PROVN OF SHED, FLOORING WITH INTERLOCKING TILES FOR TRAINEES INFORNT OF SHO OFFICE AND CABLE DUCT AND ALLIED WORKS IN CH(CC) AND SPECIAL REPAIR OF WATER SUPPLY LINE AT CSD DEPOT UNDER GE E/M LUCKNOW

Amount

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes etc n exc 10 sqm on plan and not 1.5 m depth and getting out in soft / loose soil complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum getting out in soft / loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm including removing of surplus soil to a distance n. exe 50 metre complete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated mtrl from site n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point.

M&L for Plain cement concrete 1:4:8, type D-2, using 40 mm graded stone aggregate, in foundations, filling and mass concrete complete all as specified and directed.

M&L for Plain cement concrete 1:3:6, type c-2, using 40 mm graded stone aggregate, in foundations, filling and mass concrete complete all as specified and directed.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, using old size bricks complete all as specified and as directed by Engineer-in-Charge.

M&L for Brick work with Fly ash brick designation 100 Kg / Sqcm, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4, using bricks of size 230 mm x 110 mm x 70 mm confirming to IS 12894, complete all as specified and as directed by Engineer-in-Charge.

M&L for Moorum / red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete.

M&L for hardcore of guage exc 63 mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled / rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8, type D2 using 40 mm graded aggregate as in sub base all as specified and as directed by Engineer-in-Charge.

M&L for 100 mm thick PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in floor, laid in alternate bay system finish the surface fair & even complete.

M&L for 25 mm thick plain cement concrete 1:2:4, type B0 using 12.5 mm graded stone aggregate as in Damp proof course to horizontal or vertical surfaces including necessary formwork and mixing only waterproofing compound as per manufacturers instruction complete all as specified and directed. Note:- WPC will be measured & paid seperatly.

Supply only Integral waterproofing compound

M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete wall surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on brick work or cement concrete wall surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for Pre cast RCC 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for soakage well / manhole and similar works supported on walls and set in cement mortar 1:4 complete. Note:- Reinforcement steel will be measured & paid separately

M&L for mild steel TMT bars 10 mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binging with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified.

S&F mild steel Joist, channel, angle, or tee sections, fixed & embadding for cable duct including all connected works, confirming to Fe-410- W(Gde- E-250) quality-A including two coats synthetic enamel paint over one coat red oxide primer complete.

M&L for preparation of new plastered surface of walls and applying two coats of exterior emulsion weather coat paint over a coat primer over 2 mm thick approved wall care putty complete.

M&L for preparation of newly plastered surfaces of walls and apply two coats of oil bound distemper over one coat of primer including 3 mm thick cement base wall care putty in two coats complete.

M&L for preparation of new steel surface of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed by Engineer-in-Charge

M&L for 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes, complete complete all as specified and directed.

M&L suspended false ceiling, comprising 12.5 mm thick reinforced gypsum boards conforming to IS-2095, GI perimeter channels, intermediate channels, etc including finishing the exposed surfaces with oil bound distemper two coats over one coat of primer over a coat of 2 mm thick cement base wall care putty complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C2, using 40 mm graded stone aggregate, as in plinth protection, finish the surface even and smooth without using extra cement complete all as specified and directed.

S&F powder coated allumium sections for door frames with double leaf shutters complete duly fitted with neosprene rubber beading, heat absorbing glass panes 4.8 mm nominal thickness, alu anodised with rubber shoe floor door stoppers - 2 Nos, floor spring - 2 Nos, Handle - 2 Nos in each shutter, aluminium tower bolt - 1 Nos in each shutter and necessary locking arrangement with mortice lock with duplicate key complete all as specified and directed (Note:- Floor spring measured and paid seperately.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roor covering / clading to wall, fixed with self tapping screws complete all as specified and directed.

M&L for steel work in tubular trusses incl special shaped washer etc, complete using ERW or induction butt welded tubes complete all as specified.

Material & Labour for machine pressed precast concrete interlocking paver block of approved shape and size of 80 mm thickness, with minimum compressive strength of 40 N / Sqmm (M-40 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface, with white cement and pigment laid in path / hardstanding laid over and including 25 mm thick (compacted thickness) dry reiver sand cushning complete.

Material & Labour for conceled point wiring for one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn and including PVC conduit not less than 20 mm wide, including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc including pressed steel terminal box of suitable size with laminated white top sheet cover of 3.00 mm thick complete.

Material & Labour for conceled point wiring for one 5 Amps socket outlet on independ board controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn and including PVC conduit not less than 20 mm wide, including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc including pressed steel terminal box of suitable size with laminated white top sheet cover of 3.00 mm thick complete.

Material & Labour for conceled point wiring for one 15 Amps socket outlet on independ board controlled by one, one way switch complete with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn and including PVC conduit not less than 20 mm wide, including all accessories like bend, tees, junction boxes etc. including 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc including pressed steel terminal box of suitable size with laminated white top sheet cover of 3.00 mm thick complete.

S&F Switch Piano type, polycarbonate body, single pole, one way 6 amp, 230 V, including connecting complete.

S&F Switch Piano type, polycarbonate body, single pole, one way 16 amp, 230 V, including connecting complete.

S&F socket outlet polycarbonate body 6A- 230 V, 2/3 pin, including connecting complete.

S&F socket outlet polycarbonate body 20 A- 230 V, 3 pin 6 A & 3 pin 20 A , including connecting complete.

M&L for Ceiling rose ceiling rose , 3 plate, polycarbonate body 6 Amps, 230 volts AC, including connecting complete.

Supply and fix electronic type fan regulator of 120 watt, 230 volts AC, including connecting complete.

S&F distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper busbar, neutral bar, earth bar, IP 43 protection, single pole and neutral 250 Volts, flush to wall complete all as specified and directed.

Supply and fix MCB’s single pole 6-32 Amps, 230 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

Supply and fix MCB’s single pole & neutral 40 Amps, 230 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

Material and labour for renewal earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to galvanized steel wire 4 mm dia by means of bolts nuts check nuts and washer of galvanized steel, watering pipe of 20 mm bore, galvanised iron, medium grade, and 15 mm bore galvanised iron light grade for earth wire protection including all excavation earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 and RCC 1:2:4, type B1 for precast chamber cover 50 mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), with charcoal, salt, funnel complete all as shown in the electrical plate No 3 of SSR part –I and testing on completion.

Note:- Quoted rates shall be deemed to include for earth wire with protection pipe up to 7.5 M length.

S&F energy efficient LED recess type light fitting 36 watt of size 600 mm x 600 mm, made of CRCA sheet powder coated finish, fully covered with PMMA acrylic lumio diffuser, with built in SMD type LED & integral LED driver with all accessories, fixing arrangement internally pre-wired, fixed in position by cutting false celing & connecting complete all as specified and directed by Engg –in-charge.

S&F energy efficient LED tube light fitting with built in LED & integral LED driver 20 watt, channel housing & diffuser of length 1200 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.

S&F fix in lamp holder Polycarbonate type with back plate suitable for batten fitting complete.

Supply and fix ceiling fan 1200 mm sweep with all accessories such as hanging rod, canopy as per manufacturer norms, hanging in position and connecting with and including 1.5 Sqmm, 3 core copper conducter wire, complete as specified and directed by EIC

Supply & lay XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium conductor 1100 volt grade of size 16 Sqmm, 3.5 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc complete all as specified & directed. Note:- Earthwork, sand cushion, cable cover will be measured and paid separately under respective items of this Schedule.

Supply and Laying of bricks well burnt sub class B (old size) laid flat for cable protection width equal to the length of bricks complete all as specified and directed by Engineer-in-Charge.

M&L for providing dry river sand as in sand cushioning below and above cable thickness as specified in SSR to under ground cable including punning down of sand in layer all as specified and directed by Engg-in-Charge. Note: for measurement purpose punned thickness of sand will be consider.

Taking up and down 15 mm bore GI pipe laid in trenches / wall / floor and remove from site complete all as specified and directed . Note: Excavation & earth work shall be measured and paid separately.

All as per Item No 51 above but GI pipe of size 20 mm bore.

All as per Item No 51 above but GI pipe of size 40 mm bore.

All as per Item No 51 above but GI pipe of size 80 mm bore.

S&F 15 mm bore mild steel galvanised iron pipe, medium grade with and including all new fittings and fixed complete to wall / ceiling or laid in floor / trenches etc. complete all as specified and directed

All as per Item No 55 above but GI pipe of size 20 mm bore.

All as per Item No 55 above but GI pipe of size 40 mm bore.

All as per Item No 55 above but GI pipe of size 80 mm bore.

Refixing of 20 mm bore GI tubing, medium grade including all fittings like sockets, elbows, bends, Tees, unions, short pieces etc. fixed to wall complete all as specified and directed. Note:- GI tubing retrived from item No 52 above shall be used.

Refixing of 80 mm bore GI tubing, medium grade including all fittings like sockets, elbows, bends, Tees, unions, short pieces etc. fixed to wall complete all as specified and directed. Note:- GI tubing retrived from item No 54 above shall be used.

S&F in replacement 15 mm size gun metal globe or gate valve 'ISI marked' with iron wheel head screwed both end for iron pipe all as per latest IS specifications complete.

S&F in replacement 20 mm size gun metal globe or gate valve 'ISI marked' with iron wheel head screwed both end for iron pipe all as per latest IS specifications complete.

S&F in replacement 80 mm size gun metal globe or gate valve 'ISI marked' with iron wheel head screwed both end for iron pipe all as per latest IS specifications complete.

S&F in repairs cast iron specials 'ISI marked' for pressure water mains up to 150 mm bore spigot and socket Tee, pieces, single or double branch connection or collar etc. compleet all as specified and directed. Note - Excavation, earth work shall be measured and paid for seperatly).

Cutting in position 150 mm bore cast iron water mains for insertion of new tee for branch connection all as directed

Drilling & Tapping cast iron water mains in postion for 15 mm bore branch connection complete.

Drilling & Tapping cast iron water mains in postion for 20 mm bore branch connection complete.

M&L for valve chamber of size 650 mm x 650 mm x 650 mm (internal dimension) with and including PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) for foundation, 230 mm thick brick wall with sub class B brick using old size brick in CM 1:4, 15 mm thick rendering in cm 1:6 all around, PCC 1:2:4 (using 20 mm graded stone aggregate for grouting of 40 x 40 x 5 mm angle iron frame, 4 mm thick mild steel sheet top cover, locking arrangement with 50 mm pad lock with double key - 01 No including painting with two coat of synthetic enamel paint over a coat of red oxide primer including demolition of old chamber necessary excavation earth work, etc complete all as specified and directed .

Cutting of road (in hard / dense soil ) for laying pipe line or repair to pipes / lead joints etc .of any size upto 01 mtr. Depth and getting out incluiding forming bottom surface to required level all as specified and directed.

M&L for Chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick, in mixture of gray & white cement in equal apportion, set, jointed in neat cement slurry & pointed in coloured cement, as in floors / hardstanding, laid over screed bed complete all as specified and directed

M/S ANIL ARORA

M K Engineers and Contractors

M/S Reliance Construction

m/s pal associates

Divya Jyoti Constructions

M/s A.P. Enterprises