Imaging Equipments & Cardio Pulmonary equipments for Kampli new 100Beds Taluka Hospital, Ballari District under 2515-KKRDB (Macro projects) for the year 2024-25

PUBLIC WORKS DEPARTMENT

ESTIMATE FOR IMAGING EQUIPMENTS & CARDIO PULMONARY EQUIPMENTS FOR KAMPLI NEW 100 BEDS TALUKA HOSPITAL

ESTIMATED COST Rs. #REF! LAKHS

GOVERNMENT OF KARNATAKA

(PUBLIC WORKS DEPARTMENT)

FORM P.W.D.62 PARAGRAPH: 13 (A0 OF THE KARNATAKA PUBLIC WORKS DEPARTMENT CODE

ESTIMATE FOR IMAGING EQUIPMENTS & CARDIO PULMONARY EQUIPMENTS FOR KAMPLI NEW 100 BEDS TALUKA HOSPITAL

DIVISION P.W.D. BALLARI

SANCTIONED ESTIMATE NO. No. DATE

DEPARTMENTAL HEAD

ESTIMATE FRAMED IN THE OFFICE OF THE ASSISTANT EXECUTIVE ENGINEER, PWD, SUB-DIVISION, BALLARI.

ADMINISTRATIVELY APPROVED UNDER GO No. Date

TECHNICALLY SANCTIONED NO. DATE

ESTIMATE PREPARED BY SRI ANAND, A.E.

AND CHECKED BY (CALL OR AUTHORITY) SRI G. BASAVA REDDY ASSISTANT EXECUTIVE ENGINEER, PWD, SUB-DIVISION, BALLARI.

ESTIMATE FOR IMAGING EQUIPMENTS & CARDIO PULMONARY EQUIPMENTS FOR KAMPLI NEW 100 BEDS TALUKA HOSPITAL

Certified that, I have personally visited the spot and prepared the estimate using the sanctioned schedule of rates and providing for the most economical and safe way of executing the work.

Certified that the provisions made in the estimate are not covered in any other estimate. I have personally investigated the quarries for materials like sand, murram and stone etc., required for the above said work and found that the distance shown in the plan are the nearest one.

Section Officer. Asst.Executive Engineer,

PWD, Sub Division, Ballari

zÀÈrüÃPÀgÀt ¥ÀvÀæ

ESTIMATE FOR IMAGING EQUIPMENTS & CARDIO PULMONARY EQUIPMENTS FOR KAMPLI NEW 100 BEDS TALUKA HOSPITAL

1) ¥Àæ¸ÁÛ¦vÀ PÁªÀÄUÁjUÁV d«ÄãÀÄ/¸ÀܼÀUÀ¼À ®¨sÀå«zÉ ºÁUÀÆ AiÀiÁªÀÅzÉà MvÀÄÛªÀj EgÀĪÀÅ¢®è ªÀÄvÀÄÛ £ÁåAiÀiÁ®AiÀÄzÀ°è ºÁUÀÆ ¸ÁªÀðd¤PÀªÁV AiÀiÁªÀÅzÉà vÀPÀgÁgÀÄ EgÀĪÀÅ¢®èªÉAzÀÄ zÀÈrüPÀj¸À¯ÁVzÉ.

2) ¥Àæ¸ÁÛ¦vÀ PÁªÀÄUÁjAiÀÄÄ F »AzÉ PÉ.PÉ.Dgï.r.©. ºÁUÀÆ EvÀgÉ AiÀiÁªÀÅzÉà AiÉÆÃd£É CrAiÀÄ°è vÉUÉzÀÄPÉÆArgÀĪÀÅ¢®èªÉAzÀÄ zÀÈrüPÀj¸À¯ÁVzÉ.

±ÁSÁ¢üPÁj ¸ÀºÁAiÀÄPÀ PÁAiÀÄð¤ªÁðºÀPÀ C©üAiÀÄAvÀgÀgÀÄ

¯ÉÆÃPÉÆÃ¥ÀAiÉÆÃV E¯ÁSÉ, G¥À «¨sÁUÀ, §¼Áîj.

PÉ.PÉ.Dgï.r.©. PÁªÀÄUÁjUÀ¼À CAzÁdÄ ¥ÀnÖAiÀÄ£ÀÄß ¸À°è¸ÀĪÀ §UÉÎ ZÉPï°¸ïÖ

ESTIMATE FOR IMAGING EQUIPMENTS & CARDIO PULMONARY EQUIPMENTS FOR KAMPLI NEW 100 BEDS TALUKA HOSPITAL

¯ÉPÀÌ ²Ã¶ðPÉ: 2515 PÉ.PÉ.Dgï.r.©. C£ÀĪÉÆâvÀ QæAiÀiÁ AiÉÆÃd£ÉAiÀÄAvÉ PÀæ.¸ÀA.:

PÀæ.¸ÀA. «ªÀgÀUÀ¼ÀÄ CAzÁdÄ ¥ÀwæPÉAiÉÆA¢UÉ ¸À°è¸À¯ÁVzÉAiÉÄà JA§ §UÉÎ «ªÀgÀUÀ¼ÀÄ (ºËzÀÄ/E®è)

1 ¥Àæ¸ÁÛ¦vÀ PÁªÀÄUÁjUÀ½UÉ ¸ÀPÁðj d«ÄãÀÄ/¤ªÉñÀ£À GvÀÄÛªÀj, AiÀiÁªÀÅzÉà vÀPÀgÁgÀÄ E®è¢gÀĪÀ zÀÈrüPÀgÀt ¥ÀvÀæ ®UÀwÛ¸À¯ÁVzÉAiÉÄÃ? ºËzÀÄ, ®UÀwÛ¸À¯ÁVzÉ.

2 F »AzÉ PÉÊUÉÆArgÀĪÀ AiÀiÁªÀÅzÉà AiÉÆÃd£ÉAiÀÄ°è F PÁªÀÄUÁjUÀ¼À£ÀÄß PÉÊUÉÆArgÀzÉà EgÀĪÀ §UÉÎ zÀÈrüPÀgÀt ¥ÀvÀæ ®UÀwÛ¸À¯ÁVzÉAiÉÄÃ? ºËzÀÄ, ®UÀwÛ¸À¯ÁVzÉ.

3 J¸ï.¹.¦./n.J¸ï.¦. PÁªÀÄUÁjUÀ½zÀÝ°è, ¸ÀªÀiÁd PÀ¯Áåt E¯ÁSÉAiÀÄ ¥ÀæªÀiÁt ¥ÀvÀæªÀ£ÀÄß ®UÀwÛ¸À¯ÁVzÉAiÉÄÃ? C£Àé¬Ä¸ÀĪÀÅ¢®è.

4 PÀlÖqÀ / gÀ¸ÉÛ / ¸ÉÃvÀÄªÉ PÁªÀÄUÁjUÀ½UÉ ¸ÀA§A¢ü¹zÀAvÉ, QæAiÀiÁ AiÉÆÃd£ÉAiÀÄ°è C£ÀĪÉÆÃzÀ£ÉAiÀiÁVgÀĪÀ C¼ÀvÉUÀ½UÉ vÁ¼ÉÉAiÀiÁUÀÄvÀÛzÉAiÉÄÃ?

5 vÁAwæPÀ PÁAiÀÄðPÁÌV £ÉëĸÀ®ànÖgÀĪÀ ªÀÄÆgÀ£ÉÃAiÀÄ vÀAqÀªÀzÀgÀ ¥ÁªÀwUÁV CAzÁdÄ ¥ÀnÖAiÀÄ°è 1% CªÀPÁ±ÀUÀ¼À£ÀÄß PÀ°à¸À¯ÁVzÉAiÉÄÃ? ºËzÀÄ, PÀ°à¸À¯ÁVzÉ.

6 CAzÁdÄ ¥ÀnÖAiÀÄ°è £ÁªÀÄ¥sÀ®PÀUÀ½UÉ CªÀPÁ±ÀUÀ¼À£ÀÄß PÀ°à¸À¯ÁVzÉAiÉÄÃ? ºËzÀÄ, PÀ°à¸À¯ÁVzÉ.

7 CAzÁdÄ ¥ÀnÖAiÀÉÆA¢UÉ F PɼÀPÁt¹zÀ zÁR¯ÉUÀ¼À£ÀÄß ®UÀwÛ¸À¯ÁVzÉAiÉÄÃ? C) ªÀÄÄR¥ÀÄl D) ªÀgÀ¢ E) £ÀPÉëUÀ¼ÀÄ F) «£Áå¸ÀzÀ «ªÀgÀUÀ¼ÀÄ ºËzÀÄ, ®UÀwÛ¸À¯ÁVzÉ.

8 DqÀ½vÁvÀäPÀ C£ÀĪÉÆÃzÀ£É ¥ÀvÀæªÀ£ÀÄß ®UÀwÛ¸À¯ÁVzÉAiÉÄÃ? CAzÁdÄ ¥ÀwæPÉAiÀÄ£ÀÄß DqÀ½vÁvÀäPÀ C£ÀĪÉÆÃzÀ£ÉUÁV ¸À°è¸À¯ÁVzÉ.

9 ªÀiÁvÀÈ E¯ÁSɬÄAzÀ PÁªÀÄUÁjUÁV ¸ÉÊmï£ÀÄß F E¯ÁSÉUÉ ¸ÀA§A¢ü¹zÀªÀjAzÀ ºÀ¸ÁÛAvÀgÀªÀ£ÀÄß ¥ÀqÉAiÀįÁVzÉAiÉÄÃ?

10 FVgÀĪÀAvÉ, PÉ®¸ÀPÉÌ ªÀÄÄAZÉ bÁAiÀiÁavÀæUÀ¼À£ÀÄß ®UÀwÛ¸À¯ÁVzÉAiÉÄÃ? ºËzÀÄ, ®UÀwÛ¸À¯ÁVzÉ.

11 CAzÁdÄ ¥ÀnÖAiÀÄ°è QæAiÀiÁ AiÉÆÃd£ÉAiÀÄ°ègÀĪÀAvÉ DyðPÀ ªÀµÀðªÁgÀÄ C£ÀÄzÁ£ÀªÀ£ÀÄß £ÀªÀÄÆ¢¸À¯ÁVzÉAiÉÄÃ? ºËzÀÄ, £ÀªÀÄÆ¢¸À¯ÁVzÉ.

±ÁSÁ¢üPÁj ¸ÀºÁAiÀÄPÀ PÁAiÀÄð¤ªÁðºÀPÀ C©üAiÀÄAvÀgÀgÀÄ ¯ÉÆÃPÉÆÃ¥ÀAiÉÆÃV E¯ÁSÉ, G¥À «¨sÁUÀ, §¼Áîj.

PÁAiÀÄð¤ªÁðºÀPÀ C©üAiÀÄAvÀgÀgÀÄ ¯ÉÆÃPÉÆÃ¥ÀAiÉÆÃV E¯ÁSÉ, «¨sÁUÀ, §¼Áîj.

ESTIMATE FOR IMAGING EQUIPMENTS & CARDIO PULMONARY EQUIPMENTS FOR KAMPLI NEW 100 BEDS TALUKA HOSPITAL

SL. No. Description Unit No. L B D Qty. Rate Amount

1 DR 300 -320M.A.X-ray machine.DIGITAL Xray 300mA-320mA with accessories Technical Specification (300-320 mA X Ray machine) The Portable X-Ray Machine should be a mobile, processor-based X-ray unit 320 mA AERB Approved. It must be equipped with a high-frequency X-ray generator with a minimum power output of 32KW at 100kV or higher. The kV range should be from 40 to 125 kV, adjustable in 1 kV steps or finer. The mA range should be 320 mA A digital display must be provided to show all the set parameters clearly and display screen size should not be more than 8 inch. The unit should include a rotating anode X-ray tube with either a dual focus or single focus (0.8/1.3 mm or better). The anode heat storage capacity should be at least 107 KHU or higher. The machine must support APR (Anatomical Programmed Radiography) techniques with storage capacity for 30 or more exam protocols. It should have an electronic timer capable of achieving a minimum exposure time of 1 millisecond or less. A chest stand and Table must be included. The unit should come with an X-ray hand switch and an extendable cable. The power supply requirement is 220 V, 40 Hz. (single phase ) X Ray machine must have AERB, BIS, CDSCO Approved EPR Electronic and Plastic waste certificate must be attached. Flat Panel Detector (FPD with TFT technology Single Wireless Flat Panel Detector system (FPD) of Size 17”x17” or more should be offered. The Scintillator material of the detectors should be made up of Cesium Iodide and sensor with Thin Film Transistor (TFT) and Amorphous Silicon technology. The detector should be maximum protected from dust and liquid. The Ingress protection rating must be IP68 or better The detectors should be capable of doing out of bucky radiography and Lateral supine Radiography must be possible. The detectors offered should have on board memory capable of storing up to 1000 images. The detectors should have a minimum spatial resolution of 3.4 lp /mm or more. Detector array Size: Should be a minimum of 2.3K x 2.8K pixels or higher. Pixel Pitch: 140 microns. A to D conversion: 16 bits. The detector offered should be light in weight with less than 4.5 kgs, enabling ease of use for operations and easy positioning at the time of out of bucky exposures. Images pre-viewing should be available within 5 secs after exposure and the cycle time should be less than 12 seconds. The battery must be of latest Lithium-Ion type. 2 Nos Batteries along with battery charger should be provided. Detector offered should be capable of handling 500 or more exposures or 6 hours of operation in single full charge. The detectors should have Automatic Exposure Detection as standard feature. The detector should be able to work at normal room temperature and humidity. The detector system should not require frequent calibrations on daily start-up. Offered detector should have load bearing capacity of 150 kgs or more. The long length imaging should be possible Image Processing Console cum workstation: The DR Console should be offered with PC along with high resolution monitor of size 17” or more. Should be with 8GB RAM and 1 TBB HDD storage and should have veterinary application Window and Level Adjustments Annotations must be possible Previews of images should be available in about 5 Sec or less Zooming, ROI, Image Cropping and grid removal function should be available. Soft tissue processing must be possible. Should offer capability of local image storage. Should be capable of connecting minimum of 2 Flat panels simultaneously. Should be capable of connecting directly to the Dry Laser printer. Should have capability to push images to location(s) of choice such as: a) Workstations b) PACS c) External Storage Devices d) DICOM Printer(s)

Basic Amount 4431900.00 Total Quantity Basic Amount 4431900.00

GST 5% 221595.00 Total Quantity GST Amount 221595.00

Quotation Rate 4653495.00

2 70M.A-100 M.A.X-RAY MACHINE(MOBILE), X-Ray Generator: The system shall be a highly portable, compact, lightweight mobile X-ray unit designed for easy manoeuvrability. The system shall provide a user-friendly digital interface, supporting operation on AC mains (180–260 V). The X-ray generator shall be high-frequency type, operating at >100 kHz. Output capability shall be 70 mA at a minimum of 2.8 kW. Maximum output shall support 100 mAs or more. kV range shall be 40–100 kV, selectable in 1 kV steps. The X-ray tube shall be stationary anode, with focal spot size 1.8 mm or less. APR (Automatic Programmable Radiography) must be available. System shall support corded/wireless exposure control using suitable remote. B. Generator & control system The generator shall be high-frequency inverter type >100 kHz. Control system shall be microcontroller-based closed-loop for consistent output. Exposure time shall range from 0.01 s to 2.0 s. Exposure control shall be possible through control panel and wired/wireless remote. C. X-ray tube & collimator Tube insert shall be stationary anode type. Focal spot size shall be 1.8 mm or lesser. Leakage radiation must be compliant with AERB standards. Collimator shall be manual, equipped with LED light guide and laser alignment. D. Flat Panel Detector (FPD) FPD shall be wireless portable, digital, supporting both Wi-Fi and wired communication. Active image area shall be 40 × 35 cm or larger. Detector shall provide minimum resolution of 7.5 megapixels. Pixel size shall be 140 microns or better. Scintillator shall be direct deposited CsI. Pixel matrix shall be 3070 × 2450 or higher. A/D conversion shall be 16-bit or higher. Detector Quantum Efficiency (DQE) shall be ≥65% @0 lp/mm or ≥73% @1 lp/mm. Detector shall support Automatic Exposure Detection (AED) and manual modes. E. Digital image acquisition workstation Workstation shall feature a 19-inch or larger diagnostic color monitor with touchscreen. Workstation must receive images from wireless FPD with image preview ≤ 5 seconds. Compatible laptop with storage capacity ≥500 GB, with RAM ≥8 GB. At least 2 USB ports shall be provided. Keyboard, mouse, and functional controls shall be supplied. All required interface cards/adapters for detector communication must be provided. Workstation must support minimum two detectors. System must support three network nodes or higher. Full DICOM support must be included: DICOM Print/store, DICOM send to PACS. Image processing suite shall include: Annotation, magnification, rotation, zoom, roam, flip, crop; Virtual shutters, contrast adjustment, edge enhancement; Noise reduction, smoothing; Grid detection & suppression; Tissue equalization & smart windowing with artifact minimization. F. Electrical & safety features, certifications, and accessories The complete unit shall operate on single-phase power, suitable for 210–250 V, 15 A. Product shall be certified by any one of the following: BIS/CDSCO & AERB approval/compliance. Manufacturer shall be ISO 13485 and ISO 9001 certification for quality standards. Lead appron System shall provide overload, over-voltage, and over-mA protection. User, technical, and maintenance manuals shall be supplied in English. Must provide comprehensive training/demonstration during installation. Breakdown response time shall be ≤48 hours. Warranty: 3 years onsite warranty for both X-ray unit and detector.

Basic Amount 1032240.00 Total Quantity Basic Amount 1032240.00

GST 12% 51612.00 Total Quantity GST Amount 51612.00

Quotation Rate 1083852.00

3 DENTAL X-RAY MACHINE, GENERAL Product Name Dental X-Ray Machine PRODUCT INFORMATION Tube voltage (KV) 70KV Tube current (mA) 2 mA Focal spot (mm) 0.4 Should have Total filtration and Inherent Filtration Yes Total filtration in mm Al ≥ 2 mm Al Inherent filtration ≥ 0.5 mm Al Minimum Exposure Time 0.04 to 2 seconds Power supply 220-240 V, 50 Hz single phase Based on DC Current Yes RVG / X Ray Film compatible Yes Machine should have a stable base with sturdy locking wheel mechanism No Wall Mountable No Digital control equipped with an easy ready display indicating with precision Yes Stool for the patient provided No Soft positioning arms for accurate tube positions Yes Light and flexible movements Yes Internally lead coated head tube and cone to avoid scattered radiations Yes Exclusive angular indicating system for head positioning in various radiography techniques Yes High efficiency and greater sharpness of the radiography Yes Additional Parameters Should have high voltage generator with high efficiency in the emission of the X rays Yes Should have free swivel head, which allows easy positioning of head Yes Number of lead aprons provided 2 (0.5 mm lead equivalent) To be supplied with Thyroid shield Yes CERTIFICATION AND REPORTS Compliance to Medical Device Rules (MDR) 2017 as amended till date Yes Availability of valid drug license for the product issued from the competent authority defined under Drugs and Cosmetic Act 1940 and Rules made there under as amended till date Yes AERB Type Approved Model Yes Battery and Adapter must be BIS Approved yes Conformity to Indian Standard IS 7620- Part 1, Part 2, Part 3 Yes Manufacturing unit certification and NABL Certificate YES EPR Electronic and plastic waste certificate yes Availability of Test Report for product as per Medical Device Rules (MDR) 2017 as amended till date Yes Electrical Safety Standards IEC/EN 60601-1 or equivalent BIS Standard Submission of all necessary certifications, licenses and test reports to the buyer at the time of bid submission and/or along with supplies as per buyer requirement Yes WARRANTY Warranty (Option of comprehensive warranty is available through bidding only, which if opted will supersede normal warranty in the catalogue) 3year

Basic Amount 953700.00 Total Quantity Basic Amount 953700.00

GST 5% 47685.00 Total Quantity GST Amount 47685.00

Quotation Rate 1001385.00

4 ECHOCARDIOGRAM /2D3D/4D, Description of Function 1.1 Colour Doppler Echocardiography System is required to study the anatomical abnormalities and blood flow in the heart and associated vessels. 2 Operational Requirements 2.1 Latest generation Electronic Phased array Colour Doppler system with Minimum 50,000 digital processing channels with LIVE 3D imaging. System should be DICOM ready and capable of being interfaced with HIS/RIS/PACS. 2.2 Should be field up gradable to next generation system on site. All new software should be upgraded free of cost for at least 7 years 2.3 Frequency compounding or better technology for better resolution and penetration. 3 Technical Specifications 3.1 Latest generation Electronic Phased array Colour Doppler system with Minimum 50,000 digital processing channels with LIVE 3D imaging. 3.2 256 grey shades for sharp contrast resolutions 3.3 Adult & Paediatric Trans thoracic Cardiac, TEE (Adult & Paediatric) and Vascular Probes to be supplied which should belatest generation wide band transducers. 3.4 Harmonic Imaging- System should have following modes in harmonic with separate setting for: a. Tissue Harmonic. b. Contrast Harmonic c. Harmonic Angio. d. Quantification of harmonics imaging 3.5 Harmonic imaging capability in Adult Cardiac, Paediatric Cardiac and linear Probe 3.6 Gain control in two dimensions for additional level of flexibility to image quality control. 3.7 Real time high frequency 2D for higher resolution and low frequency Doppler for higher sensitivity in all probes. 3.8 Frame rate should be 300 FPS or more 3.9 Steerable PW/CW in all Phased Array probes. 3.10 High-definition acoustic zoom for enlarging sections of 2D and Colour flow images with more acoustic information for greater clarity and detail while maintaining an optimal frame rate. 3.11 Modes - 3D, 2D, M-Mode, Steerable PW/CW Doppler, Colour Doppler and High Definition Colour flow. 3.12 Monitor should be 15" or more, high-resolution colour Monitor. Tilt and Swivel monitor should be able to view in all angles and all light conditions. 3.13 Colour Flow Imaging for : a. Increased lateral & spatial resolution. b. Detection of even subtle areas of turbulence, displaying a more physiological blood flow appearance without loss of frame rate. c. Colour flow with capability of automatically picking up colour flow as a function of focal depth 3.14 Tissue Colorization (B-Colour) for improved contrast resolution 3.15 Application software for Adult, Paediatric, Foetal and Peripheral Vascular and Trans oesophagal applications. (All application packages should be built into the system) 3.16 Cine loop memory- more than 120MB of memory or equivalent cineloop memory in frames/sec. a. High Frame rate review for better clarity of playback images study in slow motion. b. Quad loop with memory for pre and post image comparison of any procedure. c. Memory- 256 frames or more in quad loop. M Mode & Doppler Scroll Memory-40 seconds or more. d. Frame grabber facility for post analysis. 3.17 Various maps for pre and post processing. 3.18 ECG trigger facility. 3.19 User defined system and application presets for multi-user department. 3.20 DVD/CD writer or flash memory and USB connector 3.21 Dedicated integrated dynamic stress echo package for flexible user defined protocols with stacked sub loops facility and contrast stress protocol usable for stress echocardiography.

Basic Amount 2748900.00 Total Quantity Basic Amount 2748900.00

GST 12% 329868.00 Total Quantity GST Amount 329868.00

Quotation Rate 3078768.00

5 ECG MACHINE 3 CHANNEL. Electrocardiographs,multichanne Continuouslydetect,measureanddisplayapatientsechocardiogram (ECG) through leads and sensors attached to the patient Simultaneous3ChannelECGrecordingwith12lead simultaneous acquisition. Shouldhaveadigitaldisplayof3channelECGandshould have three modes (Automatic, Manual and rhythm). Heartratemeasurementrangetobeatleast30bpmto250 bpm, with accuracy better than ± 5bpm. Heartratetrenddisplayofatleastprevious24hours. Arrhythmiadetectionfacilityrequired;minimumgradationof1 bpm.<60dB Shouldmaintainnominaltemperatureandtheheatshouldbe disbursed through a cooling mechanism 220V±10%,50Hz Batterypowered,silenceablealarmforpowerfailure. Batterychargertobeintegraltomainspowersupply,andtocharge battery during mains power operation of unit. Internal,replaceable,rechargeablebatteryallowsoperationforat least one hour in the event of power failure.3leadECG cable. 100setsofECGconnectionelectrodes(ifdisposabletype). 5 sets of ECG connection electrodes (if reusable type)Capableofoperatingcontinuouslyinambienttemperatureof-10to 60 deg C and relative humidity of upto 90% in ideal circumstances ShouldbeCDSCO approved. ShouldcomplywithBISstandards. ShouldcomplywithUSFDA/EuropeanCEstandardsincaseof non-availability of BIS standards. ShouldconformtoISO13485qualitystandards. ShouldconformtoIEC60601-1Generalrequirementsofelectrical safetystandards 03 years PreventiveMaintenancevisitsatleastonceineachquarterShouldprovide2sets(hardcopy)of:- User,technical,maintenanceandservicemanualsshould besuppliedinEnglish/Hindi/Regionallanguagealongwith machine diagrams. Listofequipmentandproceduresrequiredforloca

Basic Amount 89760.00 Total Quantity Basic Amount 89760.00

GST 5% 4488.00 Total Quantity GST Amount 4488.00

Quotation Rate 94248.00

6 CARDIAC MONITOR.Mult ichannel ECG measurement and selectable display of upto 5 leads at a time. Temperature probe to be reusable, external skin contact type. Temperature range at least 30 to 40 deg C, minimum gradation 0.1 deg C. Heartratemeasurementrangetobeatleast30to 250 bpm, with accuracy better than ± 5 bpm and minimum gradation 1 bpm. SpO2 measurement range at least 40-70% and 70 to99%,withaccuracybetterthan±1%for40-70range and better than ± 3% for 70-99 range and minimum gradation 1%. Blood pressure monitoring range at least 30 to 300 mmHg, minimum gradation 1 mmHg. Respirationratemeasurementrangeatleast0to100 bpm, minimum gradation 1 bpm. Trend display of each parameter over at least previous 24 hours to be selectable. LCDscreenfordisplayingallparameters. AudioVisualalarmsrequired:highandlowlevelsfor each parameter (operator variable settings), sensor / wire / probe disconnected, low battery. 5 para monitor Should comply with BIS standards. ShouldconformtoISO13485quality standards. ,technicalandmaintenancemanualsshould be supplied in English/Hindi language along with machine diagrams. Serviceandoperationmanuals(originalandCopy) to be provided. Satisfactorycertificateforanyexistinginstallation from government hospital

Basic Amount 106814.40 Total Quantity Basic Amount 427257.60

GST 5% 53407.20 Total Quantity GST Amount 213628.80

Quotation Rate 160221.60

7 CARDIAC MONITOR WITH DEFIBRILLATOR.Manualorautomaticdefibrillatorwiththefacilityforapplying transcutaneous pacing (TCP), usually done by giving electrical stimulus to the heart (delivering pulses of electric currentthroughthepatientchest)whichstimulatestheheart tocontract.Emergency/ICU/Cardiaccar Defibrillatorshouldbeeasytouse,havingfacilityforAED (Automated External Defibrillation) and Manual mode defibrillation based on Biphasic technology. It should be able to deliver shock from 1 J to 200 Joules (ormore)inManualModeandautomaticmodeforpediatric & adult patients. Itshouldhaveatleast5LeadECGMonitoring. ShouldhaveCPRMetronomeduringAEDMode operation. Itshouldhave7inch(ormore)diagonalcolorLCD/LED screen facility to view color mode display. Should work onA.C.and D.C.and onlatestrechargeable Lithium-Ion batteries with fully charged Battery capacity to monitor minimum 2hours of operation and100(±20)shocks of 200 Joules discharges. Should have in-builtprinter/recorder. 8ShouldhavevitalsignmonitoringofSpO2,NIBP. 9.Shouldhavefacilityforexternalpacemaker(withDemand and Fixed/Non demand mode) and Synchronous Cardioversion.220+/-10%VAC, 50Hz Rechargeable battery backup of minimum02hours Reusable Hard Paddels-1Set MultipurposeElectrode(AEDcumPacingPads)-3No.s Adult and 2 No.s PediatricPads SpO2 Probe-1Adult & 1 PediatricNIBPHose&Cuff1Adult&1Pediatric Capableofoperatingcontinuouslyinambienttemperatureof -10to60degCandrelativehumidityofupto90%inideal circumstancesShouldbeCDSCO approved. ShouldcomplywithBISstandards. .03 years Preventive Maintenance visits atleas tonce in each quarter User,technical and maintenance manuals to be supplied in English/Hindi language along with machine diagrams.

Basic Amount 504900.00 Total Quantity Basic Amount 1009800.00

GST 5% 25245.00 Total Quantity GST Amount 50490.00

Quotation Rate 530145.00

8 VENTILATORS (ADULT). Mechanicalventilatorsarelifesupportdevicesthatmovegas(e.g., airand/oroxygen)toandfromapatient'slungs.Thesedevicesmay providetemporaryorpermanentrespirationforpatientswhocannot breathe on their own, or who require assistance maintaining adequate ventilation. It can be used in two modes Invasive (Tube Inside trachea) and Non invasive (through face mask/nasal tube) ventilation.ShouldhavefacilityforInvasiveandNon-Invasiveventilation. MicroprocessorControlsuitableforPediatricandadultventilation. ElectromagneticCompatibleHingedarmholderforholdingthe circuit. 4.ShouldhavebuiltintouchcolourscreenTFTdisplayofminimum 10”ormorefordisplayofwaveformsandMonitoredvalue. 5.ShouldhaveinbuiltfacilitytoupgradewithEtcO2. 6.FacilitytoMeasureanddisplay:- a)Statusindicatorforventilatormode. b)Batteryindication. c)PressureVstimeVsvolumeVstime,flowVstime3curves/ waveforms. d)Alarmsetting. 7.Automaticcomplianceandleakagecompensationforcircuit and ETTube. 8.Shouldhavefacilityoflogbook,foreventsandalarmswithdate& time. 9.Shouldhavefollowingsettings. a)Tidalvolume(Minimumatleast50ml,Maximumupto2000ml) b)InspiratoryPressure(upto80cmofH20) Respiratoryrate1to80bpm. Apnoeabackup rate. CPAP/PEEP Pressuresupport. Fi02 PauseTime Pressure&flowTrigger Inspiratoryflowupto120Lpm. MonitoringandDisplayofthefollowingParameters. AirwayPressure(Peak&Mean). Tidalvolume(Inspired&Expired).

Basic Amount 2199120.00 Total Quantity Basic Amount 2199120.00

GST 5% 109956.00 Total Quantity GST Amount 109956.00

Quotation Rate 2309076.00

9 VENTILATORS (PAEDIATRICS/UNIVERSAL). Ventilators (Paediatrics) 1. Use 1.1 clinical purpose To provide automated, alveolar ventilatory support for patients in emergency situations. 2 Used by clinical department/ ward Emergency /Critical Care (NICU/PICU) techNical 2. techNical characteristics 2.1 technical characteristics (specific to this type of device) 1) Should have facility for Invasive and Non-Invasive ventilation; 2) Microprocessor Control suitable for Neonatal and Pediatric ventilation; 3) Should have modes of ventilation equipped with newer modes of ventilation: 3 .1) Assist/ Control 3.2) Volume control 3.3) Pressure control 3.4) Pressure support 3.5) SIMV with pressure support (Pressure and volime control) . 3.6) PEEP 3.7) Inverse ratio Ventilation 3.8) Non invasive ventilation-BIPAP, CPAP 3.9) Apnea ventilation, user selectable, volume & pressure control; 4) Should have built in color screen TFT/LCD display of minimum 8” for display of waveforms and monitored value; 5) Should have inbuilt facility to upgrade with EtcO2; 6) Should have facility to measure and display of the following parameters: 6.1) Airway Pressure (Peak & Mean) 6.2) Tidal volume (Inspired & Expired) 6.3) Minute volume (Inspired & Expired) 6.4) Respiratory mechanics 6.5) Spontaneous Minute Volume 6.6) Total Frequency 6.7) FiO2 dynamic 6.8) Intrinsic PEEP 6.9) Plateau Pressure 6.10)Resistance& Compliance 6.11)Use selector Alarms for all measured & monitored parameters 6.12)Occlusion Pressure 6.13)Pressure Flow & Volume curves; 7) Automatic compliance and leakage compensation for circuit and ET tube;

Basic Amount 2805000.00 Total Quantity Basic Amount 2805000.00

GST 5% 140250.00 Total Quantity GST Amount 140250.00

Quotation Rate 2945250.00

10 PULSE OXIMETER 3 PARA. Itisusedforthetranscutaneousmeasurementanddisplay ofhaemoglobinoxygensaturation(SpO2).Thesignalsare produced by light-emitting diodes (LEDs) and received by aphotodetector.ThedevicedisplaystheSpO2valuesand may also measure and display pulse rate. Shouldbeaportable,lightweight,desktopmodelwith adult, pediatric and neonatal finger probes. Should have digital display with parameters: SpO2, pulserate,plethysmographwaveform,alarmmessage and battery state indication. SpO2detectionrangetoinclude:70–100% SpO2resolution:1%orless AccuracyofSpO2shouldbewithin+/-3% SpO2probesshouldbereusable. Pulse rate range detection range to include: 30-240 beats per minute (bpm). Pulserateaccuracy:within±3bpm. Pulserateresolution:1bpmorless Audio and visual alarms required: high and low SpO2 and pulse rate (operator variable settings), sensor disconnected, sensor failure, low battery.Suitablefordetectioninlowperfusionconditions. Shouldhaveaminimumof02hoursback-uptime. Shouldhavetrenddataofatleast36hrs.Digitaldisplayandeasilyaccessiblebuttonsto operate the machine. Lightweight <60dBA Shouldbedispersedthroughexhaust. 220V+/-10%AC,50Hz Yes,withminimumbackuptimeof02hour Tobespecifiedbymanufacturer Tworeusableprobeseachforadult,pediatricandinfant use Capableofoperatingcontinuouslyinambienttemperature of -10 to 60 deg C and relative humidity upto 90%in ideal circumstances. 03 years PreventiveMaintenancevisitsatleastonceineach quarter.Shouldprovide2sets(hardcopyandsoftcopy)of: User,technicalandmaintenancemanualsshould be supplied in English/Hindi language along with machine diagrams. Listofequipmentandproceduresrequiredfor local calibration and routine maintenance.

Basic Amount 21237.22 Total Quantity Basic Amount 148660.54

GST 5% 1061.86 Total Quantity GST Amount 7433.03

Quotation Rate 22299.08

11 INFUSION PUMP. An infusion pump infuses fluids,medicationornutrients into a patient's circulatory system. It is generally used intravenously, although subcutaneous, arterial and epiduralinfusionsareoccasionallyused. Emergency,OperationTheatre,Criticalcare TECHNICAL 2.TECHNICALCHARACTERISTICS Flowrateprogrammablerangeatleastfrom0.1to200 ml/hr, instepsof 0.1ml/hr; and at least from 100to 1200 ml/hr in steps of 1 ml/hr. SaveslastinfusionrateevenwhentheACpoweris switched off. Accuracyof±2%orbetterforset parameters. Maximumpressuregenerated20psi. Pauseinfusionfacilityrequired. Self-checkcarriedoutonpowering on. Comprehensive alarm package required including: occlusionalarm,nearendofinfusionpre-alarmandalarm, volume limit pre-alarm and alarm, low battery pre-alarm and alarm, AC power failure, drive disengaged. Itshouldbeopen system Automatic Inbuilt 220+/-10%VAC, 50Hz Internalrechargeablebatteryhavingaminimumof2hours backup Batterypoweredalarmforpowerfailureordisconnection Asspecifiedbymanufacturer 5.ACCESSORIES,SPAREPARTS,CONSUMABLES ClampformountingpumponIVstand 6.ENVIRONMENTALANDDEPARTMENTALCONSIDERATIONS Capable of operating continuously in ambient temperatureof-10to60degCandrelativehumidityof up to 90%. Easytocleanandmaintain. 7.STANDARDSANDSAFETY ShouldbeCDSCOapproved. ShouldcomplywithBISstandards. ShouldcomplywithUSFDA/EuropeanCEstandards incase of non-availability of BIS standards. ShouldconformtoISO13485quality standards.

Basic Amount 145860.00 Total Quantity Basic Amount 437580.00

GST 5% 7293.00 Total Quantity GST Amount 21879.00

Quotation Rate 153153.00

12 DIGITAL ARM BP APPARATUS. Accuracy 0.03 pressure Cuff Type 32cm Weight 300g Measurement Range (Pressure) 37.30 kPa Usage/Application Personal Pulse Measurement Range 199 Beats Air Pressure Range 860 hPa Measuring Method Oscillometric method Power Source 6V (4 AA batteries) Dimensions L93 xW120 x H59mm LCD Size 54x64mm (LxW)

Basic Amount 2917.20 Total Quantity Basic Amount 23337.60

GST 5% 145.86 Total Quantity GST Amount 1166.88

Quotation Rate 3063.06

13 STETHOSCOPE. Technical Specifications of STETHOSCOPE 1. Patient friendly Non-Chill Rim 2. Solid stainless steel / anodized aluminium chest piece 3. Frame should be stainless steel 4. Excellent Acoustic Diaphragm and comfortably fit with soft sealing ear tips 5. Anatomically correct headset & comfortably angled 6. Single lumen tubing in a variety of popular colours 7. Y PVC tubing 8. Should bear ISI mark/ CE compliant/ FDA approved/ISO

Basic Amount 4200.77 Total Quantity Basic Amount 50409.24

GST 5% 210.04 Total Quantity GST Amount 2520.46

Quotation Rate 4410.81

14 NEBULISER. 1. Should be lightweight, portable and compact. 2. Should have a dust filter. 3. Should be able to deliver a flow rate of 6-8 lpm at operating pressure range 8 to 16 psi. 4. Should have a check valve to protect the device against contamination due to backward inhalation 5. Should be compatible for continuous use – Ultrasonic type 6. Should works on 200-240Vac/50Hz. 7. Should be supplied with nebulization accessory kit with mask for paediatric – 2 nos. each

Basic Amount 2800.51 Total Quantity Basic Amount 28005.10

GST 5% 140.03 Total Quantity GST Amount 1400.26

Quotation Rate 2940.54

15 BABY INCUBATORS. 1. Should confirm to electrical safety standard for medical equipment. 2. Should be a servo controlled incubator with a rise time of not more than 45 minutes and a temperature stability of +/- 0.2° C at steady state. 3. Should have the large baby access doors at both sides. 4. The double wall incubator canopy should be largest at least length 80 cm, width 50 cm, and height 45 cm to accommodate tubing and oxygen hood. 5. Should have four elbow operated access ports. Should also have one iris port for ventilator tubing and easy head access. 6. Should have at least four small ports for IV tube and one big iris port hole for other probe sensor cable. 7. Should be able to tilt the baby bed to 10 ° on either side without opening the canopy/doors of the incubator. 8. The mattress and it’s internal airflow path should be easily disassembled for cleaning 9. The internal of the incubator should be moulded, rounded without any devices for easy cleaning and inhibiting bacterial growth. 10. Should have audio & visual display of alarm conditions. 11. The water level should be visible and should be able to refill water without opening the incubator. 12. Should have two temperature probes for patient skin temperature and auxillary temperature measurement. 13. Baby bed should be withdrawable from both sides. 14. Should have optional in-built baby weighing scale to measure the baby weight without disturbing baby. 15. Unit should be height adjustable. 16. Should have optional oxygen saturation set range from 21 to 60 %. 17. Should have humidity set range from 40 to 90%. 18. Should have trend display facility for temperature, humidity and oxygen 1. Should have provided with X-Ray tray holder. 2. Controller specification: i. Modes of operation : air mode , baby mode (servo mode) ii. Temperature measurement Range : a. Air temperature : 10 -40 °C b. Skin temperature : 20-42°C c. Accuracy : +/-0.2 °C d. Resolution : 0.1 °C e. Interchangeability : +/- 0.1 °C i. Display : should have colour display with control for Air temperature, patient temperature ii. Set temperature a. Should display heater power in digital forms. b. Should have alarm facility for different parameters. i. Temperature control range : a. Air mode : 30 to 39 °C with a provision to override above

Basic Amount 420076.80 Total Quantity Basic Amount 1260230.40

GST 5% 21003.84 Total Quantity GST Amount 65531.98

Quotation Rate 441080.64

16 EMERGENCY RESUSCITATION KIT BABY. Emergency resuscitation kit baby Silicone Resuscitator / ambubag 500ml - Child Miller Laryngoscope with 0 & 1 No. Blades Guedel Airways - 0, 1 & 2 No. Silicone Face Mask - 0 & 1 No. Oxygen Reservoir Bag with Valve Oxygen Tube Foot Suction with Silicone Tube Carry Case. Oxygen 5ltr cylinder Torch LED Standard weighing scale Mobile & User-Friendly Design – Lightweight and easily dismantled for quick transportation and setup anywhere. Stable Construction – Features a Moulded-ABS floor plate, ensuring reliability during every measurement. Accurate Height Measurement – Measuring range of 20 - 205 cm with 1mm graduation, offering precise readings in both inches and centimetres. Easy-to-Read Scale – Clearly marked scale on both sides of the measuring rod for effortless height assessment. digital Weighing Scale Weighing capacity: 130Kg Graduation: 0.5Kg Durable & Portable – Built with high-quality plastic parts for long-lasting performance while remaining lightweight and easy to carry. Easy Assembly & Disassembly – should be Supplied in a knock-down condition with a comprehensive English manual for effortless setup.

Basic Amount 65345.28 Total Quantity Basic Amount 196035.84

GST 5% 3267.26 Total Quantity GST Amount 9801.79

Quotation Rate 68612.54

Basic Total AMount 17,841,936.32

Total Gst ₹892,096.82

Total Inclusive of GST 18,734,033.14 19118722.00 -0.10

Miscellaneous 400,247.50

Section Officer Assistant Executive Engineer

PWD, Sub Division, Ballari.

Imaging Equipments & Cardio Pulmonary equipments for Kampli new 100Beds Taluka Hospital, Ballari District under 2515-KKRDB (Macro projects) for the year 2024-25 (PWD/2025-26/IND0201)

SL. No. Item Code Item Name Unit Scheduled Quantity Unit Price Rs. Amount Rs.

1 Item-1 DR 300 M.A.X-ray machine.DIGITAL Xray 300mA with accessories General The offered Model should be the latest, Static Digital Radiography system suitable for Radiography of all body parts The unit should be a Digital system with Two wired, integrated Flat Panel Detector It should be CE certified / FDA Approved and CDSCO It should have AERB Type Approval All Technical information in the tender document must be supported by original product date sheets Compliance sheets must be strictly under the headings given in the tender document and should be supported by data. Minimum two major components (Tube/ X ray generator/Detector) must be manufactured by manufacturer of Digital Radiography system to ensure optimal functional synchrony and maintenance of the machine. Reference of product brochure and datasheet will be considered as a proof of claim. System should have following specifications as standard: Generator Micro-Processor coontrolled High Frequency X-RAY Generator Invertor frequency: 30kHz or more Output Power of generator :32 KW or more Radiographic KV Range: 40 to 125KV or more with an increment of 1KV per step Exposure time: 1ms to 10sec Digital display of mAs and kV should be available Should have anatomical programming radiography. Should have over loading protection feature. Each 1.00 4653495.00 4653495

2 Item-2 70M.A.X-RAY MACHINE(MOBILE), X-Ray Generator: Power: 2.5 KW or more Max KV : 100 Max mA: 60 Max Range: upto 200 mAS Exposure time: 20 msec to 5 sec or less • X-Ray Tube: Stationary or Rotating Anode with focus spot 1.2 - 1.6 Tube Stand: The tube stand should be fully spring/counter balanced with rotation Light beam diaphragm collimator Integrated Cassette box AERB approved Each 1.00 1083852.00 1083852

3 Item-3 DENTAL X-RAY MACHINE, Dental radiographic units in which the dental film is placed inan external film cassette. These units are designed for imaging the maxillofacial region using a rotating x-ray beam (panoramic radiography), which produces a single image of the dental arch as a fixed elliptical shape; and/or to obtain images of the complete skull (cephalometric radiography) or of a region of interest from various angles. Some extra oral units can produce multilayered transverse images of the maxillary and mandibular jaws (cross- sectional tomography). It shouldbedigital. SuitableforAdultandPediatrics. Minimumtotalfiltrationshallbe2.5mmAl. Heatcapacityshallbe≥20,000HU. Focalspotsizeshouldbe0.6mm. Constantpotential;high-frequencyrequired. AutomaticExposureControl(AEC)isrequiredwhichisused to control the length of x-ray exposure. The exposure timer controls the length of the x-ray exposure; typical exposure timesare0.1to5secondsforcephalometricradiographyand 5to20secondsforpanoramicradiography.Patientselection Switches (Thin, Normal and Obese) Feather touch keypad and length of exposure cable should be5 to 6 meters. Easeofoperationasallthefunctionscanbeselectedfromthe remote control as well as timer. An excellentoutput of60kVto80kV,0mAsto15mAs. Exposuretimeshallbe≤15sec AudibleandVisualindicationof“X-RayOn”(Radiation indications). Should provide compatible voltage stabilizer (Built in/External). SourcetoImageDistance(SID)400-500mm Magnification:1.2-1.5x ShouldbeCDSCOandAERBapproved. ShouldcomplywithBISstandards. ShouldcomplywithUSFDA/EuropeanCEstandardsincase of non-availability of BIS standards. ShouldconformtoISO13485qualitystandards. ShouldconformtoIEC60601-1Generalrequirementsof electrical safety standard03years PreventiveMaintenancevisitsatleastonceineach quarterShouldprovide2sets(hardcopyandsoftcopy)of: User, technical and maintenance manuals should be supplied in English/Hindi/Regional language along with machine diagrams. Service and operation manuals (original and Copy) to be provided. Each 1.00 1001385.00 1001385

4 Item-4 ECHOCARDIOGRAM /2D3D/4D, Description of Function 1.1 Colour Doppler Echocardiography System is required to study the anatomical abnormalities and blood flow in the heart and associated vessels. 2 Operational Requirements 2.1 Latest generation Electronic Phased array Colour Doppler system with Minimum 50,000 digital processing channels with LIVE 3D imaging. System should be DICOM ready and capable of being interfaced with HIS/RIS/PACS. 2.2 Should be field up gradable to next generation system on site. All new software should be upgraded free of cost for at least 7 years 2.3 Frequency compounding or better technology for better resolution and penetration. 3 Technical Specifications 3.1 Latest generation Electronic Phased array Colour Doppler system with Minimum 50,000 digital processing channels with LIVE 3D imaging. 3.2 256 grey shades for sharp contrast resolutions 3.3 Adult & Paediatric Trans thoracic Cardiac, TEE (Adult & Paediatric) and Vascular Probes to be supplied which should belatest generation wide band transducers. 3.4 Harmonic Imaging- System should have following modes in harmonic with separate setting for: a. Tissue Harmonic. b. Contrast Harmonic c. Harmonic Angio. d. Quantification of harmonics imaging 3.5 Harmonic imaging capability in Adult Cardiac, Paediatric Cardiac and linear Probe 3.6 Gain control in two dimensions for additional level of flexibility to image quality control. 3.7 Real time high frequency 2D for higher resolution and low frequency Doppler for higher sensitivity in all probes. 3.8 Frame rate should be 300 FPS or more 3.9 Steerable PW/CW in all Phased Array probes. 3.10 High-definition acoustic zoom for enlarging sections of 2D and Colour flow images with more acoustic information for greater clarity and detail while maintaining an optimal frame rate. 3.11 Modes - 3D, 2D, M-Mode, Steerable PW/CW Doppler, Colour Doppler and High Definition Colour flow. 3.12 Monitor should be 15" or more, high-resolution colour Monitor. Tilt and Swivel monitor should be able to view in all angles and all light conditions. 3.13 Colour Flow Imaging for : a. Increased lateral & spatial resolution. b. Detection of even subtle areas of turbulence, displaying a more physiological blood flow appearance without loss of frame rate. c. Colour flow with capability of automatically picking up colour flow as a function of focal depth 3.14 Tissue Colorization (B-Colour) for improved contrast resolution 3.15 Application software for Adult, Paediatric, Foetal and Peripheral Vascular and Trans oesophagal applications. (All application packages should be built into the system) 3.16 Cine loop memory- more than 120MB of memory or equivalent cineloop memory in frames/sec. a. High Frame rate review for better clarity of playback images study in slow motion. b. Quad loop with memory for pre and post image comparison of any procedure. c. Memory- 256 frames or more in quad loop. M Mode & Doppler Scroll Memory-40 seconds or more. d. Frame grabber facility for post analysis. 3.17 Various maps for pre and post processing. 3.18 ECG trigger facility. 3.19 User defined system and application presets for multi-user department. 3.20 DVD/CD writer or flash memory and USB connector 3.21 Dedicated integrated dynamic stress echo package for flexible user defined protocols with stacked sub loops facility and contrast stress protocol usable for stress echocardiography. Each 1.00 3078768.00 3078768

5 Item-5 ECG MACHINE 3 CHANNEL. Electrocardiographs,multichanne Continuouslydetect,measureanddisplayapatientsechocardiogram (ECG) through leads and sensors attached to the patient Simultaneous3ChannelECGrecordingwith12lead simultaneous acquisition. Shouldhaveadigitaldisplayof3channelECGandshould have three modes (Automatic, Manual and rhythm). Heartratemeasurementrangetobeatleast30bpmto250 bpm, with accuracy better than ± 5bpm. Heartratetrenddisplayofatleastprevious24hours. Arrhythmiadetectionfacilityrequired;minimumgradationof1 bpm.<60dB Shouldmaintainnominaltemperatureandtheheatshouldbe disbursed through a cooling mechanism 220V±10%,50Hz Batterypowered,silenceablealarmforpowerfailure. Batterychargertobeintegraltomainspowersupply,andtocharge battery during mains power operation of unit. Internal,replaceable,rechargeablebatteryallowsoperationforat least one hour in the event of power failure.3leadECG cable. 100setsofECGconnectionelectrodes(ifdisposabletype). 5 sets of ECG connection electrodes (if reusable type)Capableofoperatingcontinuouslyinambienttemperatureof-10to 60 deg C and relative humidity of upto 90% in ideal circumstances ShouldbeCDSCO approved. ShouldcomplywithBISstandards. ShouldcomplywithUSFDA/EuropeanCEstandardsincaseof non-availability of BIS standards. ShouldconformtoISO13485qualitystandards. ShouldconformtoIEC60601-1Generalrequirementsofelectrical safetystandards 03 years PreventiveMaintenancevisitsatleastonceineachquarterShouldprovide2sets(hardcopy)of:- User,technical,maintenanceandservicemanualsshould besuppliedinEnglish/Hindi/Regionallanguagealongwith machine diagrams. Listofequipmentandproceduresrequiredforloca Each 1.00 94248.00 94248

6 Item-6 CARDIAC MONITOR.Multichannel (up to 12 leads) ECG measurement and selectable display of upto 5 leads at a time. Temperature probe to be reusable, external skin contact type. Temperature range at least 30 to 40 deg C, minimum gradation 0.1 deg C. Heartratemeasurementrangetobeatleast30to 250 bpm, with accuracy better than ± 5 bpm and minimum gradation 1 bpm. SpO2 measurement range at least 40-70% and 70 to99%,withaccuracybetterthan±1%for40-70range and better than ± 3% for 70-99 range and minimum gradation 1%. Blood pressure monitoring range at least 30 to 300 mmHg, minimum gradation 1 mmHg. Respirationratemeasurementrangeatleast0to100 bpm, minimum gradation 1 bpm. Trend display of each parameter over at least previous 24 hours to be selectable. LCDscreenfordisplayingallparameters. AudioVisualalarmsrequired:highandlowlevelsfor each parameter (operator variable settings), sensor / wire / probe disconnected, low battery. 5 para monitor ShouldcomplywithBISstandards. ShouldcomplywithUSFDA/EuropeanCE standardsincaseofnon-availabilityofBIS standards. ShouldconformtoISO13485quality standards. Should conform to IEC 60601-1 General requirementsofelectricalsafetystandardsShouldprovide2sets(hardcopyandsoftcopy)of: User,technicalandmaintenancemanualsshould be supplied in English/Hindi language along with machine diagrams. Serviceandoperationmanuals(originalandCopy) to be provided. Satisfactorycertificateforanyexistinginstallation from government hospital Each 5.00 112155.12 560776

7 Item-7 CARDIAC MONITOR WITH DEFIBRILLATOR.Manualorautomaticdefibrillatorwiththefacilityforapplying transcutaneous pacing (TCP), usually done by giving electrical stimulus to the heart (delivering pulses of electric currentthroughthepatientchest)whichstimulatestheheart tocontract.Emergency/ICU/Cardiaccar Defibrillatorshouldbeeasytouse,havingfacilityforAED (Automated External Defibrillation) and Manual mode defibrillation based on Biphasic technology. It should be able to deliver shock from 1 J to 200 Joules (ormore)inManualModeandautomaticmodeforpediatric & adult patients. Itshouldhaveatleast5LeadECGMonitoring. ShouldhaveCPRMetronomeduringAEDMode operation. Itshouldhave7inch(ormore)diagonalcolorLCD/LED screen facility to view color mode display. Should work onA.C.and D.C.and onlatestrechargeable Lithium-Ion batteries with fully charged Battery capacity to monitorminimum4hoursofoperationand100(±20)shocks of 200 Joules discharges. Shouldhavein-builtprinter/recorder. 8ShouldhavevitalsignmonitoringofSpO2,NIBP. 9.Shouldhavefacilityforexternalpacemaker(withDemand and Fixed/Non demand mode) and Synchronous Cardioversion.220+/-10%VAC, 50Hz Rechargeablebatterybackupofminimum04hours ReusableHardPaddels-1Set MultipurposeElectrode(AEDcumPacingPads)-3No.s Adult and 2 No.s PediatricPads SpO2 Probe-1Adult & 1 PediatricNIBPHose&Cuff1Adult&1Pediatric Capableofoperatingcontinuouslyinambienttemperatureof -10to60degCandrelativehumidityofupto90%inideal circumstancesShouldbeCDSCO approved. ShouldcomplywithBISstandards. ShouldcomplywithUSFDA/EuropeanCEstandards incase of non-availability of BIS standards. ShouldconformtoISO13485qualitystandards. ShouldconformtoIEC60601-1Generalrequirementsof electrical safety standards.03 years PreventiveMaintenancevisitsatleastonceineach quarterUser,technicalandmaintenancemanualstobesuppliedin English/Hindi language along with machine diagrams. Advancedmaintenancetasksrequiredshallbe documented. Each 2.00 530145.00 1060290

8 Item-8 VENTILATORS (ADULT). Mechanicalventilatorsarelifesupportdevicesthatmovegas(e.g., airand/oroxygen)toandfromapatient'slungs.Thesedevicesmay providetemporaryorpermanentrespirationforpatientswhocannot breathe on their own, or who require assistance maintaining adequate ventilation. It can be used in two modes Invasive (Tube Inside trachea) and Non invasive (through face mask/nasal tube) ventilation.ShouldhavefacilityforInvasiveandNon-Invasiveventilation. MicroprocessorControlsuitableforPediatricandadultventilation. ElectromagneticCompatibleHingedarmholderforholdingthe circuit. 4.ShouldhavebuiltintouchcolourscreenTFTdisplayofminimum 10”ormorefordisplayofwaveformsandMonitoredvalue. 5.ShouldhaveinbuiltfacilitytoupgradewithEtcO2. 6.FacilitytoMeasureanddisplay:- a)Statusindicatorforventilatormode. b)Batteryindication. c)PressureVstimeVsvolumeVstime,flowVstime3curves/ waveforms. d)Alarmsetting. 7.Automaticcomplianceandleakagecompensationforcircuit and ETTube. 8.Shouldhavefacilityoflogbook,foreventsandalarmswithdate& time. 9.Shouldhavefollowingsettings. a)Tidalvolume(Minimumatleast50ml,Maximumupto2000ml) b)InspiratoryPressure(upto80cmofH20) Respiratoryrate1to80bpm. Apnoeabackup rate. CPAP/PEEP Pressuresupport. Fi02 PauseTime Pressure&flowTrigger Inspiratoryflowupto120Lpm. MonitoringandDisplayofthefollowingParameters. AirwayPressure(Peak&Mean). Tidalvolume(Inspired&Expired). Each 1.00 2309076.00 2309076

9 Item-9 VENTILATORS (PAEDIATRICS/UNIVERSAL). Ventilators (Paediatrics) 1. Use 1.1 clinical purpose To provide automated, alveolar ventilatory support for patients in emergency situations. 2 Used by clinical department/ ward Emergency /Critical Care (NICU/PICU) techNical 2. techNical characteristics 2.1 technical characteristics (specific to this type of device) 1) Should have facility for Invasive and Non-Invasive ventilation; 2) Microprocessor Control suitable for Neonatal and Pediatric ventilation; 3) Should have modes of ventilation equipped with newer modes of ventilation: 3 .1) Assist/ Control 3.2) Volume control 3.3) Pressure control 3.4) Pressure support 3.5) SIMV with pressure support (Pressure and volime control) . 3.6) PEEP 3.7) Inverse ratio Ventilation 3.8) Non invasive ventilation-BIPAP, CPAP 3.9) Apnea ventilation, user selectable, volume & pressure control; 4) Should have built in color screen TFT/LCD display of minimum 8” for display of waveforms and monitored value; 5) Should have inbuilt facility to upgrade with EtcO2; 6) Should have facility to measure and display of the following parameters: 6.1) Airway Pressure (Peak & Mean) 6.2) Tidal volume (Inspired & Expired) 6.3) Minute volume (Inspired & Expired) 6.4) Respiratory mechanics 6.5) Spontaneous Minute Volume 6.6) Total Frequency 6.7) FiO2 dynamic 6.8) Intrinsic PEEP 6.9) Plateau Pressure 6.10)Resistance& Compliance 6.11)Use selector Alarms for all measured & monitored parameters 6.12)Occlusion Pressure 6.13)Pressure Flow & Volume curves; 7) Automatic compliance and leakage compensation for circuit and ET tube; Each 1.00 2945250.00 2945250

10 Item-10 PULSE OXIMETER 3 PARA. Itisusedforthetranscutaneousmeasurementanddisplay ofhaemoglobinoxygensaturation(SpO2).Thesignalsare produced by light-emitting diodes (LEDs) and received by aphotodetector.ThedevicedisplaystheSpO2valuesand may also measure and display pulse rate. Shouldbeaportable,lightweight,desktopmodelwith adult, pediatric and neonatal finger probes. Should have digital display with parameters: SpO2, pulserate,plethysmographwaveform,alarmmessage and battery state indication. SpO2detectionrangetoinclude:70–100% SpO2resolution:1%orless AccuracyofSpO2shouldbewithin+/-3% SpO2probesshouldbereusable. Pulse rate range detection range to include: 30-240 beats per minute (bpm). Pulserateaccuracy:within±3bpm. Pulserateresolution:1bpmorless Audio and visual alarms required: high and low SpO2 and pulse rate (operator variable settings), sensor disconnected, sensor failure, low battery.Suitablefordetectioninlowperfusionconditions. Shouldhaveaminimumof02hoursback-uptime. Shouldhavetrenddataofatleast36hrs.Digitaldisplayandeasilyaccessiblebuttonsto operate the machine. Lightweight <60dBA Shouldbedispersedthroughexhaust. 220V+/-10%AC,50Hz Yes,withminimumbackuptimeof02hour Tobespecifiedbymanufacturer Tworeusableprobeseachforadult,pediatricandinfant use Capableofoperatingcontinuouslyinambienttemperature of -10 to 60 deg C and relative humidity upto 90%in ideal circumstances. 03 years PreventiveMaintenancevisitsatleastonceineach quarter.Shouldprovide2sets(hardcopyandsoftcopy)of: User,technicalandmaintenancemanualsshould be supplied in English/Hindi language along with machine diagrams. Listofequipmentandproceduresrequiredfor local calibration and routine maintenance. Each 7.00 22299.08 156094

11 Item-11 INFUSION PUMP. Aninfusionpumpinfusesfluids,medicationornutrients into a patient's circulatory system. It is generally used intravenously, although subcutaneous, arterial and epiduralinfusionsareoccasionallyused. Emergency,OperationTheatre,Criticalcare TECHNICAL 2.TECHNICALCHARACTERISTICS Flowrateprogrammablerangeatleastfrom0.1to200 ml/hr, instepsof 0.1ml/hr; and at least from 100to 1200 ml/hr in steps of 1 ml/hr. SaveslastinfusionrateevenwhentheACpoweris switched off. Bolusrateshouldbeprogrammabletoapprox.500ml, with infused volume display. Selectableocclusionpressuretriggerlevelsselectable from 300, 500 and 900 mmHg. Accuracyof±2%orbetterforset parameters. Maximumpressuregenerated20psi. Pauseinfusionfacilityrequired. Self-checkcarriedoutonpowering on. Comprehensive alarm package required including: occlusionalarm,nearendofinfusionpre-alarmandalarm, volume limit pre-alarm and alarm, low battery pre-alarm and alarm, AC power failure, drive disengaged. Itshouldbeopen system Automatic Inbuilt 220+/-10%VAC, 50Hz Internalrechargeablebatteryhavingaminimumof2hours backup Batterypoweredalarmforpowerfailureordisconnection Asspecifiedbymanufacturer 5.ACCESSORIES,SPAREPARTS,CONSUMABLES ClampformountingpumponIVstand 6.ENVIRONMENTALANDDEPARTMENTALCONSIDERATIONS Capable of operating continuously in ambient temperatureof-10to60degCandrelativehumidityof up to 90%. Easytocleanandmaintain. 7.STANDARDSANDSAFETY ShouldbeCDSCOapproved. ShouldcomplywithBISstandards. ShouldcomplywithUSFDA/EuropeanCEstandards incase of non-availability of BIS standards. ShouldconformtoISO13485quality standards. Each 3.00 153153.00 459459

12 Item-12 DIGITAL ARM BP APPARATUS. Accuracy 0.03 pressure Cuff Type 32cm Weight 300g Measurement Range (Pressure) 37.30 kPa Usage/Application Personal Pulse Measurement Range 199 Beats Air Pressure Range 860 hPa Measuring Method Oscillometric method Power Source 6V (4 AA batteries) Dimensions L93 xW120 x H59mm LCD Size 54x64mm (LxW) Each 12.00 3063.06 36757

13 Item-13 STETHOSCOPE. Technical Specifications of STETHOSCOPE 1. Patient friendly Non-Chill Rim 2. Solid stainless steel / anodized aluminium chest piece 3. Frame should be stainless steel 4. Excellent Acoustic Diaphragm and comfortably fit with soft sealing ear tips 5. Anatomically correct headset & comfortably angled 6. Single lumen tubing in a variety of popular colours 7. Y PVC tubing 8. Should bear ISI mark/ CE compliant/ FDA approved Each 12.00 4410.81 52930

14 Item-14 NEBULISER. 1. Should be lightweight, portable and compact. 2. Should have a dust filter. 3. Should be able to deliver a flow rate of 6-8 lpm at operating pressure range 8 to 16 psi. 4. Should have a check valve to protect the device against contamination due to backward inhalation 5. Should be compatible for continuous use – Ultrasonic type 6. Should works on 200-240Vac/50Hz. 7. Should be supplied with nebulization accessory kit with mask for paediatric – 2 nos. each Each 10.00 2940.54 29405

15 Item-15 BABY INCUBATORS. 1. Should confirm to IEC -60601-1 electrical safety standard for medical equipment. 2. Should be a servo controlled incubator with a rise time of not more than 45 minutes and a temperature stability of +/- 0.2° C at steady state. 3. Should have the large baby access doors at both sides. 4. The double wall incubator canopy should be largest at least length 80 cm, width 50 cm, and height 45 cm to accommodate tubing and oxygen hood. 5. Should have four elbow operated access ports. Should also have one iris port for ventilator tubing and easy head access. 6. Should have at least four small ports for IV tube and one big iris port hole for other probe sensor cable. 7. Should be able to tilt the baby bed to 10 ° on either side without opening the canopy/doors of the incubator. 8. The mattress and it’s internal airflow path should be easily disassembled for cleaning 9. The internal of the incubator should be moulded, rounded without any devices for easy cleaning and inhibiting bacterial growth. 10. Should have audio & visual display of alarm conditions. 11. The water level should be visible and should be able to refill water without opening the incubator. 12. Should have two temperature probes for patient skin temperature and auxillary temperature measurement. 13. Baby bed should be withdrawable from both sides. 14. Should have optional in-built baby weighing scale to measure the baby weight without disturbing baby. 15. Unit should be height adjustable. 16. Should have optional oxygen saturation set range from 21 to 60 %. 17. Should have humidity set range from 40 to 90%. 18. Should have trend display facility for temperature, humidity and oxygen 1. Should have provided with X-Ray tray holder. 2. Controller specification: i. Modes of operation : air mode , baby mode (servo mode) ii. Temperature measurement Range : a. Air temperature : 10 -40 °C b. Skin temperature : 20-42°C c. Accuracy : +/-0.2 °C d. Resolution : 0.1 °C e. Interchangeability : +/- 0.1 °C i. Display : should have colour display with control for Air temperature, patient temperature ii. Set temperature a. Should display heater power in digital forms. b. Should have alarm facility for different parameters. i. Temperature control range : a. Air mode : 30 to 39 °C with a provision to override above Each 3.00 441080.64 1323242

16 Item-16 EMERGENCY RESUSCITATION KIT BABY. Emergency resuscitation kit baby Silicone Resuscitator / ambubag 500ml - Child Miller Laryngoscope with 0 & 1 No. Blades Guedel Airways - 0, 1 & 2 No. Silicone Face Mask - 0 & 1 No. Oxygen Reservoir Bag with Valve Oxygen Tube Foot Suction with Silicone Tube Carry Case. Oxygen 5ltr cylinder Torch LED Standard weighing scale Mobile & User-Friendly Design – Lightweight and easily dismantled for quick transportation and setup anywhere. Stable Construction – Features a Moulded-ABS floor plate, ensuring reliability during every measurement. Accurate Height Measurement – Measuring range of 20 - 205 cm with 1mm graduation, offering precise readings in both inches and centimetres. Easy-to-Read Scale – Clearly marked scale on both sides of the measuring rod for effortless height assessment. digital Weighing Scale Weighing capacity: 130Kg Graduation: 0.5Kg Durable & Portable – Built with high-quality plastic parts for long-lasting performance while remaining lightweight and easy to carry. Easy Assembly & Disassembly – should be Supplied in a knock-down condition with a comprehensive English manual for effortless setup. Each 4.00 68612.54 274450

17 Item-17 3rd Party Charges at 1 Percent Ls 1.00 191195.00 191195

18 Item-18 Miscellaneous and rounding off Ls 1.00 2028.92 2029

Estimate for Labour Ward Neonatal Ophthalmic Equipments for Kampli New 100 Beds Taluka Hospital, Under 2515 KKRDB Macro for the year 2024-25. (PWD/2025-26/IND0202)

SL. No. Item Code Item Name Unit Scheduled Quantity Unit Price Rs. Amount Rs.

1 Item-1 RADIANT WARMER. Emergency resuscitation kit baby Silicone Resuscitator / ambubag 500ml - Child Miller Laryngoscope with 0 & 1 No. Blades Guedel Airways - 0, 1 & 2 No. Silicone Face Mask - 0 & 1 No. Oxygen Reservoir Bag with Valve Oxygen Tube Foot Suction with Silicone Tube Carry Case. Oxygen 5ltr cylinder Torch LED Standard weighing scale Mobile & User-Friendly Design – Lightweight and easily dismantled for quick transportation and setup anywhere. Stable Construction – Features a Moulded-ABS floor plate, ensuring reliability during every measurement. Accurate Height Measurement – Measuring range of 20 - 205 cm with 1mm graduation, offering precise readings in both inches and centimetres. Easy-to-Read Scale – Clearly marked scale on both sides of the measuring rod for effortless height assessment. digital Weighing Scale Weighing capacity: 130Kg Graduation: 0.5Kg Durable & Portable – Built with high-quality plastic parts for long-lasting performance while remaining lightweight and easy to carry. Easy Assembly & Disassembly – should be Supplied in a knock-down condition with a comprehensive English manual for effortless setup. Infant Radiant warmer is an electrically powered device with a radiant heating source intended to maintain the thermal balance of an infant by direct radiantofenergyintheinfraredregionofthe electromagneticspectrum.12.Theresolutionshouldbe0.1degreeCandaccuracy should be 0.2 °C. 13Shouldhaveafacilitytolockthekeyboardtoavoid unwantedusermodificationofthesetparameters. Theheightofthewarmershouldbeadjustablefor different types of bed. Itshouldhaveseparatebassinettrolley,bedshouldbe tiltable and have provision for x-ray Each 2.00 500692.50 1001385

2 Item-2 ROOM WARMER. 2000W Radiator Type Oil Filled Room Heater With 1. 9 fins with 3 heat settings 2. Adjustable thermostat for desired temperature 3. Noiseless operations 4. Caster wheels for easy mobility 5. Cord winder, built in handle 6. Thermostat 7. Safety tilt switch to safe guard against improper installation 8. Manually reset thermal cut out 9. Auto reset thermal cut out. Each 1.00 33099.00 33099

3 Item-3 FOETAL DOPPLER. It is used to noninvasively detect foetal heart beats using Ultrasound/Doppler technology. The heart beats are typically conveyedaudiblyviathemeasuring/displayunitandattachedprobe whichisappliedtothesurfaceofthepregnantwoman'sabdomen.Itshouldmeasurefetalheartrate(FHR)accurately. Itshouldhavebacklitdigitaldisplay. TheprobeshouldbehighlysensibletopickupFHR.Theprobeshouldbewaterproof. Probe(transducer)with2-5MHzfrequencyattached viaa cable. Itshouldgiveindicationforlowbattery. Itshouldhavebuilt-in-speakerwithvolumeadjustment. Built-inrechargeableLi-onbatterywithminimumback upof6-8Hrs. Backlitdigitaldisplay Lightweight Noise:<60dBA NA Portable,Handhelddevice 220+- 10%VAC,50Hz Built-inrechargeableLi-onbatterywithminimumbackupof6-8 Hrs. Threeyears PreventiveMaintenancevisitsatleastonceineachquarter.Shouldprovide2sets(hardcopyandsoftcopy)of: User,technicalandmaintenancemanualsshouldbesuppliedin English/Hindi language along with machine diagrams. Serviceandoperationmanuals(originalandCopy)tobe provided. Each 1.00 100138.50 100139

4 Item-4 CARDIO TOCO GRAPH (CTG)MONITOR. It is used to noninvasively detect foetal heart beats using Ultrasound/Doppler technology. The heart beats are typically conveyedaudiblyviathemeasuring/displayunitandattachedprobe whichisappliedtothesurfaceofthepregnantwoman'sabdomen.Itshouldmeasurefetalheartrate(FHR)accurately. Itshouldhavebacklitdigitaldisplay. TheprobeshouldbehighlysensibletopickupFHR.Theprobeshouldbewaterproof. Probe(transducer)with2-5MHzfrequencyattached viaa cable. Itshouldgiveindicationforlowbattery. Itshouldhavebuilt-in-speakerwithvolumeadjustment. Built-inrechargeableLi-onbatterywithminimumback upof6-8Hrs. Backlitdigitaldisplay Lightweight Noise:<60dBA NA Portable,Handhelddevice 220+- 10%VAC,50Hz Built-inrechargeableLi-onbatterywithminimumbackupof6-8 Hrs. Threeyears PreventiveMaintenancevisitsatleastonceineachquarter.Shouldprovide2sets(hardcopyandsoftcopy)of: User,technicalandmaintenancemanualsshouldbesuppliedin English/Hindi language along with machine diagrams. Each 1.00 447678.00 447678

5 Item-5 DELIVERY KIT. 1 Needle Holder(15cm) /20cm- 1 2 Kidney Tray s/s 12 -1 3 Kidney Tray s/s10- 1 4 Gallipot 10 02/4- 1 5 Umbilical cord scissors s/s (10.5cm)/4- 1 6 Mayo scissors (straight) s/s- 1 7 Sponge holding forceps -1 8 Episiotomy scissors -1 9 Dissecting forceps 1× 2 Teeth 5 1/8 -1 10 Dissecting forceps serrated jaw 5 1/8- 1 11 Spencer well artery forceps straight 8- 2 12 Spencer well artery forceps curved 8- 2 13 Spencer well artery forceps straight 6- 2 Each 5.00 32986.80 164934

6 Item-6 EPISIOTOMY KIT. Episiotomy kit AMNIOHOOK, 20 cm -1 BASKET, INSTRUMENTS, for sterilization, wired 25x15x5 cm-1 FORCEPS, HAEMOST. KOCHER, 14 cm, 1x2 teeth straight-2 FORCEPS, TISSUE, STAND, 1x2 teeth, straight 14.5 cm -1 NEEDLE HOLDER, MAYO-HEGAR, standard, 18 cm-1 SCISSORS, MAYO, curved 14 cm -1 SCISSORS, blunt/blunt, straight, OPERATING, 17.5 cm 03-02-17-1 Each 2.00 31808.70 63617

7 Item-7 CESAERAN DELIVERY KIT. CAESAREANdelivery kit 1 Towel clip 2- 2 Wrigley’s Forceps- 1 3 Artery forceps, curved, 15cm- 5 4 Artery forceps, curved, 18cm -2 5 Dissecting forceps straight, ½ teeth -1 6 Dissecting forceps straight, plain (18cm)- 1 7 Green armytage forceps -1 8 Sponge holding forceps -1 9 Allis tissue forceps (4 ×5 teeth)-2 10 Handle for surgical blade- 2 11 Needle Holder 18cm -2 12 Doyen retractor -2 13 Langenbeck retractor -2 14 Scissors curved 180mm- 2 15 Scissors straight 180mm- 2 16 Ligature scissors -2 17 Instrument Container s/s with Cover- 1 Each 3.00 111919.50 335759

8 Item-8 CRANIOTOMY SET. 1. Rampleysponge holding forceps 230 mm -1 2. B.P. handle no. 3 02 3. B.P. handle no. 4 02 4. Towel clips 3/12” 2 5. Towel clips 5” 2 6. Allis Classic Tissue Forceps 5” 2 7. Sargent dural mater elevator, with groove for stellate incisions. 2 8. Pennybacker Periosteal Elevator. Sharp, 6 mm. (1/4 in.) wide, curved. 1 9. Farabeuf Periosteal elevator, Straight, 160 mm, 61/4” 1 10. Farabeuf Periosteal elevator, Curved, 160 mm, 61/4” 1 11. Adson periosteal elevator Straight, 8 mm 1 12. Adson periosteal elevator Curved, 7 mm 1 13. Cottle Periosteum Elevator, 195 mm, 73/4”, 8 mm 1 14. Cottle Periosteum Elevator, 170 mm, 73/4”, 4 mm 1 15. Schneider Periosteal Elevator, 175 mm, 7”, 13 mm 1 16. Halstead- Mosquito Forceps, Straight, 125 mm 2 17. Halstead- Mosquito Forceps, Curved, 125 mm 2 Each 1.00 382882.50 382883

9 Item-9 SILASTIC VACUUM EXTRACTOR Specifications: ➢ Vacuum extractor machine for fetal delivery: ✓ Electrical Requirement – 220-230 volts, 50 Hz ✓ 50 mm vacuum gauge ✓ Non collapsible suction tubing ✓ Two 1.5 litres glass jars with overflow safety ✓ Bacterial filter fitted on the back ✓ Noise level should not be more than 50 +/-3 dB ➢ Silicon vacuum cups: ✓ Medical grade silicon, soft allowing for easy insertion, durable, biocompatible, with excellent vacuum seal, should be able to withstand cleaning procedures and should be reusable, should be available in standard sizes of 50, 60 and 70 mm. ✓ The handle and valve assemblies should be of chrome plated brass that can be replaced. ✓ The shaft should have ridges to facilitate a firm grip. Suitable stand should be provided Each 2.00 34164.90 68330

10 Item-10 PULSE OXIMETER BABY & ADULT. Pulse oximeter adult and baby 1. Should have plethismographic wave form with numeric display for SPO2 and Heart rate on LCD/TFT display. 2. Should have a SPO2 range of 0 to 100%. 3. Should have SPO2 accuracy of ±2%. 4. Should provide bar graph for pulse strength. 5. Audio and visual alarm for both upper and lower SPO2, Heart rate. 6. Should provide with adult and paediatric reusable finger probe with technology from standard reputed companies. 7. Beep sound and alarm sound should have separate volume control 8. Should have a minimum of 2 hours back-up time. 9. Should be a portable, light weight and desktop model. 10. Should work with input 200 to 240Vac 50 Hz supply. 11. Should have safety certificate from a competent authority CE / FDA / STQC CB certificate /CDSCO certificate or valid detailed electrical and functional safety test report from ERTL. Copy of the certificate / test report shall be produced along with the technicalbid Each 1.00 32986.80 32987

11 Item-11 CARDIAC MONITOR BABY. Suitable for Paediatric Patients monitoring - TFT LCD colorfulscreen with 12.1 inches - Parameters: ECG (HR), RESP (Breaths), NIBP (SYS, SIA, MAP), SpO2 (Pulse rate, Saturation), - Adjustable audible and visual alarms RESPIRATION - Measurement range: Approx. 0-200 breath/min - Speed: Approx. 3, 6.25, 12.5, 25, 50mm/sec ECG: - Input: 5 leads ECG electrodes HEART RATE RANGE -- for ped/neonate Approx. 15-350 bpm - Accuracy: ±1 bpm SpO2 - Range: 0-100% - Accuracy: ±3% NIBP - NIBP range at least 10 to 300 mmHg, minimum gradation 1 mmHg - Manual, automate and STAT modes - Measurement range: Auto mode - Memory: more than 500 patient’s information ACCESORIES AND CONSUMABLES - child B.P. Cuff – 2 pcs - SpO2 probe child/ – 2 pcs - ECG cable ( 5 leads) – 1 pcs – Disposable electrode – 50 pcs - Cardio gel: 100g – 5 pcs - ECG trunk cable – 1 pc - supply cable – 1 pc POWER SUPPLY - AC 220V, 50Hz Each 2.00 212058.00 424116

12 Item-12 NEBULIZER BABY. Should be lightweight, portable and compact. 2. Should have a dust filter. 3. Should be able to deliver a flow rate of 6-8 lpm at operating pressure range 8 to 16 psi. 4. Should have a check valve to protect the device against contamination due to backward inhalation 5. Should be compatible for continuous use – Ultrasonic type 6. Should works on 200-240Vac/50Hz. 7. Should be supplied with nebulization accessory kit with mask for paediatric – 2 nos. each 8. Nebulization mask for paediatric – 10 nos. each Each 1.00 2945.25 2945

13 Item-13 WEIGHING MACHINE ADULT. shouldbemadeofsturdymechanicalstructure to support/withstand heavy workload in public health centre. Platformsize350x350mm(Tolerance+/- 10%) Measuringcapacityshouldbeatleast150kg with accuracy up to 100 gms. The display should be LCD/LED with four digits. Thesizeofdisplayshouldbeminimumheight24 mm for clear visibility. Thescaleshouldoperateonelectricityaswellas on inbuilt re-chargeable batteries. The reading should get locked automatically at stableweightandthereshouldbeanindication for the same. ThescaleshouldhavereadingsinSIsystem (Kgs and Gms). Thescaleshouldhaveautoofffeaturewhennot in use. Itshouldbeabletorecordweightinlessthan05 seconds. Builtinrechargeablebattery.03years PreventiveMaintenancevisitsatleastoncein each quarte Each 1.00 2827.44 2827

14 Item-14 WEIGHING MACHINE INFANT. abletop,lightandportable. ShouldhaveeasytoreadLCD/LEDdisplay. Weightdisplaysupto2decimalpointinKgs/gms. Weighing pan should be skin friendly, non-toxic durable material suitable for weighing newborn babies and the constructionshouldnotallowthebabytoslipfromthetray TheTrayshouldbemadeofABS/Acrylicandmustbedevoid of any sharp edges. Easytocleanbabytray. Zeroweightadjustmentfacility. Quick,cleardigitalreadouts. Measurementdoesnotchangewithpositionofbabyonthe pan. Provisiontomeasuretheheightofthebabyinitslaying position. Accuracy:5gm,resolution:1g,Measuringlimit:10gmto20 kg. Builtinrechargeablebattery/ACmains.ase:300mmx265mmx85mm±20%,Pan:510mmx 300mm x 85mm (minimum 3yearsincludingallspares. Preventivemaintenancevisitsatleastonceineachquarter. Each 1.00 5825.42 5825

15 Item-15 SPARE ICE PACK BOX 1.storage Capacity: 10-15 litres 2. Cold life Type: Long range 3. 4. Weight (with empty ice pack): should light weight 5. External surface and internal lining material: LLDPE (Linear Low Density Polyethylene) 6. Insulation material: CFC-free Polyurethane (PUF) 8. Cold life without opening: minimum 96 hrs at +43 degrees Celsius 9. Casing material: Internal and external casing materials must resist UV degradation and all joints between the moulded components must be water and vapour proof, must be easy to clean and must be selected with environmentally safe end-of-life disposal in mind. Chlorinated plastics and composites containing epoxy resins are not permitted. All metallic components and their fixings must be constructed in stainless steel or a suitable non-ferrous metal. 10. Chemical resistance: The external and internal surfaces of the container must be resistant to chemicals used for disinfecting (e.g. sodium hypochlorate, 5.25% in water). 11. Phase change material (PCM) filled cassettes of ice pack should be provided with Cold Box. 12. The cold box should be provided with handle or carrying belt for people 13. Should have removable lid to give full access to the interior of the cold box. The lid must be fitted with a captive labyrinth seal which engages with the container walls when the lid is closed so as to minimize cold bridging and maximize structural strength. Each 1.00 15887.52 15888

16 Item-16 DIGITAL AUDIOMETER. 1.Two Channel digital audiometer with ANSI specified standard 2.Test available:-Air conduction frequency range 125 to 8000 Hz and intensity range-10 to 120dB -Bone conduction,frequency range 250 to 4000 Hz and intensity range-10 to 80 dB 3.Maximum Hearing Level:-Air:-10dB to 120dBHL Bone:-10dB to +80dHBL Speech:-10dB to +100dBHL Masking:-10dB to +100dBHL 4.Tone ContinousTone ,PulseTone,Warble Tone 5.Masking:-Free as well as synochronizedmaskingNarrow band Noise,Speech Noise 6.Interruptor:Click free,5dB steps 7.Special Tests:-SISI,StengerTest,ToneDecay,ABLB 8.Free Field Optional 9.External Inputs:Taperecorder,CD Player or Microphone 10.Accuracy of frequency:better than 1% 11.ANSI specified standard head phones i.e TDH-39 with Audiocups(AC),Redior B-11(BC) ..PC interfacefor online communication . .Data Storage facilities. Each 1.00 883575.00 883575

17 Item-17 IMPEDANCE AUDIOMETER. ical Specifications Specifications For Impedance AudiometerImpedance : Probe tone frequency: 226Hz Level: 85 dB SPL (≈ 69 dB HL) ±1.5 dB Air pressure control: Automatic PressureRange: -600 to +400 daPa Pump Speed: Automatic, 50 - 300 daPa/s Compliance: 0.1 to 8.0 ml at 226 Hz probe tone (Ear volume: 0.1 to 8.0 ml) Test types: Tympanometry, Eustachian tube function 1 - Non perforated eardrum, Eustachain tube function 2 - Perforated eardrum, Eustachain tube function Reflex Functions : Tone - Contra, Reflex: 250, 500, 1000, 2000, 3000, 4000, 6000, 8000 Hz, Wide Band, High and Low pass Tone - Ipsi, Reflex: 500, 1000, 2000, 3000, 4000 Hz wide band, high and low pass. Stimulus duration: 750 ms Intervals: Down to 1 dB step size. Test Types: IPSI Reflex, Contra Reflex, Reflex Decay. Each 1.00 765765.00 765765

18 Item-18 ENT OPERATION SET INCLUDING HEADLIGHT,TONSILS. Draffin’s Bipod stand 2 Boyle-Davis mouth gag 2 Tongue Blades (Plane & Slotted with groove for ET tube)Different sizes 4 each Tonsil holding forcep 2 Tonsil dissector and retractor- Adenoid currete with and without cagelengh- 22 cm Different sizes 4 Yankuer suction tube 2 Tonsillar snares 4 Loop Applicator, Model E length 27 cm 1 Loops forApplikator , Polyglycolicasid, absorbable, 12 sterile packed, size 1 -1 Adenoid Forceps, sharp, length 19 cm- 1 Needle Holder, tungsten carbide inserts slender, length 18 cm 1 Long slender artery forceps straight, curved, Negus 1Each Wilson’s artery forceps small & large- 1 Each Doyens mouth gag 2 Babcocks forceps 2 Right angled retractors 2 Tonsil snare wires 10 Each 1.00 1001385.00 1001385

19 Item-19 EAR SURGERY INSTRUMENTS. 1. Fisch adjustable mastoid retractor 3x4 prongs, self retaining, sharp - 16cms-1 2. Wullsteinself retaining mastoid retractor 2x3 prongs -1 3. Shea aural speculum - oblique ended, anodized black - set of five 4. (3.3 x 4mm, 4 x 5.5mm, 5 x 7.5mm, 6 x 8.5 mm, 7 x 9.5 mm) 5. Mahadevaiya'sself retainingendomeatal retractor -1 6. Farabeuf periosteal elevator, SS - Tip 11 mm wide-1 7. Lempert's periosteal elevator (3 mm) -18 cms long -1 8. Cell seeker 450 with ball end -15.5 cms long -1 9. Lempert's Mastoid Curette 21 cm long - set of 3 of different sizes 1.8 mm, 2.4 mm, 2.8 mm -1 10. Micro Ear alligator forceps, serrated, straight jawed, fine - 0.4 x 3.5 mm, 8cms working length -1 11. Micro Ear alligator forceps, serrated, straight jawed - 0.8x 3.5 mm .-1 12. Wullstein Micro cupped forceps (round cup) - 2mm, 8cms working length -1 13. Micro cup forceps up-biting, oval cup- 0.9 x 1 mm, 8cms working length -1 14. Myringotomy knife adjustable (160 mm) -1 15. Beales ear microelevator 160 mm -1 16. Wullstein's ear raspatory blade rounded curved 160 mm -1 17. Rosen round knife, 45 degree angled, cutting -1 mm dia. -16 cms long -1 18. Rosen round knife, 45 degree angled, cutting with fenestrated blade - 3 mm diameter, 16 cms long -1 19. Plester's flap knife - round cutting blade - 2.4 x 3mm, 160 mm long .-1 20. Wullstein's needle, sharp, straight -16 cm -1 21. Wullstein's needle, sharp, slight curved -16 cm -1 22. Micro Pick 90 degree, 0.4m Each 1.00 80110.80 80111

20 Item-20 MICRO DRILL SYSTEM. Micro Motor drill Machine is an instrument made with motor to use like the pencil and used for working with the turning force from the revolving motor up to 35000rpm.And it is applied to cutting, grinding, polishing. The use of various burs according to the material and working way are available. should be mainly used for ENT clinic. .Torque : 280gf.cm Compact and portable Continuous variable speed control Forward and reverse Use with contra angle, straight hand piece Smooth, quiet operation Drill Specification:- Speed : Max 35,000rpm Output Voltage : DC 0-32V Includes : 1Control box,1 35K R.P.M. micro motor,1 On/Off Switch Foot Pedal,1 Handpiece base Input Voltage : 230 V Each 1.00 382882.50 382883

21 Item-21 LARYNGO SCOPE FLEXI TIP ALL SIZE. Laryngoscope indirect (Video) Laryngeal mirror. Used in examination of the larynx,Angular mirror-2 pieces To provide indirect vision To retract lips, cheeks, and tongue To reflect light into the mouth. Accurate image from flat surface mirrors, image magnified with concave mirrors .Stainless Steel. Fog free with Flat/round ribbed handle. The mirror shall be made of fiber glass and the handle shall be made of stainless steel 410/420 grade Sizes 1.6mm/size# 000 2.10mm/size#00 3.12mm/Size#0 Each 2.00 297891.00 595782

22 Item-22 OTOSCOPE. Laryngeal mirror. Used in examination of the larynx,Angular mirror-2 pieces To provide indirect vision To retract lips, cheeks, and tongue To reflect light into the mouth. Accurate image from flat surface mirrors, image magnified with concave mirrors .Stainless Steel. Fog free with Flat/round ribbed handle. The mirror shall be made of fiber glass and the handle shall be made of stainless steel 410/420 grade Sizes 1.6mm/siAn otoscope is a tool which is used to examine structures ofthe ear,particularlytheexternalauditorycanal,tympanicmembrane and middle ear. ENTdepartment. TECHNICAL 2.TECHNICALCHARACTERISTICS Atleast2.5VXenonorhalogenlightsource. Shouldbeconvenientpockettypeotoscope. Swivellingviewingwithatleast3Xmagnification. Shouldbeabletodetachtheotoscopehead. Shouldprovidenoreflectionsandobstructions. Shouldprovidedetachableaccessoriesofvarioussizes. Shouldhaveinbuiltrechargeablebattery.Recharge should be possible with direct mains supply. Setofplasticspecula,varyingdiametersbetween2.0and5.0 mm Two spare bulbs Atleastn.10reusable(autoclavable)otoscopespeculaforeach one stem) of the following measure: 2, 3 and 5 mm03years,includingallsparesandcalibration. Shouldprovide2sets(hardcopyandsoftcopy)of: User,technicalandmaintenancemanualsshouldbesuppliedin English/Hindi language along with machine diagrams. Each 2.00 297891.00 595782

23 Item-23 TRACHEOSTOMY SET. 1 Ribbon Right Angled Retractors 2 2 Cricoid Hook Blunt & Sharp 2 Each 3 Tracheal Dilator Small & Large 2 Each 4 Metallic suction tube 2 5 kelly forceps 3 6 Adsons forceps toothed and non toothed 4 7 Straight scissors 3 8 Curves scissors 3 9 BP handle no 3, 4 5 6 10 Needle holders 2 Each 1.00 53014.50 53015

24 Item-24 TUNINGFORK SET. Description:L-ShapedtongueSpatulaused to depress the tongue to allow for examination of the mouth and throat Material:madeofrustproofpremiumquality Stainless Steel Length: 5 to 6 inches approx. with varying sizes for pediatric and adult use. Packed in set of 5 pcs, re-usable and autoclavable Each 5.00 2120.58 10603

25 Item-25 OTO ACOUSTIC EMISSION (OAE) OAEANALYZER. 1. Both DP and TE OAE in diagnostics mode 2. DP OAE: 1.5 to 12 kHz, with at least 3 customizable protocols to choose frequencies 3. TE OAE: 0.7 to 4 kHz with at least 3 customizable protocols 4. Store minimum 500 results with software to transfer data to PC 5. Wireless printing facility. 6. May have Impedance audiometer and ABR instruments from the same company for ease of maintenance and servicing. Each 1.00 736312.50 736313

26 Item-26 OPTHALMOSCOPE-DIRECT. 1. Both DP and TE OAE in diagnostics mode 2. DP OAE: 1.5 to 12 kHz, with at least 3 customizable protocols to choose frequencies 3. TE OAE: 0.7 to 4 kHz with at least 3 customizable protocols 4. Store minimum 500 results with software to transfer data to PC 5. Wireless printing facility. 6. May have Impedance audiometer and ABR instruments from the same company for ease of maintenance and servicingHandheldophthalmoscopesdesignedforexaminingtheeye (mostlythe back of the eye, the funds) by providing a non invertedimageofthe eye. The instruments usually consist of alightsourcetoprojectthelightintotheeyethroughthepupil, a mirror, and a wheel of lensesof varying strength to provide a magnified view of the eye and to adjust the focus of the view. They produce an upright, or un reversed, magnified image of the eye, at approximately 15 times magnification. Directophthalmoscopesareusedmainlytodetecteye conditionsoreyediseases. vailablewithLED/Halogenlightsource. Magnificationuptox15fromdirectvisiontomaximum magnification. Red-free,blueandpolarizationfiltersandAnti-reflection lens. Shouldhavesmallandlargespotsizes,fixation targets,slitaperture,hemi-spotandcobaltbluefilter. Should be rechargeable battery with Charger / battery/ mainsoperated. Atleast3aperturesandfixationstar. Range of lenses not smaller than -30D to +20D with steps notgreater than 1D. Dustfreesealedopticsandasphericalopticalsystem220+/-10%VAC,50Hz Internalbatteries,rechargeablepreferredcompatiblewith both 2.5 V and 3.5 V batteries or handles provided; Led displayindicatingthechargingstatus. Yes Bulb–2nos Capableofoperatingcontinuouslyinambienttemperatureof -10 to 60 deg C and relative humidity of upto 90% in idealcircumstance3years,includingforallsparesandcalibrationwork. 10.DOCUMENTATION Shouldprovide2sets(hardcopyandsoftcopy)of: User, technical and maintenance manuals should be suppliedinEnglish/Hindi/Regional language along with machine diagrams. Each 1.00 174358.80 174359

27 Item-27 SLIT LAMP. Ophthalmic diagnostic instruments designed for examining the eye (mostly the anterior part of the eye) using an illumination system combined with a binocular microscope. Theinstrumentsusuallyconsist of illumination sources with a mechanism that provides aslit beam of light into the eye with different types of illumination (e.g., direct or indirect, focal or diffuse, background illumination), a binocular microscopeforviewingthemagnifiedslitimage,andacontrol componentforadjustingthefocusofthemicroscopeandthe slit (e.g., slit rotation, slit width); some also have refraction mirrors to direct light to a camera mounted above the microscope. Slit lamps provide a magnified view of eye structures OphthalmologyDepartment TECHNICAL 2.TECHNICALCHARACTERISTICS ShouldhaveLEDwithadjustableandgoodillumination. Should have facility for applanation tonometer if required. Typeofmicroscope:Binocular Should have 3 step magnification and total magnification is greater than 10x. Shouldhaveslitwidth≥0-10 mm,adjustable. Shouldhaveslitlength≥0-10mm,adjustable. Shouldhavestandardfilters:Minimum: blue,green(red- free), heat absorption. A broader selection of filters increases the functionality of the slit lamp. Rotationisbetween0-180°. Shouldbesuppliedwithmotorizedtable. Shouldhavealongitudinalmovementofatleast 90mm Shouldhave a lateralmovementofatleast95mm Each 1.00 200277.00 200277

28 Item-28 RETINOSCOPE SLEEK. 1. Should have an external focusing sleeve which is easy to grip and manipulate. 2. Should have crossed-linear polarizing filter. 3. Should allow one-hand operation for streak focus and 360º streak rotation. 4. Should be interchangeable to plane mirror and concave mirror mode by sleeve movement 5. Should have halogen / LED light source. 6. Should have 100% dust proof housing and multi-coated optics. 7. Should have brow rest for spectacle wearer. 8. Should be rechargeable battery with Charger. 9. Should have a carrying case. 10. If halogen lamp is used, then the following additional accessories should be supplied. a. Bulb – 2 nos. Each 1.00 184961.70 184962

29 Item-29 PERIMETER. General features Intensity of light : 0 – 10,000 ASB Stimulus Duration – 200 msec Stimulus wavelength – Broad band visible light Bowl testing distance – 30 – 33 cm Electrical requirement – compatible with domestic electric supply Test pattern Threshold Test Library I Central test pattern : 10 – 2, 24 – 2, 30 – 2 and Macula ii. Peripheral field test pattern: 60 – 4 and Nasal step iii. Threshold test pattern: Sita standard, Sita Fast, Full threshold and Fast pac Screening Test Library I Central field pattern 0ii. Peripheral field pattern iii. Screening test strategy iv. Screening test modes Special test library iStimulus / background color :white on white, red or blue on white, blue on yellow (short wavelength perimetry) ii Users Features i. Fixation monitor – Heijl / Krakau Blind Spot monitor, Gaze Tracking and Video Eye Monitoring Capability. ii. Operator Interface – LCD monitor with touch screen or keyboard operability iii. Pupil size measurement – Automatic iv. Printer – Table mounted laser printer or thermal printer v. Patients data entry – Name, DOB, ID, Trial Lens, Visual Acuity, Pupil size vi. Data storage facility – should be available. Each 1.00 1531530.00 1531530

30 Item-30 IOL OPERATION SET. Ophthalmic Instruments Set includes Following Items: Barraquer Wire Speculum , Large Suture Tying Forcep , Curved McphersonForcep , Angled Mcpherson Corneal Forcep , 1 X 2 Teeth Superior Rectus Forcep Wills Hospital Utility Forcep Castroviejo Corneal Scissor , Universal VannasCapsulotomyScissor , Angled Westcott Stitch Scissors Barraquer Needle Holder , Micro W/O Lock Hartman Mosquito Forcep , Straight Hartman Mosquito Focep , Angled Rycroft Air Injection Cannula Simcoe I/A Cannula Bard - Parker Handle Phaco Chopper Sinsky Hook Weber Lens Loop Smith Lens Expressor Sterilization Box Each 1.00 347963.62 347964

31 Item-31 A-SCANBIOMETER. A-ScanBiometer Should be CE/FDA/BIS approved model. Manufacturer should be ISO 13485 certified. Technical Specification: Frequency-10MHz, built in fixation LED with flexible cable. Contact and immersion method Should have large liquid crystal graphic display with back light. Measurement: Axial length measurement ranged from 15mm to 38mm, clinical accuracy of ±0.1mm Simultaneously shows the axial length, anterior chamber depth, lens thickness, and A-Scan waveforms in real time. Resolution : 0.01mm Measurement : Auto/manual Should function with lens type – normal, cataract, dense cataract, Pseudophakic, acrylic/PMMA/Silicon An audible signal to the operation Cursor to measure the user desired waveform positions. Can be used with specific velocity setting for a wide choice lens material and different segments. Maximum patients data storage should be of 100 patients and more With high speed thermal printer with user programmable print format. IOL Power Calculation formulas: SRK T, SRK II, Binkhorst I, Holladay and hoffer Q, Auto select desired formula for the appropriate axial length. IOL user programmable configuration: 25 programs Techniques of Axial length Measurement: Contact & Immersion mode Real time clock Power supply: Should work on 220-240VAC with mains adapter. Each 1.00 1041440.40 1041440

32 Item-32 KERATOMETER. Ophthalmic measuring instruments designed for objectively determining the curvature of the anterior corneal surface and the refraction of the eye (e.g., diopter, cylinder axis) by projecting illuminated images onto the patient’s cornea. The instrumentsusuallyconsistoflightsources,apairofobjectsto be projected onto thecornea, a telescope with prisms and lenses for reflecting and observingimages, a device for adjusting the positions of the reflected images,andthe software appropriate to calculate the corneal curvatureand the refractive power. Ophthalmometers are used mainly for preassessmentforrefractivecornealsurgeryandforcontact lensfitting.Should have(15x/ 10x)eye piece. Shouldmeasurecornealrefractivepowermeasuring range from36 to 52 D in steps of 0.25D steps. Should measure corneal radius of curvature measuring range from 6.5 to 9.4 mm in steps of 0.05mm. Shouldhavehighaccuracyofmeasurements. Shouldhavedustcoverandsparebulb. Shouldbesuppliedwithmotorizedtable. Shouldhavewellilluminatedcircularmireswith+sign.220+/-10%VAC, 50Hz No NA Tobespecifiedbyserviceprovider Lamp(12v10w): 5No CalibratingDevice–1No Each 1.00 1163962.80 1163963

33 Item-33 AUTOREFRACTOMETER. Ophthalmic measuring instruments designed for objectively determining the curvature of the anterior corneal surface and the refraction of the eye (e.g., diopter, cylinder axis) by projecting illuminated images onto the patient’s cornea. The instrumentsusuallyconsistoflightsources,apairofobjectsto be projected onto thecornea, a telescope with prisms and lenses for reflecting and observingimages, a device for adjusting the positions of the reflected images,andthe software appropriate to calculate the corneal curvatureand the refractive power. Ophthalmometers are used mainly for preassessmentforrefractivecornealsurgeryandforcontact lensfitting.Should have(15x/ 10x)eye piece. Shouldmeasurecornealrefractivepowermeasuring range from36 to 52 D in steps of 0.25D steps. Should measure corneal radius of curvature measuring range from 6.5 to 9.4 mm in steps of 0.05mm. Shouldhavehighaccuracyofmeasurements. Shouldhavedustcoverandsparebulb. Shouldbesuppliedwithmotorizedtable. Shouldhavewellilluminatedcircularmireswith+sign.220+/-10%VAC, 50Hz No NA Tobespecifiedbyserviceprovider Lamp(12v10w): 5No CalibratingDevice–1NoMeasuringinstrumentsusedtodeterminetheratioofthevelocityof light in a vacuum to the velocity of light in another medium (i.e., indexof refraction) Shouldhaveinthesystem. Shouldhaverefractivemeasurementspherefrom-25to +22Dinstepsof0.25D. Each 1.00 796395.60 796396

34 Item-34 APPLANATION TONOMETER. Ophthalmic tonometer’s designed to determine intraocular pressureby measuring the force required to flatten the cornea apex by afixed amount. These instruments are typicallysmallandreusableinstrumentsandareattachedto a slit lamp; the tonometer includes a tiptobeappliedtothe corneaandamanuallycontrolledspringthatappliesa variableforceonthecorneathroughthetip. OphthalmologyDepartment TECHNICAL 2.TECHNICALCHARACTERISTICS RangeofMeasurement0-80mmHg MovementofLightCircle1.53 x2 =3.06mm PrismDiameter7mm PrismRangeofMovement3mm Shouldbecompatiblewithallmodelsofslitlamps. Manual Inbuilt 3.PHYSICALCHARACTERISTICS NA NA NoiseFreeSystem Should maintain nominal temperature and the heat should disbursedthrough a cooling mechanism. Portable 220+/-10%VAC, 50Hz Calibration Bar, Prism TonometerMountbasetofixwithoptics.Warranty 03years Flash autoclave is used for routine sterilizatio Each 1.00 275675.40 275675

35 Item-35 OPHTHALMIC TABLE. Technical Specifications 1. Should have microcontroller or microprocessor based control and operating system 2. Should have controls from multiple locations 3. All movement of chair should be adjusted with control switches 4. Should have chair zero position 5. Should have telescopic drawer for trial lens set 6. Should have minimum two instrument table 7. Should have side top with telescopic drawer 8. Should have ophthalmoscope stand and indirect ophthalmoscope stand 9. Should have foot switch for chair adjustment 10. Should have head rest on chair 11. Should have an adjustable foot rest 12. Chair rotating should be 0-180 degree 13. Chair reclining should be 0–170 degree 14. Seat height should be UP movement 700 mm and Down movement 500mm 15. Weight carrying capacity up to 150+/-10% 16. Chair unit should be available with left and right hand side 17. Chair unit available with different colors 18. Should supply the following accessories along with refraction unit A. Ophthalmic surgeon’s chair with foot control for doctor B. Trial lens set –in Wooden Box C. LED vision chart (ETDRS, Snellen, English, Regional Language, etc) 19. Should be operated with 230V/50 Hz supply Each 1.00 440799.40 440799

36 Item-36 DENTAL UNIT WITH MOTOR FOR DENTAL OPD. Examination/treatmentchairsdesignedtofacilitatedental examination,treatment,and/orminorsurgicalprocedures. Thesechairs are typically adjustable up to a height that allows the healthcare staff to perform procedures while standing; the chairsusually include head and armrests, a reclining back that may be tilted from a vertical to a horizontal or near-horizontal position, and rotating capabilitiestofacilitateexaminationand/ortreatment.Technical characteristics (specifictothistypeof device) It should have double articulating headrest with seesawmovement. Itshouldbeprovidedwithsoftcervicalsupport. Dental unit should have latest overhead delivery system. It should have two 3 way syringes (Tip autoclavable, with spare tips) one on unit side and other on the assistant side. It should have two high speed Air rotor terminals with tworotorhandpiecesandaccessoriesandoneterminal for fiber optic. One for air motor/micro motor having straight and contra angle hand pieces and other for air rotor terminal with two air rotorhand pieces with two sparecartridges. ItshouldhaveLEDlightcureunitwithminimumintensity 1200 mW/cm2. It should have infection control system with non- retraction valves (Bio system/equivalent). Allhandpieces/terminals shouldbekept onAutoclavable pads.8 spare autoclavable pads should be supplied. Armofunitshouldbepneumaticallylocked. Allair tubingofthedeliverysystemcanbedisinfected internallyafter every dental procedure. Itshouldhaveoneinbuiltpiezoultrasonicscalar(max frequencyshould be 36 kHz) Removableauxiliarytray(autoclavable)shallbe supplied–10sets. It should have integrated latest foot operated LED light (30000 - 50000 Lux). It should have rotatablewater system with removable spittoon. It should have Medium Vacuum Suction and high suction(MotorizedSuction). Shouldhavefollowingmultipleprogram Twoprogrammableworkingpositions. SplittingandlastworkingpositionwithlightON and OFFautomatically. Return to Zero position with light OFF automatically. Itshouldhaveemergencystopcontrolwith luminousindication. Programmablebowlwaterandcupfillerwater. ItshouldhaveLEDbasedX-rayviewer(For I.P.G/O.P.G films). Itshouldbeprovided with rightarm. It shouldhavemulti-functionalfootcontrolbase. Itshouldbeprovidedwithtwostoolswithadjustable backresttiltincludinganadjustableringforfootrest Oil free medical grade compressor of 1HP (fully imported)220+/-10%VAC, 50Hz No Stabilizerorinbuiltprotectiontovoltagefluctuation/current surge. Tobespecifiedbyvendor. 5.ACCESSORIES,SPAREPARTS,CONSUMABLES LEDLIGHTCAREUNIT: Ensuresupto1200mW/sq.cm ULTRASONICSCALAR: PiezotronicsScalarwithfrequencyof28000-36000Hz Autoclavablehandpiece,TotalcontrolisMicroprocessor based HandPiecesmostsleek. The scalar supplies with: Piezotronics scalar with 4 tips. FOOTOPERATEDLIGHT: LEDlight with3intensitywith3axis movement. Intensityisbetween30000-50000Lux On/offSwitchbysensorswitch-nontouch. Stepintensitycontrolbynon-touchsensor. AIRROTOR: AirRotorhand Each 1.00 416576.16 416576

37 Item-37 DENTAL CHAIR. Electrically Operated Dental Chair Seamless Rexine without any Stitching Chair Mount Unit fitted with: a) Faro LED operating Light b) High and Low vacuum Motorized Suction c) White transparent glass /Porcelain spittoon detachable d) STAINLESS STEEL INSTRUMENT TRAY for keeping instruments. e) LED X-RAY VIEWER f) Monitor mounting arm with HD Monitor Modular fitted with: a.AIROTORCONTROL with standard head airotorhandpiece 1 No b.MICROMOTOR Micromotor with digital display of speed with 35,000 rpm Straight Handpiece autoclavable -1 No ContrangleHandpiece autoclavable -1 No c. 3 Way Syringe for Air , Water & Spray 2 Nos one for Doctor and one for Assistant DENTAL OPERATOR’S STOOL: Surgical Stool, moving on 5 castors, well balanced, freely movable. The seat and Back-rest are PUmoulded. Height Adjustment by Pneumatic piston. Flash autoclave Main Features Sterilization Class : CLASS B Sterilization Temperature : 121°C,134°C Special Program : HIV, HBV long-sterilization program Dry System : Vacuum drying system Display : High-light LED tube display Testing System : Bowie&Dick Test, Vacuum Test, Helix Test Control Precision :Temperature: 1°C, Pressure: 0.1bar Sterilization Data : Optional Mini printer Safety System : Relief valve, Hand lock door, Pressure or temperature over load protection & Alarm system Water Supply System : Build-in water tank easy to clean Cubage: 3.5 or 4L Tray Holder : 5 layers tray holder with 3 trays Chamber : Medical stainless steel 304 Max working pressure : 2.3bar Min working pressure : 0.9bar Max temperature : 145°C Operation Temperature : 5~40°C Noise : <50db Each 1.00 29405.38 29405

38 Item-38 FLASH AUTOCLAVE. Flash autoclave is used for routine sterilization of the instruments, also more suitable for emergency sterilization. This is widely used for various uses in the medical industries especially for eye, dental and laboratories for various sterilization purposes. OperationTheatre TECHNICAL 2.Technicalcharacteristics 1. Outer case of the unit should be made up of stainless steel (MS-304) and the unit should be based on microprocessor automatic system from adding water to sterilization and dry cycle. 2.Chambercapacityshouldbeatleast25Lormore. 3.Machineshouldperformpreandpostvacuumfunctions. 4. Machine should have program selector to perform leakage, helix,priorpresettestandthefacilityofinternalwatertankwith auto chamber fill. 5. Machine should have emergency reset buttons and selectable dry time 0-60 min and have auto cut off feature for voltage surge protection. 6. Should have a low water indicator feature to indicate water status and to avoid overheating and digital display of temperature. 7. It should have a high vacuum ejector to ensure effective air removal for effective steam penetration and Each 1.00 686125.44 686125

39 Item-39 OPERATION TABLE ELECTRIC MAJOR. An operatingtable, sometimes called operating room table, is the table on which the patient lies during a surgicaloperation.This surgical equipment is usually foundinsidethesurgeryroomofahospital. Should have OT Table type base made of high quality304stainlesssteelwithdoubletable,split leg type andcan take x ray photography. ShouldhaveimportedYtypesealingringwith goodsealing performance and durability. Should havea Rotarybrake devicewhich is easy for moving operating table. Baseisstainlesssteel. Legboardisseparated&dischargeable. Incliningforward ≥30° Incliningbackward≥25° Incliningleftward≥20° Incliningrightward≥20° Backboardfoldingupward≥45˚Folddownward≥90° HeadBoardfoldingupward≥80°Folding downward ≥10° LegboardFoldingdownward≥90°. Foldoutward≥90°. Waistboardelevation≥120°. The table top must be made of durable radiolucent Bakelitematerialcapableofwithstandingexposure to frequentC-Armimaging,withoutdiminishingthe imageclarity220+/-10%VAC,50 Hz Yes NA Asspecifiedbymanufacturer 5ACCESSORIES,SPARE PARTS,CONSUMABLES Shouldersupport(1pair) WaistSupport(1pair) Armrest(1pair) Legholder(1pair) ScreenFrame(1Piece) FootPlate(1Pair) Warranty 03years Each 2.00 441080.64 882161

40 Item-40 OPERATION TABLE HYDRAULIC MINOR. Operation Table Hydraulic 1. The company shall be ISO certified. Please submit the valid ISO certificate. Technical specifications: It should be Five sectional, SS top 304 grade O.T. Table. It should be hydraulically driven It should have Leg section removable and adjustable. It should have Base, main frame, fittings and accessories made of Stainless Steel. It should be Rust Proof design. It should have Quick and efficient floor locking and controlled. Overall Length of Table top should be: 1800- 1950 mm. Overall width of Table top should be: 500- - 550 mm. should have following: - Min. Height: 750-770 mm. Max. Height: 1000-1020 mm Trendelenburg: 20.0 deg Reverse Trendelenburg: 18.0 deg Lateral Tilt: 18 0 deg Chair: 75 0 -80 0 deg Flex / Reflex: 25 0 / 210 0 deg It should be Supplied with following accessories (S.S.) Antistatic rubber mattress – One set. S.S. Top Arm board – One Pair. Anesthetic Screen – One Pc. Shoulder Support Padded – One pair. Lateral Support Padded – One pair. Geopal type lithotomy crutches – One pair. Each 2.00 134774.64 269549

41 Item-41 ELECTRO CAUTRY. Operation Table Hydraulic 1. The company shall be ISO certified. Please submit the valid ISO certificate. Technical specifications: It should be Five sectional, SS top 304 grade O.T. Table. It should be hydraulically driven It should have Leg section removable and adjustable. It should have Base, main frame, fittings and accessories made of Stainless Steel. It should be Rust Proof design. It should have Quick and efficient floor locking and controlled. Overall Length of Table top should be: 1800- 1950 mm. Overall width of Table top should be: 500- - 550 mm. should have following: - Min. Height: 750-770 mm. Max. Height: 1000-1020 mm Trendelenburg: 20.0 deg Reverse Trendelenburg: 18.0 deg Lateral Tilt: 18 0 deg Chair: 75 0 -80 0 deg Flex / Reflex: 25 0 / 210 0 deg It should be Supplied with following accessories (S.S.) Antistatic rubber mattress – One set. S.S. Top Arm board – One Pair. Anesthetic Screen – One Pc. Shoulder Support Padded – One pair. Lateral Support Padded – One pair. Geopal type lithotomy crutches – One pair. Electrocautery, also known as thermal cautery, refers to a process in which a direct or alternating current is passed througharesistantmetal wireelectrode, generating heat. The heated electrode is then applied to living tissue to achieve hemostasis or varying degrees of tissue destruction.1.Theunitshouldbemicroprocessorcontrolledelectrosurgery unit with a LCD/LED digital display having a touch screen preferably. The display visual indicator for the actual power being delivered. 2. The unit should haveprecise monopolar and bipolar modes for fine and microsurgery applications and should be capable of using very less voltage for precise applications. 3. The unit should have a universal socket for bipolar, monopolar for neutral output socket along with multifunctional socket for vessel ceiling based on plug and play mechanism. Each 1.00 520720.20 520720

42 Item-42 SHADOWLESS LED CEILING TYPE MAJOR. Each 2.00 220540.32 441081

43 Item-43 SHADOWLESS LED CEILING TYPE MINOR. Luminescenceshadowlesslampadoptslightsources different positions for focus to eliminate shadows of different parts of medical workers. OperationTheaterTECHNICAL .TECHNICALCHARACTERISTICSDoubledomeIntensityControlin9stepsforindividualdomesHeightAdjustment:600mmActionRadius:1850mmPossibleMovements:Radial,Angular&AxialColourTemperature:4500Kandabove LEDtechnology:minimum40,000hourslamplifeIntensity,brightness,contrastandpowerswitchtobe made available on handle/wall-check.Focaldistance(d1+d2)=0.8to1.2mTemperaturerisesonthekeepofsurgeriestobeless than 10° CR±approx.95ormore360°rotationforboth armsManualHeatDissipation:Shouldmaintainnominaltemperature and the heat should be disbursed through an coolingmechanism4.1PowerRequirements220+/-10%VAC, 50Hz4.2BatteryoperatedYes 4.3ProtectionNA4.4PowerconsumptionAsspecifiedbymanufacturer Each 2.00 161729.54 323459

44 Item-44 SHADOWLESS LAMP STAND MODELV METAL. 5.ACCESSORIES,SPAREPARTS,CONSUMABLES 5.1 Accessories(mandatory, standard, optional) Spareparts(mainones) Consumables/reagents (open,closedsystem) NA 6.ENVIRONMENTALANDDEPARTMENTALCONSIDERATIONS 6.1 Atmosphere/Ambiance (air conditioning,humidity,dust...) Capable of operating continuously in ambient temperatureof-10to60degCandrelativehumidityof upto 90%. 6.2 User'scare,Cleaning, Disinfection & Sterilityissues Easytocleanandmaintain. Warranty 3 years Luminescenceshadowlesslampadoptslightsources different positions for focus to eliminate shadows of different parts of medical workers. OperationTheatre TECHNICAL 2.TECHNICALCHARACTERISTICS Singledome minordome IntensityControl:continuous(1,00,000Lux) HeightAdjustment:600mm ActionRadius:1850mm PossibleMovements:Radial,Angular&Axial ColourTemperature:4500andabove Each 3.00 22054.03 66162

45 Item-45 FOCUS LAMP ORDINARY. Light type- Super Bright LED Light with 2500 Lumens LED collimated with lensfor deep penetration of the light. Ideal for suturing in the treatment room. Height Adjustable to suit treatment room and examination purpose. Angle of illumination Adjustable in any direction by the flexible swan neck arm. Light can be focused at eye level for suturing . Mobility mobile on castor wheels. Each 2.00 22054.03 44108

46 Item-46 SUCTION APPARATUS ELECTRICAL. Shouldbedesignedfordrainingbloodandother fragmented secretions in emergency settings. Should be operable both electrically and foot operated during non-availability of electricity. Shouldbefittedwithoilimmersednoiselessmotorized vacuum pump. Cabinetshouldbemadeofstainlesssteel(MS-304). Should have two lightweight, clear glass or unbreakable polycarbonate Jar on the top having minimumcapacityof2Ltreachfittedwithrubberairtight lids and having overflow safety device. Shouldhaveamotorofminimum½HPcapacitysingle phase 1440 RPM with control knob. Shouldhavevacuumatleastbetween100mmHgtoat least 575 mm Hg ± 10 regulable with vacuum control knob. Shouldbemountedon4castorwheels, nylon material,heavyduty,movableinalldirections.220+/-10%VAC, 50Hz Capableofoperatingcontinuouslyinambienttemperature of -10 to 60 deg C and relative humidity of upto 90% in ideal circumstances. 03 years PreventiveMaintenancevisitsatleastonceineach quarter. Each 2.00 42637.79 85276

47 Item-47 SUCTION APPARATUS FOOTOPERATED. Should be operable foot operated during non-availability of electricity. Shouldbefittedwithoilimmersednoiselessmotorized vacuum pump. Cabinetshouldbemadeofstainlesssteel(MS-304). Should have two lightweight, clear glass or unbreakable polycarbonate Jar on the top having minimumcapacityof 1Ltreachfittedwithrubberairtight lids and having overflow safety device. Shouldhaveamotorofminimum½HPcapacitysingle phase 1440 RPM with control knob. Shouldhavevacuumatleastbetween100mmHgtoat least 575 mm Hg ± 10 regulable with vacuum control knob. Shouldbemountedon4castorwheels, nylon Capableofoperatingcontinuouslyinambienttemperature of -10 to 60 deg C and relative humidity of upto 90% in ideal circumstances. 03 years PreventiveMaintenancevisitsatleastonceineach quarter. Each 3.00 13477.46 40432

48 Item-48 ULTRAVIOLETLAMP PHILIPS MODEL 4 FEET. Light source: UV  Wave length: min two 254mm, 366mm  Power source: 12 AC/DC  Chamber: well closed, to hold TLC plates 20 x 20cm & 20 & 10 cm size.Light source: UV  Wave length: min two 254mm, 366mm  Power source: 12 AC/DC  Chamber: well closed, to hold TLC plates 20 x 20cm & 20 & 10 cm size. Each 1.00 7351.34 7351

49 Item-49 UPS FOR OT 20 KVA. Technical specification for 20kva ups systems Technical Parameters Specification Input Voltage Range 400 - 440 V AC (three Phase) Frequency Range 46 to 54 Hz Phase Single Phase Power Factor 0.99 to unity. Output Voltage 230 VAC, Voltage Regulation + /- 1% Frequency (Synchronised Range) 46 - 54 Hz Harmonic Distortion (THD) < 3% (linear load) and < 5% (non-linear load) Output Waveform Pure sine wave Crest Factor 3:1 Efficiency (AC - AC) > 90% Power Factor 0.9 Overload capacity 120 % for 10 minutes and 150% for 1 minute Battery Type: 12 V VRLA Sealed Maintenance Free Batteries, VAH Required for 60 Minutes Battery Bank Single Battery bank only. Charger Built-in solid state float-cum-boost charger with automatic boost / trickle charge modes with current limiting features. Transfer time 0 ms LED/LCD display . Operating Temperature 10 to 45 Deg. C for UPS System Relative Humidity 10 - 95% RH, Non Condensing Noise level Audible Alarm for Mains Failure alarm, Low Battery Alarm and Overload Protections. Advanced electronic protection for device safety backed with MCBs Fast acting fuses, High speed pulse blanking Electronic overvoltage / under voltage and should have. Bypass Static Bypass. Each 1.00 963842.88 963843

50 Item-50 BINOCULAR MICROSCOPE. Ophthalmic diagnostic instruments designed for examining the eye (mostly the anterior part of the eye) using an illumination system combined with a binocular microscope. Theinstrumentsusuallyconsist of illumination sources with a mechanism that provides aslit beam of light into the eye with different types of illumination (e.g., direct or indirect, focal or diffuse, background illumination), a binocular microscopeforviewingthemagnifiedslitimage,andacontrol. TECHNICAL 2.TECHNICALCHARACTERISTICS ShouldhaveLEDwithadjustableandgoodillumination. Should have facility for applanation tonometer if required. Typeofmicroscope:Binocular Should have 3 step magnification and total magnification is greater than 10x. Shouldhaveslitwidth≥0-10 mm,adjustable. Shouldhaveslitlength≥0-10mm,adjustable. Shouldhavestandardfilters:Minimum: blue,green(red- free), heat absorption. A broader selection of filters increases the functionality of the slit lamp. Rotationisbetween0-180°. Shouldbesuppliedwithmotorizedtable. Shouldhavealongitudinalmovementofatleast 90mm Shouldhave a lateralmovementofatleast95mm. Shouldhaveaverticalmovementof at least30mm. Shouldhavea chinrestvertical movementofatleast 220+/-10%VAC, 50Hz FocusingTestrod&dustcover; Slit lampdust cover, Rack,manualandmotorizedguard, 90D/70DLensWarranty 03 years PreventiveMaintenancevisitsatleastonceineach quarter. Each 2.00 57340.49 114681

51 Item-51 BALANCE (ELECTRICALMONOPAN). Technical Specifications: (a) Capacity: 200g (min.), (b) Least Count (LC)/Readability: 1mg, (c) Repeatability: 1mg, (d) Linearity – +/- 2mg, (e) Setting Time (Max.): 1.5 Second, (f) Adjustment: Fully Automatic Time and Temperature Controlled Internal Adjustment system, (g) Display: 7" (min.) Colour TFT Touch screen Display unit, (h) Weighing Pan Dimension (L x B) (min.): 120mm x 120mm, (i) Connectors: RS232, USB, Ethernet(LAN), Bluetooth (j) Password protected, Direct connection with PC for easy data transfer (no software needed), (k) Power Supply: 220VAC, single phase (l) Pan Material: Die Cast Aluminium/SS304/SS316, . (m) Mono Bloc weighing cell and overload protection, (n) Sample ID input facility should available to provide traceability, (o) Level Control & Level Loc. Each 1.00 22131.45 22131

52 Item-52 SIMPLE BALANCE. Automatic adjustment with internal weights, Enclosed pan, dual side sample loading facility, Multiple unit display mode (SI units), digital display, Display and balance should be a single unit. Maximum Capacity:250 g + 30g Minimum load: 1 mg Readability:0.1 mg Pan diameter:70-100 mm Working Temperature: +10 C to 40 C Stabilization time maximum: 6 sec + 1s Display: LCD digital control multiunit’s with six decimal (gram and milligram) Calibration: Automatic Free height above weighing pan: 25 to 30 cm Tare range: Over all ranges of Weight Analytical weighing boat: Made up of Aluminium and Diameter of 1 cm, 1.5cm, 2cm, 2.5cm, 3cm, 4 cm respectively. Each 1.00 22399.69 22400

53 Item-53 ECG MACHINE 12 CHANNEL.Electrocardiographs,multichanne Continuously detect, measure and display a patients echocardiogram(ECG)throughleadsandsensorsattachedto the patient. Simultaneous6ChannelECGrecordingwith12lead simultaneous acquisition. Shouldhaveadigitaldisplayof6channelECGand should have three modes (Automatic, Manual and rhythm). Heartratemeasurementrangetobeatleast30bpm to 250 bpm, with accuracy better than ± 5bpm. Heartratetrenddisplayofatleastprevious24hours. Arrhythmiadetectionfacilityrequired;minimum gradation of 1 bpm.Shouldmaintainnominaltemperatureandtheheatshouldbe disbursed through a cooling mechanism 220V±10%,50Hz Battery powered, silence able alarm for power failure. Batterychargertobeintegraltomainspowersupply,andto charge battery during mains power operation of unit. Internal,replaceable,rechargeablebatteryallowsoperation for at least one hour in the event of power failure.12leadECG cable. 2setsofsparefuses(ifnon-resettablefusesareused) 5 tube electrode gel (if requiredCapableofoperatingcontinuouslyinambienttemperatureof- 10 to 60 deg C and relative humidity of upto 90% in ideal circumstances ShouldbeCDSCO approved. ShouldcomplywithBISstandards. ShouldcomplywithUSFDA/EuropeanCEstandardsincase of non-availability of BIS standards. ShouldconformtoISO13485qualitystandards. ShouldconformtoIEC60601-1Generalrequirementsof electrical safety standards. 03 years PreventiveMaintenancevisitsatleastonceineach quarterShouldprovide2sets(hardcopy)of:- User, technical, maintenance and service manuals to be supplied alongwithmachine diagrams. List of equipment and procedures required for local calibration androutinemaintenance. Certificateofcalibrationtobeprovidedbythe manufacture Each 3.00 153153.00 459459

54 Item-54 STANDARD WEIGHING SCALE. ALL IN 1. Weighing scale with height and weight measurement. Each 3.00 31219.65 93659

55 Item-55 3rd Party Charges at 1% Ls 1.00 193108.00 193108

56 Item-56 Miscellaneous and rounding off Ls 1.00 7563.89 7564

Estimate for Laboratory, Surgical & PMR Equipments for Kampli New 100 Beds Taluka Hospital, Under 2515 KKRDB Macro for the year 2024-25. (PWD/2025-26/IND0203)

SL. No. Item Code Item Name Unit Scheduled Quantity Unit Price Rs. Amount Rs.

1 Item-1 HOTPLATES . 1. Should be microprocessor controlled. 2. Chemical resistant hot-plate made of Ceramic-glass plate which is extremely resistant to corrosion and easy to clean. 3. Temperature range up to 300°C adjustable in 5 degree increments 4. Hot-plate dimension not less than 140mm of diameter or 140x140 mm (if the plate is not circle shape). 5. Digital real-time display for set value and actual value with real-time monitoring of temperature via the LED display. 6. Over temperature protection system cuts off power to unit in overheat condition, protecting both user and sample. 7. Hot Top warning system protects from accidental burns with prominent display when heating surface is above 50°C 8. The equipment should be liquid ingression protected. 9. Each 3.00 2945.25 8836

2 Item-2 ROTOR/SHAKER Each 3.00 25155.24 75466

3 Item-3 COUNTING CHAMBER. Heavy duty, eight cell counter. Records up to 999 for each cell. It should have totalize that show the sum of all eight counters. Supplied with a protective case. Each 2.00 1130.98 2262

4 Item-4 PH METER. Portable digital pH meter. 2. Measuring range 0 to 14pH 3. Accuracy of pH ±0.1pH,MV±1mv 4. Temp. compensation should be automatic 5. Digital display LED/LCD 6. Sensor: pH electrode 7. Battery operated 8. The manufacturer should be ISO 13485 certified Each 2.00 20027.70 40055

5 Item-5 PAEDIATRIC GLUCOMETER/BILIRUBINOMETER. Determiningtheconcentrationofbilirubininthebloodor other clinical specimen, most commonly to rapidly assesshyperbilirubinemiainneonates.Samplevolumeof<100µLrequired,automatic calibration facility. Totalbilirubinconcentrationmeasurable(atleast)in range of 0 to 30 mg/dl. Timefortotalconcentrationmeasurement:≤ 5 seconds. Shouldhavefilters:455and575nm(±2%). Shouldhaveerrorratelessthan5%. Should haveresolution-0.1mg/dl. AutomaticcorrectionforHemoglobin. Measuringcell:DirectHematocritcapillaryreadings. heparinizedhematocritglasscapillary. Manualinterface. Backlitdisplaywitheasyviewinginallambientlight levels. Inbuiltsoftware. Convenientand quickUSBinterface. 3PHYSICALCHARACTERISTICS NA NA <60dB HeatDissipation: Shouldmaintainnominaltemperatureandtheheatshould be disbursed through ancooling mechanism. Hardandsplash-proofcasetobesupplied. Spare/replaceablefuses-2sets. Reagents andcapillarytubes sufficientfor minimum 100 tests. Reagentsandconsumablespertestshouldbe declared. Capillarytubes,haemofluorometricreagents(Warranty 3years Each 1.00 282744.00 282744

6 Item-6 GLUCOMETER 5 WITH 1000 STRIPS. Should be a hand held meter Should require no routine maintenance Should have reading range/linearity from 10 to 600 mg/dl Should have a maximum reading time of less than 10 seconds Should use electrochemical technology Should use a minimum blood sample less than 1.5µl Should have a LCD display Should have measuring unit in mg/dl. Should have wide operating temperature 10. Should have a minimum memory of 50 11. Should have life time replacement offer 12. Should have automatic code entry technique 13. Battery should be replaceable without using any tools. 14. Should have facility to ensure accuracy of measurementsShould be able to use capillary blood samples. Should have a minimum 4 months shelf life after opening the strip vial. All strips should have at least one year expiry date from the date of supply. 50 strips should be supplied along with the equipment. Strips should be available in the local market. Each 4.00 164934.00 659736

7 Item-7 HAEMOGLOBINOMETER 5 WITH 1000 STRIP. Haemoglobinometer is intended to be used for quantitative measurement of haemoglobin in fresh capillary or whole blood samples. Itshouldbeanautomated,integratedsystemand based on Photometry. Opensystem(preferably)withdirectread-outon LED/LCD display for estimation of hemoglobin. ShouldhaveLCDdisplayscreenandautoshutoff feature when not in use. Shoulddisplayresultsin g/dl. MeasuringRange0to25g/dl Shouldhaveautomaticcalibrationsystemfor maintaining accuracy of reading (<5%CV). Shouldhaverechargeablebatteries(3.6V). ShouldhaveUSBconnectivityinterfaceforPC and printer. Shouldbesuppliedwithautoinjectorpenand disposable lancets.b Strips 01year 10.DOCUMENTATION Shouldprovide2sets(hardcopyandsoftcopy)of: User,technicalandmaintenancemanualsshould be supplied in English/Hindi language along with machine diagrams; Certificateofcalibrationandinspection. Each 3.00 388773.00 1166319

8 Item-8 LAB AUTOCLAVES. Vertical double walled design having single chamber for steam and water working chamber made of stainless steel LM 304 grade of 2 mm thickness. Outer cover made stainless steel 1 mm thick lid, flange and bottom sheet also made of stainless steel. All joints of argon welded joint less silicon gasket. Heavy duty industrial flange heater, pressure range 15 – 20 PSI, Pid fitted pressure gauge 0-30 PSI, safety spring loaded pressure valve and steam release valve, foot lifting arrangement electrical 230/15A/50Hz. Temperature control microprocessor based digital display. Temperature sensor 121 to 125oC, Temp. resolution. Each 1.00 282744.00 282744

9 Item-9 REFRIGERATORS. 1.Minimum Gross storageCapacity :230 to 250 ltrs 2.Model Type :Double door 3.Voltage Range at 40degree centigrade Capable of working on 220 volts + 12 % A.C 50 Hz 4 .Power Source AC , 220 Volts to , 50 Hz 5.Method of Defrosting: Frost Free 6.Insulation : Puff / Maxi 2 / Polyurethane 7. Refrigerant Gas: CFC free 8.Compressor :Power saver compressor 9.Accessories Required : Adjustable shelves , chiller Tray , Temperature controller, Auto lamp On/off feature , should be supplied with all standard accessories as per manufacturer catalog for the model supplied 10. Warranty with 3 year Comprehensive Warranty 11. Stabilizer Should be supplied with 0.5 KVA capacities CVT without any extra cost. The CVT will also carry 3 years warranty. 12 Colours: Steel grey with metallic finish ( Metallic Color) The unit should comply with relevant IEC safety standards. Each 2.00 79437.60 158875

10 Item-10 BIO-SAFETY CABINET(CLASS-I). 1. It should be of vertical type airflow biosafety cabinet 2. Its horizontal size should be 1.2 meters (4 feet) with internal Work Area or at least (W x D x H) : 1220 x 580 x 660 mm 3. It must have an arm rest front armrest, raised above the workzone 4. It must have a Backlit LCD Display for simultaneously displaying inflow, downflow, sash status, airflowstatus, and filter life. Digital read-out with alpha-numeric display should indicate all input, status and alarm functions. 5. It should have an filter life display 6. Its tested opening should be of minimum 175 mm 7. Its average airflow velocity should be at least inflow: 0.45 m/s and downflow : 0.30 m/s 8. Its airflow Volume should be at least inflow: 345 cmh and downflow : 725 cmh 9. Its exhaust capacity should be at-least: 340cmh 10. It must have two ULPA filters with typical Efficiency of each :>99.999% at 0.1 to 0.3 micron, ULPA as per IEST-RP-CC001.3 USA>99.999% at MPPS, H14 as per EN 1822 EU 11. It must have two or more Blower for inflow and Downflow 12. It should produce low sound (Sound Emission NSF / ANSI 49 : 61.3 dBA, EN 12469 : 58.3 dBA) 13. Fluorescent Lamp Intensity (Lux) should be a minimum 1400 Lux 14. Cabinet main body should be made of at least 18 gauge electro-galvanized steel with white oven-baked epoxypolyesterIsocide antimicrobial powder coated finish 15. Its side walls should be made up of UV absorbing tempered glass, 5 mm (0.2"), colorless and transparent 16. For Microbiological, filteration and electrical Safety, Cabinets should meet most of the international standards 17. It should have an output port for remote monitoring of cabinet operating parameters. 18. Work area plates should be removable for autoclaving Each 1.00 306306.00 306306

11 Item-11 TAB BASED MICROSCOPE. • Upright bright field, digital benchtop microscope with inbuilt integrated tablet display (no eyepiece/ optional binocular head can be used), application and research grade optics • Patented detachable digital head with Internal magnification 10X • TrueView technology for capture of 100% circular field of view through the tablet camera; Captured field of view: diameter 5.5 mm with 4x objective, 2.2 mm with 10x objective, 0.55 mm with 40x objective and 0.22 mm with 100x objective • Quintuple inward facing nosepiece • Four high contrast premium infinity corrected plan achromat objective lenses – 4x, 10x, 40x, 100x oil immersion • 1.25 NA condenser; 3 watt LED illumination with intensity control • Rackless X-Y stage • Double plate stage size 190-140 mm • Coaxial coarse and fine focus knobs • iOS display with Maximum camera resolution of 3024 x 4032 pixels and 11” display with 2388x1668 pixels resolution; 64 GB ROM • Ultra HD video capture at 3840 x 2160 pixels • Pre-installed application with following features: • Data management • Image capturing • Video recording • Exposure, brightness, saturation, temperature and contrast control • Micrometry – linear and circular measurements in microns • Annotations and text addition Free hand marking and pointer for demonstration • Wireless HDMI dongle for lag-free real time casting to projector or LCD screen (accessory) Each 1.00 225073.20 225073

12 Item-12 P S SET. Speculum Sims Duckbill Small 1 Speculum Sims Duckbill Medium 1 Speculum Sims Duckbill Large 1 Speculum Cuscus Small 1 Speculum Cuscus Medium 1 Speculum Cuscus Large 1 Forceps Valsellum 8" 2 Forceps Valsellum 10" 2 Forceps Valsellum 10" Atraumatic 2 Sponge Holder 10” 2 Sponge Holder 8" 2 Artery Forceos 8" curved 2 Retractor Anterior Vaginal Wall 1 S. S. Bowls 10 cm 2 S. S. Kidney Tray 8” 1 S. S. Tray 12” x 8” perforated with out lid 1 Each 3.00 147262.50 441788

13 Item-13 MTP SET. No of Tray with lid Tr,ay size,(cm×cm×cm) 30X25X10-1 No of Sponge holder -2 No of Sim's speculum : Stainless steel,Double ended, blades should be at right angles to handle, tip of blades, should be rounded and atraumatic, size 26/31, 31/36, 36/42 mm -1 No of Anterior vaginal wall retractor : Stainless steel, loops at ends should make 15° angle with the shaft, should be angled at opposite directions and should have transverse serrations on eithersurface--1 No of Teale's Volsellum : Stainless steel,28-30 cm long, gentle curve of blades, tips should have 2 in 3 teeth, grip should be good, ratchet lock-1 No of Allis forceps, (nos)- 2 No of Ovum forceps of each size -2 No of Sharp and Blunt curette : With loops at both ends, angled in opposite directions, edge of one loops should be sharp and the other blunt, sizes : 2×3 mm to 6×10 mm-1 No of Bowl (medium size) (nos) -2 No of Suction tubing -1 Each 3.00 39466.35 118399

14 Item-14 BIOPSY CERVICALSET. 1 SS Kidney tray 01 2 SS Bowl 01 3 Cervical Punch Biopsy Forceps 01 4 Sponge Holding Forceps 02 5 Vulsellum 01 6 Long Straight Artery 01 7 Sims double bladed Speculum 02 Each 3.00 44767.80 134303

15 Item-15 D&C SET. 01 Sponge Holder 1 02 Volsellum 1 03 Sims Speculum 1 04 Sharman curette 1 05 Blunt & Sharp curette 1 06 Uterine Sound 1 07 Ovum forceps 1 08 Hegars Dilator 1 09 S.S.Stray 11x7 1 10 S.S Bowl small 3 Each 3.00 24740.10 74220

16 Item-16 I.U.C.D KIT. 1 S.S. Tray with lid – 9” x 6” 1 2 S.S. Bowl - Medium 1 3 SIMS Speculum – double bladed – medium sized 3 4 Anterior vaginal wall retractor 1 5 Vulsellum 1 6 Uterine Sound 1 7 Artery Forceps – 8” long – straight 1 8 Cu T Removal Hook 1 9 Kelly’s Forceps 1 10Sponge holding Forceps 1 Each 2.00 33575.85 67152

17 Item-17 LSCS SET. 1 Sponge Holder 2 2 Needle holder 2 3 Artery Forceps 3 4 Allis Forceps 1 5 Bab cock 1 6 Lanes Tissue Forceps 1 7 Doyn’s Retractor 1 8 Towel clip 4 9 Steel Basin 1 10 S.S Bowl 2 11 Big Bowl 1 12 Steel Tray without cover 1 14 Kidney Tray 10” 1 15 Myo curved scissor 8” 2 16 Straight scissor 6.5” 2 17 Tooth dissecting forceps 6.5” 1 18 Non Tooth dissecting forceps 6.5” 1 19 Metzenbaum curved scissor 8” 2 Each 3.00 64795.50 194387

18 Item-18 MVA KIT. Double Valve MVA Aspirator is made of polypropylene with double locking valves allowing at least 24 inches (609.6 mm) of mercury vacuum to be created prior to the procedure. The barrel of the aspirator has 60 cc volume or higher and features a secure stopping mechanism for the plunger when pulled. The plunger also features a locking mechanism to avoid plunger retraction. The aspirator should be able to maintain a minimum vacuum equivalent to 24 inches (609.6mm) of mercury for at least one hour. The aspirator should be able to withstand sterilization in a steam autoclave for 30 minutes at 121o C (250o F) at a pressure of 106 kPa (15 lbs/in2) and is reusable under normal use and maintenance MVA canula. Each 3.00 19438.65 58316

19 Item-19 VAGINAL HYSTERECTOMY. 1 BP Handle No.- 04 03 2 Dissecting Forceps plain - 8” 02 3 Dissecting Forceps toothed - 8” 02 4 Dissecting Forceps plain - 6” 02 5 Dissecting Forceps toothed - 6” 02 6 Adson Forceps plain - 5” 02 7 Adson Forceps toothed - 5” 02 8 Kocher Artery Forceps Straight - 7” 02 9 Kocher Artery Forceps Cur - 7” 04 10 Artery Forceps Curved - 8” long 06 11 Artery Forceps Curved - 6” Medium (FINE) 04 12 Mosquito Artery Forcep Curved - 5” 06 13 Artery Forceps staightr - 6” 04 14 SIMS Speculum – Large size – double bladed 04 15 SIMS Speculum – large size – single bladed 02 16 SIMS Speculum – middle size – single bladed 02 17. Langdonsretractor 01 18. Babcock Tissue Forceps - 6” 02 19 Babcock Tissue Forceps - 7” 02 2 Allis Tissue Forceps - 6” 06 21 Allis Tissue Forceps - 8” 06 22 Cat paw retractor 01 2 3 S.S Kidney Tray - 8” 02 24 Bowl S.S. - 6” 02 25 Metzenbaum Scissor Straight - 8” 02 26 Metzenbaum Scissor Curved - 6” 02 27 Metzenbaum Scissor Curved - 8” 02 28 Needle Holder - 6” 02 29 Needle Holder - 8” 01 30 Right Angle Artery Forceps - 6” 01 31 Right Angle Artery Forcep - 8” 01 32 Sponge Holding Forcep - 10” 02 Each 2.00 210290.82 420582

20 Item-20 PROCTOSCOPY SET. Tray Instruments with lid 9″x5″x2″ -1 Kidney Dish 30cm -1 Gallipot 2ozs-1 Proctoscope (Small) -1 Proctoscope (Medium) -1 Proctoscope (Large)-1 Each 1.00 91891.80 91892

21 Item-21 P.V.TRAY. Kidney Tray, 25cms / 10"-1 Sponge Holding Forceps, 20cms / 8" -1 Gallipot, 10cms / 4" -1 Sims speculum, Medium-1 Each 5.00 8011.08 40055

22 Item-22 ABDOMINAL HYSTERECTOMYSET. 1 BP Handle No.- 04 - 02 2 Dissecting Forceps plain - 8” 01 3 Dissecting Forceps toothed - 8” 01 4 Dissecting Forceps plain - 6” 01 5 Dissecting Forceps toothed - 6” 01 6 Adson Forceps plain - 5” 01 7 Adson Forceps toothed - 5” 02 8 Kocher Artery Forceps Straight - 7” 01 9 Kocher Artery Forceps Cur - 7” 01 10 Artery Forceps Curved - 8” long 02 11 Artery Forceps Curved - 6” Medium (FINE) 02 12 Mosquito Artery Forcep Curved - 5” 01 13 Artery Forceps straight - 6” 02 14 Doyen’s Retractor - 3” 01 16 Langenback Retractor - 8x35mm 01 17. Morris Retractor with ring handle - 2.5” 01 18. Babcock Tissue Forceps - 6” 01 19 Babcock Tissue Forceps - 7” 01 20 Allis Tissue Forceps - 6” 02 21 Allis Tissue Forceps - 8” 02 23 S.S Kidney Tray - 8” 02 24 Bowl S.S. - 6” 02 25 Metzenbaum Scissor Straight - 8” 01 26 Metzenbaum Scissor Curved - 6” 01 27 Metzenbaum Scissor Curved - 8” 01 28 Needle Holder - 6” 01 29 Needle Holder - 8” 01 32 Sponge Holding Forcep - 10” 01 33 Balfour Retractor - 10” shaft 01 35 Suction Tip Yankeur 01 37 Cross Action Towel Clips - 3.5” 01 38 Cross Action Towel Clips - 3” 01 Each 2.00 76576.50 153153

23 Item-23 LAPAROTOMY SET. 1 Kidney Tray Large 3 2 SsBowl 12 3 Towel Clip 1 4 Bp Handle No. 7 2 5 Suction Tip 2mm 3 6 Suction Tip 5mm 3 7 Yankaur Suction Tip 10 Mm-31 Cm 3 8 Needle holder 3 9 Dissecting Tooth Forcep 16 Cm 2 10 Adson Tooth Forcep 12 Cm 2 11 Adson Plain Forcep 15 Cm 2 12 Dissecting Plain Forcep18 Cm 2 13 Dissecting Plain Forcep Fine Tip 15 Cm 2 14 Dissecting Plain Forcep 23 Cm 2 15 Dissecting Plain Forcep 30 Cm 2 16 DebakeyForcep 20 Cm 2 17 Mosquito Artery ForcepCvd 12 Cm 2 18 Mosquito Artery ForcepCvd 14 Cm 2 19 Mosquito Artery Forcep St. 12 Cm 2 20 Mosquito Artery Forcep St. 14 Cm 1 21 Artery ForcepCvd 16 Cm 1 22 Artery Forcep Fine Cvd 18 Cm 1 23 Artery Forcep Fine Cvd 19 Cm 1 24 Artery Forcep Heavy Cvd 20 Cm 1 25 Allis Forcep 15 Cm 1 26 Allis Forcep 20 Cm 1 27 Babcock Forcep 18 Cm 1 28 Babcock Forcep 20 Cm 1 29 Kochers Clamp Cvd 20 Cm 1 30 Kochers Clamp St. 20 Cm 1 Each 1.00 150796.80 150797

24 Item-24 FORMALIN CHAMBER. Particle Size 1-30microns ( convertible for Dry fog wet fog) Power Input 220-240 volts, AC, with liquid flow rate 1.5-9 Ltr/ hr, Timer- Adjustable. Air velocity 130 M/sec., Throw Area 30-40 ft. and 20-25 feet height Area coverage – More than 12000 cubic feet. Motor Speed- approx. 22000 rpm (Approx.). Machine should have stainless steel (Autoclavable) tank with more 5 liters capacity. Tank gasket should be silicon grade. It should be 360 degree movable. Each 1.00 178734.60 178735

25 Item-25 KICK BUCKET. tubular frame: stainless steel 18/10 height: ± 20 or 90 cm 4 or 5 antistatic castors with rubber bumper (± 5 cm diameter) Bowl: stainless steel 18/10 capacity: 4 to 5 litresdiameter: 30 to 40 cm General Surgical Instrument Set Piles, Fistula, Fissure. three Circular Blade - 5.5mm ,6.5mm,7.5mm Diameter Probe Guide Base Plate Each 3.00 12577.62 37733

26 Item-26 GENERAL SURGICAL INSTRUMENT SET PILES, FISTULA, FISSURE.Surgical set (Piles & Hernia) Each 1.00 300415.50 300416

27 Item-27 KNEE HAMMER.Triangular Head, well grip handle, concealed brush with slide lock needle 20cm long Each 10.00 589.05 5891

28 Item-28 HERNIA, HYDROCELE INSTRUMENT SET. Hernia, Hydrocele. 1. Sponge Holder, Long 2 2. Curved Artery Forceps, 6-7 inch, Blunt tip 4 3. Curved Artery Forceps, 6-7 inch, Sharp Tip 4 4. Mosquito Artery Forceps, Curved, 5 inch 2 5. Straight Artery Forceps, 6-7 inch 4 6. Mosquito Artery Forceps Straight, 5 inch 2 7. Allis Tissue Holding Forceps, 6 inch 2 8. Allis Tissue Holding Forceps, 7 inch 2 9. Babcock tissue forceps, 6 inch 2 10. Babcock tissue forceps, 7-8 inch 1 11. Kellys Clamp, curved long artery, 9-10 inch, fine tip 1 12. Kellys Clamp, curved long artery, 9-10 inch, blunt tip 1 13. Kochers Clamp, curved, 9-10 inch 1 14. Right Angles Forceps, 7 inch, 80-90 degree angled, Horizontal Serrations 1 15. Right Angles Forceps, 8 inch, Fine Tip, 80-90 degree angled, Horizontal Serrations 1 16. Right Angles Forceps, 8 inch, Blunt Tip, 80-90 degree angled, Horizontal Serrations 1 17. Mayo Needle Holder, 6 inch, Tungsten Carbide jaws 1 18. Ryder Needle Holder, 6 inch, Tungsten Carbide jaws to hold 4-0 and smaller 1 19. Durogrip TC Debakey needle holder 7 inch length 1 20. Durogrip TC Debakey needle holder 9 inch length 1 21. Thumb forceps, tooth, 5 inch, tip 2 mm 1 22. Thumb forceps, tooth, 6 inch, tip 2.2 mm 1 23. Thumb forceps, tooth, 7 inch, tip 2.5 mm 1 24. Thumb forceps, tooth, 9-10 inch, tip 3-4 mm 1 25. Atraumatic Thumb forceps, non-tooth, 4 inch, fine tip 1 26. Atraumatic Thumb forceps, non-tooth, 5 inch, fine tip 1 27. Atraumatic Thumb forceps, non-tooth, 6 inch, fine tip 1 28. Potts smith Tissue forceps (tungstein carbide) 6-7 inch, toothed 1 29. Metzenbaum Scissors, (tungstein carbide blade, round tip), 5 inch curved blade 1 Each 2.00 148440.60 296881

29 Item-29 GYNAEC ELECTRIC CAUTERY. Best QualityGynaec Electric Cautery should have high frequency surgical unit more than adequate for all surgical procedures, can set a lower limit. Power –pack system gives intelligent cutting and coagulation support for initial incisions for all situations. Bi –polar coagulation has to be included in the above unit. Sophisticated self –check program: Minimum power consumption and patient’s safety in top quality must be present. Cut control for consistent regulation of cutting quality & soft coagulation with no carbonization to reduced adhesive effect. Neutral electrode safety system. Auto start and auto coagulation during bipolar coagulation. Digital error code displays electronic memory. Each 1.00 412335.00 412335

30 Item-30 VAGINAL EXAMINATION SET. Vaginal Examination set Kidney Tray S/S 307mm, 10″-1 Gallipot of 2 oz- 1 Gallipot of 04ozs-1 Ballenger Sponge HoldingFcps, S/S, 240mm, 9 1/2″-1 Sims Vag Spec D/E Blade of 75 x 30mm/ 80 x 35mm, S/S,150mm, 6″-1 Cusco Speculum Medium-1 Catheter And Instrument Tray W/O Cover 12″x8″x2″-1 Suturing Set Scissors,Deaver,140mm,cvd,s/b-1 Forceps,tissue,standard,145mm,str-1 Needle holder,Mayo-Hegar,180mm,str-1 Each 6.00 6597.36 39584

31 Item-31 SUTURING SET. Suturing Surgical Set Each 3.00 6832.98 20499

32 Item-32 MTP SUCTION APPARATUS. Flow rate 30LPM, Vaccum: 680mmHg, Moter Point: 0.25HP, Fully anti-rust ABS Body. Each 1.00 42411.60 42412

33 Item-33 THORACOTOMY SET. 1 SURGICAL NON-PERFORATING TOWEL CLAMP150mm -1 2 B.P. HANDLE NO.4 1 3 B.P. HANDLE NO.7 2 4 WAUGH TONSIL DISSECTING FORCEPS TOOTHED 200mm 1 5 WAUGH DISSECTING FORCEPS PLAIN 200mm 4 -1 6 FINE DISSECTING FORCEPS TOOTHED 200mm 2 7 FINE DISSECTING FORCEPS TOOTHED 150mm 2 8 FINE DISSECTING FORCEPS PLAIN 230mm 1 9 FINE DISSECTING FORCEPS PLAIN 180mm 1 10 ADSONS DISSECTING FORCEPS TOOTHED 153mm 2 11 ADSONS DISSECTING FORCEPS PLAIN 153mm 2 12 MAYOS SCISSORS ST. 150mm 1 13 MAYOS SCISSORS CD. 150mm 1 14 METZENBAUM SCISSORS STRAIGHT 200mm 1 15 METZENBAUM SCISSORS STRAIGHT 150mm 1 16 METZENBAUM SCISSORS STRAIGHT 250mm 1 17 NELSON METZENBAUM SCISSOR CURVED 30CM (BSC-P19) 1 32 18 MAYO HEGARS NEEDLE HOLDERS HEAVY 200mm 1 19 MAYO HEGARS NEEDLE HOLDERS 150mm 1 20 STANDRAD DISSECTING FORCEPS PLAIN 230mm 1 21 ROBERTS HAEMOSTATIC FORCEPS ST.245mm 1 22. BABCOCK TISSUE GRASPING FORCEPS 200mm 1 Each 2.00 41233.50 82467

34 Item-34 THOMAS SPLINT(Set). Paediatric 45-65 Adult . 65-100 Each 2.00 32986.80 65974

35 Item-35 GI OPERATION SET. 10 ADSON DELICATE FORCEPS CVD 185MM 1 11 GEMINI RIGHT ANGLE FORCEPS; CURVED JAW, LENGTH 230-235 MM 1 12 BABY-ADSON FORCEPS RIGHT ANGLED; LENGTH 180-185 MM 1 13 BABY-ADSON FORCEPS RIGHT ANGLED; LENGTH 140-145 MM 1 14 CUSHING VEIN RETRACTOR; BLADE SIZE SMALL, LENGTH 250-260 MM 1 15 CUSHING VEIN RETRACTOR; BLADE SIZE MEDIUM, LENGTH 250-260 MM 1 16 GIL-VERTEN VEIN RETRACTOR;BLADE SIZE SMALL, LENGTH 240-245 MM 1 17 REYNOLDS TENOTOMY SCISSORS ; TIPS BLUNT, CURVED BLADE, LENGTH OF 175-180 MM 1 18 POTTS TENOTOMY SCISSORS;TIPS BLUNT, CURVED BLADE, LENGTH OF 175-180 MM 1 19 ADSON DISSECTING SCISSOR; TIPS BLUNT, CURVED BLADE, LENGTH OF 175-180 MM1 DIETHRICH POTTS MICRO SCISSORS; SHARP TIP, BLADE ANGLE 60 DEGREE, BLADE LENGTH 10-12 MM, TOTAL LENGTH 180-185 MM 1 20 NERVE SCISSORS, SHARP TIP, BLADES CURVED, LENGTH 150-155 MM 1 21 METZENBAUM DELICATE DISSECTING SCISSORS, CURVED BLADE, LENGTH 230-235 MM 1 22 NELSON-METZENBAEUM SCISSORS, STRAIGHT BLADE, LENGTH 230- 235 MM 1 23 SPENCER-WELLS STRAIGHT ARTARY FORCEPS, LENGTH 175-180 MM 1 24 SPENCER-WELLS FORCEPS CURVED ARTERY,LENGTH 175-180 MM 1 25 TISSUE FORCEPS STRAIGHT, LENGTH 150-155 MM 1 26 NEEDLE HOLDER; HEAVY, SERRATED JAW, LENGTH 185-190 MM 1 27 NEEDLE HOLDER; HEAVY, SERRATED JAW, LENGTH 205-210 MM 1 28 NEEDLE HOLDER; SERRATED JAW, LENGTH 200-205 MM 1 29 FINE NEEDLE HOLDER, EXTRA DELICATE, SERRATED JAW, LENGTH 200-205 MM 1 30 FINE NEEDLE HOLDER, EXTRA DELICATE, SERRATED JAW, LENGTH 230-235 MM1 31 DE'BAKEY NEEDLE HOLDER; DELICATE, SERRATED JAW, LENGTH 210-215 MM 1 32 ALFOUR ABDOMINAL RETRACTOR, SIZE 200-210 X 260-270 MM, WITH LATERAL BLADE OF SIZE 80-90 MM 1 33 BALFOUR ABDOMINAL RETRACTOR, SIZE 200-210 X 230-240 MM, WITH LATERAL BLADE OF SIZE 60-70 MM 1 Each 2.00 195093.36 390187

36 Item-36 APPENDICECTOMY SET. 1. METZENBAUM SCISSORS 20CM TC CURVED -1 2. METSENBAUM SCISSORS 20CM TC STRAIGHT -1 3. MAYO SCISSORS 14CM CURVED TC -1 4. MAYO SCISSORS 14CM STRAIGHT TC-1 5. SCALPEL HANDLE # 4 -1 6. ALLIS TISSUE FORCEPS 15CM -1 7. KOCHERS TISSUE FORCEPS 12-1 8. MCINDOE FORCEPS 15CM -1 9. BABCOCKS TISSUE FORCEPS 16CM -1 10. MAYO HAGAR NEEDLE HOLDER 16CM-1 11. SPONGE HOLDING FORCEPS -1 12. BACKHAUS TOWEL CLAMPS 11CM-1 13. CRILES FORCEPS 14CM CURVED -1 14. CRILES FORCEPS 14CM STRAIGHT -1 15. SPENCER WELLS STRAIGHT 18CM -1 16. SPENCER WELLS CURVED 18CM-1 17. U S ARMY RETRACTOR 21CM-1 18. ADSON FORCEPS 12CM -1 19. ADSON FORCEPS 12 12CM-1 20. LANE FORCEPS 12 18CM-1 21. FORCEPS 16CM-1 22. GALLIPOTS 23. KIDNEY DISH 8"-1 Each 2.00 42411.60 84823

37 Item-37 LP TRAY. LP Tray. spinal Needle One multi-compartment tray One 21g x 2-1/2″ spinal needle with stylet One 3-way stopcock One 6″ extension tube One 1-piece 350mm manometer One 2mL ampule 1% lidocaine hydrochloride, USPOne 3mL syringe with 25g x 5/8″ needle Three sponge sticks Three gauze pads One towel One fenestrated drape with adhesive strip One bandage One CSR wrap One set of 10 Universal Medication Labels Each 1.00 76576.50 76577

38 Item-38 DIGITAL COLPOSCOPE. Digital Video Colposcope with standard accessories. With an integrated digital SLR camera (min. 10 megapixel) and live image viewing. Convergent optical beams that mimic the human eye for true stereoscopic 3-D visualization with less fatigue. Working distance is 25 to 30 cm for optimal clinical comfort. Multiple modes of Electronic Green filter for enhanced contrast. Magnification maximum 15x . Ultra Bright white LED cold light. Recommended Lamp Life 25000 hours. Minimum illumination 0.2 Lux. Along with Multi – function Image processing software with Footswitch & capture Card for Laptop / Desktop . Integrated Management of View Examination Image capture & Freeze, Recording, Observation, Processing, Saving and printout. . More than 500 inbuilt Reference pictures. . Can be integrated to Lan and HIS. . Side by side powerful Comparison of Coloposcopic images. .Statistic Analysis function. . Multi format Report Facility. Each 1.00 1041440.40 1041440

39 Item-39 SKIN TRACTION SET. Manufacturer quality Standard : “EN ISO 13485 certificate issued from a notified body” or “ICMED 13485 (with or without plus) certificate issued from certification bodies accredited by NABCB” or “ISO 13485 certificate issued from certification bodies accredited by NABCB / Nationally Recognized Accreditation Board under IAF MLA” or “ISO 9001”. Electrical safety standard: The quoted model should conform to “IEC 60601” or “IEC 61010” or “IS/ ISO / IEC 80601 (Part 2)” or “IS 13450 (Part 1)”. The quoted medical device must be registered under CDSCO and submit the license to manufacture for sale or for distribution of the medical device. If not registered, the acknowledgment copy of the online application for the said registration must be uploaded in the bid. Technical Specifications: 1. Traction force – 3 Kg to 90 Kg (1 Kg step) 2. Base force – 2 Kg to 85 Kg (1 Kg step) 3. Traction mode – Cervical and Lumber 4. Treatment time – 01 to 99 min (1 min step) 5. Hold time – 01 to 99 sec (1 sec step) 6. Rest time – 01 to 99 min (1 sec step) 7. Traction speed – 5 speeds 8. Progressive step – 1 to 10 step (max) Number of Modes: It should have at least 8 different modes (Intermittent, Static, Progressive/intermittent, Progressive/Regressive, Progressive/ Static, Cyclic/Intermittent, Cyclic/Static & cyclic) Traction Table: The traction unit should be mounted on 4 section high quality steel bed Features: Device should have following features:- 1. Progressive and step increment 2. Variable speed selections 3. High force range upto 90 Kgs 4. Low force range upto 85 Kgs 5. Wide input voltage range 6. User defined Hold, Rest and Treatment time 7. Graphic LCD display for all parameters 8. User-friendly digital interface 9. Provision for Saunders fitting 10.Reliable, durable heavy-duty motor 11.Noiseless operation 12.Easy to mount in table 13.Light weight Each 1.00 37981.94 37982

40 Item-40 INTERFERENTIAL THERAPY UNIT. 02 August2023HCT/NHSRCNAME ANDCODINGInterferentialTherapyUnit 11248GENERAL1.USETherapeuticultrasoundunitsconvertelectricalenergyto high- frequency (i.e., 1 or 3 megahertz [MHz]) sound waves that penetrate tissues to produce pain relief and facilitatetissuehealingthroughthermalandnon-thermalphysiologicreactionsPhysicalTherapyDepartment TECHNICAL2.TECHNICALCHARACTERISTICS DualoutputChannelsandisolatedbetweenchannels Shouldhave0-30operationprogramsSymmetricalBalancedSineWave OutputCurrent:0-100mAInterferenceFrequency2-160HzOutputFrequency4000Hz(with±1%tolerance)fixedon Channel 1ModulatingFrequency40024160Hz(with±1% tolerance) adjustable on Channel 21 TreatmentTimerContinuous,15,30,45or60minutes2pole/4polemultivectormodePatientsafetyfuse/Autocut-outManualInbuilt3.PHYSICALCHARACTERISTICS NANANoisepressurelevel(<or=60)dBA Shouldmaintainanominaltempandtheheatshouldbe disbursed through a cooling mechanism.ShouldbeCDSCOapproved. ShouldcomplywithBISstandards. ShouldcomplywithUSFDA/EuropeanCEstandards incase of non-availability of BIS standards. ShouldconformtoISO13485qualitystandards. Each 1.00 164180.02 164180

41 Item-41 SHORT WAVE DIATHERMY. 1. Should be microprocessor controlled solid state technology. 2. Should have continuous and pulsed output. 3. Should have an output of up to 400W in continuous mode. 4. Should have an output of up to 1000W in pulsed mode. 5. Should have a working frequency of 27.1MHz. 6. Should have a pulse width from 20 to 400 micro sec (pulse mode). 7. Should have inductive and capacitive applicator. 8. Should have a selectable treatment time from 1 to 30 minutes. 9. Should be supplied with all standard accessories including disc electrodes, rubber electrodes, mono-polar inductive electrodes, high frequency cables etc. 10. Should work with input 200 to 240 Vac 50Hz supply 11. Should have safety certificate from a competent authority CE issued by a notified body registered in European commission / FDA (US) / STQC CB certificate / STQC S certificate or valid detailed electrical and functional safety test report from ERTL. Copy of the certificate / test report shall be produced along with the technical bid. High Definition Medical Grade Monitor The monitor should have: HDTV display in original 16: 9 format. 1080 p/ 50 & 1080 p/60 displays possible. LED crystal display. Max. Resolution of 1920X1080. Screen diagonal – 27inches Desk top with pedestal Should have the facility of PIP mode. Accessories External 24VDC Power Supply, Mains Cord, Pedestal Certified to : EN 60601-1, protection class IPX 1 LED 175W Light Source Cold Light Fountain Power LED 175, with integrated, high-performance LED and one light outlet, power supply 110 - 240 VAC, 50/60 Hz consisting of: Cold Light Fountain Power LED 175 400 A Mains Cord Connecting Cable, length 100 cm Light source should be able to be automatically controlled by the camera. Features: The best of both worlds: Performance of xenon technology combined with the durability of LED technology Each 1.00 194810.62 194811

42 Item-42 HYSTEROSCOPE. 01 August2023 HCT/NHSRC NAMEANDCODING GENERAL 1.Use Hysteroscopyisaproceduretoexaminetheinsideof the uterus.Hysteroscopeisusedforthisprocesswhichisa narrow telescope with light and camera at the end. GynaecologyDepartmentHysteroscopysetshouldconsistoffollowing: CCDcamerasystem. Resectoscope Monitor LightSourcewithLightGuide Cable FluidManagementSystem MobileTrolley Hysteroscopysetwithaccessories: HysteroscopeForward-ObliqueTelescope30° (Diameter more than 2 mm). Diagnosticsheathmustnotexceed3mmwhen assembled for continuous flow Therapeutic sheath should not exceed 4.5 mm when assembledforcontinuousflowwith5fr(FrenchGauge-1 fr = 0.33 mm) working channel Semi-rigid5FrbiopsyforcepsandSemi-rigid5Fr grasping forceps for removing IUCDs SystemshouldbeAutoclavable. Dedicatedprotectiontubefortelescopeshouldbe available. 2.Resectoscope: Connecting tube for inflow and outflow for the above 4 mm hysteroscope telescope complete with continuous irrigationdoublesheathsystem,i.eouterflowandrotating innertubewithceramicinsulationdistaltipcompletesetofelectrodesand2setofHFcables. CCDHighResolutionCameraSystem: Camera Head: Shouldbewaterproofwithahighresolutioninterline rugged CCD system and compatible with Fiber optic endoscope. HighQualityImageby10BitDSP(DigitalSignal Processor) SignalNoise—50dBorless Brightness—1.8(3Lux)ormore Each 1.00 530145.00 530145

43 Item-43 VIDEO ENDOSCOPE GI. HD Video Processor Module Should be compatible with Analog, DVI-D x 2, RGB-TV x 1, S VIDEO × 1, VIDEO x 1 Mask type Full HD, SXGA output for a HDTV monitor should be available. Should contain the electronics to operate Multi optical zoom for clear visibility of near & far objects. System should have both Digital enhancement facility as well as real time optical chromo endoscope technology for detection and characterization. Suitable for BLI & BLI Bright & FICE/ NBI & RDI & TXI or equivalent Digital and Optical enhancement technology to provide high Contrast Images while performing Optical Magnifying Endoscopy. System should support Close focus up to 1.5 mm to get enhanced image for diagnosis. Should have Special light function LCI for detection of surface patterns and vessels. Should be compatible with Optical zoom with provision of Step wise & continuous zoom also. System should be compatible and upgradable with the Artificial Intelligence technology for early cancer/polyp with detection and characterisation feature. Equipped with high resolution HDTV Imaging capacity and have stand by option to exchange the Scopes. Auto White balance should be available. Compact, lightweight (10-15 kg) and ergonomically designed. Recording of both still & moving images. Equipped with one touch connection of scopes and system should have Contact free technology - Power feed should be through Wireless electrical supplyImage Transmission should be through high speed optical fiber. Remote Signal should be Infrared (IR) LED Portable Memory & USB Slot for image recording with 4 GB internal memory and external USB (8GB) with Automatic IRIS control & automatic white balance. Electronic Zoom 2.0 X or more with Recording of both still & moving images. Equipped with 3 or more Multi LED, at least 5 years life of bulb/light with BLI, BLI bright, LCI, FICE or NBI, RDI, TXI technology. MultiLED Output with 3 or more LED should be equivalent to 300W Xenon Light Source or more to have optimum brightness Compatible for waterproof one touch connector. Equipped with special filter/function for BLI, BLI bright FICE & LCI/ NBI, RDI & TXI. Backlit front panel indicators. Equipped with automatic light adjustment forced air cooling, regulated air feeding pump Each 1.00 2886345.00 2886345

44 Item-44 ANAESTHETIC-LARYNGOSCOPE MAGILLS WITH FOUR BLADES; Technical Specification-Laryngoscope(Various) LARYNGOSCOPE ADULT AND PEDIATRIC 1 Should supply 4 different size standard blades and one handle for adult and pediatric separately and one short stubby handle 2 Should be stainless Steel matt finished. 3 Should provide curved blades for both adult and pediatric. 4 An extra large blade should be supplied along with each scope. 5 Should be provided with battery 6 Should provide spare bulb -6 nos IⅡ LARYNGOSCOPE NEONATAL 1 Should supply 2 different size standard blades and one handle. 2 Should be stainless steel matt finished. 3 Should provide straight blades -2Nos each 4 Should be provided with battery 5 Should provide spare bulb -6 nos Each 1.00 28274.40 28274

45 Item-45 VIDEO LARYNGOSCOPE. Specification of Video Laryngoscope The system should allow clear view of laryngeal inlet during intubation under video guidance without manipulation of neck. It should consist of following features: Blades: The system should have reusable D-Blade (for adult or pediatric use, as per the requirement) with integrated camera chip with closed metal finish and LED light illumination. Each Blade should have inbuilt camera and light source with antifogging mechanism and visualization through fluid should be possible. The blade should be specially designed for difficult airway (intubation) for patients with limited mouth opening & should have an angulation of 80 degrees. Blades should be fully immersible in disinfection solution and should also be compatible with gas plasma sterilizer. The blades should be compatible with CMAC display unit, available in the department. It should be supplied with CMAC connecting cable. Should be US FDA/CE certified Specification of C Mac Monitor Monitor screen of approx. 6-7 inch or more in size for color TFT display with feature control buttons on the screen with composite output for connecting to another monitor/screen Video recording and still image recording facility should be available (Minimum 3-4 GB internal memory) on data card or USB with JPEG and MPEG4 format which can be easily transferred to the computer/laptop. Connecting cable should be provided Should have the provision to mount the monitor on movable stand or keep it on IV pole mount. Movable Mount stand should be provided for the monitor The display unit should have a CMOS/CCD technology with LED illumination. The Light source should be integrated into the display unit. It should be less than 2kgs. The monitor to include features for the control of BRIGHTNESS, contrast, color, mirror, white balance facility should be available. Image & video playback on monitor screen should be available Each 1.00 530145.00 530145

46 Item-46 MAGILLS FORCEPS (TWOSIZES). FORCEPS, CATH. INTRODUCING, MAGILL, 16cm, child extra small-1 FORCEPS, CATH. INTRODUCING, MAGILL, 19cm, child small-1 FORCEPS, CATH. INTRODUCING, MAGILL, 24cm, adult-2 Each 5.00 24740.10 123701

47 Item-47 NERVE STIMULATOR. Should be suitable to identify peripheral nerves and giving percutaneous stimulation in neuro muscular block. - Should have a percutaneous monopolar/ bipolar stimulating handle for Localization of Nerves without puncturing the nerve which should be autoclavable. - Should have selectable stimulation intensity ranging from 0-60mA in steps 0.1mA with stimulating handle and stimulation impulse width from 0.3ms, 0.5ms and1.0ms - Should continuously measure & display actual current passing through the patient and selected current - Should have pause function to interrupt stimulation without delivering impulses test function - Should automatically switch off with a acoustic warning if not operated over a period of 20 mins - Should have LCD display for stimulation current, impulse pattern, pulse width, impulse amplitude. - Should have analog and digital display of selected current and actual current. Should have membrane touch pads for choosing stimulation function Should be small (pocket size) & light weight. Should be CE Certified /FDA Certified and CDSCO Should be supplied complete with Percutaneous Stimulating Handle Cable for invasive and percutaneous nerve stimulations 9 volt battery At least 3 nerve stimulation needles compatible with the Nerve Stimulator Each 1.00 147262.50 147263

48 Item-48 PATIENT WARMER SYSTEM. 1. Purpose: To be used in operation theatres and recovery room where patients are at risk of hypothermia. The Patient Warming System should have Cross compatibility of blankets. The Patient Warming System Should be suitable for patient warming in both Adult and pediatric patients. The Patient Warming System should have fast warming system and should set temperature in degree centigrade within 60 seconds. Temperature Management Unit should be provided with the Patient Warming System to generate high flow of warm air. The control unit should be light weight and small in size easily mountable with a fixing claw. The length of hose should be 150 to 200 centimetres. The Patient Warming System should have multiple mounting options such as Bed rail, IV Pole, Cart, Floor, Trolley etc. The range of temperature setting should be in between 32°C-44°C. The Patient Warming System should have a digital Display (LCD) for temperature and settings. The Patient Warming System should have availability of audio alarm in case of thermostat failure. The Patient Warming System Should have basic warming unit and disposable blankets. The Patient Warming System should have availability of thermal cut out in case of thermostat failure and temperature goes higher than 48°C. The Patient Warming System should have auto heating cut off facility to control the set temperature and sensors to prevent patient burn. The Patient Warming System should have Hepa Filter 0.2-0.3 filtration efficacy. The Patient Warming System should have availability of hose end thermostat for effective delivery of set temperature to patient and to prevent burns. Disposable blanket adult -20 no should be provided. Each 1.00 382882.50 382883

49 Item-49 AIRWAY FEMALE. Tracheostomy Tube Plain, size 3.5mm ID, made from implant quality PVC, clear with radio opaque marker, with obturator, flexible flange, 15mm connector Each 4.00 5654.88 22620

50 Item-50 AIRWAY MALE. Tracheostomy Tube Plain, size 3.5mm ID, made from implant quality PVC, clear with radio opaque marker, with obturator, flexible flange, 15mm connector Each 7.00 5654.88 39584

51 Item-51 TONGUE DEPRESSORS SET. Description:L-ShapedtongueSpatulaused to depress the tongue to allow for examination of the mouth and throat Material:madeofrustproofpremiumquality Stainless Steel Length: 5 to 6 inches approx. with varying sizes for pediatric and adult use. Packed in set of 5 pcs, re-usable and autoclavable. Each 8.00 5654.88 45239

52 Item-52 O2 CYLINDER FOR BOYLES. ‘A’ Type Oxygen Cylinders Standard: Indian Weight: 5 Litre Water capactiy Volume: 0.7 Cubic Meter Each 10.00 23562.00 235620

53 Item-53 N2O CYLINDER FOR BOYLES. A’ Type Nitrous Cylinders Standard: Indian Weight: 5 Litre Water capactiy Volume: 0.7 Cubic Meter Each 6.00 23562.00 141372

54 Item-54 CO2 CYLINDER FOR LAPAROSCOPE. Carbon dioxide Medical grade I.P. 1996/Latest IP (in Kgs.) 10 kg Each 4.00 26479.20 105917

55 Item-55 PULMONARY FUNCTION TEXT (PFT) MACHINE. 1. Ultrasonic flow sensor for TOTAL infection control 2. Easy to Operate 3. Calibration free 4. Flow accuracy ± 5 % or 200 ml. 5. Flow range ±16 L/S 6. Volume accuracy ± 3 % or 50 ml. 7. Weight not more than 2 Kg 8. Runs from the USB port of any PC. 9. Meets and Exceeds ATS/ERS Criteria. 10. Bio calibration check feature. 11. Ready to use GDT interfacing possibility. 12. In-and expiratory real-time curve. 13. Should not influence of humidity, barometric pressure contamination. 14. Should be Auto QC. 15. Should be multilingual. 16. Sensor never ever in contact with sample. 17. No cleaning, no maintenance. 18. Extremely high accuracy for low flows (Resistance free measurements)- 0.5 cm H2O/L/S. 19. No down time. 20. Should be FDA/CE and CDSCO approval Each 2.00 202633.20 405266

56 Item-56 MULTI-PARAMETERMONITOR HIGH END. These systems usuallyinclude acentralstationmonitor thatreceives, consolidates,anddisplaystheinformation andasetofmonitorsthatare deployed near thepatient (bedsidemonitors)toprovide therequireddatafromeach patient (ECG, respiratory rate, noninvasive blood pressure (NIBP) and invasive blood pressure (IBP) (systolic, diastolic, and mean), body temperature, (SpO2), mixed venous oxygenation (SvO2), cardiac output, (ETCO2), intracranialpressure, andairwaygasconcentrations)ShouldhavemodularMultiparametermonitor with TFT/LED/LCD/touchscreendisplaywithmorethan 15 inches withatleast 8 wave forms and upgradable up to 14 waveforms & 22 parameter numeric on single display. Thewaveformsshouldbeuserselectable. MonitorshouldhaveinbuiltLithium-iontypebattery for 2 Hour continuous operation. Shouldhavekeysforquickaccesstomainfunctions. Should beabletomonitor ECG (3,5,12 leads), SPO2,NIBP, 2IBP, Respiration Rate, 2 temp, ETCO2,foradult,pediatricandneonatalpatients as standard and Anesthesia gas monitoring. Monitormusthavefacilityforatleast2IBP measurementssimultaneously.Alsoshouldhave SPV/PPVmonitoringfacility. 5LeadECGmonitoringwithfullrangeoflethal arrhythmia recognitioncapabilityandSTanalysisupto12leads and72hourtrendfacility. Respiration,Apneaalarm,Prioritizedaudio-visual alarms and snap shot facility. Transportmodulewithdisplayandbatterybackupof atleast1hour. PulseOxymeter(SPO2)withPlethysmogragh &PuIsestrengthindicatorWithVariablepitchwith changeinSpO2(lowperfusion motion tolerance technology). Side-streamCapnographywithdisplayofCO2wave form& digitalvalues(ETCO2,FiCO2,RR). Monitor should have provisions for automatic identification and measurement of anesthesia agents, CO2, 02, N2O and facility to measure at least S volatileagentswithautomatic detection. Shouldbeupgradabletomonitorcardiacoutput (Thermo dilution/ PICCO), BIS/DA and NMT. It should have provision for automatic identificationandmeasurementandanesthetic agents, Co2, 02, N2O and facility to measure MAC. Thedisplaysettingshouldhaveatleast10user defined setups variable as per applications for flexible use of the monitor in various clinical environments such as in OT, PACU, ICU, ER, NICU. Monitorshouldhavenetworkingoptionswith Each 3.00 341649.00 1024947

57 Item-57 DEFIBRILLATORS. 1.TECHNICALCHARACTERISTICS Unitshouldbelightweightcompactandportable. Unit should have facility for Automatic External Defibrillation and manualdefibrillation. Shouldbeabletodelivershockfrom50-200joulesin biphasic mode viametal chest pads. Shouldhavingdesignprotectiontoavoidpassageof current to the user. The whole system should have an inbuilt recorder. Themonitor should haveacolor displaywithathree channel display. Inbuilt 3.PHYSICALCHARACTERISTICS Compact Lightweight <60dBA;adjustableheartratealarmaswellaspaddles& ECG cable disconnection alarms. Yes 4.ENERGYSOURCE 220+/-10%VAC, 50Hz Rechargeablebatterybackupofapproximately5hours. Accessories (mandatory, standard,optional) Spare parts (main ones) Consumables / reagents(open,closed system) Chest paddles ECGcable; Recording paperrolls; Disposable pads; 03 years PreventiveMaintenancevisitsatleastonceineach quarter. Each 2.00 412335.00 824670

58 Item-58 INFUSION PUMPS. Todetectcardiacarrhythmiasinasuddencardiacarrest patient,andthenaudibly/visuallyinstructsanoperatorto enable it to activate defibrillation of theheart through applicationofelectricalshockstothechestsurface. Emergency/ICU/Cardiaccare TECHNIC AL 2.TECHNICALCHARACTERISTICS Unitshouldbelightweightcompactandportable. Unit should have facility for Automatic External Defibrillation and manualdefibrillation. Shouldbeabletodelivershockfrom50-200joulesin biphasic mode viametal chest pads. Shouldhavingdesignprotectiontoavoidpassageof current to the user. The whole system should have an inbuilt recorder. Themonitor should haveacolor displaywithathree channel display. Inbuilt 3.PHYSICALCHARACTERISTICS Compact Lightweight <60dBA;adjustableheartratealarmaswellaspaddles& ECG cable disconnection alarms. Yes 4.ENERGYSOURCE 220+/-10%VAC, 50Hz Rechargeablebatterybackupofapproximately5hours. Accessories (mandatory, standard,optional) Spare parts (main ones) Consumables / reagents(open,closed system) Chest paddles ECGcable; Recording paperrolls; Disposable pads; 03 years PreventiveMaintenancevisitsatleastonceineach quarter.Aninfusionpumpinfusesfluids,medicationornutrients into a patient's circulatory system. It is generally used intravenously, although subcutaneous, arterial and epiduralinfusionsareoccasionallyused. Emergency,OperationTheatre,Criticalcare Flowrateprogrammablerangeatleastfrom0.1to200 ml/hr, instepsof 0.1ml/hr; and at least from 100to 1200 ml/hr in steps of 1 ml/hr. SaveslastinfusionrateevenwhentheACpoweris switched off. Each 3.00 76576.50 229730

59 Item-59 SYRING PUMP. TECHNIC AL 2.TECHNICALCHARACTERISTICS Unitshouldbelightweightcompactandportable. Unit should have facility for Automatic External Defibrillation and manualdefibrillation. Shouldbeabletodelivershockfrom50-200joulesin biphasic mode viametal chest pads. Shouldhavingdesignprotectiontoavoidpassageof current to the user. The whole system should have an inbuilt recorder. Themonitor should haveacolor displaywithathree channel display. Inbuilt 3.PHYSICALCHARACTERISTICS Compact Lightweight <60dBA;adjustableheartratealarmaswellaspaddles& ECG cable disconnection alarms. Yes 4.ENERGYSOURCE 220+/-10%VAC, 50Hz Rechargeablebatterybackupofapproximately5hours. Accessories (mandatory, standard,optional) Spare parts (main ones) Consumables / reagents(open,closed system) Chest paddles ECGcable; Recording paperrolls; Disposable pads; 03 years PreventiveMaintenancevisitsatleastonceineach quarter.Aninfusionpumpinfusesfluids,medicationornutrients into a patient's circulatory system. It is generally used intravenously, although subcutaneous, arterial and epiduralinfusionsareoccasionallyused. Emergency,OperationTheatre,Criticalcare Flowrateprogrammablerangeatleastfrom0.1to200 ml/hr, instepsof 0.1ml/hr; and at least from 100to 1200 ml/hr in steps of 1 ml/hr. Saveslastinfus Each 5.00 65973.60 329868

60 Item-60 DOCTOR'S CHAIR FOR OP WARD, BLOOD BANK, LAB ETC. Cussionable Chairs Each 20.00 24784.53 495691

61 Item-61 MORTUARY TABLE (STAINLESSSTEEL). Elevating with stainless steel dissection board (straight table, not L type), Approx Dimension:100”L x 40”W. Integrated sink should also have samelengthandwidth. Elevatingheight32”to40’upanddownpedestalcontrol. All thick gauge heavy duty anti corrosion stainless (SS 304) construction. Table top and integrated sink fabricate of minimum 14 gaugestainlesssteel,anticorrosionpedestalofminimum 11” gauge stainless steel with satin finish. Minimum 1/2” removableperforatedgridplatewith3/8”diameterholeon 2” centers (4 each). Large double wall Sink with regular removable sprinkle system, Handy spray, rinse facility. Faucets stainless steel.Handshower:heavydutychromeplatedhandpiece durable minimum 8’ long flexible hose Hand piece with hose drop in deck. Concealed pressure control hot and cold water mixture/swing spout/tap. Hydroaspirator with reverse flow having built in vacuum breaker. Access panel 2 outlet curved molded sides of table (Stainless Steel). (L) 70”X30” (W) for dissection of internal organs. Extension should have independent fixed pedestal and not attached to autopsy table as pedestal is fixed. The edger should be curved, molded andraised. Electrical outlets should be water splash proof. Table should be able to mount in position that allow surgeon to move around the table. Table should have engraved scale for cadaver measurement in centimeters and inches. Rivets or bolts on table should not enable bacterial or microorganismgrowth or accumulation.Should be compatible with Medical grade disinfectant solutionslike Cidex or hydrogen peroxide solution. 3years,includingallsparespartsandaccessories. Each 2.00 172114.80 344230

62 Item-62 P.M. EQUIPMENT (ASPERLIST). 1. Amputation Saw 12” - 1 Quantity 2. Bowel Scissors 7”- 4 Quantity 3. Post Mortem Scissors 6”- 4 Quantity 4. Blow Pipe straight 8” - 2 Quantity 5. Hammer with chisel 8” - 1 Quantity 6. Detachable Cross handle chisel 3.5” - 1 Quantity 7. Skull Rest 7” - 1 Quantity 8. Brain Knife 9.5” - 1 Quantity 9. Caltin Knife 9.5” - 1 Quantity 10. Cartilage Knife 7.5” - 1 Quantity 11. Scalpel 16” - 4 Quantity 12. Dissecting Forceps 6” - 1 Quantity 13. Chain hook set of 3, 3” - 1 Quantity 14. Scalpel Handle 127 mm - 1 Quantity 15. Organ knife and saw 22mm blade - 1 Quantity 16. Bistoury Knife 70mm blade - 1 Quantity 17. Rib Knife - 1 Quantity 18. Pelvic Organ Knife - 1 Quantity 19. Dissection scissors - 1 Quantity 20. Bone cutting scissors - 1 Quantity 21. Needle Holder - 1 Quantity 22. Raspatory - 1 Quantity 23. Retractor - 2 Quantity 24. Osteotome - 2 Quantity 25. Vagotome - 1 Quantity 26. Surgical needles - 12 Quantity 27. Folding rulers 300 mm - 2 Quantity 28. Probes with eye/fish tail - 2 Quantity 29. Measuring/specimen jar (100 ml and 1 Litre) - 1 Quantity 30. Rib Shears Each 5.00 12210.70 61054

63 Item-63 WEIGHING MACHINES (ORGANS). The completely electronic scale for precise weighing has a large LCD display, height 20 mm. The weight is switchable from kg to lbs. The scale has a automatic zero setting, tare function and hold function. The stainless steel bowl be removed for cleaning. should include batteries and main supply.Dimensions W/D/H:Weighing scale:Accuracy: 535 x 241 x 330 mm 0 - 30 kg 1 gram Each 1.00 17765.75 17766

64 Item-64 MEASURING GLASSES (LIQUIDS). Measuring jar with borocilglass with range 1000ml marking graduation on the glass. Each 6.00 8949.97 53700

65 Item-65 SPOTLIGHTS. Measuring jar with borocilglass with range 1000ml marking graduation on the glass Amobiledeviceintendedtoprovidelighttoilluminateasite of patient examination and/or treatment. ExaminationRoom,MinorOT ShoulduseaLEDlight source. Itshouldhavevariablelightintensityupto50000Lux. Knoborbuttonsforadjustingthelightintensity between 20,000 to 50,000 Lux. LifespanofLEDlampshouldnotbelessthan30000 hours. Itshouldhavewidefieldsizeofillumination. Armshouldbeadjustablehorizontally,verticallyand easy to focus on all directions. Itshouldhaveanon/offswitch. The standshould beheavy, anditshould have360 degrollerwheels(Angular/SSMS-304)withlocking mechanism.220+/-10%VAC, 50Hz Yes,Minimumbackuptimeof02hour NA Tobespecifiedbymanufacturer Warranty 03 Years Each 3.00 29073.11 87219

66 Item-66 REHABILATION AND PHYSIOTHERAPHY Each 1.00 1572463.99 1572464

67 Item-67 3rd Charges at 1% Each 1.00 192525.00 192525

68 Item-68 Miscellaneous and rounding off Each 1.00 7065.62 7066

Estimate for Hospital Furnitures and Accessories for Kampli New 100 Beds Taluka Hospital, Under 2515 KKRDB Macro for the year 2024-25. (PWD/2025-26/IND0204)

SL. No. Item Code Item Name Unit Scheduled Quantity Unit Price Rs. Amount Rs.

1 Item-1 ANAESTHESIA WORK STATION. 4.Minute volume: A control adjusts the total inspiratory volume-per-minutedeliveryfromthebellowsshallbe>20 L/min. 5.Therespiratoryfrequencycanbesetwithinrangeof5- 60 breaths per minute. 6.Inspiratoryflow:Theflowrangeofgasthattheventilator is capable of delivering to the patient shall be 0-180 L/min. 7.Pressurelimitshallbeadjustableand<70preferredcm H2O. Unit should have PEEP of 0-20 cm H2O. 8.Theworkstationshouldbecapableofdeliveryoflowflow anesthesia. AnesthesiaMonitoringSpecifications: 1.Monitoringofvitalparameters:ECG,NIBP,SPO2,and Invasive Blood Pressure. 2.Twintemperaturemeasurementwithskinandcore temperature probes—Twosetswitheachmonitor. 3.Automaticidentificationandmeasurementofanesthetic agents EtCO2, 02, and N2O and MAC value. FiO2 measurement. 3.Facilitytostoresnapshotsduringcriticaleventsfor waveform review at a later stage. 4.Audiovisualandgradedalarmingsystem. Displayof Ventilator: Modeofventilationtobedisplayed,Respiratoryrate,flow, pressure also to be displayed. 220+/- 10%VAC,50Hz Yes,atleast30minutesbackup. Stabilizertobeprovidedfor protection. Tobespecifiedbyserviceprovider. 1.Circleabsorber—01No. 2.VaporizerHalothene—01No. 3.VaporizerDesflurane—01No. 4.Vaporizerisoflurane—01No. 5.Vaporizersevoflurane—01No. 6.AdultandPediatricautoclavable siliconebreathingcircuits—2 each. 7.ReusableIBPcable -04. 8.Humidifiers—1No 9.Disposabletransducer—100 10.TemperatureProbeSkinreusable—02. 12.Temperaturecorereusable-04(02-Adults,02-paediatrics) 13.Depthofanesthesiasensors—50 14.Accessoriesforneuromusculartransmissionmonitor-01set. 15.Standardaccess Each 3.00 2945.25 8836

2 Item-2 DOCTOR'S TABLE. Size :1200 X 750 X 750 BEECH with 2 drawer hanging unit, Size: 400 X 400 X 300, Table Top: Table tops made of 25mm (minimum)Prelaminated particle board of E-1 Grade Conforming to IS : 12823 of desired color with PVC edge banding. All exposed edge sealed by 2mm (minimum)thick PVC Imported edge Banding. Table Top Support: 18 mm thick PLB gable ends & 18 modesty Panel. Each 3.00 25155.24 75466

3 Item-3 DUTY TABLE FOR NURSES. Size of the Top : 4’x3’ Made out of pre-laminated particleboard with special top surface, metal 3 nos. drawers on right side slide. smoothly on roller bearings. Flush drawers have single key locking facility for 3 drawers. Table legs are made out of ERW steel tube, rectangular or size 31.75 X 31.75 cm of 18 gauges. And top frame of size 3 cm. Frames welded by mig welding process. Frames are powder coated with minimum thickness of 50 microns. Tabletop is 25mm thick phenol bonded particleboard mounted on 1mm thick laminate. Top Backing sheet 0.5 mm thick to glued below the tabletop using good adhesive. All exposed edges are bonded Using EVA hot melt glue at 200oc on the machine with PVC tapes. Hardware of good quality, height to the table is 0.76meter. Each 2.00 1130.98 2262

4 Item-4 TABLE FOR STERILIZATION USE (MEDIUM). Size of the Top : 4’x2’ without drawer Made out of pre-laminated particleboard with special top surface,. Table legs are made out of ERW steel tube, rectangular or size 31.75 X 31.75 cm of 18 gauges. And top frame of size 3 cm. Frames welded by mig welding process. Frames are powder coated with minimum thickness of 50 microns. Tabletop is 25mm thick phenol bonded particleboard mounted on 1mm thick laminate. Top Backing sheet 0.5 mm thick to glued below the tabletop using good adhesive. All exposed edges are bonded Using EVA hot melt glue at 200oc on the machine with PVC tapes. Hardware of good quality, height to the table is 0.76meter Each 2.00 20027.70 40055

5 Item-5 LONG BENCHES (6½'X1½'). The product should be in complete knock down structure as much as possible /feasible enabling ease in transportation and assemblies with class rooms. The panels are made from 18±1mm thk Pre-laminated board with 2 mm PVC edge banding on all sides. Seat height shall be 437mm, The under structure is made of ERW Tube (IS 7138) 25.4±0.3 mm x 25.4±0.3 mm x 1.29+/-0.096 mm (16 gauge) thick powder coated 50 microns (±10) at base which are welded to the desk and seat supports that are made of MS angle sections 30±1 mm x 30±1 mm x 3.0 ±0.25mm thick (IS 2062 Equivalent) powder coated 50 microns(±10). Each 1.00 282744.00 282744

6 Item-6 STOOLS REVOLVING. Revolving Stool – Overall Approx Size: 480mm To 670mm H. Tubular tripod base of 25.4 x 14 g ERW tube with revolving SS top. Height adjustment by screw. 300mm dia The legs fitted with high quality PVC shoes with nylon reinforcement. Left leg 384mm All SS parts finished with Matt polish. All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2008 Each 4.00 164934.00 659736

7 Item-7 STEEL CUP-BOARD. Size 72” x 36” x 19” with 4 shelves to be fixed having 5 compartments, double door with three way locking device with duplicate keys made out of CRCA sheet of 18 gauge with de rusted Powder Coated Siemens gray colour paint. The edges of doors and shelves should be properly bent to U shape neatly and finished Multi bend construction and inter locking design and full length over lapping doors and side. Three way bolting mechanism. Spot welding & Co2 welding. Anticorrosion treated components and oven baked painting process. a. Top, bottom, LH & RH sides and back material thickness- 1 mm b. Removable RH & LH main doors with stiffeners material thickness=1 mm c. Almeria’s to be provided with 4 full fixed shelves of inside shel Each 3.00 388773.00 1166319

8 Item-8 RACKS–STEEL. Iron Rack Four Steps:Four side angled support of 14 gauge and four steps of plates with 16 gauge. Screw system for fixing the four plates for adjustable height with strong screw support. Strong non-wearable bush support for the angled side support. It should be open rack. Each 1.00 282744.00 282744

9 Item-9 PATIENTS WAITING CHAIRS (MOULDED). A unit of three seater perforated sheet type visitor chairs within built arm to be supplied as follows. Frame made out of M.S. Square 35x35 mm 16 gauges. Two Nos of vertical supports of 35x35 mm 16 gauge square on each side to be provided interconnected by a cross member of same dimension. Two Nos. of horizontal supports of M.S. 35x35 mm 16 gauge 40 cm length to be provided at the bottom. Three chairs to be mounted on the frame with suitable bolts. Provision of suitable moulded studs to be incorporated at the bottom of seats for rigid mounting. Dimensions of seat is as follows. Seat weight - 30-40cm Seat length - 37-40cm Seat width - 58-60cm Each 2.00 79437.60 158875

10 Item-10 ATTENDANTS COTS. This specification is for Iron Cots suitable for general purpose in hospitals. Dimensions: Over all dimensions of Cot of size top frame shall be Length 1800 mm, Width 600 mm and Height 400 mm. The various tubes used in manufacture of Iron cots should have the following outside diameter and thickness. Component outsidedia (mm) Thickness (mm) a. Four Legs rectangular: 75 x 25 x1.60 mm thickness b. Four Legs rectangular: 75 x 25 x1.60 mm thickness c. Cross Tubes CR Tubes: 25X25 mm Sq 1.22mm Thickness The MS Flat for top shall be inside all four sides of size 50X3 mm minimum thickness of 3.0 mm. Material: Frame work shall be of CR sheets conforming to IS: 513 D quality. Bows & Rectangle & square Tubes: These shall be made from CR steel tubes. Shoes: These shall be manufactured from PVC Shoes. Nominal height of the shoe shall be 35 mm. Outside dimensions of 3mm. Manufacture: Manufacture The bed frame shall be made from C.R. sheet double bent. It should be reinforced with two formed channels to size 20 x 50 x 50 x 50 x 20 mm of 1.25mm thickness flanges welded inside the length wise. Mattresses: Overall Sizes of Mattresses is (L) 1800 mm x (W) 600 mm x (H) 75 mm of PU foam of 40 density, covered with ST rexine properly stitched. Each 1.00 306306.00 306306

11 Item-11 OFFICE CHAIRS. Executive chairs (revolving mode) with arms Approx. dimensions seat depth - 480-500 mm Seat width - 480-500 mm Back height with foam seat - 500-520 mm Total height of chair with height adjustment - 950-1050 mm 5 star gravity alluminium die cast, base made from high quality material confirming to I.S. 6051/1970. Base should have 5 Nos. specially designed twin wheel castors (castors to be abrasive resistant and resistant free movement on carpets). Manual seat height adjustment and lockable at any suitable height. The chair should have tilting mechanism. The structure of the mechanism is manufactured out of CRC steel sheet. The seating structure is made of ERW tubular structure upholstery to be made of polyurethane foam of 55 density thickness 37 mm backed by 1” Kurl on. Arms of the chair are to be made of moulded polyurethane arm with steel insert for long life Each 1.00 225073.20 225073

12 Item-12 OFFICETABLE. Size of the Top : 4’x3’ Made out of pre-laminated particleboard with special top surface, metal 3 nos. drawers on right side slide. smoothly on roller bearings. Flush drawers have single key locking facility for 3 drawers. Table legs are made out of ERW steel tube, rectangular or size 31.75 X 31.75 cm of 18 gauges. And top frame of size 3 cm. Frames welded by mig welding process. Frames are powder coated with minimum thickness of 50 microns. Tabletop is 25mm thick phenol bonded particleboard mounted on 1mm thick laminate. Top Backing sheet 0.5 mm thick to glued below the tabletop using good adhesive. All exposed edges are bonded Using EVA hot melt glue at 200oc on the machine with PVC tapes. Hardware of good quality, height to the table is 0.76meter. Each 3.00 147262.50 441788

13 Item-13 FOOT STOOLS. Foot Step: A double foot step shall be to the examination table conveniently. Step Made of 1.2 mm (18G) ---- CRCA sheet. Welded on Ms tubular frame of 25.4mmx1.22 mm(18G) fitted with aluminum tread flats of size: 510mm (L) x 450 mm(W) for both steps x 2.00 mm thick fitted by aluminum pop rivet. Aluminum sheet is confirming to IS 757:2008 Each 3.00 39466.35 118399

14 Item-14 FILING CABINETS (FORRECORDS). The 4 Drawer Lateral Filing Cabinet 3.0 Ft provides ample storage space for all your filing requirements. Engineered with an ultimate finished look and versatile functionalities, the 4 Drawer Filing Cabinet 3.0 Ft (With PF top) offers a user-friendly experience. It is designed to work coherently providing easy storage, identification and handling of files. Its anti-tipping safety which prevents the unit from toppling over while its locking mechanism protects the contents from prying eyes. The sturdy architecture provides immense strength and stability to the storage unit. For smooth drawer movements, the 4 Drawer L Filing Cabinet 3.0 Ft comes with ball slides fitted in each drawer. In a nutshell. Each 3.00 44767.80 134303

15 Item-15 M.R.D.REQUIREMENTS (RECORD ROOM USE). Computer system-1 Printer ink mount mono colour-1 Fast scanner-1 Fling rack-2 Filing cabinet-1 Each 3.00 24740.10 74220

16 Item-16 PAEDIATRIC COTS WITH RAILINGS. Scope: This specification is for the requirement of Iron Cots suitable for children in hospitals. Dimensions: Over all dimensions of Cot of size top frame shall be Length 1350 mm, Width 750 mm and Height 600 mm. The various tubes used in manufacture of Iron cots should have the following outside diameter and thickness. Component : Outside dia (mm) Thickness (mm) a. Bows outer CR Tubes -38.10.mm 1.22 mm b. Cross C.R Tubes 25.40 mm X 1.22 mm c. Filling C.R Tubes 19.05 mm X 1.22 mm Material: 1. Frame work shall be of C.R sheets conforming to IS: 513 D quality. 2. Bows & Tubes: These shall be made from C.R steel tubes. 3. Shoes: These shall be manufactured from hard rubber/PVC of uniform texture. 4. It shall be chemically inactive to mild acid. Rubber Iron Cot and the patient. Nominal height of the shoe shall be 35 mm. Manufacture: 1. Head end: Construction of the head end shall comply to meet requirement given Side railing frame top and bottom 25.4 mm CR tube 1.22 mm thickness and filling tubes 19 mm 1.22mm thickness between 100 mm gap up and down system 4 nos Right& Left last pipe SSGrade 304. 2. Bows shall be manufactured from steel tubes. It shall be bent, with inside radius of not more than 150 mm at top 2 corners. Bracket shall be welded with the bows vertical upright members which allows frame to rest on it and frame shall be securely fastened with the help of two bolts at each corner. 3. Cross Tube: One horizontal cross tube for making the structure of the bow rigid shall be welded between the vertical upright members of the bows. Cross tube shall be welded below the sleeping level at a height of 300 mm from the bottom. 4. Filling Tubes Foot end Bow: CR sheet top. Both rows of 1060 mm H with horizontal support. Seven vertical supports. Full length drop side rails. Provision for mosquito net poles. Mattress Platform: This shall comply with the requirements given below: The bed frame shall be made from C.R. sheet double bent. It should be reinforced with Two formed channels to size 20 x 50 x 50 x 50 x 20 mm 1.25 thickness flanges welded inside the length wise Each 2.00 33575.85 67152

17 Item-17 CRADLE. MS tubular frame work mounted on strong rubber shoes. Stand Fitted with PVC stumps Wire mesh hanging cradle Pre-treated and Epoxy Powder coated. Size : 36\" x 15\" x 39\" , Height upto CRIB top 98 cms. Optional Accessories: 50 mm dia castors. Each 3.00 64795.50 194387

18 Item-18 HOSPITAL COTS (ISI/ISO MODEL). Overall Approxdimensions : 2090mm L x 910mm W x 600 mm H , Bed frame Approx Dimension :1980mm L x 910mm W ,pre-treated and Powder coated , Option for Finish Sockets for Mosquito Net Ploes , Top Frame Supported with firm Bottom for sturdy Top frame. . Top sheet 16 SWG CRCA sheet. With with Head and Foot End Frames detachable , Provided with Mattress Arrester and Legs fitted with Nylon Rubber shoes. With S.S IV Pole (ISO and CE Certified) Each 3.00 19438.65 58316

19 Item-19 HOSPITAL COTS PAEDIATRIC (ISI/ISO) MODEL). Scope: This specification is for the requirement of Iron Cots suitable for children in hospitals. Dimensions: Over all dimensions of Cot of size top frame shall be Length 1350 mm, Width 750 mm and Height 600 mm. The various tubes used in manufacture of Iron cots should have the following outside diameter and thickness. Component : Outside dia (mm) Thickness (mm) a. Bows outer CR Tubes -38.10.mm 1.22 mm b. Cross C.R Tubes 25.40 mm X 1.22 mm c. Filling C.R Tubes 19.05 mm X 1.22 mm Material: 1. Frame work shall be of C.R sheets conforming to IS: 513 D quality. 2. Bows & Tubes: These shall be made from C.R steel tubes. 3. Shoes: These shall be manufactured from hard rubber/PVC of uniform texture. 4. It shall be chemically inactive to mild acid. Rubber Iron Cot and the patient. Nominal height of the shoe shall be 35 mm. Manufacture: 1. Head end: Construction of the head end shall comply to meet requirement given Side railing frame top and bottom 25.4 mm CR tube 1.22 mm thickness and filling tubes 19 mm 1.22mm thickness between 100 mm gap up and down system 4 nos Right& Left last pipe SSGrade 304. 2. Bows shall be manufactured from steel tubes. It shall be bent, with inside radius of not more than 150 mm at top 2 corners. Bracket shall be welded with the bows vertical upright members which allows frame to rest on it and frame shall be securely fastened with the help of two bolts at each corner. 3. Cross Tube: One horizontal cross tube for making the structure of the bow rigid shall be welded between the vertical upright members of the bows. Cross tube shall be welded below the sleeping level at a height of 300 mm from the bottom. 4. Filling Tubes Foot end Bow: CR sheet top. Both rows of 1060 mm H with horizontal support. Seven vertical supports. Full length drop side rails. Provision for mosquito net poles. Mattress Platform: This shall comply with the requirements given below: The bed frame shall be made from C.R. sheet double bent. It should be reinforced with Two formed channels to size 20 x 50 x 50 x 50 x 20 mm 1.25 thickness flanges welded inside the length wise. Each 2.00 210290.82 420582

20 Item-20 BACKREST. Back rest made up ss with lift Tilt mechanism Synchronic tilt mechanism, Tilt working with torsion bar mechanism, Active bio synchro mechanism, Locking mechanism 3 Position locking Each 1.00 91891.80 91892

21 Item-21 DRESSING TROLLEY (SS). Overall size : Size: 680mm L x 450mm W x 900mm H. Stainless steel tubular frame work made of 25.4mm OD x 18 G verticals mounted on 125mm dia non –rusting castor two with brakes. Castor made from high grade non floor-staining synthetic materials with integrated thread guards. Wheel centre having precision ball bearing to run smoothly. Two stainless steel shelves of 20g thickness, with protective railings on three sides. The railing shall be made from dia 12mm S.S.tube..Attached with suitable bowl & bucket. Only 304 grade stainless steel should be used for trolley frame work and burr free SS shelves. SS parts finished with Matt Polish. Supplied in SKD condition. All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2008 ) Each 5.00 8011.08 40055

22 Item-22 MEDICINE ALMIRAH. AlmeraWith Glass Door: Mechanical dimensions: 1980mm (Height) x 915mm (Width) x 485mm (Depth). Steel: The steel used for manufacturing the cupboards should be of prime quality, cold rolled, close annealed steel and treated with anti-corrosion treatment for durability in sea shore atmosphere. No of partitions: Inside partition comprising of 5 adjustable horizontal shelves. Lock: Three way bolting device with a rugged handle and a 6 lever lock with 3 keys, glass fitted door, locking facility. The design of Glass door cabinet shall be as above in the figure.CR sheet 1.0mm thick Confirming to IS-513. Shelf 4 nos. forming five compartments. Edge first bending 30mm and second edge bend 8mm and depth of shelf 400mm. Plain tranperent glass 5mm/4.5mm thick on each side of door with suitable cushion pads. The glasses shall fit in an additional frame of top section which is fixed to shutter frame from inside. Machine made lever plate with brass bush or machine made six lever type patla,which is fixed in height wise or width wise of cabinet. Lever rod 10mm round. Hinges and brackets three nos. on each side size 75Hx1.60mm thick mm and 1.6mm thick sheet for brackets. Die cast handle door metallic, nickel;/chrome plate with double nut. Key cover of best quality metallic , nickel/chrome. Lock-Godrej Type cabinet lock / Grace 6 Lever. Leg 75 x 75mm duly welded are riveted Each 2.00 76576.50 153153

23 Item-23 ICU COT. I.C.U. BED (MANUALLY OPERATED) Overall Size: Approx 2160mm L x 1020 mm W x 520 mm To 750 mm H (Without Mattress). Bed Platform frame size Approx 2070mmL x 960mm W Mattress Platform size : 1900mm L x 865mm W Five section Poly Propylene detachable top fitted on four section top bed frame with transverse and raised cup designs to prevent mattress slippage and for easy breathing of mattress. Backrest and leg rest both shall have detachable mattress guards. (3nos on each section respectively.) Manual adjustments : Height, backrest, kneerest and trendelenberg / Reverse trendelenburg thru four screw systems with thrust bearings individually manouvred by a single handle. Backrest and kneerest shall retract as they are individually raised. Degree indicator required for backrest, kneerest Trendelenburg / Reverse trendelenburg positions on both side with provision for I.V. Rod. Backrest and Height operating systems shall have a counter load balancing mechanism. Back rest - min 45 % of the frame length. Bed frame made from 50x25mm x 2 mm Thick ERW tube shall have proper support. This frame shall be fitted on the base frame mainly made of 60 x 30 x 1.6mm ERW tubes on various supporting links. The base frame shall be mounted on 125mm dia non-rusting high grade castor wheels two with brakes and two without brake. Castor wheels made from high grade non floor-staining synthetic materials with integrated thread guards. Wheel centre having precision ball bearing to run smoothly. Sturdy Full length Swing Down Type Side Railings to be provided. The bed shall have easily detachable moulded head and foot side panels. Four corner rubber buffers. There shall be four locations on the bed near corners of the bed to hold stainless steel Telescopic Saline rod 12mm dia with 31.7mm dia, 18 g stainless steel outer covering tube with a knob to mount syringe pump. With 4 Inches thick PU Foam 40 Density Foam mattress. Finishing workmanship in the medical furniture is of prime importance and must be of high standard. All corners shall be rounded off so that there shall be no sharp corners and holes should be burr free M.S. tubular parts, linkages, flats are to be In-house, pretreated, shot blasted and Epoxy powder coated as per ISI standards, 50 to 60 microns. Each 1.00 150796.80 150797

24 Item-24 BED SIDE SCREEN. Three Fold Screen with Curtain Cloth – Overall Size: 1680mm L x 2450 mm W. Tubular frame work made from 25.4mm dia x 1.2mm ERW tube. Base tubular made from dia 25.4mm x1.2mm tube. Fitted with 50mm dia non-rusting castor. Middle frame 1220mm side frame 610mm each frame with four hooks. All MS parts are 8 tank Pretreated & powder coated. Mounted on 6nos 2” Nylon castor wheels All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2008 Each 1.00 178734.60 178735

25 Item-25 MEDICINE TROLLEY (SS). 1) Frame work made from SS steel material. 2) Flat top of SS and at least 6 inch deep removable bucket at bottom. 3) Should have multiple long drawers to hold drug strips made of high quality epoxy plastic or steel material with convenient and smooth slide in and slide out motion(At least 28-32 separate drawers in about six to eight row) 4) The front of the each drawer should be half covered on which removable medicine label can be pasted and upper half open to see content inside. 5) Approx. size 750(L) x 450(W) x850(H) mm. 6) All stainless steel should 304grade/ 16 gauge. 7) Should be equipped with Waste bin, needle disposable container, file cassette & guard rails equipped with lock key system Swivel noiseless caster with brakes 10 cm diameter Each 3.00 178734.60 536204

26 Item-26 CASE SHEET HOLDERS WITH CLIP (SS). Case Sheet Holders with clip (SS) 60 2,000 1,20,000 Specification Not Available Each 1.00 300415.50 300416

27 Item-27 BED SIDE LOCKERS (SS). – Overall size: 400 mm x 400 mm x 820 mm H. Body consisting of 2 sides and back, is made from one piece of 20 G ms CRCA sheet. Fitted with laminated top with raised edges on four sides and pressed with PVC foil. Drawer front and cabinet door also made from laminated material and pressed with PVC foil. PVC foil used is of scratch-resistant and UV-rays resistant of 400 microns thick. One drawer 90mm H x 355 mm W x 380mmD approx fitted with very smooth slides, is provided below the top. Under the drawer is an open storage space and below it is a closed-door cabinet. Door of the cabinet box is pivoted at top and bottom. Base of the drawer is fitted with castors of wheel dia 50 mm, all without brake. Two buffers shall be provided at rear side of the locker box. All MS parts are passed through 8 tank Pretreatment and should be Epoxy powder coated. SS parts finished with Matt Polish. All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2008 Each 10.00 589.05 5891

28 Item-28 EXAMINATION COUCH (SS). Examination Couch – Overall size: 1890 mm L x 560mm W x 840mm H. Fixed rexine upholstered top 64mm thick in two sections. Body frame work made from 20G CRCA sheet and 20mmx 40mmx 16 G. MS. Rectangular Tubes. Couch fitted with stainless steel Legs & powder coated. Headrest adjustable on gas spring. Upper section of box approx size 1220 mm L x 460 mm W x 630 mm H with three sliding drawers of approx size 320 mm L x 430 mm W x 75 mm H. Lower section comprises of three cabinets of approx inside size 350 mm L x 440 mm W x 430mm H with separate doors & two with lock. Sliding foot step under the front side of lower middle cabinet. B.P. apparatus tray made of 18 G MS sheet of approx size 350 mm L x 120 mm W X 20 mm H provided on a swinging rod rotating through a bush fixed on the body of the couch. All MS parts and 8 tank Pretreated & powder coated & SS parts finished with Matt polish. All Process Parameters to be as per documented IMS Procedures for Quality. Each 2.00 148440.60 296881

29 Item-29 INSTRUMENT TROLLEY (SS). Overall size : Size: 680mm L x 450mm W x 900mm H. Stainless steel tubular frame work made of 25.4mm OD x 18 G verticals mounted on 125mm dia non–rusting castor two with brakes. Castor made from high grade non floor-staining synthetic materials with integrated thread guards. Wheel centre having precision ball bearing to run smoothly. Two stainless steel shelves of 20g thickness, with protective railings on three sides. The railing shall be made from dia 10mm S.S.rod. Only 304 grade stainless steel should be used for trolley frame work and burr free SS shelves. SS parts finished with Matt Polish. Supplied in SKD condition. All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2008). Each 1.00 412335.00 412335

30 Item-30 INSTRUMENT TROLLEY MAYOS (SS). Overall size : Size: 680mm L x 450mm W x 900mm H. Stainless steel tubular frame work made of 25.4mm OD x 18 G verticals mounted on 125mm dia non–rusting castor two with brakes. Castor made from high grade non floor-staining synthetic materials with integrated thread guards. Wheel centre having precision ball bearing to run smoothly. Two stainless steel shelves of 20g thickness, with protective railings on three sides. The railing shall be made from dia 10mm S.S.rod. Only 304 grade stainless steel should be used for trolley frame work and burr free SS shelves. SS parts finished with Matt Polish. Supplied in SKD condition. All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2008). Each 6.00 6597.36 39584

31 Item-31 STRETCHER/ PATIENCE TROLLEY (SS). 213L x 56W x 81H cms. Frame work made of 31 mm x 1.60 mm vertical &amp; 25 mm x 1.22 mm horizontal CRC tubes Trolley mounted on 15 cmsdia castors – 2 with brakes. Removable stretcher top made of 1.22 mm SS with S.S. handle at both end with 25mm thick suitable rubber Mattress covered with good quality Rexene. Arrangement to fit a oxygen cylinder. All mild steel components should be thoroughly Pretreated chemically to remove rust and foreign matter like Grease, Oil etc. by dip tank process pretreatment system. The treated Metal Surface should have coating of Epoxy Polyester Powder and oven baked at 180 degree to 200 degree Centigrade to avoid contamination of the clean metal surface from dust particles. Each 3.00 6832.98 20499

32 Item-32 INSTRUMENT TRAY (SS) ASSORTED. SS 304 Grade Surgical Instruments tray with cover Size. 227mmx152mmx48mm -2 SS 304 Grade surgical Instruments tray with cover Size 271mmx177mmx48mm -2 SS 304 Grade Surgical Instrument tray with lid Size 376mmx300mmx48mm-2 SS 304 Surgical Instrument tray with lid Size 352 mmx251mmx48mm -2 SS 304 Surgical Instrument tray without lid solid Size 460mmx 350mmx80mm-2 Each 1.00 42411.60 42412

33 Item-33 KIDNEY TRAY (SS) ASSORTED. Grade: Specify the grade of stainless steel, e.g., S.S. 304 (18/8). Thickness of the thickness of the stainless steel 0.5mm. Surface Finish: should be the surface finish, polished . Rust Resistance: that the material must be rust-free and durable. Sizes 6’,8’10’,12’ - 2 no each Each 2.00 41233.50 82467

34 Item-34 BASIN ASSORTED(SS). Stainless steel 304 or 316 grade, durable, non-porous, and autoclavable Sizes small , medium and large-2 no each Each 2.00 32986.80 65974

35 Item-35 (2 BASINTYPE). 1) Four legs base mounted on 5 cm dia. castor. 2) 2 Basins should be made of Stainless Steel of 304 grade 3) Pre-treated and Epoxy powder coated tubular frame Each 2.00 195093.36 390187

36 Item-36 (1 BASINTYPE). 1. Complete SS, four leg frame 2. Stainless steel tube frame 25.44 mm x1.2 mm 3. Basin support 12.7mm x 1.02 mm 4. Suitable for 350mm diameter basin bowl 5. Approximate dimension H 820 X W 440 mm 6. Should have tie plate Each 2.00 42411.60 84823

39 Item-39 DELIVERY TABLE (SS FULL). 1. Should have a SS table top with all edges smoothly finished 2. Should have a dimension of L 180 X W 70 X H 80 cm 3. Should have a drainage hole of diameter 12cm-basin type and collecting tray of stainless steel 4. The U cut should have a diameter of 35 cm. 5. Should provide with a detachable saline stand having a provision for fixing four positions (Head end and middle position) on the cot. 6. Base should be mounted on four heavy duty rubber shoes. 7. 2” thick high density water-proof rubber foam mattress covered with Rexene foam cloth. 8. Leg end section can slide under the main section. Height adjustable pair of knee crutches (Adjustable lihotomy poles with straps). 9. Should be as per ISI standard. Note: The Stainless steel shall be of grade SS304. Note: Material test certificate for the proof of usage of SS304 shall be furnished along with invoice and the manufacturer shall also submit undertaking that the tested material is used for the construction of the equipments supplied. Each 1.00 76576.50 76577

40 Item-40 BLOOD DONOR TABLE Each 1.00 1041440.40 1041440

70 Item-70 3rd Charges at 1% Each 1.00 192525.00 192525

71 Item-71 Miscellaneous and rounding off Each 1.00 7065.62 7066

Estimate for Hospital Furnitures and Accessories for Kampli New 100 Beds Taluka Hospital, Under 2515 KKRDB Macro for the year 2024-25. (PWD/2025-26/IND0204)

SL. No. Item Code Item Name Unit Scheduled Quantity Unit Price Rs. Amount Rs.

1 Item-1 ANAESTHESIA WORK STATION. 4.Minute volume: A control adjusts the total inspiratory volume-per-minutedeliveryfromthebellowsshallbe>20 L/min. 5.Therespiratoryfrequencycanbesetwithinrangeof5- 60 breaths per minute. 6.Inspiratoryflow:Theflowrangeofgasthattheventilator is capable of delivering to the patient shall be 0-180 L/min. 7.Pressurelimitshallbeadjustableand<70preferredcm H2O. Unit should have PEEP of 0-20 cm H2O. 8.Theworkstationshouldbecapableofdeliveryoflowflow anesthesia. AnesthesiaMonitoringSpecifications: 1.Monitoringofvitalparameters:ECG,NIBP,SPO2,and Invasive Blood Pressure. 2.Twintemperaturemeasurementwithskinandcore temperature probes—Twosetswitheachmonitor. 3.Automaticidentificationandmeasurementofanesthetic agents EtCO2, 02, and N2O and MAC value. FiO2 measurement. 3.Facilitytostoresnapshotsduringcriticaleventsfor waveform review at a later stage. 4.Audiovisualandgradedalarmingsystem. Displayof Ventilator: Modeofventilationtobedisplayed,Respiratoryrate,flow, pressure also to be displayed. 220+/- 10%VAC,50Hz Yes,atleast30minutesbackup. Stabilizertobeprovidedfor protection. Tobespecifiedbyserviceprovider. 1.Circleabsorber—01No. 2.VaporizerHalothene—01No. 3.VaporizerDesflurane—01No. 4.Vaporizerisoflurane—01No. 5.Vaporizersevoflurane—01No. 6.AdultandPediatricautoclavable siliconebreathingcircuits—2 each. 7.ReusableIBPcable -04. 8.Humidifiers—1No 9.Disposabletransducer—100 10.TemperatureProbeSkinreusable—02. 12.Temperaturecorereusable-04(02-Adults,02-paediatrics) 13.Depthofanesthesiasensors—50 14.Accessoriesforneuromusculartransmissionmonitor-01set. 15.Standardaccess Each 1.00 2650725.00 2650725

2 Item-2 DOCTOR'S TABLE. Size :1200 X 750 X 750 BEECH with 2 drawer hanging unit, Size: 400 X 400 X 300, Table Top: Table tops made of 25mm (minimum)Prelaminated particle board of E-1 Grade Conforming to IS : 12823 of desired color with PVC edge banding. All exposed edge sealed by 2mm (minimum)thick PVC Imported edge Banding. Table Top Support: 18 mm thick PLB gable ends & 18 modesty Panel. Each 10.00 33734.50 337345

3 Item-3 DUTY TABLE FOR NURSES. Size of the Top : 4’x3’ Made out of pre-laminated particleboard with special top surface, metal 3 nos. drawers on right side slide. smoothly on roller bearings. Flush drawers have single key locking facility for 3 drawers. Table legs are made out of ERW steel tube, rectangular or size 31.75 X 31.75 cm of 18 gauges. And top frame of size 3 cm. Frames welded by mig welding process. Frames are powder coated with minimum thickness of 50 microns. Tabletop is 25mm thick phenol bonded particleboard mounted on 1mm thick laminate. Top Backing sheet 0.5 mm thick to glued below the tabletop using good adhesive. All exposed edges are bonded Using EVA hot melt glue at 200oc on the machine with PVC tapes. Hardware of good quality, height to the table is 0.76meter. Each 3.00 33046.12 99138

4 Item-4 TABLE FOR STERILIZATION USE (MEDIUM). Size of the Top : 4’x2’ without drawer Made out of pre-laminated particleboard with special top surface,. Table legs are made out of ERW steel tube, rectangular or size 31.75 X 31.75 cm of 18 gauges. And top frame of size 3 cm. Frames welded by mig welding process. Frames are powder coated with minimum thickness of 50 microns. Tabletop is 25mm thick phenol bonded particleboard mounted on 1mm thick laminate. Top Backing sheet 0.5 mm thick to glued below the tabletop using good adhesive. All exposed edges are bonded Using EVA hot melt glue at 200oc on the machine with PVC tapes. Hardware of good quality, height to the table is 0.76meter Each 6.00 32357.58 194145

5 Item-5 LONG BENCHES (6½'X1½'). The product should be in complete knock down structure as much as possible /feasible enabling ease in transportation and assemblies with class rooms. The panels are made from 18±1mm thk Pre-laminated board with 2 mm PVC edge banding on all sides. Seat height shall be 437mm, The under structure is made of ERW Tube (IS 7138) 25.4±0.3 mm x 25.4±0.3 mm x 1.29+/-0.096 mm (16 gauge) thick powder coated 50 microns (±10) at base which are welded to the desk and seat supports that are made of MS angle sections 30±1 mm x 30±1 mm x 3.0 ±0.25mm thick (IS 2062 Equivalent) powder coated 50 microns(±10). Each 20.00 20653.78 413076

6 Item-6 STOOLS REVOLVING. Revolving Stool – Overall Approx Size: 480mm To 670mm H. Tubular tripod base of 25.4 x 14 g ERW tube with revolving SS top. Height adjustment by screw. 300mm dia The legs fitted with high quality PVC shoes with nylon reinforcement. Left leg 384mm All SS parts finished with Matt polish. All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2008 Each 10.00 6884.19 68842

7 Item-7 STEEL CUP-BOARD. Size 72” x 36” x 19” with 4 shelves to be fixed having 5 compartments, double door with three way locking device with duplicate keys made out of CRCA sheet of 18 gauge with de rusted Powder Coated Siemens gray colour paint. The edges of doors and shelves should be properly bent to U shape neatly and finished Multi bend construction and inter locking design and full length over lapping doors and side. Three way bolting mechanism. Spot welding & Co2 welding. Anticorrosion treated components and oven baked painting process. a. Top, bottom, LH & RH sides and back material thickness- 1 mm b. Removable RH & LH main doors with stiffeners material thickness=1 mm c. Almeria’s to be provided with 4 full fixed shelves of inside shel Each 10.00 66092.08 660921

8 Item-8 RACKS–STEEL. Iron Rack Four Steps:Four side angled support of 14 gauge and four steps of plates with 16 gauge. Screw system for fixing the four plates for adjustable height with strong screw support. Strong non-wearable bush support for the angled side support. It should be open rack. Each 8.00 39930.62 319445

9 Item-9 PATIENTS WAITING CHAIRS (MOULDED). A unit of three seater perforated sheet type visitor chairs within built arm to be supplied as follows. Frame made out of M.S. Square 35x35 mm 16 gauges. Two Nos of vertical supports of 35x35 mm 16 gauge square on each side to be provided interconnected by a cross member of same dimension. Two Nos. of horizontal supports of M.S. 35x35 mm 16 gauge 40 cm length to be provided at the bottom. Three chairs to be mounted on the frame with suitable bolts. Provision of suitable moulded studs to be incorporated at the bottom of seats for rigid mounting. Dimensions of seat is as follows. Seat weight - 30-40cm Seat length - 37-40cm Seat width - 58-60cm Each 30.00 25472.99 764190

10 Item-10 ATTENDANTS COTS. This specification is for Iron Cots suitable for general purpose in hospitals. Dimensions: Over all dimensions of Cot of size top frame shall be Length 1800 mm, Width 600 mm and Height 400 mm. The various tubes used in manufacture of Iron cots should have the following outside diameter and thickness. Component outsidedia (mm) Thickness (mm) a. Four Legs rectangular: 75 x 25 x1.60 mm thickness b. Four Legs rectangular: 75 x 25 x1.60 mm thickness c. Cross Tubes CR Tubes: 25X25 mm Sq 1.22mm Thickness The MS Flat for top shall be inside all four sides of size 50X3 mm minimum thickness of 3.0 mm. Material: Frame work shall be of CR sheets conforming to IS: 513 D quality. Bows & Rectangle & square Tubes: These shall be made from CR steel tubes. Shoes: These shall be manufactured from PVC Shoes. Nominal height of the shoe shall be 35 mm. Outside dimensions of 3mm. Manufacture: Manufacture The bed frame shall be made from C.R. sheet double bent. It should be reinforced with two formed channels to size 20 x 50 x 50 x 50 x 20 mm of 1.25mm thickness flanges welded inside the length wise. Mattresses: Overall Sizes of Mattresses is (L) 1800 mm x (W) 600 mm x (H) 75 mm of PU foam of 40 density, covered with ST rexine properly stitched. Each 4.00 16798.40 67194

11 Item-11 OFFICE CHAIRS. Executive chairs (revolving mode) with arms Approx. dimensions seat depth - 480-500 mm Seat width - 480-500 mm Back height with foam seat - 500-520 mm Total height of chair with height adjustment - 950-1050 mm 5 star gravity alluminium die cast, base made from high quality material confirming to I.S. 6051/1970. Base should have 5 Nos. specially designed twin wheel castors (castors to be abrasive resistant and resistant free movement on carpets). Manual seat height adjustment and lockable at any suitable height. The chair should have tilting mechanism. The structure of the mechanism is manufactured out of CRC steel sheet. The seating structure is made of ERW tubular structure upholstery to be made of polyurethane foam of 55 density thickness 37 mm backed by 1” Kurl on. Arms of the chair are to be made of moulded polyurethane arm with steel insert for long life Each 4.00 24784.53 99138

12 Item-12 OFFICETABLE. Size of the Top : 4’x3’ Made out of pre-laminated particleboard with special top surface, metal 3 nos. drawers on right side slide. smoothly on roller bearings. Flush drawers have single key locking facility for 3 drawers. Table legs are made out of ERW steel tube, rectangular or size 31.75 X 31.75 cm of 18 gauges. And top frame of size 3 cm. Frames welded by mig welding process. Frames are powder coated with minimum thickness of 50 microns. Tabletop is 25mm thick phenol bonded particleboard mounted on 1mm thick laminate. Top Backing sheet 0.5 mm thick to glued below the tabletop using good adhesive. All exposed edges are bonded Using EVA hot melt glue at 200oc on the machine with PVC tapes. Hardware of good quality, height to the table is 0.76meter. Each 4.00 24784.53 99138

13 Item-13 FOOT STOOLS. Foot Step: A double foot step shall be to the examination table conveniently. Step Made of 1.2 mm (18G) ---- CRCA sheet. Welded on Ms tubular frame of 25.4mmx1.22 mm(18G) fitted with aluminum tread flats of size: 510mm (L) x 450 mm(W) for both steps x 2.00 mm thick fitted by aluminum pop rivet. Aluminum sheet is confirming to IS 757:2008 Each 12.00 4819.21 57831

14 Item-14 FILING CABINETS (FORRECORDS). The 4 Drawer Lateral Filing Cabinet 3.0 Ft provides ample storage space for all your filing requirements. Engineered with an ultimate finished look and versatile functionalities, the 4 Drawer Filing Cabinet 3.0 Ft (With PF top) offers a user-friendly experience. It is designed to work coherently providing easy storage, identification and handling of files. Its anti-tipping safety which prevents the unit from toppling over while its locking mechanism protects the contents from prying eyes. The sturdy architecture provides immense strength and stability to the storage unit. For smooth drawer movements, the 4 Drawer L Filing Cabinet 3.0 Ft comes with ball slides fitted in each drawer. In a nutshell. Each 6.00 44749.85 268499

15 Item-15 M.R.D.REQUIREMENTS (RECORD ROOM USE). Computer system-1 Printer ink mount mono colour-1 Fast scanner-1 Fling rack-2 Filing cabinet-1 Each 1.00 309806.64 309807

16 Item-16 PAEDIATRIC COTS WITH RAILINGS. Scope: This specification is for the requirement of Iron Cots suitable for children in hospitals. Dimensions: Over all dimensions of Cot of size top frame shall be Length 1350 mm, Width 750 mm and Height 600 mm. The various tubes used in manufacture of Iron cots should have the following outside diameter and thickness. Component : Outside dia (mm) Thickness (mm) a. Bows outer CR Tubes -38.10.mm 1.22 mm b. Cross C.R Tubes 25.40 mm X 1.22 mm c. Filling C.R Tubes 19.05 mm X 1.22 mm Material: 1. Frame work shall be of C.R sheets conforming to IS: 513 D quality. 2. Bows & Tubes: These shall be made from C.R steel tubes. 3. Shoes: These shall be manufactured from hard rubber/PVC of uniform texture. 4. It shall be chemically inactive to mild acid. Rubber Iron Cot and the patient. Nominal height of the shoe shall be 35 mm. Manufacture: 1. Head end: Construction of the head end shall comply to meet requirement given Side railing frame top and bottom 25.4 mm CR tube 1.22 mm thickness and filling tubes 19 mm 1.22mm thickness between 100 mm gap up and down system 4 nos Right& Left last pipe SSGrade 304. 2. Bows shall be manufactured from steel tubes. It shall be bent, with inside radius of not more than 150 mm at top 2 corners. Bracket shall be welded with the bows vertical upright members which allows frame to rest on it and frame shall be securely fastened with the help of two bolts at each corner. 3. Cross Tube: One horizontal cross tube for making the structure of the bow rigid shall be welded between the vertical upright members of the bows. Cross tube shall be welded below the sleeping level at a height of 300 mm from the bottom. 4. Filling Tubes Foot end Bow: CR sheet top. Both rows of 1060 mm H with horizontal support. Seven vertical supports. Full length drop side rails. Provision for mosquito net poles. Mattress Platform: This shall comply with the requirements given below: The bed frame shall be made from C.R. sheet double bent. It should be reinforced with Two formed channels to size 20 x 50 x 50 x 50 x 20 mm 1.25 thickness flanges welded inside the length wise Each 5.00 52322.90 261615

17 Item-17 CRADLE. MS tubular frame work mounted on strong rubber shoes. Stand Fitted with PVC stumps Wire mesh hanging cradle Pre-treated and Epoxy Powder coated. Size : 36\" x 15\" x 39\" , Height upto CRIB top 98 cms. Optional Accessories: 50 mm dia castors. Each 3.00 42882.24 128647

18 Item-18 HOSPITAL COTS (ISI/ISO MODEL). Overall Approxdimensions : 2090mm L x 910mm W x 600 mm H , Bed frame Approx Dimension :1980mm L x 910mm W ,pre-treated and Powder coated , Option for Finish Sockets for Mosquito Net Ploes , Top Frame Supported with firm Bottom for sturdy Top frame. . Top sheet 16 SWG CRCA sheet. With with Head and Foot End Frames detachable , Provided with Mattress Arrester and Legs fitted with Nylon Rubber shoes. With S.S IV Pole (ISO and CE Certified) Each 90.00 38966.79 3507011

19 Item-19 HOSPITAL COTS PAEDIATRIC (ISI/ISO) MODEL). Scope: This specification is for the requirement of Iron Cots suitable for children in hospitals. Dimensions: Over all dimensions of Cot of size top frame shall be Length 1350 mm, Width 750 mm and Height 600 mm. The various tubes used in manufacture of Iron cots should have the following outside diameter and thickness. Component : Outside dia (mm) Thickness (mm) a. Bows outer CR Tubes -38.10.mm 1.22 mm b. Cross C.R Tubes 25.40 mm X 1.22 mm c. Filling C.R Tubes 19.05 mm X 1.22 mm Material: 1. Frame work shall be of C.R sheets conforming to IS: 513 D quality. 2. Bows & Tubes: These shall be made from C.R steel tubes. 3. Shoes: These shall be manufactured from hard rubber/PVC of uniform texture. 4. It shall be chemically inactive to mild acid. Rubber Iron Cot and the patient. Nominal height of the shoe shall be 35 mm. Manufacture: 1. Head end: Construction of the head end shall comply to meet requirement given Side railing frame top and bottom 25.4 mm CR tube 1.22 mm thickness and filling tubes 19 mm 1.22mm thickness between 100 mm gap up and down system 4 nos Right& Left last pipe SSGrade 304. 2. Bows shall be manufactured from steel tubes. It shall be bent, with inside radius of not more than 150 mm at top 2 corners. Bracket shall be welded with the bows vertical upright members which allows frame to rest on it and frame shall be securely fastened with the help of two bolts at each corner. 3. Cross Tube: One horizontal cross tube for making the structure of the bow rigid shall be welded between the vertical upright members of the bows. Cross tube shall be welded below the sleeping level at a height of 300 mm from the bottom. 4. Filling Tubes Foot end Bow: CR sheet top. Both rows of 1060 mm H with horizontal support. Seven vertical supports. Full length drop side rails. Provision for mosquito net poles. Mattress Platform: This shall comply with the requirements given below: The bed frame shall be made from C.R. sheet double bent. It should be reinforced with Two formed channels to size 20 x 50 x 50 x 50 x 20 mm 1.25 thickness flanges welded inside the length wise. Each 10.00 48192.14 481921

20 Item-20 BACKREST. Back rest made up ss with lift Tilt mechanism Synchronic tilt mechanism, Tilt working with torsion bar mechanism, Active bio synchro mechanism, Locking mechanism 3 Position locking Each 4.00 6609.20 26437

21 Item-21 DRESSING TROLLEY (SS). Overall size : Size: 680mm L x 450mm W x 900mm H. Stainless steel tubular frame work made of 25.4mm OD x 18 G verticals mounted on 125mm dia non –rusting castor two with brakes. Castor made from high grade non floor-staining synthetic materials with integrated thread guards. Wheel centre having precision ball bearing to run smoothly. Two stainless steel shelves of 20g thickness, with protective railings on three sides. The railing shall be made from dia 12mm S.S.tube..Attached with suitable bowl & bucket. Only 304 grade stainless steel should be used for trolley frame work and burr free SS shelves. SS parts finished with Matt Polish. Supplied in SKD condition. All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2008 ) Each 5.00 30980.66 154903

22 Item-22 MEDICINE ALMIRAH. AlmeraWith Glass Door: Mechanical dimensions: 1980mm (Height) x 915mm (Width) x 485mm (Depth). Steel: The steel used for manufacturing the cupboards should be of prime quality, cold rolled, close annealed steel and treated with anti-corrosion treatment for durability in sea shore atmosphere. No of partitions: Inside partition comprising of 5 adjustable horizontal shelves. Lock: Three way bolting device with a rugged handle and a 6 lever lock with 3 keys, glass fitted door, locking facility. The design of Glass door cabinet shall be as above in the figure.CR sheet 1.0mm thick Confirming to IS-513. Shelf 4 nos. forming five compartments. Edge first bending 30mm and second edge bend 8mm and depth of shelf 400mm. Plain tranperent glass 5mm/4.5mm thick on each side of door with suitable cushion pads. The glasses shall fit in an additional frame of top section which is fixed to shutter frame from inside. Machine made lever plate with brass bush or machine made six lever type patla,which is fixed in height wise or width wise of cabinet. Lever rod 10mm round. Hinges and brackets three nos. on each side size 75Hx1.60mm thick mm and 1.6mm thick sheet for brackets. Die cast handle door metallic, nickel;/chrome plate with double nut. Key cover of best quality metallic , nickel/chrome. Lock-Godrej Type cabinet lock / Grace 6 Lever. Leg 75 x 75mm duly welded are riveted Each 2.00 93630.45 187261

23 Item-23 ICU COT. I.C.U. BED (MANUALLY OPERATED) Overall Size: Approx 2160mm L x 1020 mm W x 520 mm To 750 mm H (Without Mattress). Bed Platform frame size Approx 2070mmL x 960mm W Mattress Platform size : 1900mm L x 865mm W Five section Poly Propylene detachable top fitted on four section top bed frame with transverse and raised cup designs to prevent mattress slippage and for easy breathing of mattress. Backrest and leg rest both shall have detachable mattress guards. (3nos on each section respectively.) Manual adjustments : Height, backrest, kneerest and trendelenberg / Reverse trendelenburg thru four screw systems with thrust bearings individually manouvred by a single handle. Backrest and kneerest shall retract as they are individually raised. Degree indicator required for backrest, kneerest Trendelenburg / Reverse trendelenburg positions on both side with provision for I.V. Rod. Backrest and Height operating systems shall have a counter load balancing mechanism. Back rest - min 45 % of the frame length. Bed frame made from 50x25mm x 2 mm Thick ERW tube shall have proper support. This frame shall be fitted on the base frame mainly made of 60 x 30 x 1.6mm ERW tubes on various supporting links. The base frame shall be mounted on 125mm dia non-rusting high grade castor wheels two with brakes and two without brake. Castor wheels made from high grade non floor-staining synthetic materials with integrated thread guards. Wheel centre having precision ball bearing to run smoothly. Sturdy Full length Swing Down Type Side Railings to be provided. The bed shall have easily detachable moulded head and foot side panels. Four corner rubber buffers. There shall be four locations on the bed near corners of the bed to hold stainless steel Telescopic Saline rod 12mm dia with 31.7mm dia, 18 g stainless steel outer covering tube with a knob to mount syringe pump. With 4 Inches thick PU Foam 40 Density Foam mattress. Finishing workmanship in the medical furniture is of prime importance and must be of high standard. All corners shall be rounded off so that there shall be no sharp corners and holes should be burr free M.S. tubular parts, linkages, flats are to be In-house, pretreated, shot blasted and Epoxy powder coated as per ISI standards, 50 to 60 microns. Each 10.00 130807.25 1308073

24 Item-24 BED SIDE SCREEN. Three Fold Screen with Curtain Cloth – Overall Size: 1680mm L x 2450 mm W. Tubular frame work made from 25.4mm dia x 1.2mm ERW tube. Base tubular made from dia 25.4mm x1.2mm tube. Fitted with 50mm dia non-rusting castor. Middle frame 1220mm side frame 610mm each frame with four hooks. All MS parts are 8 tank Pretreated & powder coated. Mounted on 6nos 2” Nylon castor wheels All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2008 Each 4.00 61961.33 247845

25 Item-25 MEDICINE TROLLEY (SS). 1) Frame work made from SS steel material. 2) Flat top of SS and at least 6 inch deep removable bucket at bottom. 3) Should have multiple long drawers to hold drug strips made of high quality epoxy plastic or steel material with convenient and smooth slide in and slide out motion(At least 28-32 separate drawers in about six to eight row) 4) The front of the each drawer should be half covered on which removable medicine label can be pasted and upper half open to see content inside. 5) Approx. size 750(L) x 450(W) x850(H) mm. 6) All stainless steel should 304grade/ 16 gauge. 7) Should be equipped with Waste bin, needle disposable container, file cassette & guard rails equipped with lock key system Swivel noiseless caster with brakes 10 cm diameter Each 6.00 66092.08 396552

26 Item-26 CASE SHEET HOLDERS WITH CLIP (SS). Case Sheet Holders with clip (SS) 60 2,000 1,20,000 Specification Not Available Each 50.00 6196.94 309847

27 Item-27 BED SIDE LOCKERS (SS). – Overall size: 400 mm x 400 mm x 820 mm H. Body consisting of 2 sides and back, is made from one piece of 20 G ms CRCA sheet. Fitted with laminated top with raised edges on four sides and pressed with PVC foil. Drawer front and cabinet door also made from laminated material and pressed with PVC foil. PVC foil used is of scratch-resistant and UV-rays resistant of 400 microns thick. One drawer 90mm H x 355 mm W x 380mmD approx fitted with very smooth slides, is provided below the top. Under the drawer is an open storage space and below it is a closed-door cabinet. Door of the cabinet box is pivoted at top and bottom. Base of the drawer is fitted with castors of wheel dia 50 mm, all without brake. Two buffers shall be provided at rear side of the locker box. All MS parts are passed through 8 tank Pretreatment and should be Epoxy powder coated. SS parts finished with Matt Polish. All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2008 Each 50.00 17211.48 860574

28 Item-28 EXAMINATION COUCH (SS). Examination Couch – Overall size: 1890 mm L x 560mm W x 840mm H. Fixed rexine upholstered top 64mm thick in two sections. Body frame work made from 20G CRCA sheet and 20mmx 40mmx 16 G. MS. Rectangular Tubes. Couch fitted with stainless steel Legs & powder coated. Headrest adjustable on gas spring. Upper section of box approx size 1220 mm L x 460 mm W x 630 mm H with three sliding drawers of approx size 320 mm L x 430 mm W x 75 mm H. Lower section comprises of three cabinets of approx inside size 350 mm L x 440 mm W x 430mm H with separate doors & two with lock. Sliding foot step under the front side of lower middle cabinet. B.P. apparatus tray made of 18 G MS sheet of approx size 350 mm L x 120 mm W X 20 mm H provided on a swinging rod rotating through a bush fixed on the body of the couch. All MS parts and 8 tank Pretreated & powder coated & SS parts finished with Matt polish. All Process Parameters to be as per documented IMS Procedures for Quality. Each 2.00 107399.64 214799

29 Item-29 INSTRUMENT TROLLEY (SS). Overall size : Size: 680mm L x 450mm W x 900mm H. Stainless steel tubular frame work made of 25.4mm OD x 18 G verticals mounted on 125mm dia non–rusting castor two with brakes. Castor made from high grade non floor-staining synthetic materials with integrated thread guards. Wheel centre having precision ball bearing to run smoothly. Two stainless steel shelves of 20g thickness, with protective railings on three sides. The railing shall be made from dia 10mm S.S.rod. Only 304 grade stainless steel should be used for trolley frame work and burr free SS shelves. SS parts finished with Matt Polish. Supplied in SKD condition. All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2008). Each 6.00 35541.71 213250

30 Item-30 INSTRUMENT TROLLEY MAYOS (SS). Overall size : Size: 680mm L x 450mm W x 900mm H. Stainless steel tubular frame work made of 25.4mm OD x 18 G verticals mounted on 125mm dia non–rusting castor two with brakes. Castor made from high grade non floor-staining synthetic materials with integrated thread guards. Wheel centre having precision ball bearing to run smoothly. Two stainless steel shelves of 20g thickness, with protective railings on three sides. The railing shall be made from dia 10mm S.S.rod. Only 304 grade stainless steel should be used for trolley frame work and burr free SS shelves. SS parts finished with Matt Polish. Supplied in SKD condition. All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2008). Each 4.00 34091.03 136364

31 Item-31 STRETCHER/ PATIENCE TROLLEY (SS). 213L x 56W x 81H cms. Frame work made of 31 mm x 1.60 mm vertical &amp; 25 mm x 1.22 mm horizontal CRC tubes Trolley mounted on 15 cmsdia castors – 2 with brakes. Removable stretcher top made of 1.22 mm SS with S.S. handle at both end with 25mm thick suitable rubber Mattress covered with good quality Rexene. Arrangement to fit a oxygen cylinder. All mild steel components should be thoroughly Pretreated chemically to remove rust and foreign matter like Grease, Oil etc. by dip tank process pretreatment system. The treated Metal Surface should have coating of Epoxy Polyester Powder and oven baked at 180 degree to 200 degree Centigrade to avoid contamination of the clean metal surface from dust particles. Each 3.00 66092.08 198276

32 Item-32 INSTRUMENT TRAY (SS) ASSORTED. SS 304 Grade Surgical Instruments tray with cover Size. 227mmx152mmx48mm -2 SS 304 Grade surgical Instruments tray with cover Size 271mmx177mmx48mm -2 SS 304 Grade Surgical Instrument tray with lid Size 376mmx300mmx48mm-2 SS 304 Surgical Instrument tray with lid Size 352 mmx251mmx48mm -2 SS 304 Surgical Instrument tray without lid solid Size 460mmx 350mmx80mm-2 Each 31.00 3267.27 101285

33 Item-33 KIDNEY TRAY (SS) ASSORTED. Grade: Specify the grade of stainless steel, e.g., S.S. 304 (18/8). Thickness of the thickness of the stainless steel 0.5mm. Surface Finish: should be the surface finish, polished . Rust Resistance: that the material must be rust-free and durable. Sizes 6’,8’10’,12’ - 2 no each Each 30.00 588.11 17643

34 Item-34 BASIN ASSORTED(SS). Stainless steel 304 or 316 grade, durable, non-porous, and autoclavable Sizes small , medium and large-2 no each Each 30.00 1074.00 32220

35 Item-35 (2 BASINTYPE). 1) Four legs base mounted on 5 cm dia. castor. 2) 2 Basins should be made of Stainless Steel of 304 grade 3) Pre-treated and Epoxy powder coated tubular frame Each 4.00 6884.59 27538

36 Item-36 (1 BASINTYPE). 1. Complete SS, four leg frame 2. Stainless steel tube frame 25.44 mm x1.2 mm 3. Basin support 12.7mm x 1.02 mm 4. Suitable for 350mm diameter basin bowl 5. Approximate dimension H 820 X W 440 mm 6. Should have tie plate Each 8.00 4956.91 39655

37 Item-37 DELIVERY TABLE (SS FULL). 1. Should have a SS table top with all edges smoothly finished 2. Should have a dimension of L 180 X W 70 X H 80 cm 3. Should have a drainage hole of diameter 12cm-basin type and collecting tray of stainless steel 4. The U cut should have a diameter of 35 cm. 5. Should provide with a detachable saline stand having a provision for fixing four positions (Head end and middle position) on the cot. 6. Base should be mounted on four heavy duty rubber shoes. 7. 2” thick high density water-proof rubber foam mattress covered with Rexene foam cloth. 8. Leg end section can slide under the main section. Height adjustable pair of knee crutches (Adjustable lihotomy poles with straps). 9. Should be as per ISI standard. Note: The Stainless steel shall be of grade SS304. Note: Material test certificate for the proof of usage of SS304 shall be furnished along with invoice and the manufacturer shall also submit undertaking that the tested material is used for the construction of the equipments supplied. Each 4.00 153153.00 612612

38 Item-38 BLOOD DONOR TABLE Each 2.00 147026.88 294054

39 Item-39 O2 CYLINDER TROLLEY (SS). Oxygen Trolley - Suitable for B type gas cylinder. MS tubular framework made of approx 25.4mmx18G MS. Round tube fitted with two rubber wheels, 100 mm dia. 2nos suitable holding clamps with suitable buffers to be provided for the cylinder during transportation Trolley provided with locking provision made of 6mm x 25mm thick M.S. flats. Trolley fitted with SS base of 14G sheet & epoxy powder finish. All MS parts are 8 tank Pretreated & powder coated. All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2008 ) Each 10.00 19827.62 198276

40 Item-40 URINAL MALE AND FEMALE. Capacity 20-30 Ltrs Specially molded projection for extra strength. High impact strength, rough and tough. Twist type lockable lid. Designed without sharp corners or welds. Light weight and easy to handle. Hygienic and easy to clean. Durability: Reusable, washable, absolutely smooth and sanitary to satisfy the critical needs of MSW Rules, 2016. 100% rust free and maintenance free. Material: Virgin Grade of High Molecular High Density Polyethylene (HMHDPE) material, absolutely nontoxic, free from any contamination, chemical resistant confirming to the requirement of ASTM D-543-04. Material Each 20.00 294.05 5881

41 Item-41 WASTE DISPOSAL-BIN /DRUMS. · Frame made by stainless steel with one side carry Handle. Each 3.00 7250.25 21751

42 Item-42 WASTE DISPOSAL- TROLLEY (SS). · Frame made by stainless steel with one side carry Handle. Each 3.00 49569.06 148707

43 Item-43 LINEN ALMIRAH. Plywood - Door and cabin shelves – 18 mm thick plywood finished with 0.8 mm thick lamination (Color – User choice) ,all four corner metal angle iron fixed and play wood fixed over the angle iron . Diamension : 1850X600X450 mm Handle - cabinet wardrobhandles Hinges - adjustable metal hinges (Door can be perfectly aligned slowly and softly) Glass Door- Glass - 6 mm thickness Each 3.00 77107.17 231322

44 Item-44 O2 CYLINDER WITH SPANNER WARD TYPE. oxygen B type cylinder ISI marked to IS 7285 (Part 2): 2004 duly approved from CCOE. The cylinder should be fitted with valve (nickel plated only) & valve guard having following broad specifications: 1. Minimum capacity: 1.43 cubic meter gas capacity and 10.2 lit water capacity. 2. Gas weight of a full cylinder: 1.8 kg 3. Neck threading: IS3224 1979 4. All cylinders to be properly painted as per respective colour code. The cylinder name, number, company and relevant warning from Gas cylinder rules 2004 should be clearly indicated on cylinder neck. 5. Each cylinder should have ring to indicate when the next testing of cylinder is due. 6.The (a) serial no (b) manufacturing code (c) working pressure (d) water capacity in lit (e) test pressure (f) manufacturing & testing year (g) tare weight must be engraved on the cylinder 7. cylinder should be supplied with flow meter regulator and spanner. 8. Cylinder should have ISI mark and ISO certificate for quality standard or BIS equivalent, IS 3224. Cylinder should have explosive safety certificate and should be provided along with each cylinder during installation. Certificate of calibration, PESO Certificate and inspection from the factory. Each 15.00 35799.89 536998

45 Item-45 DIET TROLLEY STAINLESS STEEL. OVER BED TABLE dor diet purpose Std. Each 6.00 60584.41 363506

46 Item-46 NEEDLE CUTTER AND MELTER. Needle syringe cutter and melter(destroyer) Electric. Each 12.00 7351.34 88216

47 Item-47 THERMOMETER CLINICAL. The measurement distance of this thermometer gun is between three to five cm.• The working temperature of this device is between 10 degrees Celcius to 40-degree Celcius. • This thermometer gun provides different backlight color based on the temperature of the body • This Thermometer gun has two units for the temperature measurement. • The units are Celcius and Fahrenheit. The accuracy of this Forehead thermometer gun is (+/-) 2-degree Celcius. Each 20.00 2082.89 41658

48 Item-48 THERMOMETER RECTAL. Measurement – don’t need to inform , clean and health avoid cross infection and fast measurement • Human body engineering design – strengthen his hand grip handle experience, and be convenient to measure • Body temperature measurement : 32.0-43°F / 90-109.4°F • Ambient temperature measurement : 0-60°C / 32-140°F • Measurement distance : 1 to 15cm (within 5cm is the best) • Auto-shutdown time : about 7s • Power supply : 2 x 1.5v AAA batteries. Each 3.00 294.05 882

49 Item-49 STORES ALMIRAH. Size 72” x 36” x 19” with 4 shelves to be fixed having 5 compartments, double door with three way locking device with duplicate keys made out of CRCA sheet of 18 gauge with de rusted Powder Coated Siemens gray colour paint. The edges of doors and shelves should be properly bent to U shape neatly and finished Multi bend construction and inter locking design and full length over lapping doors and side. Three way bolting mechanism. Spot welding & Co2 welding. Anticorrosion treated components and oven baked painting process. a. Top, bottom, LH & RH sides and back material thickness- 1 mm b. Removable RH & LH main doors with stiffeners material thickness=1 mm c. Almeria’s to be provided with 4 full fixed shelves of inside shelve size 1912 X 450 of thickness -1 mm Each 3.00 77107.43 231322

50 Item-50 ARM BOARD ADULT Each 10.00 3442.30 34423

51 Item-51 ARM BOARD CHILD Each 10.00 3442.30 34423

52 Item-52 SS BUCKET WITH LID Each 6.00 6196.13 37177

53 Item-53 BUCKET PLASTIC Each 9.00 826.15 7435

54 Item-54 AMBUBAGS. 1. Should have silicon rubber bellow 2. Should provide with face mask silicon rubber material and adapter 3. Should be supplied with a carry pouch. 4. It should have a bag volume of 2000 ml. 5. Should have an expiratory resistance of 2.2cms of water 6. Should have an inspiratory resistance of 3.3cms of water. 7. It should have controlled flow rates and ventilation, and with reduced airway pressure. 8. Should have a port in the bag to connect oxygen with reservoir bag. Each 10.00 826.15 8262

55 Item-55 TORCHLIGHT. The LED Torch using maintenance free rechargeable battery shall be having the following technical features: Fitted With 6V Maintenance Free SLA Battery 3 Watt Power LED Bright Light Throughout Lighting Time Using Constance Current Source Normal And Full Light SMPS Circuit-Input Range 100-280V Fast Charging Input 8-9 Hours Over Charging And Over Discharge Protection Each 4.00 1721.15 6885

56 Item-56 CHEATLES FORCEPS ASSORTED. For placing or removingor to lift/ pick sterilizedinstruments fromAutoclave/drum, Boilers, Formalincabinets and antisepticsolution,medicalgradessmaterial with length 10” Weightingms125 to 150, 150 to 175,and175 to 200 Convenient to Use,Firm Grip while holdingitems Corrosion resistant andfine finish Shape of the shank "S" Curved Curved serratedjaws/beaks. Each 8.00 3430.62 27445

57 Item-57 STOMACH WASH EQUIPMENT. Latex free Rubber tubeStomach Wash Tube - Rubber, 150 Cm With Bulb, Funnel, Plastic Mouth Gag - Red Color For Gastric Wash. Each 2.00 35799.89 71600

58 Item-58 INFRAREDLAMP. Rated power: 200 W Angle settings: 5 Switch-off function: yes Timer: No Lifetime of bulb: Max. 4000 hours Replacement bulb (spare part): Yes Medical device: Yes With stand table top. Each 2.00 35799.89 71600

59 Item-59 WAXBATH. SPECIFICATIONS: Construction: Double walled effectively insulated. Wax tank of 20 gauge Stainless steel sheet. Fitted with laminated wooden rim & anodized Aluminium cover Mounted on 5cm dia. Four casters. Heaters: Two, 1kw each, special wax Heaters. Heat Control: Thermostat to control temperature from 30 to 110 deg.Cen. Finish: Externally finished in Oven Baked.Accessories: 6 Kg. Paraffin Wax, Power Plug, One brush for wax application & aluminium sheet mesh for heaters. Each 1.00 34422.96 34423

60 Item-60 EMERGENCY RESUSCITATION KIT-ADULT. 1. To have Retro molar Intubation fiberscope for unexpected difficult airways. a. Tip Distal Bending 40°. b. To be movable eyepiece c. To have a light source connection d. With length 40-42cms and dia 5-6 cms. e. ET tube holder should be provided f. Should take min. 5.5 size of ET tube 2. Portable LED light source should be provided i. with illumination not less than 50000 Lux ii. should run on two 3v photo batteries iii. burning life should be more than 100 minutes iv. ergonomically designed and can be connected to both the fibrescopes v. life of LED should be close to 50000 hrs 3. One Laryngoscope with rechargeable battery pack and blade with fibreoptic mechanism should be provided to be used on both adult and pediatric patients with charger. 4. Other accessories like, magill forceps should be provided. 5. Should have Emergency Cricothyroidotomy for pediatric and adult i. disposable blades ii. dialator 6. Should have Combitube size 37Fr. i. with complete kit 7. Should have Intubating Laryngeal Mask Airways with Following Components: a. ILMA Sizes 3 & 4. b. ILMA Tubes ID 7mm & 7.5mm. c. Tube Stabilizing rod d. Cuff deflator 8. Should have Laryngeal Mask Airways i. sizes 1,2 and 4 9. Handy and strong brief case/bag should be provided to keep all the instruments safe. 10. Set of disposable percutaneous tracheotomy kit for adult and pediatric. 11. Should have standard AMBU bag for pediatric and adult. 12. Mechanical suction pump with suction catheter and stomach tubes. 13. Should have Aluminum Oxygen reservoir 2 Liter with oxygen tube and cather. 14. Oxygen pressure reducer, regulable 0-15 liter with coupler for respirator. 15. Ventilating bag 16. Lubricant Each 2.00 34306.27 68613

61 Item-61 ENEMA SET. Enema can stainless steels with Disposable Enema Nozzle. Each 6.00 4410.82 26465

62 Item-62 BED SIDE SCREEN (SS MODEL). Three Fold Screen with Curtain Cloth – Overall Size: 1680mm L x 2450 mm W. Tubular frame work made from 25.4mm dia x 1.2mm ERW tube. Base tubular made from dia 25.4mm x1.2mm tube. Fitted with 50mm dia non-rusting castor. Middle frame 1220mm side frame 610mm each frame with four hooks. All MS parts are 8 tank Pretreated & powder coated. Mounted on 6nos 2” Nylon castor wheels All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2008 Each 20.00 19965.33 399307

63 Item-63 WHEEL CHAIRS. Overall OverallApproxDimensions : 670 mm W x 1120 mm D x 920mm H ,Fully MS Steel tubular frame made of work with Seat and Back Cushion ,Adjustable Aluminum Foot Rests, Two Solid Rubber Tired Bicycle Wheels with Break and Self Propelling Stainless Steel Hoops , Two Swivel Castors,200 mm dia ,in front and with safety Belts. Each 10.00 41045.00 410450

64 Item-64 55" INCH ANDROID TV. 4K 55" inch TV with 20W speaker, HDMI, Power Cord. Each 1.00 123926.35 123926

65 Item-65 3rd Charges at 1% Each 1.00 194456.00 194456

66 Item-66 Miscellaneous and rounding off Each 1.00 7401.62 7402

Estimate for Blood Testing and Office Stationary Equipments for Kampli New 100 Beds Taluka Hospital, Under 2515 KKRDB Macro for the year 2024-25. (PWD/2025-26/IND0205)

SL. No. Item Code Item Name Unit Scheduled Quantity Unit Price Rs. Amount Rs.

1 Item-1 ESSENTIAL LINEN AND BEDDINGS(MATTRESS) ITEMS FOR. 1 Patient Bed Sheet 150cm X 270cm. Fabric- Cotton, Bedsheets Design & Color as per hospital need (Violet) - 1 (nos.) 2 Patient Bed Sheet 150cm X 270cm. Fabric- Cotton, Bedsheets Design & Color as per per hospital need " (Indigo) 1 (nos.) 3 Patient Bed Sheet Bedsheets Design & Color as per per hospital need 150cm X 270cm. Fabric- Cotton, blue- 1 (nos.) 4 Patient Bed Sheet Bedsheets Design & Color as per per hospital need (Green) 150cm X 270cm. Fabric- Cotton, 1 (nos.) 5 Patient Bed Sheet 150cm X 270cm. Fabric- Cotton, Bedsheets Design & Color as per per hospital need (Yellow) 1 (nos.) 6 Patient Bed Sheet Bedsheets Design & Color as per per hospital need (Orange) 150cm X 270cm. Fabric- Cotton, 1 (nos.) 7 Patient Bed Sheet 150cm X 270cm. Fabric- Cotton, Bedsheets Design & Color as per per hospital need (Red) with pillow cover Each 166.00 14070.00 2335620

2 Item-2 LCD PROJECTORS WITH LAPTOP. SPECIFICATIONCE Marked, Power Supply : 220-240 V AC, 50/60 Hz, Transparent LCD Panel display system, Minimum 5200 hours lamp life, Min. 5800 Lumens brightness, contrast ration 10000 : 1, aspect ratio 16 : 10, resolution XGA (1024 x 786) with HDMI and VGA in, LAN & USB Support, wireless Support, Light Weight, Remote Control etc. Each 2.00 416486.40 832973

3 Item-3 ALL IN ONE COMPUTER. Processor Hexacore Processor having 2.0 Ghz clock frequency and 8MB cache or higher, of either Intel Core i5 11th Generation or Higher or AMD Ryzen 5 5000 Series or better 2. Chipset Compatible Chipset 3. Motherboard OEM Motherboard with TPM 2.0 or higher 4. Display 23.5” FHD (1920x1080), Antiglare Display or higher 5. RAM 16 GB DDR4 or higher expandable up to 32 GB 6. Hard Drive 512 GB SSD or higher(with Virtual partition of 1X256GB and 1X256GB) 7. Audio Integrated HD Audio with Stereo Speakers 8. Connectivity Wireless LAN 802.11 ac with Bluetooth 5.0 or higher 9. Network Interface Integrated Gigabit Ethernet (10/100/1000 Mbps) 10. Graphics controller Integrated Intel HD Graphics 11. Keyboard & Mouse USB Keyboard and Mouse same make as PC 12. Interfaces 4 USB ports or higher (minimum 2 USB 3.0/3.1), 1 Ethernet (RJ-45), 1 HDMI/DP Port, headphone/microphone combo jack 13. Webcam & Fingerprint Integrated HD Webcam, Integrated Fingerprint Reader (Optional) 14. Security Features Power-on password, Hard Disk Password, Supervisor Password 15. Operating Preloaded Microsoft Windows 10 Pro 64 Bit (Should have a free upgrade option to Windows 11 pro, at a later date of our convenience/application compliance) 16. Certifications Windows 11 FCC, Energy Star, BIS 17. For OEM: ISO 9001, ISO 14001 or latest 18. Accessories With required accessories, connecting cables and AC Adaptor should be supplied 19. Antivirus Pre-Loaded with Latest version of Antivirus Symantec/ MacAfee/ eTrust/ Kaspersky/ eScan/Trend Micro and Microsoft Defender with Years License 20. Warranty 3 Years onsite comprehensive warranty. Each 3.00 185354.40 556063

4 Item-4 COLOR PRINTER. Type of machine Multifunction A4 colour Ink tank printer 2 Printing technology Inkjet 3 Type of print Colour & Monochrome 4 Facility Print, Copy & Scan 5 Network connectivity USB, WIFI 6 Paper size (Printing) A4 7 Paper size (Scanning) A4 8 Print speed colour (Min) 5 PPM 9 Print speed Monochrome (Min) 11 PPM 10 Cartridge/ink type Refillable Ink tank 11 Make HP / EPSON / CANON only 12 Warranty Manufacturer warranty shall provide for Minimum One yearfor the equipment from the date of supply. Each 3.00 119156.40 357469

5 Item-5 LASER PRINTER. Laser 25 ppm (A4) or higher 400 MHz or more 128 MB or more Min. 600 dpi X 600dpi 80000 pages or higher A4, Legal, Customized, etc High Speed USB 2.0 or higher, Ethernet (LAN) port with 100 Mbps Automatic WIndows®10 (64-bit) or higher For Windows (64 bit) (Driver to be supplied) The first toner supplied along with the printer should be a full toner. 3 Years warranty (comprehensive onsite for all spare parts except toner). Each 3.00 84733.44 254200

6 Item-6 XEROX MACHINE. Warm up time About 30 sec 2 Paper Capacity 250 Sheets x 2 Trays; minimum 50-Sheet Bypass Tray 3 Feeder Automatic Document Feeder / RADF 4 Counter 6 Digit digital 5 Power AC 230 +/-10%Volts, 50 Hz 6 Toner Capacity 8,000-15000 approx. 7 Copier Type Digital 8 Minimum number of copies taken per month More than 15,000 9 Copy paper size A3 to A6 10 Continuous Copy Speed (A4/Letter) 999 11 Sorter of finisher Electronic sorting 12 Zoom 25% to 400%in 1% Step 13 Copying resolution 600 X 600 dpi 14 Copy mode Text, Text/photo, Photo, Color Document 15 Out put Duplex 16 Duplex Printing Automatic / Manual 17 Printing speed 35 (pages per minute) 18 First copy out time Approx. 3-5 seconds 19 Original Size Maximum A3 20 Print resolution Up to 1200X1200 dpi 21 Print Cartridge Black 22 Print Technology Monochrome. Each 2.00 595782.00 1191564

7 Item-7 PUBLIC ADDRESS SYSTEM. Autometic Bell-Ring, Digital Brodcasting System Each 1.00 52958.40 52958

8 Item-8 AMPLIFIER WITH SPEAKERS. Amplifier with Speakers with Builtin Bluettoth for audio Streaming, Two Ton Chime Generation for input. Each 2.00 79437.60 158875

9 Item-9 UPS OFFLINE 5KVA. 5 KVA , 5000w, Phase: Single, Battery: 4 nos Each 1.00 423667.20 423667

10 Item-10 REFRIGERATOR 200 LITRES. Minimum Gross storage Capacity :180 to 200 ltrs 2.Model Type :Double door 3.Voltage Range at 40degree centigrade Capable of working on 220 volts + 12 % A.C 50 Hz 4 .Power Source AC , 220 Volts to , 50 Hz 5.Method of Defrosting: Frost Free 6.Insulation : Puff / Maxi 2 / Polyurethane 7. Refrigerant Gas: CFC free 8.Compressor :Power saver compressor 9.Accessories Required : Adjustable shelves , chiller Tray , Temperature controller, Auto lamp On/off feature , should be supplied with all standard accessories as per manufacturer catalogue for the model supplied 10. Warranty with 3 year Comprehensive Warranty 11. Stabilizer Should be supplied with 0.5 KVA capacities CVT without any extra cost. The CVT will also carry 3 years warranty. 12 Colours: Steel grey with metallic finish ( MetallicColor) Each 4.00 66198.00 264792

11 Item-11 AIRCONDITIONERS. 2 TON SPLIT A/C (5 STAR Rated) FITTED WITH ROTARY COMPRESSOR, WITH STABILIZER Cooling Capacity Nominal (Kcal/hr) 5800 Cooling Cap (min)Guaranteed (Kcal/hr) 5500 Min.Room Discharge AIR flow (Cub.m/hr) 8100 EER ( w/w) 2.7 Min Star Rating 5Star Power V/Hx/Ph 220-240V / 50Hz 1Ph Ton 2 Capacity (BTU/hr) Refrigerant R410a Air Flow Volume (m3/h) 1100 Power Consumption 2340 W Operation Current 10.8 A Capacity 24000 BTU Noise Level (Indoor) should be better than High 48 dB (A), Mid 45 dB (A) And for Low 42 dB (A), Outdoor 59 dB (A) Compressor should be High quality famous brand rotary type compressor Elegant panel design, with LED/LCD central Display Galvanized outdoor unit or plastic outdoor unit for anti-corrosion. Supplied with remote control . Flat panel for easy cleaning, washable plastic filter and horizontal auto louver Should be supplied with stabilizer SPECIFICATION FOR 5 KVA STABILIZER : Wall mounting cabinet : Warranty : 3 YEARS Capacity : 5KVA Input Voltage : 170 V - 270V Output Voltage : 200V –240V OUTPUT High Voltage cut off : 240 V Efficiency : >95% Frequency : 50 Hz Calibration Accuracy : ± 2.5 Each 4.00 129254.10 517016

12 Item-12 SPARE ICE PACK BOX. 1.storage Capacity: 10-15 litres 2. Cold life Type: Long range 3. 4. Weight (with empty ice pack): should light weight 5. External surface and internal lining material: LLDPE (Linear Low Density Polyethylene) 6. Insulation material: CFC-free Polyurethane (PUF) 8. Cold life without opening: minimum 96 hrs at +43 degrees Celsius 9. Casing material: Internal and external casing materials must resist UV degradation and all joints between the moulded components must be water and vapour proof, must be easy to clean and must be selected with environmentally safe end-of-life disposal in mind. Chlorinated plastics and composites containing epoxy resins are not permitted. All metallic components and their fixings must be constructed in stainless steel or a suitable non-ferrous metal. 10. Chemical resistance: The external and internal surfaces of the container must be resistant to chemicals used for disinfecting (e.g. sodium hypochlorate, 5.25% in water). 11. Phase change material (PCM) filled cassettes of ice pack should be provided with Cold Box. 12. The cold box should be provided with handle or carrying belt for people 13. Should have removable lid to give full access to the interior of the cold box. The lid must be fitted with a captive labyrinth seal which engages with the container walls when the lid is closed so as to minimize cold bridging and maximize structural strength. Each 7.00 6619.80 46339

13 Item-13 WASTE DISPOSAL TWIN BUCKET, HYPOCHLORITE SOLUTION / BLEACH. Capacity – 20 Liters SPECIFICATIONS:- Made from high grade propylene material Easy operational foot operated broad pedal with minimum noise Rectangular front & without wheels Colour red, black and yellow with good quality ss frame. With biohazard symbol and hospital name inscribed on bin It should be easy to assemble. At least one year warranty on bins and frames. Each 1.00 119156.40 119156

14 Item-14 COOLERS. Plastic body (Heavy Sheet) double blower room cooler with motor blower. Each 10.00 33099.00 330990

15 Item-15 ESSENTIAL ORTHO OT INSTRUMENTS SET. Universal Chuck with T-Handle Bone Holding Self Cenetringforcep(Small/Medium/Large)-2pair each Patella forcep w/ serrated jaw(Small/Medium/Large)-2pairs each Periarticular Reduction forcep w/ball tips(medium/large) Humeral Head Retractor Reduc-Forceps w/Points narrow ratchet-lock Reduc-Forceps w/Points wide ratchet-lock Reduc-Forceps w/Points ratchet-lock L180 Reduc-Forceps toothed speed-lock L170 Reduc-Forceps w/Points speed-lock L130 Reduct-Forceps-large w/Points speed-lock Reduc-Forceps toothed speed-lock L140 Reduc-Forceps w/Points ratchet-lock L160 Reduc-Forceps w/Points ratchet-lock L130 Reduct-Forceps-large w/Points ratchet-lock Reduc-Forceps toothed ratchet-lock L140 Bone Holding Forceps self-center speed-l Bone Holding Forceps self-center speed-l Bone Holding Forceps self-center speed-l Bone Holding Forceps f/Tib-Edge Fragm L210 Bone Holding Forceps w/Ball ratchet-lock L180 Reduction Forceps, toothed, speed lock, length 240 mm Bone Hook sharp small L230 Bone Hook sharp medium L230 Bone-Lever short narrow tip w/8 L220 Bone-Lever short narrow tip w/18 L235 Bone-Lever w/long wide tip w/24 L270 Periost-Elevcurv-shaft round edge w/14 Periost-Elev slightly curve-blade round e Periost-Elev straight shaft round edge w Hammer 500g Chisel-Handle Chisel Blade w/10 Each 2.00 581644.80 1163290

16 Item-16 MAXILLAA ORTHAPEDIC DRILL. Manman Drill. Should be CE/ FDA approved. Manufacturer should have ISO 13485 certification. Driving Unit: Motor with MCB (90 watt)  Foot control  Flexible Shaft  Stand & Base  Tool Kit  Special Container 2. Canulated Drill Handpiece: a) PISTOL GRIP. b) SS Jacob‟s Drill Chuck (0-6mm). c) Weight – 800 gm approx. d) Speed 1200 RPM on load e) 5.5mm cannulation f) Ideal for drilling g) Autoclavable h) Compatible to Driving Unit only. 3 . Reverse-Forward Hand piece: a) Pistol Grip. b) Trigger For Forward & Reverse Changing. c) Stainless Steel Jacob‟s Drill Chuck (0- 1/4”) d) Weight 800 Kg Approx. e) Ergonomically Designed Grip f) Maximum Speed 800 Rpm g) 5.5mm Cannulation h) Autoclavable i) Compatible To Driving Unit 4 .Resiprocating Saw Hand Pieces: a) Pistol Grip b) To take difficult cuts at depth c) Ideal for TKR, THR d) Two types of blades e) Reciprocations 13,000/ CPM f) Weight - 650gms approx Each 1.00 329868.00 329868

17 Item-17 BATTERY OPERATED DRILLS. Should be CE/ FDA approved. Manufacturer should have ISO 13485 certification. 1. The Battery operated Handpiece (Power Instrument): 2no. for all types oforthopedics procedures. a) The system that facilitates quick change mechanisms for all attachments and Eightposition selection head. b) Single handed instant Forward and Reverse mode. c) Weight with batteries 1000gms to 1600gms d) Should deliver maximum torque of 10-17Nm e) The system is fully washable with wet cloth. Direct entry of water is not expected.Autoclavable with steam up to 2 Bar and 134ºC Temp for 20 minutes time duration. f) Should be ETO sterilized 2. Drilling Attachment a) Speed 0 to 1200 RPM approx. b) Cannulation 4-5mm c) Can work in Reverse – Forward direction d) Jacob‟s chuck with key (stainless steel) 0 to ¼ inch (0-6.35mm) e) Autoclavable 3. Reaming Attachment: 1no. a) Speed 0 to 400 RPM approx. b) Cannulation 4-5mm c) A/O adaptor d) AO Adaptor w. This is suitable for all Flexible & rigid type of reamers with A / O end. e) Other Type od adaptors such as Hudson, Synthes, Zimmer etc. are available againstrequest only ( to suit A/O end ) f) Autoclavable 4. Sagittal Saw Dedicated Handpiece: 1no. a) Oscillation from „0 to 12,000” cycles per minute (CPM) b) Cutting arc 4.5° c) Blades: set of standard 3 blades and 2 special blades for TKR or THR d) Autoclavable e) Attachment can be set into 8 different positions on the axis. f) By default, button press blade holding attachment is provided. 5. Reciprocating Saw Dedicated Handpiece: 1no. a) Continuous reciprocations. Each 1.00 188496.00 188496

18 Item-18 DIGITAL TOURNIQUET. Description of Function: 1.An automatic tourniquet system comprises variable pressure cuff apparatus forapplying a variable pressure to a limb or artery of a patient in order to occlude bloodflow to the limb for doing a bloodless and clean surgery. The control apparatus fordetermining the operative pressure for a patient and a variable pressure cuff apparatusfor minimum effective pressure and time required for complete blood flow occlusion. Should be an automatic tourniquet. Should have facility to use single and dual cuff tourniquet. Should not require any external high pressure air. Should have continuous and bright display for actual cuff pressure, set pressure and time. It should have colour touch screen display of 8” minimum. The cuff pressure should not be released on power failure Should be possible to increase and decrease the set cuff pressure online Should have facility to release cuff pressure without disconnecting the cuffs from the machine Should have a cuff pressure from 10 to 400 mmHg Should have a timer setting from 10 minute to 3 hours. Should have audible and visual alarm for pressure increase and decrease from the set value. Should have audible and visual alarm for reaching the set time Should be supplied with two sets of good quality cuffs (Upperlimb-2, Lower limb-2) for paediatric and adult size Unit should function with 200-240Vac, 50/60 Hz input power supply. Quality and standard The model should be CE(notified) / FDA approved The manufacturer should be ISO 13485 certified The model should have electrical safety compliance to IEC 60601-1Standards, Safety and Training for Automatic Tourniquet System:- 1. Should have a European CE or FDA approved certification. 2. May preferably be compliant with IEC 61010 -1 / or any international equivalent viz. EN/UL 61010 covering safety requirements for electrical equipment for measurement control andlaboratory use. 3. The unit shall be capable of being stored continuously in ambient temperature of 0-50deg Cand relative humidity of 15 - 90% 4. The unit shall be capable of operating in ambient temperature of 20-30 deg C and relativehumidity of less than 70%. Each 1.00 176715.00 176715

19 Item-19 ELECTRO CAUTRY. The system should provide both monopolar and bipolar current option and clear digital display of power selected with power adjustment knobs The system should provide high patient safety from burns caused on the patient’s skin due to leakage in the electric current. The power should not be delivered when there is a leak in the circuit The system should have start-up functional if any error the system should not deliver power. The system should have the following modes 1.Monopolar pure cutting 2.Monopolar blend cutting 3.Monopolar super blend cutting 4.Endo mode- time controlled cutting mode 5.Monopolar contact cogulation 6.Monopolar forced prep coagulation 7.Monopolar spray cogulation 8.Bi polar cogulation The system should incorporate a connector which can allows connection of monopolar hand switches and bipolar electrode socket equipped with any of the international accessories The system should have the option of operating monopolar cutting and coagulation by using both hand and foot switch The system should have the option of using bipolar coagulation with automatic function The system should have the option of connecting argon beamer system at a later stage. The system should be supplied with standard accessories for both monopolar and bipolar System should be Class of protection I Clasified acc. To mddii b defibrillator proof protected. Should have Nominal frequency at least 450 khz and Pulse frequency at least 30 khz with Hf output power. CE marking conforms to 93/42/EEC Power Max.400W at 300 Ohm and min. 100W at 100 Ohm Should offer the following accessories Footswitch double pedal Patient plate reusable oBipolar forceps straight blunt nonstick type-3 no oBipolar cable -3 no Monopolar diathermy accessories for open surgery. Each 2.00 500692.50 1001385

20 Item-20 MINOR OT INSTRUMENTS SET. 1.NEEDLE HOLDER 6" -1 2.CROCODILE FORCEPS 6” -1 3.SUTURE CUTTING SCISSOR 6" -1 4.EAR SUCTION CANNULA SET OF 5 and Size-12, Size-14 Size-16, Size-18, Size-20-1 5.JOBSONS PROBE double ended, probe on one side, ring curette on other side-1 6. NASAL SUCTION CANNULA (set of 4), Straight , different sizes (set of 3) -1 7. MOSQUITO FORCEPS 5” MOSQUITO FORCEP CURVED 5"-1 8. STAINLESS STEEL –ALLIES FORCEPS 6" -1 9. TRACHEAL DILATORS Child, 12 CM/4.75-1 10. METZANBAUM SCISSORS 6"-1 11. KILLIAN NASAL SPECULUM SET OF 3-1 12. JANSEN BONE NIBBLER 7" S/A-1 13. KERRISON BONE FORCEPS S.S 7"-1 14. SEPTAL FORCEPS6”-1 15. FORCEPS SCISSORS-1 16. OSTEOTOME GILLIES PERIOSTEAL ELEVATOR 17. SWIVEL KNIFE-1 18. NASAL CHISEL STAINLESS STEEL –1 Each 1.00 265072.50 265073

21 Item-21 MINOR OT INSTRUMENTS SET. 1.NEEDLE HOLDER 6" -1 2.CROCODILE FORCEPS 6” -1 3.SUTURE CUTTING SCISSOR 6" -1 4.EAR SUCTION CANNULA SET OF 5 and Size-12, Size-14 Size-16, Size-18, Size-20-1 5.JOBSONS PROBE double ended, probe on one side, ring curette on other side-1 6. NASAL SUCTION CANNULA (set of 4), Straight , different sizes (set of 3) -1 7. MOSQUITO FORCEPS 5” MOSQUITO FORCEP CURVED 5"-1 8. STAINLESS STEEL –ALLIES FORCEPS 6" -1 9. TRACHEAL DILATORS Child, 12 CM/4.75-1 10. METZANBAUM SCISSORS 6"-1 11. KILLIAN NASAL SPECULUM SET OF 3-1 12. JANSEN BONE NIBBLER 7" S/A-1 13. KERRISON BONE FORCEPS S.S 7"-1 14. SEPTAL FORCEPS6”-1 15. FORCEPS SCISSORS-1 16. OSTEOTOME GILLIES PERIOSTEAL ELEVATOR 17. SWIVEL KNIFE-1 18. NASAL CHISEL STAINLESS STEEL –1 Each 1.00 530145.00 530145

22 Item-22 RO PLANT. RO Plant. OPERATING SPESIFICATIONS: Flow: 1000 LPH Average flow : 1000 LPH Inlet TDS : 500-2000 (Max) mg/l Permeat TDS : 20% SYSTEM SPECIFICATIONS: Water intake – Brackish water Operating system: Semiautomatic Particulate Filter : 10 Micron, 4”x20” Activated Carbon Block : 4”x20” Antiscalant Dosing System Antiscalant Dosing Tank Capacity: 40-50 ltr. Antiscalant Dosing Tank – PVC/HDPE/SS Dosing pump specification : Single phase 230 V, 3 LPH Micron Cartridge Filter (PP): 5 Micron, 10” Long High Pressure Pump (HPP) : 1000 LPH, 1.1 kw RO Membrane 4” x 40” RO Membrane Make: Filmtec, Torey, CSM, GE,Hydranautics RO Membrane washing : Manual UV suitable for 1000 LPH Plant Dimensions : Length (mm) 500-700 Width (mm) 700-900 Height (mm) 1400-1700 Weight (approximately) : 150-250 kg Power supply : 415 V AC, 3phase, 4 wire, 50Hz Display panel with flow meter, pressure gauge, TDS, Digital/Analog Type of pipe fitting : CPVC (Finolex/Astral)/GI (Make: Eureka Forbs/Kent/Ion Exchange/Delta Ion Exchange/Thermax/ Hi-tech.) Each 1.00 660920.83 660921

23 Item-23 URINE AUTOANALYZER. 1. The analyser should be compact benchtop, fully automated integrated urine analyzer, integrating urine chemistry and urine sediment analysis. 2. Chemistry parameters required to be provided should be glucose, protein, blood, bilirubin, urobilinogen, ph, ketones, nitrate, leuokocyte, creatinine & albumin. 3. Additional instrument parameters should have specific gravity, turbidity & colour. 4. The analyser should be based on fluorescence flowcytometry/ Digital flowcytometry for accurate measurement of urine parameters such as rbc, wbc, epithelial cells, cast and bacteria. 5. The instrument should provide scattergrams and histograms or actual images for easy interpretation. 6. The analyser should provide additional rbc information, uti information and conductivity. 7. The analyser should have user friendly software with cross check function. 8. The analyser should have a throughput 100 samples / hour (chemistry) & 50 samples / hour (sediment analysis). 9. The equipment should have a storage of 200 test strips at a time with continuous loading for true walkaway analysis. 10. The equipment should be capable of analysis in both manual and sampler mode. 11. Sampler should have the capacity of 60 sample tubes and internal barcode for sample identification 12. Controls should be available for both chemistry and sediment analysis. Each 1.00 188496.00 188496

24 Item-24 SEMI AUTO ANALYZER. 1.It should be microprocessor controlled, programmable, semi auto analyzer to perform routine biochemistry tests (with 10 modes including 1-point Linear (End – point), 2- point Linear (Fixed Time), Rate A Linear (Kinetic), 1-point Non-linear (End-Point), 2-Point Non-Linear (Fixed Time), Rate A non-linear (differential), Absorbance, (Coagulation), enzyme immunoassays (with multi standard curve 1 blank &amp; six standards calibration &amp; memorization) etc. All modes can work with monochromatic as well as bi-chromatic filter selections. 2. It should offer a minimum of 200 user definable chemistry parameters 3 Instrument should have keys to access 56 Chemistry directly. 4. It should have a peltier controlled reading block and below 20ul flow cell with temperature programmable for off 25,30 &amp; 37 C 5. Flow cell with peristaltic pump should be part of the main unit. 6.It should have facility to use both 6mm glass cuvettes and 10mm plastic cuvettes additionally. 7. It should have minimum 8 narrow band static interference filter (not filter wheel) with wave length selectable from 340 – 700nm. 8. It should have a large 8 lines LCD display alphanumeric display and built-in full graphic printer for printing reaction curves and test results. 9 It should require minimum reagent per test typically not more that 500 ul/test. 10.It should have the facility to display the actual temperature on screen 11. The software should be user friendly and guide the programmer step with special HELP &amp; CALIB key. 12. The instrument should also be capable of doing coagulating assays with programmable ISI value &amp; INR can be printed. 13. The manufacturer / supplier should have a full – fledged service force and installation base for the quoted equipment. 14.The manufacturer should be able to supply kits locally against orders. 15 It should have facility to store minimum 1000 results in the memory and it should be able to give Patient wise, Date wise as well as Date – Patient wise report printout. Each 1.00 188496.00 188496

25 Item-25 MICRO PIPETTES OF DIFFERENT VOLUME RANGE. Micro pipettes of different volume range Volume Range: 0.5-2.5Mic l Volume range: 2-20Mic l Volume range: 10-200mi Volume Range: 100-1000 mi Should be made of mechanically robust and chemically resistant materials Must be a durable and stable pipette providing consisting performance for long time. Should be a light weight pipette enabling smooth single handed pipetting to improve efficiency Must be fully autoclavable Should be designed to dispense accurate volume of liquid with long term precision. Should be ergonomically designed for ease in operation and user tested. The micropipette should possess a separate tip ejection button, a volume changing knob. There should be No metal parts to rust or corrode. Each 5.00 5301.45 26507

26 Item-26 WATERBATH. Volume Range: 0.5-2.5Mic l Volume range: 2-20Mic l Volume range: 10-200mi Volume Range: 100-1000 mi Should be made of mechanically robust and chemically resistant materials Must be a durable and stable pipette providing consisting performance for long time. Should be a light weight pipette enabling smooth single handed pipetting to improve efficiency Must be fully autoclavable Should be designed to dispense accurate volume of liquid with long term precision. Should be ergonomically designed for ease in operation and user tested. The micropipette should possess a separate tip ejection button, a volume changing knob. There should be No metal parts to rust or corrode. Each 1.00 11915.64 11916

27 Item-27 HOT AIROVEN. Required heating oven for drying of medical & laboratory material. 2. Should be noise free and should provide soft air convection. 3. CHAMBER CAPACITY: 220 LITRES Minimum 4. MATERIAL OF CONSTRUCTION: Stainless steel AISI 304 grade steel 5. ELECTRIC CONNECTION: 220V, 50HZ 6. TEMPERATURE CONTROL: The temperature should be set between 5degree.c-250 deg. Centigrade 7. CABINET: Cabinet shall be provided with a quick locking facility and heat resistant silicon gasket. 8. BLOWER: An air circulation blower of adequate capacicity. Each 1.00 25155.24 25155

28 Item-28 LAB INCUBATOR. Should be operated on 230V,50Hz single-phase AC supply , and having temperature ranging from ambient to 60ºC 2. Should be double-walled with stainless steel inner chamber having a minimum of two inner stainless steel shelves with holes and powder-coated outer surface. 3. The inner chamber should be fabricated with ribs for adjusting shelves to a convenient height. 4. Should have a minimum of chamber size of (L*B*H) of 450*450*450mm. 5. Should be provided with three side heating elements. 6. Should have air circulating fan (Which can be turned ON/OFF on demand) for uniform temperature on all shelves. 7. Should have a double door with an acrylic transparent door. 8. Should provide a microprocessor-based digital temperature controller with a digital display. 9. Should have synthetic rubber gasket at the door. 10. Should have a safety certificate from a competent authority CE/FDA and CDSCO. Other equivalent certificates will not be accepted. Should have valid detailed electrical and functional safety test report from ERTL. Copy of the certificate/test report shall be produced along with the technical bid 11. Traceable calibration certificate shall be provided. Each 2.00 22383.90 44768

29 Item-29 DISTILLED WATER PLANT. SS304 50Liter full body with shell tube condenser, Pressure, Temp meter, Water Level Indicator, Separator Warranty: One Year. Installation Guidance. Each 1.00 34164.90 34165

30 Item-30 ELECTRI CENTRIFUGETABLETOP. The laboratory centrifuge system should meet the desired specifications as given below The machine should have step less speed regulator with zero start interlock features The machine should have Digital speed indicator along with Dynamic brake It should have 0-99 minutes digital countdown timer Imbalance detector with cut-off is required Safety lid interlock to prevent cover opening during centrifugation Max. Speed: >15000 rpm or better Max. Tube size: 100ml Angle Rotor Head having capacity of (8 x 100 ml) should be included Polypropylene tubeswith caps (50 Nos or more in each size i.e., 100ml, 50 ml) should be provided Power Supply: 220-240V, 50 Hz, Single phase The centrifuge should have at least ISO 9001:2008, ISO13485:2012, CE, WHO:GMP Certifications The centrifuge along with major accessories should have a minimum of 3 year warranty from the date of installation Hard copy of the Operation manual should be included. Each 4.00 21205.80 84823

31 Item-31 CBC CELL COUNTER ELECTRONIC. . PARAMETER a) WHOLE BLOOD MODE : WBC, RBC, HGB,HCT, MCV, MCH,MCHC, PLT, LYM%,MXD% NEUT%, LYM#, MXD#, NEUT#, RDW HCV/SD, PDW, MPV, PLCR and Histograms for EBC, RBC and PLT b) PrediluteMode : WBC, RBC, HGB, HCT, MCV, MCH, MCHC, PLT 2. THROUGHPUT : More than 55 samples per hour 3. SAMPLE VOLUME : Max 55 microliter for whole blood mode Max 25 microliter for predilute mode 4. DATA STORAGE : Minimum 235 results without Histograms 5. DISPLAY : Large LCD Screen with Back Lit display with facility for Histogram display on screen. 6. PRINTER : Built in Thermal Printer 7. PRINCIPLE : a) Cell Counting : Electrical Impedance based b) Haemoglobin: Non Cyanide based Haemoglobin Analysis Method 8. The Equipment should have Sample Rotor Valve (SRV) Technology and Volumetric metering system. 9. Facility for Autoprobe wash 10. Facility fir Autostart up, shut down 11. Facility for standby mode. 12.Floating discriminator for RBC & PLT, Floating discriminator for RBC & PLT, floating discriminator for WBC Tri model population. 13. Pre programmedmaintainance sequence 14. Sample ID No. : Minimum 5 digits 15. Locally manufactured reagents 16. ISO 9002 Company 17. Brand new equipment (No Refurbished) Each 2.00 530145.00 1060290

32 Item-32 ELISAREADER AND WASHER. Table top length: 2000mm • Table top width: 500mm or more • Table top height- minimum 750mm to max 1000mm • Trendelenburg/rev trendelenburg- 25 degree • Lateral tilt – 20 degree • Back section – 70 degree up, 20 degree down • Leg section- down 90 degree • Head section: +45 degree, - 90 degree. • Table should be provided with following attachments: • Orthopaedic Leg Traction Attachment (hanging type) with carbon fiber based bars for excellent Radiolucent properties, with screw controlled foot traction apparatus, Ortho Shoes, radiolucent Perineal Post and Sacral Rest • Hand traction device • Radiolucent hand operating table • Steinmein pin holder • Tibia support • Hip nailing support . • Poplital support Each 1.00 589050.00 589050

33 Item-33 TRACTION TABLE. 1 Should be ergonomically designed and comfortable to the patient. 2 Should allow the patient to test in full sitting and lying position. 3 Should have electronically controlled adjustment for back section, leg section and height. 4 Should have a patient hand set with controls for all positions. 5 Arm set should fold to allow side entry of the patient. 6 Seat cushion should be removable, made of proper density foam and should have smooth surface for easy hygiene and cleaning. 7 Frame should be made up of corrosion free galvanized steel with powder coating and should have four 150mm diaswiveling castor wheels of which the front two should be lockable. 8 Should be able to withstand a maximum load of 150kg. 9Should have facility for online weight measurement (optional). 10 Should have detachable drip stand and a tray table. 11 Power input 220-240 VAC, 50HZ fitted with Indian plug. 12 Should have FDA, CE, UL and BIS approved product. 13Manufacturer/Supplier should have ISO certification. 14 Comprehensive warranty for 2 years and 5 years AMC after warranty supported by principle manufacturers. 15 All electrical actuators and mechanisms should be housed inside the structure making the product safer. Each 1.00 297009.30 297009

34 Item-34 DIALYSIS CHAIR ELECTRIC. 1 Should be ergonomically designed and comfortable to the patient. 2 Should allow the patient to test in full sitting and lying position. 3 Should have electronically controlled adjustment for back section, leg section and height. 4 Should have a patient hand set with controls for all positions. 5 Arm set should fold to allow side entry of the patient. 6 Seat cushion should be removable, made of proper density foam and should have smooth surface for easy hygiene and cleaning. 7 Frame should be made up of corrosion free galvanized steel with powder coating and should have four 150mm diaswiveling castor wheels of which the front two should be lockable. 8 Should be able to withstand a maximum load of 150kg. 9Should have facility for online weight measurement (optional). 10 Should have detachable drip stand and a tray table. 11 Power input 220-240 VAC, 50HZ fitted with Indian plug. 12 Should have FDA, CE, UL and BIS approved product. 13Manufacturer/Supplier should have ISO certification. 14 Comprehensive warranty for 2 years and 5 years AMC after warranty supported by principle manufacturers. 15 All electrical actuators and mechanisms should be housed inside the structure making the product safer. Each 2.00 306306.00 612612

35 Item-35 3rd Charges at 1% Each 1.00 149209.00 149209

36 Item-36 Miscellaneous and rounding off Each 1.00 2428.02 2428

Estimate for Immunization and Dialysis Equipments for Kampli New 100 Beds Taluka Hospital, Under 2515 KKRDB Macro for the year 2024-25. (PWD/2025-26/IND0206)

SL. No. Item Code Item Name Unit Scheduled Quantity Unit Price Rs. Amount Rs.

1 Item-1 ILR & DF WITH STABILIZER. 1. deep freezer with>450 liter capacity, a double outer door and inner doors dividing the freezer into atleast 4 separate areas, with ergonomic handle. 2. Interior walls made up of stainless steel. 3. Temperature: -40°C microprocessor controlled temperaturewith ±3°C uniformity range. 4. Environment friendly: HFC refrigerant (non-CFC, non-HCFC refrigerant). 5. Cascade type cooling system and quietcompressors, noiselevel: 60 <dBa. 6. CPU and touch pad computer control system. 7. LED display linked to computer controlled system. 8. Front access calibration for 7-day temperature recorder. 9. The control panel, alarm system and non-volatile memory. 10. The chamber temperature display during power failure alarm, open door alarm, high/low temperature & clogged condenser filter should be present. 11. Rechargeable battery built in as a backup for alarm systems. 12. After a power outage, operation should resume at pre-outage settings (non-volatile memory for temperature and alarm temperature settings). 13. Intelligent automatic defrost system. 14. Door lock: Key lock. 15. Washable air filter 16. Casters: standard casters. 17. With storage boxes/racks of cryo vials/ ependorf tubes. Each 1.00 635500.80 635501

2 Item-2 COLD BOX FOR PRESERVING DEAD BODIES. Frequency Hz 50Hz Color Silver (Frame) Material SS and Glass Voltage 240 V Height 4 Feet Power Source Electric Length 8 Feet Each 2.00 894996.96 1789994

3 Item-3 BLOOD BANK REFRIGERATOR. Should have a chamber temperature range of 2°C to 6°C 2. Should comply IEC safety/EMI/EMC standards, ISO 9001, ISO 13485 certified and CE marked with class II a. 3. Should have an effective storage volume of 300L(± 20 liters) with a total storage capacity of 150 numbers of 450ml blood bags 4. Should have built in microcontroller based temperature recorder and controller unit (TRCU) positioned at eye level for better visibility and monitoring. 5. Should have six inch, 7day, ink less pressure sensitive circular chart recorder and accuracy should be+/- 1 degree Celsius 6. Should have three pane glass door which insulates the refrigerator from atmospheric temperature and better visibility of blood bags with key lock. 7. Should have an internal evaporator fan for uniform temperature maintenance inside the chamber. It should switch off automatically whenever the door is opened 8. Should have mesh type sliding stainless steel tray which allows bags to be placed upright with sufficient airspace to reduce “Sardine effect” 9. Should have 5 stainless steel slide out trays with a capacity of 20 to 30 nos of 450 ml blood bags per tray 10. Should have separate/ fixed inner acrylic door with magnetic latch ensures minimal loss of cooling 11. Should have hotline around the mouth of cabinet to prevent moisture condensation 12. Should have internal stabilizer which ensures steady supply voltage for the whole blood storage cabinet and prevents voltage fluctuations 13. Should have a factory calibrated encapsulated digital sensor dipped in liquid medium to measure temperature at an accuracy of ±0.5°C 14. Should have flicker free LED lamp for uniform lighting and better visibility of samples inside the cabinet 15. Should include caster wheels as a standard feature Each 1.00 595782.00 595782

4 Item-4 ICE LINE REFRIGERATOR. 1. Ice-lined refrigerators maintain temperatures of +2°C to +8°C. Not more than 8 hrs continuous or intermittent power should be sufficient per 24 hrs. to maintain vaccine temperature below 8 deg. C. 2. Ice-lined refrigerators are required at district and regional levels, since electricity supplies are rarely perfect and standby electricity supplies may not be available. 3. medical essential storage,. 4. Designed for tropical climates. 5. Target holdover time should be 10 hrs or more in a continuous external temperature of 43 deg C. 6. Hot and cold compressor starting at 172 volts (22% below rated voltage). 7. Manufacturing process of the product should not use or produce hazardous chemicals gases. 8. Provision for drainage for the waste water. 9. An additional special ice lining consisting of icepacks covered by strong plastic shell. 10. External: Corrosion Resistance (CR at least 1 mm thickness) 11. Chest type with CFC – free insulation 12. Solid door with lock and handle 13.Type: Compression Cycled, CFC-Free (both for refrigeration and insulation) All system tubing (suction tube, freezer tube and condensing tube) should be of minimum 99.97% of pure copper coil. 14. Temperature of a full vaccines to remain +2 deg C to +8 deg C during continuous availability of energy at ambient temperature +5 to +45 deg. C with intermittent/ continuous electricity supply 8 hrs in a 24 hrs cycle. The temperature difference between any two points in the cabinet should not be more than +2 deg. C once stabilized. 15. Inlet of Capillary should be outside the PUF body. 16. ON/OFF Switch and power indicator should be available 17. Net Vaccine Storage Capacity: Minimum 500 liters within basket in place. 18. A Micro processor based control unit should be provided for setting of temperature and display f of 3 digit digital display (to one decimal point) of cabinet temperature. The sensor should be placed 25 to 50 mm above base of storage chamber. 19. The unit should be sealed/protected from dust, moisture or condensed water falling over it. 20. Accuracy for digital controller +- 0.5 degree centigrade. 21. suitable stabilizer to be provided. Each 1.00 635500.80 635501

5 Item-5 DEEPFREEZER -80 DEGREE. 1. deep freezer with>450 liter capacity, a double outer door and inner doors dividing the freezer into atleast 4 separate areas, with ergonomic handle. 2. Interior walls made up of stainless steel. 3. Temperature: -40°C microprocessor controlled temperaturewith ±3°C uniformity range. 4. Environment friendly: HFC refrigerant (non-CFC, non-HCFC refrigerant). 5. Cascade type cooling system and quietcompressors, noiselevel: 60 <dBa. 6. CPU and touch pad computer control system. 7. LED display linked to computer controlled system. 8. Front access calibration for 7-day temperature recorder. 9. The control panel, alarm system and non-volatile memory. 10. The chamber temperature display during power failure alarm, open door alarm, high/low temperature & clogged condenser filter should be present. 11. Rechargeable battery built in as a backup for alarm systems. 12. After a power outage, operation should resume at pre-outage settings (non-volatile memory for temperature and alarm temperature settings). 13. Intelligent automatic defrost system. 14. Door lock: Key lock. 15. Washable air filter 16. Casters: standard casters. 17. With storage boxes/racks of cryo vials/ ependorf tubes. 18. Internal voltage and power management systems assure component protection and best operation efficiencies. 19. Suitable voltage stabilizer to be provided with the equipment. 20. ISO and CE Certification The same deep freezer can be controlled as ILR work range og 6-8 deg Supplied with suitable stabilizer Each 1.00 1125366.00 1125366

6 Item-6 CENTRAL SUPPLY OF 02, N20, VACUUM.. Central Oxygen system INSTALLATION erection& TESTING Installation of medical gas piping shall be carried out with utmost cleanliness. Only pipes, fittings and valves which have been de-greased and fittings brought in polythene sealed bags shall be used at site. Pipe fixing clamps shall be of nonferrous or no deteriorating plastic suitable for the diameter of the pipe. All joints shall be made of copper to copper and brazed by silver brazing filler material without use of any flux. All brazing shall be done by using a brazing rod CP 104 (5% silver copper phosphorous brazing alloy) and copper-to-brass or gunmetal shall only be joints using brazing rod AG 203 (43% Silver-copper-zinc-brazing alloy) manufactured to EN-1044. Inert gas welding technique should be used by oxygen free Nitrogen gas inside copper pipes while brazing to avoid carbon deposition. 1. OXYGEN SYSTEM Main Oxygen Manifold 10 x 10 cylinders with NRV's, Tail pipes and Middle frame ------SET 1 automatic Oxygen Control Panel (indigenous) with automatic changeover from Running Bank to Reserve Bank of cylinders and having non-halogenated polymer in the high pressure side of the primary regulators and 40 micron inlet filter.---1 No 2. COPPER PIPING AS PER EN 13348 WITH THIRD PARTY - Copper Pipe for Medical use with 15 OD X 1.0 mm --- Approximately 1250 mtrs( original as per measurements) 3. FACTORY DEGREASED ISOLATION VALVES FOR MEDICAL USAGE WITH BRASS ADOPTERS 1. Isolation Valve for 15 mm Copper Pipe i.e (1/2")--- 30 no 4. MEDICAL GAS OUTLETS. DIN type ,Double Lock with probe – Oxygen ---50 No 5. . Oxygen Flowmeter BPC (0- 15 LPM) with Humidifier Set---50 No Bed Headed Panel and Railing.---15 No Double railing Bed head panels Should have bellow Specifications .Accessories 1. IV Stand Extendable type with aluminum slider. 2. Monitor stand wall Panel mounted. 3. Ward vacuum unit slider. 4. Two duplex 230 V, 5/15 Amp. Electrical Sockets Provision Gas/Vacuum outlets as follows. Two oxygen outlet. One Vacuum outlet central vacuum pipe line system Vacuum Supply System: Each 1.00 4956906.24 4956906

7 Item-7 COLD STORAGE FOR MORTUARY 06 BODIES BODIES. Cold storage for mortuary 06 Bodies 1 Supply, Installation ,testing and commissioning of 6 body mortuary cabinet (cascading of 2 X3 body) 2 Should be supplied with three years warranty. 3 2 body mortuary cabinet should be compact and easy to maintain. 4 Temperature Range: 2 to 6 degree Celsius 5 Interior finish should be 0.5 mm SS Sheet 6 Exterior finish should be 0.5 mm SS Sheet or Prepainted GI sheet.The material should be corrosion resistant and rust proof. 7 Insulation should be 0.5 mm polyurethane foam (CFC free) of density 40 kg/m3 and minimum thickness of 2-4 inches. 8. Locking Mechanism: Cam Locks for the door engaging the frame. 9 Lamp: Vapor proof LED lamp. 10 Temperature Indicator cum Controller: Electronic controller with digital display 11 Carriage assembly: Three piece telescopic action 12 Mortuary tray: one piece stainless tray with tubular edge and handles for each body 13 Refrigeration system: Top mounting Unitary type. Refrigerant should be CFC free,enviornment friendly .Each unit should have suitable capacity standby unit. Automatic time cycling between manin unit and standby unit has to be provided by the bidder. 13 Capacity: 10000 (BTU/H) per unit with standby. 14 Thickness of panel not less than 60mm 15. Front door with stainless steel SS 304 Grade 16.One piece stainless steel tray for keeping cadaver 17.Telescope type carrier assembly for cadaver 18 Power Supply: 230 V,50 Hz/ 400 V,50 Hz 3 phase supply 1 Refrigeration unit failure alarm with battery operated remote unit should be supplied. 16 Suitable 440 V,50 Hz electrical supply will be provided by the consignee at the site. All Internal electrical works , plumbing works or any other works required for smooth functioning of the mortuary cabinet has to be provided by the bidder. Each 1.00 6609208.32 6609208

8 Item-8 DIALYSIS MACHINE. 2.1 Technical characteristics (specifictothistypeof device) 1.Thehemodialysismachineshouldhaveabloodpumpto achieve a unidirectional flow up to 400ml/min. 2.Itshouldhaveaheparinpump,arteriallineandvenousline pressure monitors and functional air bubble detector. 3.Mixingproportionofunitwithbicarbonatedialysisfacility 4.Dialysatedeliveryshouldbefrom300to500ml/minormore. 5.Itshouldhaveconductivitymeterandfunctionalbloodleak detector 6.Dialysatetemperatureregulatorwithtemperature of35to39 deg C 7.Built-indeviceformeasurementandmonitorofeffectiveurea clearance (K) and dialysis dose (Kt/V) automatically during treatment. 7.VolumetricUFcontrol 8.Safetydevicesfunctioningalarms,venousbloodcamp 9.Dialysatefilter DesirableFeatures: 1.Onlinebloodvolumemonitor 2.Onlineureaclearance 3.Sodiumprofilingofdialysate 4.Singleneedledialysisfacility 5.Hemodiafiltration 6.Opticaldetector LCD display In-built Capableofoperatingcontinuouslyinambienttemperatureof-10 to 60 deg C and relative humidity of upto 90% in ideal circumstances. Tobespecifiedbymanufacturer. 7.StandardsandSafety 1.ShouldbeCDSCOapproved. 2.ShouldcomplywithBISstandards. Each 1.00 2756754.00 2756754

9 Item-9 ULTRAVIOLETLAMP PHILIPS MODEL 4 FEET. Light source: UV  Wave length: min two 254mm, 366mm  Power source: 12 AC/DC  Chamber: well closed, to hold TLC plates 20 x 20cm & 20 & 10 cm size.Light source: UV  Wave length: min two 254mm, 366mm  Power source: 12 AC/DC  Chamber: well closed, to hold TLC plates 20 x 20cm & 20 & 10 cm size. Each 1.00 7943.76 7944

35 Item-35 3rd Charges at 1% Each 1.00 192639.00 192639

36 Item-36 Miscellaneous and rounding off Each 1.00 16173.72 16174