Kavinagar zone chatra k antargat sanjaynagar fortune hotel se gulmohar cut tak sadak ka sudhar karye

Scraping old painted surface including disposal of all scraped material to a distance of 30 meters (100 ft.) as directed by Enginer­ in-charge. (by machnical)

Providing laying spreading and compecting graded stone aggregate to wet mix macadam specification including premixing the material with at OMC in machenical mix plant carriage of mix material by tipper to site laying in uniform layers of each 100mm thick with paver in sub base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Cement Concrete Pavement (Construction of M40 grade un-reinforced, dowel jointed at construction joint, plain cement concrete pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including providing of construction joints, separation membrane (where DLC is done), admixtures, tie bar, fibre mesh, curing compound, finishing to lines and grades as per drawing.The White topping without fibre mesh shall not be accepted.Item does not includes cost of dowel bars, Tie Bars, fibre mesh (PSFR) & cost of groove cutting & filling. It should be paid seperately.

providing and laying microaurfacing course compriaing of dry fine aggregate conforming to type -ii grading polymer modified/ latex modified bitumen emulsion fillir ( ordinary portland cement ) chemical additive and water as per IRC:SP:81-2008: over a previously prepared surface.

providing and laying microaurfacing course compriaing of dry fine aggregate conforming to type -iii grading polymer modified/ latex modified bitumen emulsion fillir ( ordinary portland cement ) chemical additive and water as per IRC:SP:81-2008: over a previously prepared surface.

S/L Hot applied Thermo Plastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area thick ness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35. the finished surface to be level uniform and free from streak and holes. rates all including of all taxes royality vat etc all t & p /machine material and lobour required for proper complition of work.

Reflective Raised pavement marker providing and fixing of raised pavment markers (cat eye) type x ASTMD - 4956-04 avery dennission /3m (USA make) having moulded body of polycabonate ASA, HIPS or ABS able to support a load of 13.635 MT tested in accordance with ASTMD 4280 type H and other requirement mentioned in MoRT&H circular its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light ), electronically welded to the body. The length, height and wiedth of the body shall not exceed 130mm 20mm, and 105mm respectively, The area of each reflective surface shall not be less than 13 Sq. cm. on each side stoping at the angle of 35+5 degree to the base to ensure maximum reflectively. it shall comply to specification of category A of MoRT&H circular no. RW/NH 33023/10/97-DO-III dated 11.06.97 lenses shall be moulded of methyl methecrylate corforming to ASTMD 788 or equivalent. with 7 years warranty. Rate shall be inclusive of all taxes, royalty, VAT etc. All T&P machine and labour required for proper completion of work.Note: The composite warranty jointly signed by original manufacturer & authorized converter of at l

Providing wall putty on old surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats.AS PER PWD SOR 2022 662 NEW ITEM .

Wall paint with acrylic emulsion paint ( prakartiik emulsion eco friendly made by cow dung paint) having VOC content less than 50 gram liter approved brand manufacture ) including appliying additional coats wherever required to achieve even shade colour one new work for two coats. DSR 13.83

M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work.PWD SOR 2022 10.21 .