PROVN OF OTM ACCN (KLP) FOR ASC (SUP) AT MILITARY STATION BHOPAL UNDER GE DRONACHAL

GENERAL SUMMARY

Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule ‘A’ Part- I (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part- II (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule ‘A’ Part- III (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part- IV (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for EXTERNAL ELETRIC SUPPLY WORKS as listed in Schedule ‘A’ Part- V (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for ROAD, PATH AND CULVERT WORKS as listed in Schedule ‘A’ Part- VI (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for AREA DRAINAGE WORKS as listed in Schedule ‘A’ Part- VII (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule ‘A’ Part-VIII (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for COMPOUND WALL AND FENCING WORKS as listed in Schedule ‘A’ Part-IX (Ref prepriced schedule attached seperately)

M&L for precast cable route Indicator made out of cement concrete 1:2:4, type B1, using (20mm graded stone aggregate) having 10cm square shape at top and 20cm square shape at bottom and total height of 90cm casted as per direction and grouted into PCC 1:2:4, type B-1, 35cm below ground level as per site requirement including embossed with "LT 440 V Cable" and also painting in synthetic enamel Paint and necessary excavation and earth work in any type of soil complete all as specfied and directed .

Lump sum price worked out by the contractor for RAIN WATER HARVESTING WORKS as listed in Schedule ‘A’ Part-X (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for ARBORICULTURE WORKS as listed in Schedule ‘A’ Part-XI (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for EXCAVATION, EARTH WORK AND SITE DEVELOPMENT WORKS as listed in Schedule ‘A’ Part-XII (Ref prepriced schedule attached seperately)

SCH 'A' Pt - XIII (MISCELLANEOUS ITEMS)

One light point/ fan point/ exhaust fan point controlled by one way 6A modular switch with ISI Marked

One light point controlled by two way 6A modular switch with ISI Marked

One socket outlet 3pin independent controlled by one way 6A modular switch with ISI Marked

One socket outlet 3pin on same board controlled by one way 6A modular switch with ISI Marked

All as per Sl item No. 4.01 above, but with cable 2.5 sqmm for phase and neutral & 2.5 sqmm for earth continuity complete for 6/16 Amps socket point on independent board with ISI Marked complete all as specified and directed

S&F LED tube light fitting batten type, 20 W, 230v , efficacy not less than120 Lumens per watt, colour temprature 6500 K (Cool White), power factor greater than 0.90, polycarbonate body , CRI 80, IP rating IP 20,THDv within 5% and THDi (8-10%) and integrated electronic driver complete with all accessories internally pre-wired and including connecting up with flexible copper conductor cable of suitable size from ceiling rose all with ISI Marked as specified and directed. Notes :- 1.The rate of flexible copper conductor cable of suitable size for connection is included in this item and nothing shall be paid extra on this account. 2. Warranty for replacement of each LED Light fitting shall not be less than 05 years from the date of purchase. 3. Date of Purchase shall be marked on each fixture with permanent marker for redeeming warrenty benefits.

S&F LED lamp 12W, 230V AC, 50 Hz single phase including bakelite button with all fitting fixing accessories with ISI Marked complete all as specified and directed.

S & F surface mounted LED downlighter 15 watt with white powder coated aluminium housing with integrated electronic driver with output short circuit protection, surge protection IP-20, CRI>80, PF>0.90 complete all as specified and directed.

S & F surface mounted LED downlighter 18 watt with white powder coated aluminium housing with integrated electronic driver with output short circuit protection, surge protection IP-20, CRI>80, PF>0.90 complete all as specified and directed.

S & F RJ telephonic socket with shutter, 1 module including cover plate, metal flush box (16 Guage) concealed in wall/roof complete all as specified and directed.

EXTERNAL WATER SUPPLY WORKS NOTE:- For items of EXTERNAL WATER SUPPLY WORKS notes given at the beginning of Sch ‘A’ Part-IV (EXTERNAL WATER SUPPLY WORKS) shall also be applicable.

M&L for cutting upto 150mm cast iron pipes and reducing to required length for making branch connection complete all as specified and directed

Supply, lay, connecting and testing DI Pressure pipes "ISI" marked to IS:8329/2000 (Reaffirmed-2005) Edition 4.1 of dia 100 mm with socket spigot ends suitable for "Push-on joint" in standard working lengths supplied with a rubber gasket duly "ISI" marked for water, class K-9 with socket and with cement mortar lining inside and metallic zinc coating with finishing layer of bituminous paint on outside the pipe without Polyethylene Sleeve but including "Push-on joint" supplied with "ISI" marked EPDM Rubber gasket conforming to IS:5382/1985 (Reaffirmed2003) with dual hardness of Type-2 (bulb) and Type-5 (Heel) quality complete all as specified and directed.

Construction of stone masonry valve pit for Sluice valve all as specified including plastering, PCC in foundation, Excavation and earth work in any type of soil, MS sheet cover 3mm thick sheet with locking arrangement painted with two coat of anti corossive paint over one coats of zinc chrome primer of 1000x1000x1000mm complete all as specified and directed. (Ref Drg No CEBZ/TD/43/2011)

Construction of stone masonry valve pit for Sluice valve all as specified including plastering, PCC in foundation, Excavation and earth work in any type of soil, MS sheet cover 3mm thick sheet with locking arrangement painted with two coat of anti corossive paint over one coats of zinc chrome primer of 450x450x600mm complete all as specified and directed.(Ref Drg No CEBZ/TD/43/2011)

S&F Cast iron air vales with single air outlets ,conforming to IS 14845 of size 50mm dia bore and fixing up in cast iron water supply mains of size 100 mm dia complete all as specified and directed.

INTERNAL ELECTRIFICATION WORKS NOTE:- For items of INTERNAL ELECTRIFICATION notes given at the beginning of Sch ‘A’ Part-III ( INTERNAL ELECTRIFICATION) shall also be applicable.

Supply, install, testing and commissioning floor mounted transformer of capacity 33KV/433V, 100 KVA stepdown outdoor type, 3 phase, 50 Hz, AC, oil immersed, air naturally cooled (ONAN Type), with external cooling tubes / radiators, double wound core type copper wound having no load voltage ratio 33KV/433V corresponding to principal tapping, delta connected primary side (HV side) and star connected on secondary side (LV side) in accordance with vector symbol DYN 11 (vector group 04) with neutral brought out on LV side and having tapping on HV side for constant out put so as to alter / vary secondary voltage +-7.5% in steps of by means of manual off load tap changing arrangements complete and confirming to IS 1180 Part-I 2014,EEL-2.TOTAL LOSSES @ 50% LOAD 613W AND TOT

AL LOAD @ 100% LOAD 1828W complete all as specified. The transformer should be fitted with the following standard fitting and accessories :- (a) Name , Rating and Diagram plate. (b) Earthing terminals - 2 Nos (c) Removable inspection opening on top cover. (d) Air release hole with plug explosion vent. (e) Dehydrating silica gel Breather.

(Contd....) (f) Oil Level Guage. (g) Oil filling hole with plug on conservator. (h) Oil Conservator with drain plug. (j) Jacking legs. (k) Bottom drain cum filter valve. (l) Top filter valve. (m) Pressure release device. (n) Silica Gel breather (o) 4" dial type thermometer stem type (p) Off Circiut tap changer switch (q) HT side open type / LT side cable termination box type. Note: 1. The Transformer shall be complete with standard fittings all as specified conforming to IS: 1180 (part-I) 2014 and manufacturer shall hold licence / certificate from BIS to this effect. 2:- The Transformer will have its initial oil filling to appropriate level ( Cost of oil including testing with desired dielectric strength is included )

S&F vertical type air break switch, gang operated, tripple pole, mechanically operated, outdoor type, with all fittings and accessories, mounted on and including HT 33 KV porcelain insulators 12 Nos and steel channel frame, GI Operating rod 25 mm dia of suitable length to worked from ground, including locking arrangements and with 7 lever brass lock, suitable for 400 Amps current rating etc complete all as specified and directed.

S&F drop out fuse unit, explusion type for out door air break gang oprated switch, single pole mounted on and including insulators and jumpers for 33 KV working pressure fixed to and including MS channel with nuts, bolts and washer etc, synthetic bounded fuse tube complete with line cap suitable for current carrying capcity upto 100 Amps complete all as specified and directed.

Supply and fix cable jointing kit for 33 KV grade cable for out door termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 95 sq mm all as specfied and directed.

Supply, laying, testing & commissioning of HT 33 KV (earthed) XLPE insulated screened PVC bedded, electric power cable, galvanized steel strip or wire armoured (heavy duty) with aluminium conductor 33000 volts grade conforming to IS 7098 Part II, 1985 amended upto date, of size 3 core 95 Sqmm, ISI marked, laid in trenches or passing through pipes/ducts all as specified. Note :- 1. Excavation and earthwork, sand cushioning, GI pipe, cable protection will be measured and paid for separately 2. Cable shall be tested at high voltage test before & after laying.

Supplying, install and errect in true vertical position steel tubular swaged welded pole, 9.0 meter long, conforming to IS-2713 part-II, type 410 SP-31, complete with cast iron/MS base plate 6mm thick and of size 300x300mm, finial taper, pole cap, bolts, nuts, washers & screws etc., pole made out of ERW M.S. tubing including of holes of reqd Nos and size for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting three signal black colour bends at lower portion of exposed pole starting from plinth block , each band of 300mm height at 300mm spacing, painting pole No the white paint by stenciled letters/figures of 8cm height complete all as specified and directed . (Note: Excavation and earth work and PCC works shall be measured and paid separately in respected items.)

Supplying, install and errect in true vertical position steel tubular swaged welded pole, 11.0 meter long, conforming to IS-2713 part-II, type 410 SP-55, complete with cast iron/MS base plate 6mm thick and of size 300x300mm, finial taper, pole cap, bolts, nuts, washers & screws etc., pole made out of ERW M.S. tubing including of holes of reqd Nos and size for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting three signal red colour bends at lower portion of exposed pole starting from plinth block , each band of 300mm height at 300mm spacing, painting pole No the black paint by stenciled letters/figures of 8cm height complete all as specified and directed . (Note: Excavation and earth work and PCC works shall be measured and paid separately in respected items.)

s 10 KA-8 Nos f)Timer with synchronous timer 0-24 Hrs suitable for street light control and with suitable ML 3 contactor 3Ph phase 40 Amps capacity - 01 Set

Supply and fixing LED street light fitting 35 Watt single phase ,AC system luman efficiency not less than 120 lm/w,PF>.95, THD<10%,CCT 6000 to 6500K,CRI>80 outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver,impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and directed.

Al as item No 6.10 above but consisting of followings :- (FP-2) a) Aluminum bus bar capacity not less than 1.5 times of incommer b) MCCB 4 pole fixed type 63 Amp 16 KA - 2 Nos c) MCB SPN 6-32 Amps 10 KA -11 Nos d)Timer with synchronous timer 0-24 Hrs suitable for street light control and with suitable ML 3 contactor 3Ph phase 40 Amps capacity - 01 Set

Al as item No 6.10 above but Digital Ameter of 0-500A & consisting of followings :- (FP-1) a) Aluminium bus bar capacity not less than 1.5 times of Incommer b) MCCB 4 pole fixed type 100 Amp 16 KA - 1 Nos c) MCCB 4 pole fixed type 63 Amp 16 KA - 3 Nos d) MCB SPN 6-32 Amps 10 KA - 8 Nos e)Timer with synchronous timer 0-24 Hrs suitable for street light control and with suitable ML 3 contactor 3Ph phase 40 Amps capacity - 01 Set

Supply and fixing street light bracket made out of 40 mm light grade GI tubing minimum 1.2 mtr ling with suitable adapter to suit the opening of street light on one end alongwith integrated fabricated adapter round cup type with 4 Nos studs on outer side to fix the bracket on top of existing steel tubular pole two way,with necessary MS clamps with one coat of red oxide and two coats of aluminium paint upon fabricated adapter including nut, bolt, washers complete as specified and directed .

Supply and fixing LED street light fitting 140 Watt single phase ,AC system luman efficiency not less than 120 lm/w,PF>.95, THD<10%,CCT 6000 to 6500K,CRI>80 outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply & fix Juction box of size 155X210X92 mm IP 66 thermoplastic polycarbonate weather proof with degree of protection against mechanical load IK09 with plain walls of cables entries to be drilled individually .The juction box internally embedded polyurethane material gaskit.colour-black,RAL 9011. Fixed on pole with the help of MS nuts bolts & MS clamps - 2 Nos of size 40mm x 4mm thick with one No MCB SP 6 amp capacity mounted on din rail inside box. Work also includes making suitable hole in pole to take out connections to fitting if required at site.

Supply & fixing post top lantern light fitting 1X45 Watt LED type with Black ABS plastic spigot, spun aluminium canopy, with opal diffuser and accessories 1x40 Watt all as specfied and directed.

S&F Electrically operated sirens horizontal single mounting single phase 220/250 Volt,6000 RPM f/q 50 Audible range is 1.50 Km 1/4 HP all as directed.

ROAD / PATH / CULVERT / HARDSTANDING WORKS NOTE:- For items of ROAD / PATH / CULVERT / HARDSTANDING WORKS notes given at the beginning of SCHEDULE 'A' PART -VI (ROAD / PATH / CULVERT / HARDSTANDING WORKS) shall also be applicable.

M&L 150mm thick(compacted thickness) WMM (Wet Mix Macadam) (laid in two layers of 75mm each layer) prepared incontinuous mixing plant , spreading should be done by mechanical paver and not be dumped in heaps, power roller should be used for rolling and consolidated to gradient and camber required and the final layer should be allowed to dry for 24 hrs including necessary lateral support and formwork if required using crushed stone coarse aggregate of maximum size 40mm of grading as specified type igneous rock such as granite/trap/basalt etc complete all as specifed and directed.

SEWAGE DISPOSAL WORKS NOTE:- For items of SEWAGE DISPOSAL WORKS notes given at the beginning of SCHEDULE 'A' PART -VIII (SEWAGE DISPOSAL WORKS) shall also be applicable.

Construction of conventional LLDPE Septic tank designed to carry sewage and sullage water excavation in any type of soil ,PCC 1:4:8 beloq foundation ,vent shaft connection etc for 10 users.

M&L for RCC Conventional Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc. complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 users.

M&L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.8m x 3.00m as per TD drawing (CEBZ/TD/78/2011) complete all as spd

M&L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2 m x 1.5m as per TD drawing (CEBZ/TD/78/2011) complete all as spd

COMPOUND WALL AND FENCING WORKS NOTE:- For items of COMPOUND WALL AND FENCING WORKS notes given at the beginning of SCHEDULE 'A' PART -IX (COMPOUND WALL AND FENCING WORKS) shall also be applicable.

M&L for concertina coil fencing with required dia 600 mm up to 3 m height of wall with existing angle iron Y shaped placed 2,4 or 3 m apart and with 9 horizontal RBT stud tied with GI stample weight 43.47 kg /rmt complete all as specified and as directed.

M&L for Soakage wells excavation in ordinary soil, foundation in PCC 1:3:6 wells of honey combed and soild in M-25 concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25/SFRC interconnecting pipes of RCC/DWC complete Filling with brick bats, complete of size (3.6 m dia x 4.5M effective depth) complete all as per TD drawing (CEBZ/TD/78/2011) complete all as spd

M&L for Soakage wells excavation in ordinary soil, foundation in PCC 1:3:6 wells of honey combed and soild in M-25 concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25/SFRC interconnecting pipes of RCC/DWC complete Filling with brick bats, complete of size (3.6 m dia x 6.0 M effective depth) as per TD drawing (CEBZ/TD/78/2011) complete all as spd

ARBORICULTURE WORKS NOTE:- For items of ARBORICULTURE WORKS notes given at the beginning of SCHEDULE 'A' PART -XI (ARBORICULTURE WORKS) shall also be applicable.

Supply of following species of well grown (two year grown) healthy tree sapling with good root system & not less than 2 feet height and excavating a pit (0.6x0.6x0.6) and placing the sappling in the respective pit including watering, manure and spraying pesticieds etc as specified including replacement of dead plant and regular maintenance till the completion of maintenance period of two years (i.e, regular watering, dewedging of soil fortnightly, manuring & fertilising thrice, loosening anually training, pruning & stacking, spreading fungicides as and when required and directed :-

Bottle Palm

Ashoka Round

Gulmohar

Supply of species of well grown healthy grass with good root system and placing the sappling in the respective area including watering and spraying pesticieds etc as specified including replacement of dead plant and regular maintenance till the completion of maintenance period of two years (i.e, regular watering, weeding, manuring & fertilising thrice, loosening anually training, pruning & stacking, spreading fungicides as and when required and directed.

Sprinklers network for watering purpose in lawn area

S&F tree guards made of welded steel wire fabric dia of wire not less than 2 mm dia supply and fixed to wood or steel members and supported with flat iron (25x5 mm) fillet (for securing the mesh) and three legs in angle iron (30x30x5 mm) welded to the tree guard below and insurting it into ground and preparation of new surface and priming with red oxide zinc chrome and applying two coats of synthetic enamel paints ordinary tint including necessary excavation and PCC 1:3:6 type C1 complete all as specified and directed.