Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹37.3 L+₹46,255.75 (1.26%)Rejected-Finance | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹38.0 L+₹1.1 L (3.03%)Rejected-Finance | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹42.0 L+₹5.2 L (14.1%)Rejected-Finance | L4 | Rejected-Finance Not being lowest |
Tender Value
₹49.2 L
EMD Value
₹98,400
Closing Date
17 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandimandir
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-01/2022-2023 SPL REPAIR TO TOILET CUM BATHROOM, MT GARAGE, REGT STORE, STAIR CASE IN BLDG NO 149 AND SPL REPAIR OF SICK ANIMAL LINE BLDG NO T-3004 UNDER AGE B/R I AT CHANDIMANDIR
2022_MES_517914_1
GE/CHM-01/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹98,400
Yes
23 Jun 2022
12 Apr 2022
24 May 2022
12 Apr 2022
17 May 2022
10 May 2022
60 days
Amount
Demolition of brick work, stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified & directed by Engineer-in-charge.
Material and Labour brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.
Material and Labour Brick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 100Kg/sqcm) old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed.
Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.
Material and labour for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight all as specified & directed by Engineer-in-charge.
Material and Labour 40mm thick cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in flooring, rough finished complete all as specified and directed.
Supply and fix glass dividing strips, 3mm thick, 38mm wide complete all as specified and directed
Taking down wooden chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down wooden chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down shutters of any description exc 1 sqm but n.exc 2 sqm and removing to store complete all as specified and directed.
Material and labour, taking down and re-fixing of shutters of any type description exc 1 sqm but not exc 2 sqm each in same opening after securing or easing & adjusting complete all as specified & directed.
Supply and fix Pressed steel frames 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including fill of PCC 1:3:6 complete all as specified and directed.
Supply and fix Pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including fill of PCC 1:3:6 complete all as specified and directed.
Supply and fix rolled mild steel framed work as in doors or gates of angle or other section conforming to Fe 290 (Gde -E-165 quality B) with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, fittings and hanging, also fastering and fixing, fixed as in repair complete all as specified & directed.
Factory made, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 25 mm thick, ISI marked complete all as specified and directed.
Supply and fix 2nd class hardwood Boarding, 20mm thick plane one side, fixed with nails for cupboard shelves etc complete all as specified and directed.
Factory made, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30 mm thick, ISI marked complete all as specified and directed.
Supply and fix glazed and gauged skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.
Supply and fixing solid PVC frame having profile 105mm x 60mm , single rebate, made out of solid PVC foam with homogenous fine cellular structure having density 750, smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
Supply and fix factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifiecation & drawing complete all as specified and directed.
Supply and fix Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.
Supply and fix Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified.
Supply and fix Aluminium alloy, anodized, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, 250 mm long and dia of rod not less than 12 mm, ISI marked, complete all as specified.
Supply and fix Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified.
Supply and fix 140mm floor door stopper of aluminium alloy body and tongues anodised with hard drawn steel spring, fixed in floorcomplete all as specified and directed.
Supply and fix Galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
Supply and fix framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed by Engineer-in-charge.
Supply and fix, as in repair, steel window, box type, primer coated, 1.00mm wall thickness, with glazing bar and openable shutter prepared to recieve sheet glass, complete including cutting holes, four Nos. for each window and making good dismantled portion in PCC (1:2:4) type B-1. including following fittings welded to frame/ shutter:- (a) Hold fast 150mm out of 25x6mm flat iron made to shape- 04 Nos. each window (02Nos. on each side). (b) Handle of 'Z' section 20mmx25mm, 100mm long- 01No. each leaf. (c) MS tower bolt 150mm long- 02 Nos. each leaf. (d) 'Z' section 20mmx25mm, 100mm long stopper 01 No. each leaf. (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 guage wall thickness, welded to hinge of 55mm size 01 No. per leaf. (f) MS box type hinges of 75 mm size- 02Nos. per leaf. (g) Fabrication & fixing complete. Note: Glass panes & painting shall be measured & paid separately under respective item.s. Design shall be approved from Engr-in-Charge as existing at site and all as per Drawing before fabrication and bulk order to the manufacturer.
All as per serial item No 28 hereinbefore but without glazing bar.
All as per serial item No 28 hereinbefore but top hung shutter ventilator
Material and labour 25mm thick PCC 1:2:4 type B-1 (20 mm graded stone aggs) as in flooring complete all as specified and directed.
Material and labour machine cut Kota Stone Slab flooring, 18 to 22mm thick, best quality (minimum size 58cm x 58cm) over and including cement screed bed 20mm thick in cement mortar 1:4, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab, cutting, rubbing, grinding and polishing (mirror finish) complete all as specified and directed.
Material and labour machine cut kota stone slab flooring 15-18mm thick of size not less than 55cmx55cm , laid and jointed with grey cement slurry mixed with pigment to match the shade of slab,as in in skirting, dados, risers to steps, pillar etc, laid over and including 10mm screed layer in cement mortar 1:4, cutting, rubbing, grinding and polishing complete, all as specified.
Material and labour for providing 1.0mm to 1.5mm thick dune/ grit finish ready mixed product with natural stone granules / minerals in particle size of 400-600, 600-800, 1000-1200 micros consisting of excellent synthetic /acrylic binder anti cracking, anti foaming, anti fungal, anti rusting agents and applied directly over the cement plaster / stone surface over a coat of base coat, including necessary scaffolding work, all as per manufacturer instructions complete all as specified and directed.
Material and labour 18 to 20mm thick baroda green pre polished marble stone slabs, width and length as per site requirement, best quality machine cut and polished to be fixed in floors,cooking plateform, tread, raiser of steps and vertical surfaces etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing, cutting / rounding of edges and corners where required with and including 15 mm thick screed bed in cement mortar 1:4 including dismantling of existing damaged slab complete all as specified and directed.
Material and labour 15-18mm thick black granite slab (of any type & shade as approved), width and length as ordered, best quality machine cut to be fixed on steps, jambs, pillars, window-cills, cooking platforms and like and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing,over screed bed 20mm thick in cement mortar 1:4 complete all as specified and directed.
Material and labour Rounding of / moulding to edge (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified.
Material and labour repair to crumple joint comrise the following item :- (i) Taking out existing pre-cast concrete tile/ slab gently and setting aside. (ii) Taking out existing filled material from crumple joint completely upto slab depth / metal cradle and cleaning the entire surface to the entire satisfication of Engineer-in-Charge. (iii) Provision of 0.63 mm thick PGI sheet metal cradle made to shapte as per TD drawing No TD 144(C) sheet 4R/6 (dt 30.10.09) and fixed on crumple joint with approved joint sealer as per manufacturer instuctions. (iv)Filling the joint with approved joint filler and joint sealer to the required depth after applying approved primer as per manufacturer instructions. (v) sealing the crumple joint with approved joint sealer (vi) Provn of cement plaster and two layers of 3m thick, five layered APP modified polymeric membrane as shown on TD 144(C) sheet 4R/6 (dt 30.10.09). For fixing second layer of APP membrane approved bitumen primer shall be applied @ 0.4 litre/sqm
Demolition of cement concrete on any description and in any position (in sunken portion) not other wise specially provided for and removing all demolished material/debris exc 250m but n.exc 500m form the sie and depositing where directed complete all as specified and directed.
Supply and fix PVC 50mm dia spout pipe 450mm long and embedded in PCC 1:2:4 at bottom slab level complete all as specified and directed.
Material and labour providing cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate as in sunken floor admixing Fosroc Conplast WL @ 125ml per 50 Kg cement bag complete all as specified and directed.
Material and labour water proofing treatment to SUNKEN PORTION and adjoining walls of kitchen, WC, Bath & Toilet, etc, as follows, complete all as specified & directed :- (a) 15 mm thick plaster in cement mortar (1:3) mixed with WP compound as per manufacturer's instructions shall be provided on sunken portion after roughening of surfaces. (b) Apply cement slurry to the surface @ 0.488 kg /Sqm of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.253 kg/Sqm and the surface will be allowed to air cure for 4 hours. (c) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and the surface will be allowed to air cure for 4 hours. (d) Pond curing of sunken portion for minimum of 48 hours. (e) Paste one layer of 3mm thick APP membrance with bitumen by torch application to the the treated sunkensurface. (f) Joints/ traps /WC /soil pipes shall be properly sealed with approved sealing compound.
Material and labour providing protection layer applying 15mm thick cement plaster in cement mortar 1:4 (cement & coarse sand) admixing Fosroc Conplast WL @ 125ml per 50kg cement bag complete all as specified and directed.
Material and labour hard core of gauge not exc 63 mm deposited spread and lavelled in layers n-exc 25 cm watered & rammed to a true surface with broken bricks complete all as specified.
Material and labour plain cement concrete 1:2:4 type B-1 uisng 20mm graded stone aggregate 75mm thick for floor, admixing Fosroc Conplast WL @ 125ml per 50Kg cement bag including top coating using Fosroc Nitobond SBR, mix ratio 1:1½ all in complete as per manufactures specifications complete all as specified & directed.
Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises complete as specified and directed.
Material and labour glazed ceramic tiles, coloured in vertical surface 350mm x 250mm x 7mm, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Material and labour non skid ceramic coloured tiles, joint free, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 Square metre but not exceeding 0.18 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.
Material and labour 15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
Material and labour Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), inclunding using water proofing compound complete all as specified. Note : WPC shall be measured and paid separately.
Supply only integral water proofing compound (ISI Marked) complete all as specified & directed.
Material and labour for applying 15mm thick cement plaster in cement mortar 1:2:2 (cement : fine sand : coarse sand) admixing Fosroc Conplast WL @ 125ml per 50 Kg cement bag all in complete as per manufactures specification including necessary scaffolding as required or all as specified and directed.
Material and labour for applying 10mm thick cement plaster as in ceiling in cement mortar 1:2:2 (cement : fine sand : coarse sand) admixing Fosroc Conplast WL @ 125ml per 50 Kg cement bag all in complete as per manufactures specification including necessary scaffolding as required or all as specified and directed.
Material and labour 10mm thick rendering in Cement and Sand mortar 1:3 concrete surfaces as in ceiling / chajjas facia at any position finished even and smooth without using extra cement complete all as specified and directedng
Material and labour preparation of new plastered surfaces of walls and applying two coats of cement base paint, over a coat of primer complete all as specified and directed.
Material and labour preparation of old plastered or un-plastered surfaces of walls and applying two coats of cement base paint, including complete removal of existing treatment complete all as specified and directed.
Material and labour applying two coats of oil bound distemper on new plastered wall surface over a coat of wall primer complete all as specified and directed.
Material and labour preparation of old decorated plastered or unplastered surfaces of walls, applying two coats of oil bound distemper complete all as specified and directed.
Material and labour Two coats of white washing on old ceiling/chajja surfaces including preparation of celing surfaces complete all as specified and directed.
Material and labour Three coats of white washing on new ceiling/chajja surfaces including preparation of celing surfaces complete all as specified and directed.
Material and labour Two coats of white washing on old wall surfaces including preparation of wall surfaces complete all as specified and directed.
Material and labour Three coats of white washing on new wall surfaces including preparation of wall surfaces complete all as specified and directed.
Material and labour preparation of old wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
Material and Labour preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and Labour two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth over a coat of red oxide including preparation of new surfaces complete all as specified & directed.
Material and labour preparation of old painted steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) complete all as specified & directed by Engineer-in-charge.
Hacking out old broken glasses (any thickness, size, quality or description) from metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed by Engineer-in-charge.
Supply and fix 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
Supply and fix 3mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc, and making good, cutting not exceeding 10 cm girth, in brick walls, complete all as specified.
Taking up or down steel tubing and connections 15mm bore from walls, floors etc including cutting chases and making good in cement mortar 1:3 complete all as specified and directed
Taking up or down steel tubing and connections 20mm bore from walls, floors etc including cutting chases and making good in cement mortar 1:3 complete all as specified and directed
Supply and fix, Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.
All as per item No. 74 hereinbefore but except GI pipe using old pipe retrieved
Supply and fix, Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.
All as per item No. 76 hereinbefore but except GI pipe using old pipe retrieved
Supply and fix 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, PTMT 20mm dia ball valve, including dismantling of existing water tank and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
Supply and fix 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, PTMT 20mm dia ball valve, including dismantling of existing water tank and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
Supply and fix float valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for 25mm bore pipe (minimum weight 455gms ), fixed as in repair complete all as specified and directed.
Supply and fix 15mm bore Gun-metal, globe or gate valves(Quarter turn), with MS lever handle, screwed both ends for iron pipe fixed in repair complete all as specified and directed.
Supply and fix 20mm bore Gun-metal, globe or gate valves(Quarter turn), with MS lever handle, screwed both ends for iron pipe fixed in repair complete all as specified and directed.
Supply and fix bib taps, fancy type, long body with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Supply and fix bib taps, fancy type, short body with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Supply and fix angular stop cock, cast copper alloy, chromium plated fancy type, screwed both ends for iron pipe or for union, suitable for 15mm bore pipe, fixed in repair complete all as specified and directed.
Supply and fix stop valve (concealed type), cast copper clloychromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Supply and fixing towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 170gms), fixed as in repair complete all as specified and directed.
Supply and fix for 15mm bore pillar tap, long neck, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair, complete all as specified and directed.
Supply and fix 32mm dia waste coupling / waste fitting of PTMT any colour high-pressure screwed for iron pipe and fixed (minimum weight 45 gms), fixed as in repair complete all as specified and directed.
Supply and fix in repair, 32mm/40mm dia, 800 mm long PVC waste pipe for wash basin, sink , urinal etc fixed as in repair complete all as specified & directed by Engineer-in-charge.
Supply and fix swivel shower of PTMT any colour with shower arm 195mm long with bend of 45 degree with flange of PTMT any colour (minimum weght 40 gms), fixed as in repair complete all as specified & directed by Engineer-in-charge.
Supply and fix PTMT shelf 450 mm x 124 mm any colour with brass chromium plated screws & PVC rawl plugs (Minimum weight 300 gm) fixed in repair, complete all as specified and directed.
Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm fixed in repair, complete all as specified and directed.
Dismantling of cast iron pipes with all fittings and fixing acessories, jointed in cement mortar 75-100 mm bore, at any location, complete all as specified.
Supply and fix UPVC (SWR) pipe, Type B, 110mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
Supply and fix UPVC (SWR) pipe, Type B, 75mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
Supply and fix 110mm bore PVC (SWR) bends any radius complete all as specified and directed.
Supply and fix 75mm bore PVC (SWR) bends any radius complete all as specified and directed.
Supply and fix 110 mm or 75 mm dia PVC (SWR) vent cowl any radius complete all as specified and directed.
Supply and fix 110 mm dia PVC (SWR) WC connector complete all as specified and directed.
Supply and fix 110 mm dia PVC (SWR) junction single ( single T ) equal or unequal complete all as specified and directed.
Demolition & breaking of AC rain water 100mm dia bore set in cement mortar completed all as specified & directed.
Supply and fix UPVC (SWR) rain water pipe, Type B, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, icomplete all as specified and directed.
Supply and fix Low density polythene pipes of dia 50mm bore (LDPE) of pressure rating 6 Kgf/cm2 fixed complete to walls, ceiling or in floor and including elbow, bend & Tee etc. Complete all as specified and directed
Supply and fix 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified & directed by Engineer-in-charge.
Supply and fix grating doom 100mm dia of PTMT (Minimum weight 40gms), with waste hole fixed as in repair complete all as specified & directed by Engineer-in-charge.
Supply and fix in repair, vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) and making good to the floor complete all as specified & directed by Engineer-in-charge.
Supply and fix PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection with PTMT nuts and 32mm dia PVC long bend for squat pattern WC , set with concrete and making good to floor, fixed as in repair complete all as specified & directed.
Supply and fix Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts, fixed as in repair, complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and exceeding 1.5m deep but not exceeding 3.00m deep for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in hard and dense soil all as specified & directed by Engineer-in-Charge.
Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified.
Removal of excavated material to distance not exceeding 250 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point in soil, complete all as specified and directed.
Demolition and breaking up drain pipes (Salt glazed stone ware / AC/RCC drain pipe etc) internal dia of pipe 150mm. Set in cement mortar including PCC packing in bed and hunching complete all as specified and directed (excavation and earth work shall be measured and paid separately).
Material and labour for plain cement concrete type C-2, 1:3:6 using 40mm graded crushed stone aggregate as in bed to drain pipes including packing under & haunching against the sides of pipes (150mm bore pipe) after the pipe are laid and tested complete all as specified and directed.
Material and labour for RCC pipes class NP2 150mm dia bore, with collars, ISI marked, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed (excavation, earthwork and PCC shall be measured and paid for separately)
Material and labour for plain cement concrete 1:4:8, nominal mix, type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete, all as specified & directed.
Material and labour providing cement concrete 1:2:4, type B-1 using 20mm graded stone aggregage as in roof kerb or mud stops, rounded and chamfered on edge complete all as specified and directed.
Material and labour PCC 1:3:6 type C1 (20 mm graded stone aggs) as in coping complete all as specified and directed.
Material and labour for precast cement concrete type B-1, 1:2:4 using (20 mm graded crushed stone aggregate) as in man hole cover and setting in cement mortar 1:4 complete all as specified and directed.
Demolition of reinforced cement concrete, reinforcement cut as required to facilitate, of any description as in parapet, roof wall, slab, chajjas, shelves and similar work in any position not otherwise specifically provided for, complete all as specified and directed.
Material and labour reinforced cement concrete 1:1.5:3, nominal mix, type A-1 using 20mm graded crushed stone aggregate as in Chajja and similar works, all as specified. Note : Reinforcement and form work shall be measured and paid separately
Material and labour mild steel TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
Material and Labour mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified & directed.
Material and labour form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for roughly finished flat surfaces of concrete, all as specified.
Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in plain cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required, internal dia of pipe 150mm all as specified and directed.
Supply and fixing vitreous china bowl urinal flat back, half stall type, white with grating and union for discharge pipe including all fixing accessories and waste pipe, fixed as in repair complete all as specified and directed.
Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) inclusive taking out vegetation, plants & grubbing out the roots completely complete all as specified & directed.
Demolition of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed.
Cutting out cracks to V section to 25 mm depth in existing roofs or terracing, cleaning out, wetting,and painted with shalitex primer and filled with sealing compound , tarplastic of STP or equivalent. complete all as specified and directed.
Material and labour PCC 1:3:6 type C1 (20 mm graded stone aggs) as in roof padding, roof kerbs rounded or chamfered on edges complete all as specified and directed.
Material and labour for rendering 15mm thick (average thickness) plaster in cement mortar 1:4 mixed with WPC on concrete roof surfaces including flashings and junction of parapets etc , finishing the surface even and fair without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).
Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including applying bituminous primer @ 0.40 ltrs per square meter over clean RCC/plastered roof surfaces and adjoining vertical surfaces complete all as specified.
Material and labour 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions including dismantling of existing felt /treatment, complete all as specified & directed.
Material and labour 40mm thick brick tiles with including 20mm thick cement mortar 1:4 jointed grouted and pointed complete mixed with crude oil 5% by weight of cement complete all as specified and directed.
All as per serial item No 134 herein before but except tiles –ditto-
Material and labour 25mm thick precast cement concrete 1:3:6 type C-0 using 12.5mm graded stone aggregate as in louvers or jallies (measured solid), including all mouldings but excluding frame, set in cement mortar (1:4) complete all as specified & directed by Engineer-in-charge.
Material and labour cleaning removing of all waste material, sludge, silt , mud and garbage and vegitation etc from shafts of toilet block sewerage shaft and removing of all waste materials exc 250 Mtrs but not exc 500 Mtrs and repair of plaster, flooring, pointing brick work ad plumbing work etc in shaft in fowl condition as directed . NOTE : Plumbing, flooring, plastering etc will be measured and paid separately in respective items)
Dismantling asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified & directed by Engineer-in-charge.
Supply and fix pre-painted galvalume aluminium zinc coating (AZ70)GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.
Supply and fix pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips , valley gutters, drip and straight flashing(length and girth as fixed), fixed with self tapping screws complete all as specified & directed by Engineer-in-charge.
Dismantling timber scantling exc 40 Sqcm in section in any position unframed work & removing from site complete all as specified and directed.
Material and labour rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to grade Fe.290.Gde-E-165,complete all as specified and directed.
Taking down carefully aluminum/copper point wiring on & including hard wood battens, surface conduit and board/blocks etc or through conduits for light , socket or power point ,fan point complete incl fitting such as switches ,sockets, ceiling rose , holder socket, light fitting, regulators and making good disturbed surfaces of wall, floor , ceiling etc and removing materials (other than those for which credit has been given by the contractor) to the MES stores yard for keeping in safe custody complete all as specified and directed.
Material and labour point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit 20mm bore, terminated on and including new steel sunken boxes 1.2mm thickness covered with provision of 3mm thick plastic laminated sheet, comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original finishes surface and nothing extra shall be paid on this account.
All as per serial item 144 herein before but for socket outlet 3 pin 6 Amps on same board complete all as specified and directed
All as per serial item 144 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed
All as per serial item 144 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor
Supply & Fixing for switch piano, flush type, 6 amps, 230 volts, single pole, one way (ISI marked) complete all as directed
Supply & Fixing for switch piano, flush type, 16 amps, 230 volts, single pole, one way (ISI marked) complete all as directed
Supply & Fixing for sockets outlet multipurpose 2 in 1 pin, 6 Amps flush type ISI marked all as specified and directed
Supply & Fixing for sockets outlet multipurpose 2 in 1 pin, 6/16 Amps flush type ISI marked all as specified and directed
Supply & Fix stepped type electronic fan regulator switch piano flush type complete all as specfied and directed.
Supply & Fixing for ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.
Taking down of ceiling/exhaust fan & keeping in safe custody & refixing the same on the same location after cleaning the fan, complete all as specified & directed .
Supply & Fix for LED CRCA batten with decorative end cap complete with retrofit T8 Polycarbonate / Glass Tube 20 watts capacity 4 feet long and white light and including connections from ceiling rose complete , all as specified and directed. Make C&S Cat No LTDC01220WLED/WD or equivalent makes mentioned in Appx 'C'.
Supply and fix for LED CRCA batten with decorative end cap complete with and including retrofit polycarbonate/glass tube 10 watt capacity 2 feet long & white light and incl connections from ceiling rose complete all as specified and directed. Make:- C & S Cat part No LTTB2F10WLED/W or equivalent makes mentioned in Appx 'C'
Supply and fixing for bulk head fitting in engineering plastic housing with clear prismatic diffuser 6 watt capacity complete all as specified and directed.
Supply and fix for Lamp holder, PVC/Polycarbonate type with back plate angular type fixed on wall suitable for batten fitting complete all as specified and directed.
Disconnecting the power supply and taking down carefully by unscrewing from boards fittings and fixtures such as DBs, Junction Box, Panels of any size complete with all MCCB's ,MCB's etc and removing from site, all as specified and directed by Engr-in charge.
Supply and fix MCB DB, with provision for incoming 2 pole (MCB / Isolator ) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, double door of metal 8 way complete all as specified and dircted.
Supply and fix MCB DB, with provision for incoming 2 pole (MCB / Isolator ) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, double door of metal 4 way complete all as specified and dircted.
Supply & Fix MCB ,SPN, 240 volt, 40Amp, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed
Supply & Fix MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed
Taking down carefully old copper or aluminium sub main wiring of any Nos of wiring and size with earth wire on wooden batten/ surface conduit/ casing- capping complete with its all accessories and making good disturbed surfaces of wall , floors etc complete all as specified & directed by Engineer-in-charge.
Supply and fixing sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 6 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 6 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through PVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfaces after taking out old unserviceable sub main wiring complete by provding by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 06 sqmm and one single core of 06 sqmm cable along with PVC conduit shall be considered as 1 running metre. (ii) cutting chases and PVC conduit will be measured and paid separately
Supply and fix metalic body exhaust fan 300mm sweep, 240 volt, 50 Hz, with louvers heavy duty, 1350 to 1400 RPM, single phase including making connection with suitable size twin core cable complete all as specified and directed. MAKE : Havell's / BAJAJ/Crompton/Khaitan
Supply & fixing of 25 to 32 mm dia, rigid non metallic PVC concealed conduit, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, complete all as specified
Supply and fix LED lamp 9 watt capaciy complete all as specified and directed. Make : C&S cat Part No LTHPLEDLAMP9WB22 or equivalent makes mentioned in Appx 'C'.
aggarwal contractors and engineers
Gunjan and Gunjan Associates
MS GURENDER SINGH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .