Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.1 LAccepted-AOC 325 NURSINGARH BALGARDEN SRINAGAR NEAR MODERN PUBLIC SCHOOL SRINAGAR JAMMU KASHMIR 190010 UDYAM JK 21 0037262 | SRINAGAR | JAMMU AND KASHMIR | 190010 | L1 | Accepted-AOC Tender awarded to M/s Ultra Industries being L-1 | |
| 2 | L2₹39.1 L+₹6,985.25 (0.18%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹39.7 L+₹62,319.74 (1.60%)Rejected-Finance | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹40.1 L+₹98,854.05 (2.53%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹41.2 L+₹2.1 L (5.36%)Rejected-Finance | L5 | Rejected-Finance Not being lowest |
Tender Value
₹38.7 L
EMD Value
₹77,500
Closing Date
26 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 860 EWS
GE 860 EWS Pin 913860 C/o 56 APO
SPL REPAIR TO ENGINE OVERHAUL SEC (T-439) AND GENR SEC (T-438) OF 603 EME BN AT KARU UNDER GE 860 EWS
2023_MES_601077_1
8152/2023-24/E8
Open Tender
Civil Works
Item Rate
270 days
KARU
Refer NIT
9 documents required · 9 mandatory
₹500
GE 860 EWS
₹77,500
Yes
1 Sept 2023
5 Jun 2023
28 Jun 2023
5 Jun 2023
26 Jun 2023
20 Jun 2023
Amount
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering or wall etc, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for Complete all as specified and as directed by Engr-in-charge.
S&F Mild steel work in tubular trusses, rafters, purlins including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240, complete all as specified and directed.
S&F Rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 Gde E-165), complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified
Demolition of concrete (Un-reinforced) including tiles/kota slab etc. in ground floor and paving etc in exec 15 cm thick below or above GL, complete all as specified and directed.
M&L for 100mm thick cement concrete type B-2, 1:2:4 using 40mm graded crushed stone aggregate as in floor, finishing the surface even and smooth without using extra cement complete all as specified.
M&L for 75mm thick cement concrete type C-2, 1:3:6 using 40mm graded crushed stone aggregate as in plinth protection and finishing the surface even and smooth without using extra cement complete all as specified.
Dismantling of boarding in wall/ceiling, any description, fixed in any position with nails or screws complete all as specified and directed by Engr-in-Charge. (Note: Taking down carefully old FTL fitting recessed mounted light fittings/ceiling complete with all accessories and making necessary electric connection, complete all as specified & directed by Engr-in charge.
M&L for 4mm thick 3 Nos of ply veneered decorative plywood grade1 (with BWR, resin) with one side of decorative veneered face fixed with screw to timber frame work in ceiling/wall complete all as specified and as directed.
M&L for 9mm thick pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws/nails to timber frame work in wall/ceiling portion complete all as specified and as directed.
S&F grid false ceiling GI system powder coated prelude (main runner section 32x24x0.30x3600mm, cross tee 25x24x0.30x1200mm, wall angle 24x24x0.40x3000mm and including providing and fixing PVC pre-laminated in frontside and aluminium foil backed gypsum tile board of size 595 x 595 x 8-9mm fixed in ceiling frame work with necessary fastening GI wire and cleats complete all as specified and directed.
Dismantling of timber scantling in fillets, posts, rafters, purlins etc under 40Sq. Cm in section complete in framed work complete all as specified and as directed..
M&L for 2nd class hard wood timber scantling plain fillets square, rectangular in section area exc 13 Sqcm and not exc 25sqcm secured with nails complete all as specified and as directed.
M&L for 2nd class soft wood fillets sectional area exc 3 and n exc 6 sqcm rectangular or triangular in section but bullnosed, splayed, chamfered or rounded on one edge of face, secured with nails or brads, complete all as specified and as directed.
M&L in repairs, to replace old and decayed timber and fix Second Class Hard Wood clean sawn in scantling, complete all as specified and as directed.
M&L for 5.5mm sheet glass ordinary quality white or tinted fixed in wooden frame in squares exc 0.5 sqm each pane including hacking out old broken glass, complete all as specified and as directed.
Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and as directed.
M&L point wiring complete with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed MS sunken box of suitable size flush with wall surface, covered with & incl 3 mm thick bakelite, laminated hylem sheet / Gang box for top cover suitable for fixing of piano type switches / sockets etc, complete all as specified and directed for the following :- (Note : The cost of MS sunken box with 3 mm thick bakelite, laminated hylem sheet top cover is deemed to be included in quoted rate.)
All as per Srl Item No 21 here-in-before but One light point controlled by one no, 1-way, 5 Amps switch.
All as per Srl Item No 21 here-in-before but One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch.
All as per Srl item No. 21 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.
S&F, in repalcement, of Switch piano type, single pole, one way, 5 amps, 230 volts, complete all as specified and directed.
S&F, in repalcement, of Switch Socket,Combination two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed.
S&F, in repalcement, of Switch Socket Combination 6 pin, 5/15 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed.
S&F, in repalcement, of Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.
S&F in replacement of DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.
S&F in replacement of DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.
S&F in replacement of MCB, C Curve type, 10 kA,63 Amp, TPN with over load and short circuit protection, complete all as directed.
S&F in replacement of MCB, C Curve type, 10 kA,63 Amp, SPN with over load and short circuit protection, complete all as directed.
S&F in replacement of MCB, C Curve type, 10 kA, 6 to 40 Amp, Single Pole with over load and short circuit protection, complete all as directed.
M&L for sub main wiring with 2 run of 6 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate, ISI marked, PVC casing Caping 19 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : 1. The cost of conduit & accessories is deemed to be included in quoted rates. 2. The two run of 6.0 Sqmm wire and one run of 6 Sqmm wire will be measured as one unit.
M&L for sub main wiring with 2 run of 4 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 4.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate, ISI marked, PVC casing Caping 19 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : 1. The cost of conduit & accessories is deemed to be included in quoted rates. 2. The two run of 4.0 Sqmm wire and one run of 4 Sqmm wire will be measured as one unit.
Supply and laying XLPE insulated, armoured, heavy duty electric cable, with stranded aluminum conductor 1100 V grade nominal cross sectional area 16 Sqmm, 4 core laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-Charge
Excavation in trenches in hard / dense soil not exceeding 1.5 m in depth and not exceeding 1.5 m wide and getting out including trimming of sides, for laying of cables & foundation of poles, stay assembly, complete all as specified and directed by Engr-in-Charge.
Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick, complete all as specified and directed.
Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point, complete all as specified and directed.
Taking out old unserviceable/serviceable un-reinforced concrete PCC cable covers from excavated trench all as directed . Note:- Serviceable un-reinforced concrete PCC cable cover kept in safe custody for reuse at site and unserviceable un-reinforced concrete PCC cable cover through in low lying area.
Laying only old reinforced PCC cable cover of any size as retrieved from serial item No- 39 above, complete all as directed by Engineer-in-Charge.
M&L for factory made un-reinforced pre cast concrete cable protection cover LV class type - I with size 250mm x 150mm x 40mm laid across the cable (i.e. width of cover along the length of cable) for UG cable protection on the top of the sand cushioning, complete all as specified and directed by Engr-in-Charge.
M&L for sand cushioning with layer of sand 8cm thick before laying of cable and 10cm after laying of cable in trenches complete all as directed and sand cover to UG cable, complete all as specified and directed by Engr-in-Charge. NOTE: Punned down thickness of sand shall be measured for payment purpose.
M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.5 of MES SSR 2009 Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work, complete all as specified and directed.
M/S TRADE LINK
M/S LIBE and CO
M/S MUNEER HASSAN AKHON
M/S GLOBAL ENGINEERS
BETONG BUILDERS
M/S BHAT ENGINEERS
M/S MA CONSTRUCTION Co
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .