Renovation Repair of Community Facility Centre Srinagar

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge: All kinds of soil

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed :Ordinary Rock.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil.

Providing & Laying of stone soling (duly hand packed) including watering dressing and ramming with all carriages loading un-loading and stacking etc complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with in 1:4:8 (1 cement:4coarse sand: 8 graded stone aggregate 40 mm nominal size) and curing complete. Mud Mat

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with in 1:2:4 (1 cement: 2coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete.

Cast-in-situ of concrete work of nominal mix concrete M30 (1:0.75:1.5) nominal maximum stone aggregatemm volumetric batching in foundation trenches and ground floor, including curing but excluding formwork costs. Strip Footing And Beams

Cast-in-situ of concrete work of nominal mix concrete M30 (1:0.75:1.5) nominal maximum stone aggregatemm volumetric batching in foundation trenches and ground floor, including curing but excluding formwork costs. Columns and Slab Beams

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement using1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with using 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more including wire mesh wrapping (size 75x75mm with wire dia of 3mm) near Beam column Joints

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc including priming coat with approvedsteel primer,welding as per directions of engineer in-charge all complete Fixed to openings / wooden frames with rawl plugs screws etc

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for Brick masonry with common burnt clay bricks in superstrcture above plinth level upto floor five level

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Plates, including cutting,making holes for bolts,hoisting,fixing in position, applying a priming coat of approved steel primer,Complete job as per Engineer-incharge

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) and curing complete

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.40mm thick with 20mm nominal size stone aggregate.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape from Building Development Centre Srinagar laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)

Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer in-charge (cost of sludge, dump manure or/and good earth to be paid separately)

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 part of stacked volume of earth after reduction by 20% :1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish & surplus earth, if any with all leads & lifts (cost of sludge, manure or extra good earth, if needed, to be paid forseparately) Holes 45 cm dia & 45 cm deep

Providing , stacking and Planting of cedrus deodar of 4 feet height with 2 to 3 branches minimum in earthen pot of required size as per directions of the Engineer In-Charge

Centering and shuttering including strutting, propping etc. and removal of form for:- Foundations, Footings, Base of columns etc for mass concrete

Walls (anythickness)including attached pilasters, buttresses, plinth and string courses etc

Suspended floors, roofs, landings, balconies and access platforms

Columns

Centering and shuttering including strutting, propping etc. and removal of formwork from the site, for all works from foundations, to roof level.(Using steel Plates and Steel Props)

12mm Cement plaster of mix: 1 : 4 (1 cement : 4 fine sand)

Filling available excavated earth in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Dismantling and Re-fixing of KHATAM BANDI ceiling of first class budloo/fir wood including stacking of materials, cleaning and minor repairs. Refixing the same on ceiling with proper alignment using wooden battens, nails/screws and required fixtures. Finishing joints as per original pattern, complete in all respects as per original pattern, complete in all respects as directed by Engineer In Charge

Providing and fixing readymade imported plain panelling including 12mm thick commercial plywood conforming to IS:303, fixed over seasoned wooden framework (as approved), including cutting to size, shaping, and fixing with necessary stainless steel screws, nails, adhesive (Fevicol SH or equivalent), and all required accessories, including polishing with approved melamine/PU polish in desired shade, edge finishing, staging/scaffolding, complete in all respects as per the directions of the Engineer-in-Charge.:For Beams

Providing and fixing readymade imported plain panelling , fixed over seasoned wooden framework (as approved), including cutting to size, shaping, and fixing with necessary stainless steel screws, nails, adhesive (Fevicol SH or equivalent), and all required accessories, including polishing with approved melamine/PU polish in desired shade, edge finishing complete in all respects as per the directions of the Engineer-in-Charge.:For Walls (12mm).

Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss crossing GI wire. With resin bonded fiber glass wool with density 16 kg/cum

Providing and fixing of bolts of different dia's and lengths including nuts,washers and using epoxy grout for fixing of bolts all complete job.Type A- M12x200 Grade 5.8.

Type A- M12x225 Grade 5.8

Type B- M12x200 Grade 5.8

Type B- M12x225 Grade 5.8

Shear connectors M8x150

Shotcreting R.C.C. columns, beams and slabs etc. in layers wit approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer-in- Charge Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument. 50mm thick in Grade M 30 with cement content not less than 330 kg per cum as per Engineer-in-Charge.

Grouting :Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge.(The payment shall be made on the basis of actual weight of approved grout injected. Stirrer mixed Acrylic Polymer of approved make @ 2%of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work

Grouting :Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Epoxy injection grout in concrete/RCC work of approved make

Epoxy Bonding:-Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer In-charge complete in all respect. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make

Finishing walls with textured exterior paint of required shade: Old work (two or more coats on existing cement paint surface applied @ 3.28 ltr/10sqm)

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm

Providing and fixing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/ Fir Wood, complete job in all respects

Providing and Fixing of 50mm dia stainless steel railing of 304 grade of hallow tube 1.6 mm thick of Jindal/Salem make or equivalent including welding and fixing with stainless steel machine screws for making required size and shape, buffing etc. Complete and fixing stainless steel balusters upto 1000 mm height and S S tubes, three in one installed horizontally including cutting, welding, grinding to required shape and size by required steel dash fasteners, nuts, bolts, screws, etc. in floors and treads including providing SS shoe at each balusters complete as per architectural drawings and as per the directions of engineer incharge including cutting of granite/marble floors and fastening with lead grouting if required, complete in all respects

Providing and fixing of stainless steel nevel post (Ornamental) including top ball of AISI 304 grade of required height duly anchored to floor with dash fasteners. Height of the nevel post shall not be less than 1050mm above the finished skirting level all complete as per architectural drawings (including cost of all material, leads, lifts and carriages etc upto site of work complete) Complete in all respects as per directions of Engineer In Charge

Providing and fixing of crib profile/ high rib colour coated CGI sheet roofing ( of reqd. shade) comprising 0.50 mm thick T.C.T Sheet roofing to the supporting structure with incld, chicken mesh and glass wool 50mm thick complete job incluing hings, ridges, valleys & fixed accessories etc..

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of :G.S./CGI Sheet

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter Two or more Coats

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats

Finishing walls with premium acrylic smooth exterior paint of required shade on New Work ( Two or more coats applied @ 1.67 liter/10 sqm over and including priming coat of exterior primer applied @2.20 kg/10sqm)

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 m height, backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1cement: 3 coarse sand) including pointing in white cement mortar 1:2 ( 1 White cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete : (To be secured to the backing by means of cramps which shall be paid for separately):Shimla stone - Exposed face machine cut and table rubbed with rough backing 10-12 mm thick

Repair and repositioning of the existing main gate including ,cutting, lifting to the desired height, welding, strengthening of members, realignment, priming touchups of red oxide and disposal of debris- complete job in all respects as per directions of Engineer-IN-Charge.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) second class kail wood as per directions of Engineer In Charge

Providing and fixing ISI marked flush door shutters conforming to IS: 2202(Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S.pressed butt hinges bright finished of required size with necessary screw 35mm thick

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws First class kail wood thickness of shutters 30mm.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :First class kail wood 30mm

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work

Renewing glass panes, with wooden fillets wherever necessary :Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.

Providing and fixing 100 mm sand cast iron grating for gully trap

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing unplasticised - Rigid PVC PIPES conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap of thermal expansion;with necessary stays / clamps with fasteners having working pressure of 4kg/cm2 of standard make :- all complete including testing of joints and pipes for leakage etc.:- (Including cost / Carriage of material by Mechanical transport); 75mm dia

Providing and fixing unplasticised - Rigid PVC PIPES conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap of thermal expansion;with necessary stays / clamps with fasteners having working pressure of 4kg/cm2 of standard make :- all complete including testing of joints and pipes for leakage etc.:- (Including cost / Carriage of material by Mechanical transport); 100mm dia

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. of make hindware/Cera/Jaquar or equivalent

Providing and fixing (ptmt ) towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer/ wall Mixer pillar tap of approved quality and make, weighing not less than 1.970 kg

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes complete job in all respects

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes 20 mm dia conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.including all fittings Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line with multiple inlets

Providing and fixing aluminum fittings ISI marked anodized (anodic coating) of good or approved quality of required colour and shade with necessary screws etc. complete in all respects. Modular door lock ss finish handle 10" with dual locking system inside and outside (Godrej)

Aldrops 300mm

Tower bolts 100 mm

Handles 100 mm

Tower bolts 150 mm

Handles 125 mm

Butt Hinges of 100x63x3.2mm

Hook and eyes 150mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe of 40 mm dia

Providing and fixing uplasticized PVC connection pipe with brass 45 cm length: 15 mm nominal bore

Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg

Engagement of manual labourers for cleaning bathroom, rooms including disposal of the material, complete job

Cleaning of septic tank and soakage pit, including repairs to plaster,cement concrete , etc and providing new manhole covers,inlet and outlet pipe fittings and all necessary connections, removal of accumulated sludge, scum, and solid waste; dewatering; manual/mechanical extraction; safe disposal to authorized location; cleaning and flushing of internal surfaces with water; and disinfecting the tank and surroundings complete as per safety norms and as directed by the Engineer-in-Charge

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead

Carriage of different material from nearest source to site of work by mechanical transport,:- Stone agg. for an avg lead of 13 km from Athwajan

Sand for an avg lead of 20 km from Ganderbal

Good Earth for avg lead of 15 km

Brick for an avg lead of 19 km from Pampore

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mmFRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required

Wiring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as required. Group-A

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (I) 3*4mm

Supply installation testing and commissioning of BLDC Ceiling Fan 1200 mm 230V 28 W with Speed RPM 350 with miimum Air delivery 220 CMM including wiring the down rods of standard length(Upto 30 cm)with 1.5 sq.mm FR PVC insulated,copper conductor,single core cable including providing and fixing phenolic laminated sheet cover on the Fan Box etc as Required.

Supply,Installation,Testing and Commissioning 320 Cu.m/Hr. AC 220-240 Volts, 50 Hz exhaust fan made out of ABS Plastic Material with inbuilt thermo cutoff Protection and Noise Level not exceeding 37 dB of Following Sizes including connection etc. complete as required .250mm

Supply installation testing and commissioning of 90W, Bracket mounted IP66 Street Light with System efficacy of 110 lm/W, PC lense with Toughened Glass Cover with IK rating IK08. LED Street Light shall be made up of Die cast Aluminium Housing for better heat decapitation. L70 life of 50000 Hrs. P.F.>0.95 with THD<10% ,CCT 5700 K,CRI 70,Surge Protection 4 Kv. Input voltage range of 120V to 300V.Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab.

Providing and fixing Bulk head fitting LED 10 Watts

Supply installation testing and commissioning of IP20 led downlighter 15 W-18 W +/- 1 W LED Surface downlighter round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab

Providing and fixing of Fan dimmers with all necessary fittings, complete job

M/S P.R.COMBINES (BID ID -2542259)

Imtiyaz Enterprises (BID ID -2541585)