Decorative Work and Supplying of Furnishing Equipments and Decorative Articles at Circuit House, Khunti, Dist.- Khunti for the Year 2023-2024

Amount

Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing, cleaning and preparing the walls, scafolding, washing of floor and taxes all complete as per building specification and direction of E/l.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, The perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Providing and fixing brass 100mm morti lake thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately).

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Providing designation 75 B brick work in C.M.(1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scaffolding, raking out joints to 15 mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.

Dismantling old plaster and pointing in cement or lime and rading out joints to 15 mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing 12 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5 % cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. Area of slab over 0.50 sqm

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes.

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Single tee with door 110x110x110 mm

Single tee without door 110x110x110 mm

Bend 87.5° 110 mm

Shoe (Plain) 110 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

20 mm nominal outer dia Pipes

Providing and Laying Mexican Grass turf with earth 50mm to 60mm thickness with all complete as per specification and direction of E/I.

Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)

Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge.

Carriage of materials from nearest approved sourses of supply including loading into trucks and unloading from truck and stacking properly at work site etc. all complete job as direction of E/I. a) Earth leads up to 3 K.M.

Providing and fixing Glazed Vitrified Tiles (Full Body Vitrified Tiles) conforming to IS: 15622 (thickness to be specified by the anufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Glazed Vitrified Tiles (Full Body Vitrified Tiles) floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.(Size of Tiles 600 x 600 mm)

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 x 2.5sqmm + 2 x 2.5 sqmm each wire

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supply and instalation of (Theme Based Painting) with Framing all complete as per specification and direction of E/I.

Supplying, fitting and fixing Gas charging charges up to 2 TR air conditioner as per direction of E/I.

Supplying, fitting and fixing Gas top up charges as per direction of E/I.

Supplying, fitting and fixing Normal Refrigerant piping up to 2 TR air conditioner as per direction of E/I.

Supplying, fitting and fixing Soft Drain PVC blended pipe as per direction of E/I.

Supplying, fitting and fixing of Reddy made outdoor unit bracket in direction of E/I.

Supplying, fitting and fixing Old refrigerant pipe tubular natal insulation as per direction of E/I.

Supplying, fitting and fixing air conditioner installation charges as per direction of E/I.

Supplying and installation of 8 mm thick Synthetic ribbed triple foot mat in 1 m width, with rubber backing, as per specification and direction of E/I.

Modular Aluminium extrusions (Alloy 6060 as per European standards EN 755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet with Premium grade Anodizing (Thickness 15-20 microns, as per International standards), with Lifetime warranty under normal working conditions. Size 6 inches x 12 inches

Supplying and installation of 12 mm thick Ply wood Supply on Site as per specification and direction of E/I. (Make :- Greenpanel / Green decor or Equivalent)

Supplying and installation of Decorative High Pressure 1mm Laminate on Site as per specification and direction of E/I. (Make :- Greenpanel / Green decor or Equivalent)

Supplying and installation of Center Table on Site as per specification and direction of E/I. (Make :- Greenpanel / Green decor or Equivalent)

Providing Supply,fixing and fitting of 19mm & 12mm thick water proof ply and making (Study Desk ) with 1mm Laminate Pasting (Green Decor) with material ( including all fancy fitting, lock, etc ) and labour all complete as per building specification and direction of E/I.

Providing Supply,fixing and fitting of 19mm & 12mm thick water proof ply and making (TV Stand ) with 1mm Laminate Pasting (Green Decor) with material ( including all fancy fitting, lock, etc ) and labour all complete as per building specification and direction of E/I.

Providing Supply,fixing and fitting of 19mm & 12mm thick water proof ply and making (TV Stand & Fridge Con) with 1mm Laminate Pasting (Green Decor) with material ( including all fancy fitting, lock, etc ) and labour all complete as per building specification and direction of E/I.

Providing Supply,fixing and fitting of 19mm & 12mm thick water proof ply and making (Wardrobe, Dressing & Luggage Stand) with 1mm Laminate Pasting (Green Decor) with material ( including all fancy fitting, lock, etc ) and labour all complete as per building specification and direction of E/I.

Providing Supply,fixing and fitting of 19mm & 12mm thick water proof ply and making (Plang Double Bed) with 1mm Laminate Pasting (Green Decor) with material ( including all fancy fitting, lock, etc ) and labour all complete as per building specification and direction of E/I.

Providing and fixing of 8 mm wooden laminate floor with 2 mm thick Kini Foam under layer (Make :- Action, Green, Deco foot or Equivalent.)

Supplying and Fixing & Fitting of Window Curtain in the direction of E/I.

Supplying and Fixing fabric accoustic Padding with 6mm Ply and 12mm foam as directed by the Engineer-in-Charge.

Supplying and Fixing & Fitting of Artificial Grass in the direction of E/I.

Supplying and Fixing & Fitting of Supply Mirror 8mm in the direction of E/I.

Supplying and Fixing & Fitting of Carpet Bed Side in the direction of E/I.

Supplying and Fixing & Fitting of Footmat in the direction of E/I.

Supplying and Fixing & Fitting of Quilt Double in the direction of E/I.

Supplying and Fixing & Fitting of Bedsheet Double Cover in the direction of E/I.

Supplying and Fixing & Fitting of Cushion in the direction of E/I.

Supplying and Fixing & Fitting of Kaleen in the direction of E/I.

Supplying and Fixing & Fitting of King Koil Euro Back 78 x 72x 6(Mattress) in the direction of E/I.

Supplying and Fixing & Fitting of Shower Curtain in the direction of E/I.

Supplying and Fixing & Fitting of Wall Paper in the direction of E/I.

Supply and installation of Mortice Lock as per specification and direction of E/I. (Make :- AKS, Godrej or Equivalent)

Supply and installation of Antique 10" rose Handle as per specification and direction of E/I. (Make :- AKS, Godrej or Equivalent)

Supply and installation of 5" x 1" x 2.5 mm Antique Hinges as per specification and direction of E/I. (Make :- AKS, Godrej or Equivalent)

Supplying, Fitting and Fixing of Basin Console Lavatory in the Direction of E/I. (Make :- TOTO)

Supplying, Fitting and Fixing of Basin Divertor in the Direction of E/I. (Make :- JAQUAR)(FLS-WHT-5601)

Supplying, Fitting and Fixing of C P WEST in the Direction of E/I.

Supplying, Fitting and Fixing of Bottle Trap in the Direction of E/I. (Make :- JAQUAR)

Supplying, Fitting and Fixing of Soap Dispenser in the Direction of E/I. (Make :- JAQUAR)

Supplying, Fitting and Fixing of WALL HUNG TOILET((Make :- TOTO) as per specification and direction of E/I.

Supplying, Fitting and Fixing of SLIM SEAT & COVER (Make :- TOTO) as per specification and direction of E/I.

Supplying, Fitting and Fixing of TWO WAY BIB (Make :- TOTO) as per specification and direction of E/I.

Supplying, Fitting and Fixing of (HEALTH FOCET) ((Make :- TOTO) as per specification and direction of E/I.

Supplying, Fitting and Fixing of Toilet Roll Holder in the Direction of E/I. (Make :- JAQUAR) (ACN-CHR-1153S)

Supplying, Fitting and Fixing of Concealed Cistern in the Direction of E/I. (Make :- TOTO)

Supplying, Fitting and Fixing of Shower Single Lever Divertor in the Direction of E/I. (Make :- TOTO)

Supplying, Fitting and Fixing of Over Head With Arm in the Direction of E/I. (Make :- TOTO)

Supplying, Fitting and Fixing of Two Way Spout in the Direction of E/I. (Make :- TOTO)

Supplying, Fitting and Fixing of Hand Shower in the Direction of E/I. (Make :- TOTO)

Supplying and installation of Soap DISk as per specification and direction of E/I.

Supplying and installation of Towel Rack as per specification and direction of E/I.

Supplying and installation of Coat Hook as per specification and direction of E/I.

Supplying, Fitting and Fixing of Angular Stop Cock in the Direction of E/I. (Make :- JAQUAR)(FLR-CHR-5053N)

Supplying and installation of Geyser in the direction of E/I.

Supplying and installation of Harmony Try Large in the direction of E/I.

Supplying and installation of Camal Phalas 1.5 Ltr in the direction of E/I.

Supplying and installation of Eletric Kettle in the direction of E/I.

Supplying and installation of Suger Port in the direction of E/I.

Supplying and installation of Muddy Mug in the direction of E/I.

Supplying and installation of Ocean Long Coat in the direction of E/I.

Supplying and installation of Dustbin in the direction of E/I.

Supplying and installation of Planter in the direction of E/I.

Supplying and installation of Hanger in the direction of E/I.

Supplying and installation of Flower Base in the direction of E/I.

Supplying and installation of Flower Base in the direction of E/I.

Supplying and installation of Plant in the direction of E/I.

Supplying and installation of 9w LED COAB LIGHT ( Anchor , Philips or Equivlent ) in the direction of E/I.

Supplying and installation of Mirror LIGHT ( Anchor , Philips or Equivlent ) in the direction of E/I.

Supplying and installation of 2' x 2' Lightin the direction of E/I.

Supplying and installation of HANGING Jumar LIGHT .direction of E/I.

Supplying and installation of Fancy Double Light ( Philips Or Equivlent ) in the direction of E/I.

Supplying and installation of Fancy Single Light ( Philips Or Equivlent ) in the direction of E/I.

Supplying and installation of Exhaust Fan BAJAJ (070049) 250MM VENTI ( Bajaj , Orient or Equivlent ) in the direction of E/I.

Supplying and installation of LED STRIP LIGTH in the direction of E/I.

Supplying and installation of Fany Type CILLING FAN Electric 1200 mm AEROQUIET FAN WHITE in the direction of E/I.

Supplying and installation of TH-55LX750DX-55" 4K ANDROID TV in the direction of E/I.

Supplying and installation of TATA SKY in the direction of E/I.

Supplying and installation of M051RSWC LG DC REF.BETTER in the direction of E/I.

Supplying & Installation of 1000mm dia logo of Jharkhand Government make of stainless steel all complete as per direction of E/I.

Supplying & Installation of Letter writing in Hindi font of size 500mm "Circute House, Khunti" make of stainless steel & write "Entrance and Exit Door" at exit and entrance gate side with all complete job as per direction of E/I.

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

K & G ASSOCIATES