Loading
Loading…
Loading…
Tender Value
₹28.5 L
EMD Value
₹57,031
Closing Date
30 Sept 2026, 3:00 pm7d left
DIRECTOR HBCH AND RC MUZAFFARPUR
Director Office HBCH and RC Muzaffarpur
Construction of Parking Shed for Official Vehicles and Other Allied Vehicles at HBCH AND RC Muzaffarpur Bihar 842004
2026_TMC_925590_1
HBCHRC/MZP/W/PT/CP/26-27/08
Open Tender
Miscellaneous Works
Works
HBCH AND RC NUZAFFARPUR
As Per NIT
2 documents required · 2 mandatory
₹0
₹57,031
Yes
HBCH and RC MUZAFFARPUR
10 Sept 2026
10 Sept 2026
1 Oct 2026
10 Sept 2026
30 Sept 2026
19 Sept 2026
12 Sept 2026 - 14 Sept 2026
17 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | 10 | cum | - | - |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
In cement mortar | 10 | cum | - | - |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge.
All kinds of soil | 75 | cum | - | - |
| 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | 7.5 | cum | - | - |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for:
Lintels, beams, plinth beams, girders, bressumers and cantilevers | 30 | sqm | - | - |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more. | 250 | kg | - | - |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources). | 3 | cum | - | - |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade
Two or more coats on new work. | 100 | sqm | - | - |
| 9 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete | 250 | sqm | - | - |
| 10 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | 3,875 | Kg | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.58 MB
NITDOCUMENTS.pdf
Tender Documents • 2.54 MB
TechnicalSpecification.pdf
Additional Documents • 0.80 MB
BOQ_972655.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .