Supply and Placing of Furniture in PG Hostel Block at Mahila Chikitsalay, Sanganeri Gate, Jaipur

Amount

Bed: Providing and placing in position single bed with an overall size - 1925mm (L) X 965mm (W) X 1000/450mm (H) without mattress. The construction of the bed shall be supplied in knock down with metal frame made out of MS/CRCA steel pipe having cross-section area 50mm X 25mm with 1.2mm thick. Head and tail panel shall be constructed from CRCA round pipe having dia. 19mm X 1.2mm thick and 15.8mm with 1.2mm thick. The mattress panel shall be made of 19.05mm X 19.05mm square pipe with 1mm thick or 1mm thick CRCA sheet having with wleded to the structure ensuring no sharp edges on top surface or the prelaminated particle board of 15±1 mm or 12mm thick plywood shall be fitted as top sheet but should not bend at any of the area and shall have proper support all around the bed. The legs shall be made of M.S.E.R.W pipe having crosssection area 40mm X 40mm with 1.2 mm thick. All metal part shall be powder coating finish with DFT(Dry Film Thickness) - 35µ min. The PPCP shoes shall be insert into bottom of legs for avoid skretches on the floors.

Foam Mattress : Providing and placing of mattress of approve make like sleepwell or equvilent make etc. with an overall size of 1800mm (L) X 900 (W) and 120 mm thickness. The base of the mattress to be made in polyurethane foam having 40 density. The fabric of the mattress to be quilted cover on both the isdes. The edges of the mattress to be sealed with a fabric tape with the help of a machine. The mattress shall have a guarantee of 5 Years against ay manufacturing defect.

Study Table : Supplying and placing a modular table with an overall size 1200mm X 600mm X 750mm. The top of the table shall be made of 18mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel with the assistance of edge banding machine at 200 degree celsius. The table understructure shall be supplied with MS powder coated round leg pipe 50 x 1.2mm. Fixed pedestal unit shall be supplied with 1 nos. of drawer +1 filing at one side. Facia of drawer and filling in 18mm PLPB board The drawer shall be synchronized locked with locking mechanism by one single key. The drawer shall be operated with Aluminium recessed handle. The board used should meet International Standard of quality.

Study Chair : Supplying and placing chair. The seat and back shall be made of injection moulded polypropylene shell. The seat shall be upholstered with HR PU foam 19mm thick having density 40kg/m³ with leatherite tapestry 0.8mm thick and 535GSM. The PP shell shall be supplied in perforated position and fixed with main frame. The frame structure shall be supported by four legs made up of MS/CRCA powder coated tubular pipe frame having cross-section area 25mm X 12mm with 1.6mm thick. There shall be co-polymer PP shoe provided at the base to avoid scratches on the floor. The seat size shall be 400±10 mm(D) X 410±10 mm(w) and back size sall be 455±10 mm(W) X 330±10 mm(H) from seat. Overall height shall be = 800±10 mm & overall depth = 565±10 mm.

Sofa Set (3+2): Supplying and placing three plus two seat sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with HR PU foam having density 40Kg/m³ in seat and having density 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam thick having density 32Kg/m³. SS strip shall be provided on front of the arm having length 515mm with cross-section area 14mm X 4mm. The structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall have shiny chrome finish SS leg with height 100mm and 10mm thick. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat height = 430±10 mm, overall width of 3 seater = 1650±10 mm and 2 seater = 1200±10 mm, overall depth = 750±10 mm & overall height = 700±10 mm.

Center Table : Supplying & placing center table with an overall size 1200mm X 600mm X 450mm or square having size 600x600x450. The top shall be made up of 25mm thick Pre-laminated particle board of grade II of IS 12823. The profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The lower shelf shall be made up of 18mm thick Pre-laminated particle board. The under structure shall consist of SS 202 grade shiny chrome finish pipe frame having cross-section area 30mm X 15mm. There shall be shoe provided at the bottom to avoid scratches on the floor.

Mess Seating SS Top: Providing and supplying four seater café table with PP shell seating system. The overall size of the table shall be 1200mm X 1500mm X 750mm. The table shall be supplied in completely knock down condition. The main top of the table shall be made up of SS sheet with an overall size 1200mm X 600mm. The profile of the table top shall be rectangle shape. The top shall be supported on 4mm thick hinges mounted on rounded bent pipe having Dia. 40mm with 1.6mm thick that shall be joint with rectangle beam having cross-section area 60mm X 40mm with 1.6mm thick. The seat shall be made up of one piece injection moulded polypropylene shell mounted on 50mm Dia. round pipe (welded together with rectangle beam) with 1.6mm thick with the assistance of 8mm thick solid HR steel plate. The seat shall be 260mm differ to each other. The complete understructure shall be made up of MS CRCA pipes with 50-60µ thick powder coated. The base shall be covered with plastic caps. The seat size shall be 400±10 mm(W) X 400±10 mm(D) and back size shall be 380±10 mm(W) X 380±10 mm(H), overall height shall be 840±10 mm.

Library Table : Supplying & Placing Conference table in completely knock down conditions with an overall size 1200mm X 1200mm X 750mm that is to be assembled at site. The top shall be made up of 25mm thick pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC. The top shall be supported on MS/CRCA triangular shape pipe frame having cross-section area 53mm X 53mm X 75mm. The understructure shall consist of MS/CRCA triangular shape leg having crosssectional area 53mm X 53mm X 75mm. The metal part shall be powder coated to the thickness of 40-60µ DFT. There shall be plastic shoe provided to avoid scratches on the floor. The table connections have to be made in such a way that no gap should be seen in between.

Library Chair : Providing and supplying mid back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam 50mm thick having density 50kg/m³ with fabric tapestry 0.6mm thick and 235 GSM and the back shall be made of metal bright bar upholstered with breathable mesh tapestry. The backrest of the chair shall be made by keeping the natural curvature of the spine with cushion base lumbar support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be used injection moulded polypropylene loop arm completely joint with seat. For seating durability the chair shall have push back 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm to suit them using the lever under the seat. The pedestal should have five legged injection moulded in 30% glass filled black nylon having pitch circle Dia. 650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black nylon 30% glass filled. The seat size shall be 460±10 mm(W) X 455±10 mm(D) and back size shall be 550±10 mm(H) from seat & overall height = 990±10 mm.

Dining Table With Chair : Supplying & placing dining table with six chairs an overall size 1600mm X 900mm X 750mm. The top of the table shall be made up of 18mm thick teak wood. The top profile shall be in rectangular wooden shape with the edges shall be in chamfer shape. The under structure shall have teak wood having size 75mm X 75mm round shaped legs with melamine polish.There shall be shoe provided at the bottom to avoid scratches on the floor. Dinning Chair. The seat shall be made of 12mm thick plyboard and season/teak wood frame upholstered with high resilience polyurethane foam 40mm thick having density 40kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of season/teak wood malemine polish finish frame. The frame structure shall be supportd by four legs made up of season/teak wood malemanie polish finish of size 50mm X 50mm. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 410±10 mm(D) X 450±10 mm(W) and back size shall be 440±10 mm(W) X 560±10 mm(H) from seat. Overall height shall be = 1000±10 mm.