bolts and Nuts as per technical specifications

(Refer Techno Commercial sheets for split up details)

Tower Accessories:

a) Number Plates (1 No. per tower)

b) Danger Board/Caution Plates (1 No. per tower)

c) Circuit Plates (1 No. per circuit) (110kV-32Nos )

d) Phase Plates (Set of 6 Nos.) (110kV- 16Nos)

e) Phase Plates (Set of 3 Nos.)

f) Earth Bonds300mm long

g) Earth Bonds 450mm long

h) Supplying of Grounding of tower including cost of 40mm dia, 2.5mm thick, class 'C' GI pipe of 3mtrs length as per specifications with 50x6 GI flats 3 mtrs long, salt, charcoal.

Conductors as per technical specifications:

iii. Panther ACSR

iv. Ground wire- 7/3.15mm

I. Insulators strings suitable for DRAKE ACSR CONDUCTOR as per technical specifications :

i. 220kV,120kN,Single Tension insulator strings consisting of any one of the following:

a. Insulator string...

ii.220kV,120kN,Single Suspension insulator strings consisting of any one of the following:

a. Insulator string consisting of 1X14nos. of 90kN Disc insulators

b. Porcelain long rod insulator string ...

II. Insulators strings suitable for LYNX ACSR CONDUCTOR as per technical specifications :

i.110kV,90kN,Single Tension insulator strings consisting of any one of the following:

a. Insulator string c...

ii .110kV,90kN,Single Suspension insulator strings consisting of any one of the following:

a. Insulator string consisting of 1X7nos. of 90kN Disc insulators

b. Porcelain long rod insulator string e...

III. Insulator Hardwares for DRAKE ACSR CONDUCTOR as per technical specifications:

i. Compression type Single Tension clamp (excluding Insulators) with hardwares & arcing horns suitable for 1X16 uni...

ii. Compression type Double Tension clamp (excluding Insulators) with hardwares & arcing horns suitable for 2X16 units of 120kN insulators to suit DRAKE ACSR conductor

iii. Compression type Single Suspension clamp (excluding Insulators) with hardwares & arcing horns suitable for 1X14 units of 90kN insulators to suit DRAKE ACSR conductor

iv. Compression type Double Suspension clamp (excluding Insulators) with hardwares & arcing horns suitable for 2X14 units of 90kN insulators to suit DRAKE ACSR conductor

IV. Insulator Hardwares for LYNX ACSR CONDUCTOR as per technical specifications:

i. Compression type Single Tension clamp (excluding Insulators) with hardwares & arcing horns suitable for 1X8 units ...

ii. Compression type Double Tension clamp (excluding Insulators) with hardwares & arcing horns suitable for 2X8 units of 90kN insulators to suit LYNX ACSR conductor

iii. Compression type Single Suspension (excluding Insulators) with hardwares & arcing horns suitable for 1X7units of 90kN insulators to suit LYNX ACSR conductor

Accessories for Conductors as per technical specifications:

a) Mid Span Compression Joints

b) Repair sleeves

d) Vibration dampers

a) Mid Span Compression Joints

b) Pre formed armour rods

c) Repair sleeves

e) Vibration dampers

C. Accessories for Earthwire:

a) Mid Span Compression Joints

b) Repair sleeves

d) Single Tension clamps (bolted type)

e) Single Suspension clamps (bolted type)

OPGW Cable and its Tower accessories

A.OPGW Cable & its accessories :

a) 48Fibre (DWSM) OPGW fibre optic cable for 220kV line (inclusive of conductor offline stringing)

b) Suspension clamp assembly for 48 fibre OPGW

c) Tension fitting Assembly for 48fibre OPGW including all accessories for joint box(splicing location)

d) Tension Assembly for dead end for 48fibre OPGW

e) Tension Assembly -Double Tension pass through for 48fibre OPGW

f) Vibration dampers for 48fibre OPGW

g) Down lead clamp assembly for 48fibre OPGW

h) Joint box for 48fibre OPGW

FODP 48 F: Indoor type consisting of 2nos of rack mounted LIU (to be housed in FODP) with 24 ports each with FCPC coupling & pigtails

C. Fibre Optic approach Cable:

48 fibre(DWSM)-including installation hardware set for 48 fibre approach cable

Civil Station TB Works

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...

Removal, stacking and respreading of existing jelly as per the directions of the engineer in charge of the work including all costs labour, loading, unloading, transportation etc., complete and any ot...

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...

Civil Line works

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Line Erection Portion

LINE ERECTION PORTION

i. Check Survey using their own equipment as per specification for 220kV line

(Conducting detailed check survey along the approved route duly following the route alignment, GPS C...

ii.Check Survey using their own equipment as per specification for 110kV line

(Conducting detailed check survey along the approved route duly following the route alignment, GPS Co-ordinates, submissi...

Installing insulator strings complete with necessary Hardwares, Installing and stringing of conductor including fixing of conductor accessories, etc.,(including all the conductors in each phase of ...

iii. Panther ACSR

iv. Ground wire- 7/3.15mm

i) Installation, testing & Commissioning of 48F OPGW cable along with associated hardware fittings as per technical pecification for OFFLINE condition

ii) Joint Box for 48 Fibre OPGW

iii. FODP 48F:

Indoor type consisting of 2nos of rack mounted LIU (to be housed in FODP) with 24 ports each with FCPC coupling & pigtails

iv. Fibre Optic Approach cable :

48 fibre(DWSM)-including installation hardware set for 48 fibre approach cable

Assembling and Erection of 220kV Towers (including tower accessories etc., except GI angle, Barbed wire & Grounding materials

1) The Bidders are required to quote the rates taking in to co...

Assembling and Erection of 110kV Towers (including tower accessories etc., except GI angle, Barbed wire & Grounding materials

1) The Bidders are required to quote the rates taking in to c...

Tower Accessories:

a) Supplying and fixing GI angle iron 450X450x50 mm 1Mtr length with cleats, bolts nuts as per specification and fixing above 0.5mts length each at inner and outer surface of tower ...

b) Supplying and fixing of Barbed wire as per the specification.

3) Grounding of tower including cost of 40mm dia, 2.5mm thick, class 'C' GI pipe of 3mtrs length as per specifications with 50x6 GI flats 3 mtrs long, salt, charcoal including excavation charges.

I. Restringing of existing Drake/Lynx conductors/Ground wires:

a) Restringing of existing Drake conductors from tower no. 66 to 69 for a distance of 1.435kms at the LILO end in the existing 220kV DC ...

b) Restringing of Lynx ACSR conductor of existing 110kV Satti line for providing MC tower to accommodate existing 110kV Satti line, Ghatnatti line and proposed 110kV Haliyal line(630 mts*3)

c) Restringing of Ground wires of 110kV Satti line for providing MC tower to accommodate existing 110kV Satti line, Ghatnatti line and proposed 110kV Haliyal line

II. Releasing of existing Drake, Lynx Conductor & Ground wire

i. Releasing of existing Drake conductor from tower no. 66 to 69 for a distance of 1.435kms at the LILO end in the existing 220kV DC line=...

ii. Releasing of existing Lynx conductor :

a) 110kV Athani-Haliyal LIS SC line & 110kV Athani- Krishna Sugars IPP SC line from T. no 3 to T. no. 15 =18.9kms

b) 110kV Satti line for providing MC towe...

iii. Releasing of existing earth wire :

a) 110kV Athani-Haliyal LIS SC line & 110kV Athani- Krishna Sugars IPP SC line from T no 3 to T. no. 15 = 3.15kms

b) 110kV Satti line for providing MC tower to...

Dismantling of existing 220kV & 110kV Towers :

Dismantling of existing type tower parts without stubs including loading and unloading from site to store

a) 220kV Tower - 1No. (Tower 220kV, DA+3 - 1No...

b) 110kV Towers -14Nos (Work A) :

(i. 110kV DA type towers: DA+0:-4 Nos & DA+3:-2Nos=6Nos

ii. 110kV DB type towers:- DB+0:-2 Nos, DB+3:-3Nos & DB+6:-1No.= 6Nos

iii. 110kV DC type towers:- DC+3:- 1No....