Restoration of Road cum marginal embankment from Aswaclanta to Tilling Gaon by constructing flood wall along with A/E measures to protect the bank from the erosion of river Brahmaputra

Amount

Earthwork in excavation for structures as per drawing and technical specificationsClause 305.1 including setting out, construction of shoring and bracing, removalof stumps and other deleterious material and disposal upto a lead of 50 m,dressing of sides and bottom and backfilling in trenches with excavated suitable material. V. Marshy soil

Fillling in foundation trenches as per drawing and technical specification Clause305.3.9 I Sand filling

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 A With crushed Stone II P.C.C grade M 15 , Nominal mix 1:2.5:5 ( Hand mix)

Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 (A) With crushed stone (I) R.C.C grade M 20 (i) For nominal mix 1:2:4(a) Height upto 5 M

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

Supplying, fitting and placing TMT IS:1786 (Fe 500) bar reinforcement in sub-structure complete as per drawing and technical specifications(a) TMT-IS 1786 ( Fe-500 D) Primary Producer (TATA/ SAIL/ Esser Steel/Jindal panther steel/ Shyam steel or equivalent)

Reinforcement in Super Structure: Supplying, fitting and placing TMTconforming to IS:1786 Fe 500 D reinforcement in super-structure including splicing complete as per drawing and technical specifications TMT-IS 1786 ( Fe-500 D) Primary Producer (TATA/ SAIL/ Esser Steel/ Jindal panther steel/ Shyam steel or equivalent)

Providing, driving with hydraulic piling rigs with power units and installing driven cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embedded in the pile cap etc. all complete. (Length of pile for payment shall be measured from top of shoe to the bottom of pile cap) : 20.1.3, 500 mm dia piles

Vertical load testing of piles in accordance with IS 2911 (Part IV)including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. Note: 1. Initial and Routine Load Test shall not be carried out by Dynamic method of testing. Note: 2. Testing agency shall submit the design of loading platform for the approval of Engineer-in-charge.20.6.1 Single pile upto 50 tonne Safe capacity 20.6.1.2 Routine test (Test Load 1.5 times the Safe capacity)

12 mm cement plaster of mix : 13.4.1 1:4 (1 cement: 4 coarse sand)

Earth work in embankment by Mechanical means by truck carriage with locally available ordinary/normal soil excluding sandy and rocky soil free from roots & vegetation and filling in uniform layers not exceeding 25 cm thick including ploughing or roughening or benching the seats, removing all debries, breaking clods up to 4 cm cube, dressing as per design section and compaction in layers not exceeding 30 cm in thickness and core cutter soil test at every layer and every 500 m distance, etc. complete as directed. A. Compaction with three wheel static roller of 80-100 kN capacity (Lead=2 km)

Construction of temporary shed of two roof with mud plinth of 0.45 m height above ground level with Bhaluka bamboo post 1.5 m apart, driven at atleast 0.75 m below ground and height above plinth of 2.5m. Split Jatti bamboo/tarza wall 10 cm thick touch roofing over bamboo rua frame, placing at 0.15 m clear apart, fitted with bamboo kamies from binding doors and windows with Bamboo Chattai, strengthening with Bamboo frame binding with wire, roofing with TATA Shaktee roofing sheets etc., complete as directed. (Using Bhaluka Bamboo at the rate of 6.00 nos/ Rm & Jati Bamboo at the rate of 61.00nos / Rm)

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7

Supply of Geo-textile bags of type-A (1.03 × 0.70 m) inner to inner made of Geo-textile non-woven fabric sheets of 400 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as per IS 16653:2017 i. Wide Tensile strength (MD) ≥ 20KN/m & Wide Tensile strength(CD) ≥20 KN/m ii. Elongation (MD) ≥50% & Elongation (CD) ≥ 50% iii. Abrasion ≥ 95% iv. Trapezoidal Tear Strength (MD) ≥ 450N & Trapezoidal Tear Strength (CD) ≥ 450N v. CBR Puncture strength ≥ 4000N vi. Permittivity ≥ 1.10s – 1 vii. Permeability ≥ 40l/m2/sec viii. AOS ≤ 75 micron ix. UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80% x. Mass ≥ 400 gm/m² xi. Thickness at 2KPa ≥ 3 mm xii. Seam strength ≥ 80 % of actual fabric strength. Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (Bags are to be supplied of 100 numbers in a bundle, properly packed with each bag having proper tag with name of Manufacturer, Batch Number, the GSM and type of polymer encrypted and stitched on top corner and each bag is to be marked with “WRD Govt. of ASSAM” to be printed distinctly. Test Certificate from approved NABL accredited and ISO (Certified Laboratory should invariably be submitted against each batch of material)

Supply of Geo Bags Type-B (Size 2.00 m × 1.50 m inner to inner) (Pillow Type) made of composite layers of Polypropylene (PP) fibre as per IS 16653:2017 for Nonwoven and IS 16654:2017 for Woven: Woven Geo-textile for the outer cover (300gsm): The woven geo textile is woven with multifilament woven fabric manufactured from ultra violet stabilized polypropylene. Geo-textile used to manufacture geo textile bags should have high mechanical properties for enhanced durability along with enhanced puncture, abrasion and U.V. resistance characteristics. Geo-textile should be inert to biological degradation and resistant to naturally encountered chemicals, alkalis, and acids. Properties i. Tensile strength (MD) ≥ 80 KN/m & Tensile strength (CD) ≥ 70 KN/m ii. Elongation (MD) ≤ 25% & Elongation (CD) ≤ 25% iii. Abrasion ≥ 75% iv. Trapezoidal Tear Strength (MD) ≥ 1500N & Trapezoidal Tear Strength (CD) ≥ 1300N v. CBR Puncture strength ≥ 900N vi. Permeability ≥ 18 l/m2/sec vii. AOS ≤ 250 micron viii. UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80% ix. Mass ≥ 300 gm/m² x. Seam strength ≥ 50 % of actual fabric strength. Non-Woven Geo-textile for the inner layer (300gsm): It is needle punched non-woven geo-textile made of 100% polypropylene staple fibres which are formed into a random network for dimensional stability. It should resist UV degradation, rotting and alkalis. Properties i. Wide Tensile strength (MD) ≥ 15 KN/m & Wide Tensile strength (CD) ≥ 15 KN/m ii. Elongation (MD) ≥ 50% & Elongation (CD) ≥ 50% iii. Abrasion ≥ 95% iv. Trapezoidal Tear Strength (MD) ≥ 340 N & Trapezoidal Tear Strength (CD) ≥ 340 N v. CBR Puncture strength ≥ 3000 N vi. Permittivity ≥ 1.25 s-1 vii. Permeability ≥ 60 l/m2/sec viii. AOS ≤ 75 micron ix. UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80% x. Mass ≥ 300 gm/m² xi. Thickness at 2KPa ≥ 3 mm xii. Seam strength ≥ 80 % of actual fabric strength. Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge. (Bags are to be supplied of 15 numbers in a bundle, properly packed with each bag having proper tag with name of Manufacturer, Batch Number, the GSM and type of polymer encrypted and stitched on top corner and each bag is to be marked with “WRD Govt. of ASSAM” to be printed distinctly. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material)

Supply of non-woven Geo-textile fabric sheets of 300 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as per IS 16653: 2017 (i) Wide Tensile strength (MD) >15KN/m & Wide Tensile strength (CD) >15 KN/m (ii) Elongation (MD) >50% & Elongation (CD) >50% (iii) Abrasion >95% (iv) Trapezoidal Tear Strength (MD) >340 N & Trapezoidal Tear Strength (CD) >340 N (v) CBR Puncture strength >3000 N (vi) Permittivity >1.25 s-1 (vii)Permeability >60l/m2/sec (viii)AOS <75micron (ix)UV Resistance @500 hours retained Tensile strength (MD) & (CD) >80% (x) Mass >300gm/m2 (xi)Thickness at 2KPa >3mm. (Each Roll of Geo Fabric Sheet should be supplied in properly packed Bundles and should be marked with the Name of Manufacturer, Batch Number & its dimensions clearly on each roll with "WRD Govt of ASSAM" to be printed on it and mentioning properly the GSM and type of polymer and Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material).

Construction and supply of Wire -netting box of size 1.50 m x 1.50m x 0.45 m made with mechanically woven, double twisted, hexagonal shaped wire mesh with wire made of low carbon, high ductile MS wire with heavy class of galvanization woth an additional layer of PVC coating with mesh type of 10 x 12 as per EN 10223 & ASTM A975, mesh wire of 2.70 mm (I.D) /3.70 mm (OD) tensile strength of 450-500/mm2, edge wire slevdge around it at least 2.5 times, lacing wire (zinc PVC coated ) of 2.20mm (1.D)/3.20mm (OD), VC coating thickness of 0.50mm nominal, 0.38 mm minimum, Mesh opening size 150mm x 150mm and with average weight per unit being 12 kg with additional 3% of the weigth of box for lacing wire supplied separately, supporting the facing of the box with zinc coated steel wire of required length as directed, compling with ASTM and Europian norms.

Supply of Sewing Thread/Yarn PPMF Stitching Thread (2000 Den. Kaplon).

Collection and supply of River silt by truck carriage free from debries and other foreign material, etc. complete as directed. By manual Means For beyond initial 1 Km & up to 10.00 Km & for all lifts.

Filling and laying of nonwoven Geo - textile bag of dimension 2.00 m × 1.50 m excluding excavation of specified sand/silt from flood plain or adjacent chars within a distance of 90 m of the work site, filling geo bags with sand having minimum volume 0.612 Cum after filling, double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, laying at proper site including all handling charges and local carriage within a distance of 100 m complete as directed. (Sand/silt, Geo Bag and Polypropylene thread will be supplied by the department free of cost) With Engine Boat

Filling and laying in cage with silt filled Geo bags of size 1.03m X 0.70m excluding excavation of specified silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand having minimum weighing 126.00 Kg and minimum volume 0.084 cum after filling ,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly. in cages made of wire netting sheets of size 2.57x1.66m of 8G galvanized wire making the cage from 2 nos. of wire netting sheet by tying the projected wires complete as directed. (Geo Bag , Wire Netting Sheets and Polypropylene thread will be supplied by the department free of cost) Without boat

Filling and laying of Geo bags of size 1.03 m × 0.70 m excluding excavation of sand/silt from flood plain or adjacent chars within a distance of 90 m of the work site, filling geo bags with sand/silt having minimum weighing 126.00 Kg and minimum volume 0.084 Cum after filling , double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150 m and laying properly as directed. (Sand/silt, Geo Bag and Polypropylene thread will be supplied by the department free of cost) Without boat

Labour charge for laying Geo fabric sheet as filter bellow pitching including carrying, lapping, wrapping & stitching as directed by the Engineer-in-Charge.

Supply of Pre stressed Cement Concrete (PSC) Porcupine members of size 0.10m X 0.10mX 3.00m with M-30 grade of cement concrete conforming to IS 1343:2012 using super-plasticiser @ 1.20lit/bag of cement with graded broken course aggregates up to 20mm size down conforming to IS 10262:2009 & IS 456:2000 and reinforced with 4 Nos. of 4 mm dia high tensile steel wire cable/strand with necessary cover and 4mm high tensile stirrups at 250mm C/C, in conformity with IS-6403:R2002 and stressed to required strength not exceeding 9.18 N/mm, holes of 16 mm dia at 50 cm inside from both ends in the same face and in either face of post another 2 Nos. of holes of size 16 mm dia at 65mm inside from both ends including properly curing for 21 (twenty one) days and carriage of porcupine members from factory to the stack yard within a distance up to 50Km including loading , unloading & stacking complete as directed.

Carriage of PSC Porcupine members of size 0.10m X 0.10mX 3.00m from stackyard to Work site including loading, unloading and stacking (Distance=1 Km)

Labour charge for launching of PSC Porcupine including carriage of PSC porcupine members of size 0.10m × 0.10m × 3.00m from the stack yard to the place of launching, erection of the Porcupine with 6 (six) members properly, supply & fitting/fixing with 12 mm dia 25 cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 150 m) Launching Without Boat

Labour charge for launching of PSC Porcupine including carriage of PSC porcupine members of size 0.10m × 0.10m × 3.00m from the stack yard to the place of launching, erection of the Porcupine with 6 (six) members properly, supply & fitting/fixing with 12 mm dia 25 cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 150 m) Launching by Boat

ZED ENGINEERS