SPECIAL REPAI REPLACEMENT OF BER DG PUMP SETS (PH I) AND PROVN OF DEFICIENT 15 HP CENTRIFUGAL PUMP SET IN PUMP HOUSE NO 5 (02 JOBS) AT ATS BELAGAVI

Amount

Taking down existing unserviceable pump set and deposited to MES store yard complete all as specified and directed

Supplying, installing, testing and commissioning of Centrifugal pump sets of capacity 15 HP, three phase, 415 Volt suitable for 80/100mm bore pipe for suction and delivery head range 34-50 Mtr, discharge 12 to 19 LPS including provision of suitable PCC foundation for fixing of Pump Sets Make - Kirloskar, Model No KDS 1555+ or equivalent make as specified in list of manufacturers of Particular Specifications Note: 1. Standard test certificate for pump and motor to be submitted by the contractor cost for the same is deemed to be included in the quoted rate. 2. Test results like routine test/Pump performance test/Motor performance/material of construction etc shall be submitted by the contactor after installing the pump sets cost for the same is deemed to be included in the quoted rate.

Supplying, installing, testing and commissioning of openwell Submersible pump set with chrome steel impeller and of capacity 7.5 HP, three phase, Copper enamelled core winding motor 415V, 65/80 mm dia pipe for delivery, and 80 mm dia suction side, head range upto 20-35m ,discharge 8 to 10 LPS including provision of all suitable accessories for fixing of pump sets including provision of suitable PCC foundation for fixing of Pump Sets including taking down existing unserviceable Pump Set and deposited to MES store yard complete all as specified and directed Make - Kirloskar, Model No JOS-854 or equivalent make as specified in list of manufacturers of Particular Specifications Note: 1. Standard test certificate for pump and motor has to be submitted by the contractor cost for the same is deemed to be included in the quoted rate.

Supplying, installing, testing and commissioning of openwell Submersible pump set with chrome steel impeller and of capacity 03 HP, three phase, Copper enamelled core winding motor 415V, 40/50 mm dia pipe for delivery, and 50/40 mm dia suction side, head range upto 26-30m ,discharge 5 to 3 LPS including provision of all suitable accessories for fixing of pump sets including provision of suitable PCC foundation for fixing of Pump Sets including taking down existing unserviceable Pump Set and deposited to MES store yard complete all as specified and directed Make - Kirloskar, Model No JOS-335 or equivalent make as specified in list of manufacturers of Particular Specifications Note: 1. Standard test certificate for pump and motor has to be submitted by the contractor cost for the same is deemed to be included in the quoted rate.

Supplying, installing, testing and commissioning of openwell Submersible pump set with chrome steel impeller and of capacity 02 HP, single phase, Copper enamelled core winding motor 230V, 32/25 mm dia pipe for delivery, and 25/32 mm dia suction side, head range upto 26-30m ,discharge 1.5 to 3.3 LPS including provision of all suitable accessories for fixing of pump sets including provision of suitable PCC foundation for fixing of Pump Sets including taking down existing unserviceable Pump Set and deposited to MES store yard complete all as specified and directed Make - Kirloskar, Model No KOSi-245 or equivalent make as specified in list of manufacturers of Particular Specifications Note: 1. Standard test certificate for pump and motor has to be submitted by the contractor cost for the same is deemed to be included in the quoted rate.

M&L for cutting /breaking of cement concrete path of any thickness with or without reinforcement for taking up/down of Pipes / Cables and connection and making good to match existing surface with PCC (1:2:4) type B1 (using 20 mm graded stone aggregates) complete all as specified as directed.

Taking up Cast iron / GI / MS water main of size 100mm bore including all fittings for spigot and socket ends and lead joints including burning out lead joint and recovering lead complete all as specified as directed.

Taking up Cast iron / GI / MS water main of size 80mm bore including all fittings for spigot and socket ends and lead joints including burning out lead joint and recovering lead complete all as specified as directed.

Taking up or down steel tubing along with fittings such as tee, bends etc fixed to walls and ceilings or laid in flours/trenches and connections incl removal from site of 50mm bore pipe complete all as specified as directed.

Taking up or down steel tubing along with fittings such as tee, bends etc fixed to walls and ceilings or laid in flours/trenches and connections incl removal from site of 40mm bore pipe complete all as specified as directed.

Taking up or down steel tubing along with fittings such as tee, bends etc fixed to walls and ceilings or laid in flours/trenches and connections incl removal from site of 25mm bore pipe complete all as specified as directed.

Supplying, laying and testing 100mm nominal bore ductile iron pipe , spigot and socket including rubber joints , class K-7 complete all as specified and as directed. Note :- Specials and fittings shall be measured and paid separately.

S&F GI tubing 80mm bore medium grade with all new connections and fittings such as tees, bends, elbows, short pieces, connector back nuts, diminishing pieces, caps, plugs unions etc laid in trenches complete all as specified and as directed

S&F MS pipe 100mm bore including MS Flange (heavy duty) including rubber gasket packing suitable nuts, bolts, washers all fittings like brackets of any angle, short pieces, welding the flanges to MS pipe complete including applying two coats with black paint over one coat of red oxide primer externally on the pipe line complete including testing and commissioning to the satisfaction of Engr-in-Charge complete all as specified and as directed

S&F MS pipe 80mm bore including MS Flange (heavy duty) including rubber gasket packing suitable nuts, bolts, washers all fittings like brackets of any angle, short pices, welding the flanges to MS pipe complete including applying two coats with black paint over one coat of red oxide primer externally on the pipe line complete including testing and commissioning to the satisfaction of Engr-in-Charge complete all as specified and as directed

S&F GI tubing 50mm bore medium grade with all new connections and fittings such as tees, bends, elbows, short pieces, connector back nuts, diminishing pieces, caps, plugs unions etc fixed complete to walls and ceiling or laid in floors complete all as specified and as directed

S&F GI tubing 40mm bore medium grade with all new connections and fittings such as tees, bends, elbows, short pieces, connector back nuts, diminishing pieces, caps, plugs unions etc fixed complete to walls and ceiling or laid in floors complete all as specified and as directed

S&F GI tubing 25mm bore medium grade with all new connections and fittings such as tees, bends, elbows, short pieces, connector back nuts, diminishing pieces, caps, plugs unions etc fixed complete to walls and ceiling or laid in floors complete all as specified and as directed

S&F in replacement Cast iron such as bends (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc) tee pieces single branch ‘Y’ junction, double branch, cross (all socket or socket and spigot or flanged and socket etc) color, caps and plugs suitable for CI pipe upto 150mm bore complete all as specified and as directed.

M&L for cutting the existing pipe line insertion of Tee or fixing of slucie valves except DI specials complete all as specified and directed.

Taking down old existing unserviceable sluice valve of 150mm/100mm/80mm dia complete all as specified and directed

S&F cast iron sluice valve PN 1.6, 150mm dia with both ends flanged confirming to the IS 14846 with brass spindle and iron wheel head flanged inclding new rubber gaskets, bolts and nuts complete all as specified and directed

S&F cast iron sluice valve PN 1.6, 100mm dia with both ends flanged confirming to the IS 14846 with brass spindle and iron wheel head flanged inclding new rubber gaskets, bolts and nuts complete all as specified and directed

S&F cast iron sluice valve PN 1.6, 80mm dia with both ends flanged confirming to the IS 14846 with brass spindle and iron wheel head flanged inclding new rubber gaskets, bolts and nuts complete all as specified and directed

Taking down old existing unserviceable gate valve of 40mm/50mm/25mm dia complete all as specified and directed

S&F gun metal, globe or gate valves 50mm dia with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

S&F gun metal, globe or gate valves 40mm dia with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

S&F gun metal, globe or gate valves 25mm dia with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

S&F in replacement footvalve valves of size 80mm dia complete all as specified and as directed.

S&F footvalve valves of size 100mm dia complete all as specified and as directed.

Taking down exisitng copper cable of any size complete all as specified and directed

S&F in replacement 3 core flat multistranded copper cable 10 Sqmm for Centrifugal pump set including necessary connection and testing complete all as specified and as directed.

S&F in replacement 3 core flat multistranded copper submersible cable 6 Sqmm for submersible pump set including necessary connection and testing complete all as specified and as directed.

Taking down old existing unserviceable non return valves of 100mm/80mm complete all as specified and directed

S&F in replacement non return butterfly valves of size 100mm dia complete all as specified and as directed.

S&F in replacement non return butterfly valves of size 80mm dia complete all as specified and as directed.

Supplying, fixing, testing and commissioning Chain Pulley Block 1Ton Single fall CPB with chain 8mm thick including fixing arrangements complete all as specified and directed.

M&L for angle, channels or tee sections, fixed independently, without connection plate, etc for (Fe 410 grade ) including necessary drilled holes, welded together complete all as specified and directed.

Demolition of brickwork and stone / boulder masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Dismantling floor hearth/ wall tiling including cement mortar bedding (but not backing) and removing tiles & rubbish off the premises complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry with solid blocks,in PCC 1:2:4, type B1 (using 20mm graded crushed stone aggregates) exc 10cm in width and setting in CM 1:6 complete all as specified and as directed.

M&L for moorum/ red bajri filling in floors or pavings, laid in layers not exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for broken stone or boulder hardcore of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 100mm thick PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregates) as in sub base of flooring complete all as specified and as directed.

M&L for machine cut Kota stone slab flooring 20mm to 22mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polish laid over and including 20mm screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for machine cut Kota stone slab 20mm to 22mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish laid over and including 10mm thick backing coat in cement mortar 1:3 complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not le. than 1.5 m below normal ground level connected to Galvanized Strip 32x6mm by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm long reinforcement, watering funnel, 15 mm dia light grade pipe for protection of earth electrode 20 mm dia funnel for watering complete all as specified and as directed.

S&F in replacement Fully Automatic Star Delta Starter for 15 HP Centrifugal Pump Set including Contactor, over load relay, & connected wiring etc complete all as specified and as directed. Make - L&T Cat No - SS90705POCO or equivalent make as specified in list of manufacturers of Particular Specifications

S&F Fully Automatic Star Delta Starter for 15 HP Centrifugal Pump Set including Contactor, over load relay, & connected wiring etc complete all as specified and as directed. Make - L&T Cat No - SS90705POCO or equivalent make as specified in list of manufacturers of Particular Specifications

S&F in replacement Fully Automatic Star Delta Starter for 7.5 HP Submerssible Pump Set including Contactor, over load relay, & connected wiring etc complete all as specified and as directed. Make - L&T Cat No - SS96254POVO or equivalent make as specified in list of manufacturers of Particular Specifications

S&F in replacement DOL (Direct on Line) Motor Starter for 3 HP Motor set including Contactor, over load relay, & connected wiring etc complete all as specified and as directed. Make - L&T Cat No - SS97210OOTO or equivalent make as specified in list of manufacturers of Particular Specifications

S&F in replacement DOL (Direct on Line) Motor Starter for 2 HP Motor set including Contactor, over load relay, & connected wiring etc complete all as specified and as directed. Make - L&T Cat No - SS97210OORO or equivalent make as specified in list of manufacturers of Particular Specifications

M/s.GOODWILL ELECTRICALS (BID ID -3072016)

B5BUILDING SOLUTIONS (BID ID -3060230)

M/s PRATAP VIJAYSINGHRAO DESAI (BID ID -3068009)

M/s ASPIRE ENGINEERING ENTERPRISES (BID ID -3063172)