Repair/Maintenance to various regulatory gates on Main Ranbir Canal falling under the jurisdiction of MISD-1 Jammu

Repair/Maintenance to various regulatory gates on Main Ranbir Canal falling under the jurisdiction of MISD-1 Jammu.

Annual repair/maintenance of the below mentioned gates by way of repair to winch machines, providing/fitting of bearings as per sample, nuts and bolts, complete painting of the winch machines and gate leaves by scrubbing/removal of the old rust and then applying red oxide paint and anti corrosive enamel paints .Application of grease to the worm and pinion set of gears and on all sliding surfaces. Also replacement of rusted nuts/bolts as per requirement. Refitting of the winch machines and other parts at site and checking for smooth operation of the gates. a) Gate at Distributory Chowki Escape 27000 (5’X6’)-1no. b)Gate at RD 27000 silt ejectors (3’x6’)-3nos c) Gate at Distributory 3D (2’X8’) -1no. d) Gate at Distributory 3E (1’-6”X3’-6’’) -1no. e) ) Gate at Distributory 5B Barnai (2’X4”) -1no. f) Gate at Distributory 4C machine Domana (1’-4’’X1-’4’’)-1no. g) Dub Ditta Khul (2’-6” x 2’-6”) -1no. h) Distributory 7D Paloura (3’-6” x 3’-6”) -1no. i) Gate at Distributory 5C Rajouri Lines (2’X2-6”) -1no. j) Gate at Distributory 7A Poonch Lines (3’X3-6”) -1no. k) Distributory 3B Dhayaran (1’-6” x 8’) -1no. l) Distributory 5A Patoli (2’-6” x 2’) -1no. m) Distributory D6 Muthi (2’-8” x 2’) -1no. n) Distributory 7B Muthi camp (1’-6” x 2’) -1no. o) Distributory 7C BSF School (1’-6” x 3’) -1no. Repair to the below mentioned gates on main Ranbir Canal. Job includes complete dismantling of existing winch machines from its installed position and then extraction of gates by means of chain pulley block, tripod stand and manual labour. Carriage/shifting of the dismantled gates to the workshop for carrying out necessary repairs by loading in the transport vehicle. Repair to the gates by means of cleaning of gates and removal of silt deposited on the gate leaves and then welding of broken joints, welding gate leaf at damaged places. Scrubbing/removal of old rust by using sand paper and applying one coat of red oxide and then applying two coats of anticorrosive paint on both side of the gate. Job also includes lowering the gate to its closed position inside the channel using chain pulley block and tripod stand and providing and fitting of new set of bearings, worm wherever required, nuts and bolts for mounting the gate on end of stem rod. Job also includes greasing of worm and pinion set of gears of winch machine and on all sliding surfaces and then complete assembling of winch machine along with support lugs on the ISMC platform. Complete Job includes cost of material, tools and tackles charges, skilled/semi-skilled labour hire charges, hiring and carriage charges of welding set to site, hire charges of chain pulley block and tripod stand. a) Gate at Distributary 53000 escape channel (6’X6’) -1no. b) Gate at Distributary 73000 escape channel (8’X6’) -1no. c) Head Cross gates of Distributary D9 (6’ x 8’-6’’) -03 nos. d) Gate at Distributary 83000 escape channel (10’X8’) -1no. e) Gate at Distributary D1 head (5’ x 6’) -2no.s

Rebate on Old Parts

M/S HITAISHI ELECTRICALS AND MECHANICAL WORKS

SMART TECH AND CO

JAI MAA BHAGWATI ELECTRICAL AND MECHANICAL WORKS