CA NO. GE (AF)/SGR-75/2024-25 REPAIR/ REPLACEMENT TO FALSE CELLING, STEEL GATE, SHED AND OTHER MISC WORK AT OMQ UNDER GE (AF) SRINAGAR.

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.

All as per Ser item No 2.00 here in before but except Sheets.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Preparing new zinc (or galvanised) surfaces to receive painting of any description over 10cm width or girth, by coating with mordant solution including washing and cleaning, etc. steel and iron surfaces and applying two coats of synthetic enamel paint in camouflaging CCD pattern as approved, complete all as specified and directed.

M&L for tightening bolts and closing bolt holes, etc. to rectify the leakage / seepage, in old roof of corrugated steel sheets by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts if required, all set in stiff white lead, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for structural steel work as in truss, rafter purling, made out of angle / Hollow pipe / tube section including jointing cleats, plates flat iron, gusset plates, rails, braces etc. conforming to Fe 410-W (gde-E-250) Quality, confirming to IS-1161-1979 of grade St-240 complete all as specified and as directed.

M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings conforming to Fe-290- W (Gde?E165) quality B (exclusive or steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, complete all as specified and directed.

S&F in repairs 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc., complete all as specified and directed.

Dismantling of timber scantlings 40 sqcm and over in section, in any position unframed work, complete all as specified and directed.

M&L for second class hardwood in scantlings frame work, wrought, complete all as specified and directed.

S&F in repairs 20mm dia decorative powder coated drapry curtain rods of with bright finish, including decorative side domes, brackets and a minimum of 8 Nos curtain rings in per running metre of length, complete all as specified and directed.

Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed.

Preparation of old steel surface and iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint , complete all as specified and directed.

S&F for in repairs 20m thick wooden planks of second class hard wood, planed one side and edges tongued and grooved or rebated fixed, repairs to replace old and or decayed boarding in patches including cutting out old, piecing, heading joints, complete all as specified and directed.

S&F 30mm width of flaps continuous (piano) hinges, stainless steel, bright finish or electro galvanised, complete all as specified and directed.

S&F 40mm dia brass polished cup board knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed.

S&F 100mm size mortice lock with two levers (vertical type) brass body, complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nails in existing wooden slab, complete all as spercifed and directed.

M&L for wooden laminted flooring in strips of size 120cm long and 20cm wide and 6-8 mm thick, fixed with PVC sheet and cushion, complete all as per manufucterer's instructions and directed.

M&L for 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancig white lamination, fixed with screws to timber frame work, complete all as specified and directed.

S&F 100mm size stainless steel handle, fancy type, complete all as specified and directed.

S&F 60mm stainless steel hinge, fancy type, self closing Italian patter suitable for cabinet and shelves opening / closing operation, complete all as specified and directed.

M&L for 3/4mm thick PVC edge lipping fixed with nails for 18/19 mm thick prelaminated partical board & shutters etc., complete all as specified and directed.

S&F of Magnet of suitable size fixed for cabin leafs, drawers etc., complete all as specified and directed.

S&F stainless steel telescopic channels roller of size 25mm x 12mm, 450mm lenth (when close) with male female rolling brackets suitable for baskets, complete all as specified and directed.

S&F Stainless steel 304 grade perforated cutlery basket of size 520mm width, 485mm depth and 100mm height, complete all as specified and directed.

S&F Stainless steel 304 grade Cup & Saucer basket of size 520mm width, 485mm depth and 100mm height, complete all as specified and directed.

S&F Stainless steel 304 grade designer Pull out detergent basket of size 100mm width, 485mm depth and 430mm height, complete all as specified and directed.

S&F Stainless steel 304 grade designer plain basket of size 520mm width, 485mm depth and 150mm height, complete all as specified and directed.

S&F Stainless steel 304 grade designer pull out basket of size 810mm width, 485mm depth and 200mm height, complete all as specified and directed.

S&F Stainless steel 304 grade designer Gas removal mesh of size 200mm width and 100mm height, complete all as specified and directed.

M&L for second class hardwood plain fillets, square in section, clean sawn, secured with screws exc 13 Sqcm but n exc 25 Sqcm, complete all as specified and as directed.

M&L for french polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and directed.

S&F 15mm thick 1st class softwood Australian wooden panelling fixed with toughened and grouted as wall panelling including fillets/cornices & 9 mm ply fixing on walls and including two coat varnishing, polishing and preparation with sneezing including taking down existing electrical fittings and refixing the same, complete all as specified and directed.

S&F 12mm thick Plywood, grade BWR, type BB fixed with screws to timber frame work with beading as required, complete all as specified and directed.

Preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 45 mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, complete all as specified and directed.

S&F 12mm thick gypsum board in ceiling fixed with screw of size 600x600mm as per manufacturers instructions including necessary jointing and taping and applying 1mm thick putty to receive finishes, complete all as specified and directed.

S&F in repairs 6mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber /GI / aluminium framework with screws to ceiling flat or sloping, complete all as specified and directed.

Preparation of new or previously untreated plaster/ AC sheet / Gypsum board surfaces of ceiling including cornices and applying two coats of oil bound distemper colour / tint, complete all as specified and directed.

S&F in repairs for 15mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.

S&F in repairs for 20mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.

Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n exc 10cm girth. complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm Ball brass valves, high pressure, with polythene float and flynut including dismantling water tanks and removing from site, complete all as specified and directed.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm Ball brass valves, high pressure, with polythene float and flynut including dismantling water tanks and removing from site, complete all as specified and directed.

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes of cpacity exc 250 litres but n exc 500 litres, complete all as specified and directed.

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes of cpacity exc 500 litres but n exc 1000 litres, complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. Complete all as specified and directed.

M&L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, Complete all as specified and directed.

S&F 15mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F 20mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repairs 15mm bore Stop valve / angle valve, cast copper alloy, chromium plated, fancy type, screwed down high pressure with capstan head, complete all as specified and directed.

S&F in repairs 15mm bore bib tap, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finishing even and smooth without using extra cement, complete all as specified and directed.

Preparation of newly plastered wall surfaces by using necessary filling compound of Altek/Birla white 1mm thick wall care putty to obtain smooth / even surface using sand paper and applying two coats of oil bound dismater over a coat of primer, complete all as specified and directed.

Preparation of old plastered surfaces of walls and applying two coats of oil bound distemper upto 03 storey height, complete all as specified and directed.

Preparation of old plastered surfaces of walls and applying one coat of oil bound distemper upto 03 storey height, complete all as specified and directed.

Preparation of old wood and wood based surfaces of any description exc 10cm with or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 Sqm and credited to the contractor, complete all as specified and directed Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface.

Taking down shutters of any description size of shutter exc 1 Sqm but n.exc 2 Sqm and removing from site complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening, complete all as specified and directed.

S&F 30mm thick Factory made Solid Panel PVC Door Shutter (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F 100mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed..

S&F 150mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150mm size Aluminium handles, cast type, anodised, complete all as specified and directed.

S&F in repairs Vitreous china squatting pan, Orissa pattern, size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete, complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe , PVC cover sheet in same colour etc., complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and directed.

S&F in repairs 15mm size WHB / sink / Wall mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc., complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) soil waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls, including all fitting ,complete all as specified and directed

S&F in repairs 75mm dia PVC (SWR) soil waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls, including all fitting ,complete all as specified and directed

S&F in repairs 15mm size PVC connections with PTMT nuts of length 600mm, complete all as specified and directed.

Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for, Complete all as specified and directed.

M&L for Reinforced cement concrete, 1:1.5:3, Type A-1 (using 20 mm graded crushed stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for MS TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15cm thick (below or above ground level), complete all as specified and directed.

M&L for plain cement concrete, 1:4:8, Type D-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc., complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for Light shade Vitrified Ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for Vitrified tiles, coloured, size 600 x 600 x 9mm thick as on vertical surfaces, such as skirting/dado set and jointed in neat cement slurry and pointed in coloured cement to match colour of tiles over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for Glazed ceramic tile 300x600x06-7mm thick (coloured) on vertical surfaces such as wall, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for 25mm thick plain cement concrete, 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub base of floor finish even and rough to receive further floor finishes (tile/kota stone/ marble ), complete all as specified and directed.

Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismantling / taking down items) worth Rs 1,75,650.00 during AOC. (Note :- Tenderers shall not quote for this Schedule)

M/S LATIF AHMED MIR (BID ID -3252481)

M/S A.R TANTRAY (BID ID -3254958)

M/S SA INFRATECH (BID ID -3255096)

M/S GULZAR ENTERPRISES (BID ID -3250114)

M/S M.R. Construction (BID ID -3253318)

M/S TARIQ AHMAD RATHER (BID ID -3253837)

M/S ZAHOOR ENTERPRISES (BID ID -3253282)

M/S WANI AND SONS (BID ID -3253952)

M/S LUCKY BUILDERS (BID ID -3254903)

M/S Abdul Ahad Rather (BID ID -3254857)