SPECIAL REPAIR TO BUILDING NO T16 SNCOS BILLET AT AIR FORCE STATION MAHARAJPUR

Amount

Demolition of PCC in ground floor and pavings not exc 15 cm thickness below or above ground level including removal of debris etc to a distance exceeding 250M but n. exc 500M complete all as specified and directed. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non skid, joint free, coloured ceramic tiles 7-8mm thick (Square/Rectunglar), as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:4), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm complete all as specified and directed.

M&L for coloured, glazed ceramic tiles size 350x250x7-8mm or 450x300x 7-8mm thick as in dado/ skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, laid with and including over 10mm thick rendering in CM (1:3) all as specified and directed.

S&F drapery rod fancy type, made out of 25mm dia MS pipe having wall thickness 0.63mm bright finish, colour and pattern as approved by GE, over all dia 28-29mm complete all as specified and directed. Make: Aerolux/ MEC/ Vista.

M&L for 50 mm thick PCC 1:2:4 mix, type B1 (using 20mm graded stone aggregate) as in flooring complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, ( excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc., complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connection to pipe complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 580mm x 450mm excluding taps, chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & PTMT waste coupling OF 32mm dia and fancy type 15 mm bore brass Pillar Tap complete all as specified and directed. Note : Rate quoted under this item deemed included fixing of taps, plug and chain and connecting up to supply pipes, wastes or traps etc.

Taking down old damaged cement plaster in any description on brick or stone wall etc., incl hacking out joints for key scrubbing down with water etc. complete all as specified and directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement Mortar 1:6, complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or on concrete surfaces in Cement Mortar 1:6 surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or on concrete surfaces in Cement Mortar 1:4 mixed with water proofing compound as per manufacturers instructions surface finished even and smooth without using extra cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately under respective item of BOQ.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of new plaster surfaces of wall and applying two coat of oil bound distemper over and including a thin layer of wall care putty and one coat of primer complete all as specified and directed.

M&L preparation of newly plastered surface of wall and applying two coats of cement based paint over and including a thin layer of wall care putty and coat of primer complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections, including seggregation serviceable pipes cleaning for re-fixing or removal unserviceable pipes from site complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including seggregation serviceable pipes cleaning for re-fixing or removal unserviceable pipes from site complete all as specified and directed.

S&F GI tubing 15mm dia bore medium grade with and including all fittings ISI marked and fixed to wall, floor and ceiling etc complete all as specified and as directed.

S&F GI tubing 20mm dia bore medium grade with and including all fittings ISI marked and fixed to wall, floor and ceiling etc complete all as specified and as directed.

Dismantling of asbestos cement ( corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling of timber scantling (Unframed Work) 40 sqcm and over in section, in any position as in framed work complete all as specified and as directed.

Dismantling framed trusses not exc 10 M Span complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tank of capacity 500 Litre, double layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings, of following capacity of tank complete all as specified and as directed.

S&F ball valve 20 mm bore (Minimum weight 210 grams) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes or brass ferrule and fixed of following size complete all as specified and as directed.

S&F in repair Brass Chromium plated hand faucet with flexible pipe length not less than 1.00 M (Minimum) fixed for EWC/IWC suitable for 15 mm pipe complete all as specified and directed.

S & F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S & F in repair Bib taps, 15 mm dia, cast copper alloy, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

M&L for mild steel work as in roof trusses (Framed), trussed purlins, crane gantries, rail and fastening and heavy bracket framing (Beam, Tee, Angle, Channel or flat sections) including distance pieces, cleats etc confirming to Fe-290 (Gde E-165) Quality A complete all as specified and directed.

S&F for colour coated, pre-profiled (Trapezoidal or High Rib) Galvalume steel sheet, 0.5mm thickness, aluminium zinc coating of 120 gms, top organic coating of polyster paint 16-18 microns over 5-7 mocrons epoxy primer fixed on angle iron bracket with & including self drilling and self tapping screws of appropriate size, sealed with integrated EPDM rebber washer for water tight fixing and side laps to be stiched using Alluminium pop rivets fixed on top of roof complete all as specified and directed.

S&F for colour coated, Plain Galvalume steel sheet, 0.5mm thickness, aluminium zinc coating of 120 gms, top organic coating of polyster paint 16-18 microns over 5-7 mocrons epoxy primer fixed on angle iron bracket with & including self drilling and self tapping screws of appropriate size, sealed with integrated EPDM rebber washer for water tight fixing and side laps to be stiched using Alluminium pop rivets fixed on top of roof complete all as specified and directed.

S&F in repairs PVC connections 15mm size of PTMT of 450mm long. complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube fixed with 75mm long MS screws with PVC fasteners to wall all including repair of james of wall & finishes complete all as specified and directed .

S&F factory made solid PVC moulded door shutter, 30mm thick (Stiles),consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stilesand plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail all as specified and directed.

S&F in repair 18mm thick solid UPVC ply of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screwes, solvent cement /adhesive to make kitchen cabinate and cup board shutters complete all as specified and directed.

S&F in repair18mm thick UPVC coated ply of grade 1 quality of both side white colour fixed with screwes ,solvent cement /adhesive to making of furniture /wall panlling/ CBs shutters etc. complete all as specified and directed.

S&F hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws of size 125 mm complete all as specified and directed.

Supply and fixing of rubber beading 40mm strip in bottom of door complete all as specified and directed.

S&F 4.80 mm thick sheet glass ordinary quality type & glazing with oil putty in squares not exc 0.5 Sqm in each pane, incl hacking out old broken glass pane of any thickness and size complete all as specified and directed.

S&F stainless steel handles of 100mm long for kitchen cabinate shutter complete all as specified.

Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) of of area not exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) of of area exc 1.50 Sqm but not exc 4 Sqm each complete all as specified and directed.

S&F second class hard wood (Sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 35mm thick factory made plain framed, panelled shutters (two panel) of IInd class hard wood rail and styles with lock rail and panel of 9 mm BWP commercial ply. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified.

S&F 35mm thick factory made second class hard wood glazed and skeltron door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note :- Size of member of shutters as specified in SSR Part-I (2009) section 8 clause 8.20 (a).

S&F 100 mm long butt hinge, extruded aluminium alloy with galvanized mild steel hinge pin, powder coated of required tint to match shutter and fixed, type B-21 complete all as specified and directed.

S&F mild steel pressed handles oval type, stove enameled black of size 50 mm complete all as specified and directed.

S&F anodised aluminium barrel tower bolts of extruded section of size 150mm complete all as specified and directed.

S&F anodised aluminium handles cast type of size 150mm complete all as specified and directed.

S&F 140mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 150mm mild steel helical door springs fixed by welding to steel frame or by screwing to wooden frame complete complete all as specified and directed.

S&F anodised aluminium sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of size 250mm complete all as specified and directed.

S&F galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window, completed all as specified and directed.

M&L for PCC (1:3:6) type C0 (using 12.50mm graded stone aggregate) as in coping and similar work including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

M&L for mild steel work as in hold fast or similar work complete all as specified and directed.

M&L for preparations of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paints over and including a coat of red oxide primer all as specified and directed.

M&L for two coats of synthetic enamel paint over and including a coat of pink primer including preparation of new wood or wooden base surface over 10cm width or grith complete all as specified and directed.

S&F in repair soap dish brass chromium plated fixed with CP screws and wood cleats with wall complete all as specified and directed.

S&F in repair for HPSC pre-prime 4mm thick non asbestos fiber cement building board (E-classic) decorative finish fixed to aluminum or MS galvanised snap grid frame work with hold down clips in ceiling complete all as specified.

S&F in repair suspended false ceiling grid system of size 600 x 600 mm with main runner of size 32 x 24 x 0.8 mm, cross tee of size 26 x 24x 0.80 mm and wall angle of size 22.2 x 22.2 x 0.65 mm in ceiling suspended @ 1.2m c/c both way with 1.60 mm dia GI wire fixed with steel dash fasterers or from purlin of roof with butterfly clips hold down etc, complete (main runner/ cross tee / wall angle of MS powder coated) as per manufacturere instruction complete all as specified.

S&F including fabricating of aluminium powder coated having minimum thickness of powder coating 50 micron for door / window/ ventilator frame, shutters & partition including necessary joining cleats, glazing clips, aluminium snap beading having minimum wt 100gm/RM, rubber neoprene gasket, screws, dash fasteners, rawel plug for fixing of screw in wall or floor etc., aluminium sections as approved by GE complete all as specified and directed. Note : - (i) Builders Hardware shall measured and paid separately under respective item of Schedule 'A' . (ii) Only weight of aluminium section shall be measured and paid. No claim what so ever shall be entertained by the Govt on this account. (iii) Thickness of section shall not be more than 2mm.

S&F powder coated aluminium window/ ventilator shutter including necessary jointing cleats, glazing clips, rubber neoprene packing, powder coated aluminium snap beading, stainless steel screws including star locks, roller in case shutter sliding window (Minimum thickmess of power coating shall not be less than 50 micron) complete all as specified and directed.

S&F continuous (piano) brass hinges, width of flaps (when open) 30mm complete all as specified and directed.

S&F for aluminium grills of size exc 5mm x 7.5mm and aperture n. exc 80mm incl fixing with aluminium hannel 1mm thick with steel screw and tint match with existing complete all as specified.

M&L for complete removal of existing treatmentof old decorated wall surface and applying a thin layer of wall care putty to obtain desired/ true surfaces of wall including applying a coat of primer complete all as specified and directed.

M & L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.

M&L for applying two coats of exterior emulsion paint (Apex from Asian Paint or equivalent in Berger paint/ Shalimar Paint) complete all as specified and directed.

M&L for providing and injecting chemical emulsion for Post Constructional Anti-termite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.50 Litre per Sqm of the vertical surfaces of the substructure to a depth of 300 mm including excavating channel along the wall and rodding etc complete all as specified and directed.

M&L for ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 Litre per linear meter including drilling and plugging holes etc in apron complete all as specified and directed.

Taking down carefully existing unserviceable aluminum point wiring of any description & in any position with and including pvc/steel conduit all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings call bell, lamp holders etc and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as directed. NOTE: Old fittings/fixtures/accessories like switch, sockets, lamp holders, regulators etc found in serviceable condition shall be removed carefully for reuse in the work and shall be paid for separately under appropriate item of Schedule `A’.

Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor cable FR, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed PVC conduit (Medium grade) of suitable size not less then 20mm dia all as directed with using new sunken type pressed steel box/terminal boxes of suitable size, 2mm thick duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/junction boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor cable FR single core. PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed.

NOTE : (i) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing colour of surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs and provision of 8covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable GI screws and cup washers) (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of BOQ (Make of Cable/wire:- : Havells /Finolex/Polycab Make of PVC Conduit:-Finolex/Ess Ess Kay Engineering, Make of Laminated Sheet:-/Hylam/National)

All as per item No 13 hereinbefore but point wiring for 5 pin switch socket outlet combination, 5/6 Amps on independent board.

All as per item No 13 hereinbefore but point wiring for one 5 pin socket outlet, on same board .

M & L for switch flush type single pole one way 5 Amps, 240 volts, white ivory finish complete all as specified. (Make :- Anchor(Panta)/ Cona/ Leader)

M&L for lamp holder insulated body with back plate for batten fitting complete all as specified. (Make :- Anchor(Panta) , Cona , Leader)

M&L for socket outlet 2 in 1, 5 pin, 6 Amps flush type white ivory finish complete all as specified. (Make :- Anchor(Panta) , Cona , Leader)

S&F for switch socket combination multi purpose, 5 Pin 6 amps, flush typeWith Indicator complete all as specified and directed.Make:-Cat part No 2216 of cona or equivalent of Leader/ Anchor(Panta).

M&L for ceiling rose surface Bakelite three terminal, 18 x 50 mm complete all as specified. (Make :- Anchor(Panta) , Cona , Leader)

S&F for step type electronic fan regulator single phase ,230 volt, 100/120 watt . Complete all as specified. (Size of PT switch ) Make:-Cat part No 3211 of cona or equivalent of Leader/ Anchor(Panta).

Supplying & fixing Endura Linear NEO surface and wall mounted LED tube light fitting 01 x 20 watt with lighting fixture of size 1200x108x62mm with extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver ready to use pack with all accessories including 01 No 20 watt tube rod and connecting the same to ceiling rose with using copper conductor 24/0.020 flexible PVC sheathed and insulated three core copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to walls/roof surface complete all as specified & directed. Make : Havells Cat part No ENDURALINEARNEOBS20WLED840SPCWH or equivalent of make - Philips/Wipro

S&F decorative oval bulk head edge-lit LED fitting 10 watt energy saving, environmental friendly, ultra modern, surface mounted new generation IP 65 luminaire complete with lamp all as specified and directed. Make : - Havells Cat part No RUGBYNEONFT10WLED860SSYMTOPC or equivelent CG/Wipro/C&S

S& F for Street light fittings 1x15watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP65 roadway luminaire with high power LED as light source with acrylic cover suitable for pole dia O 40mm(Max) with complete (40 mm GI pipe light grade ),clamp,nut-bolt and washer. Complete all as specified. ( Make : Havells Cat part No - ENDURAPEARLSL15WLED757SASYTOPC / Philips/Wipro)

Dismaintling & Taking out MCB DBs any size , any type and capacity and remove materials from site of works. Complete all as directed.

S&F for sheet metal enclosure Double door for DB’s 8 way 240 volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires. Complete all as specified. (Make;ABB,Schneider,Legrand)

Dismaintling & Taking out MCBs and isolator sany size , any type and capacity and remove materials from site of works. Complete all as directed.

S&F for MCB single pole 6 to 30 Amps, "C" Curve ,240 Volts complete all as specified (Make:Legrand/ABB/Schneider )

S&F for MCB Single pole and neutral 32 Amps 10 KA, 'C' series, 240 Volts complete all as specified. (Make:Legrand/ABB/Schneider )

GWALIOR TRADE LINK

M/s Khan Construction