ADDITION ALTERATION AND SPECIAL REPAIRS TO CERTAIN OTM BUILDING AT ARTY CENTRE HYDERABAD UNDER GE GOLCONDA

Amount

Dismantling of AC sheets / Galvolume sheet / GI Sheet of corrugated or semicorrugated etc. sheets in roof coverings complete all as specified and directed.

Dismantling of Mangalore pattern roofing tiles with ceiling tiles or slate roofing complete all as specified and directed.

Dismantling battens for tiles, shingles etc of any size including tilting fillets n exc 15 cm centre to centre complete all as specified and directed.

Dismantling timber scantlings 40 Sq cm and over in section in any position, unframed work complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.complete all as specified and directed.

Material and labour Preparation of old painted wooden surfaces of any description over 10 cms width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour Preparation of old painted steel surfaces of any description over 10 cms width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Supply and fixing MS Angle sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and drilling holes for existing wooden/steel angle rafter; fixed with angle cleats MS Screw bolts necessary welding to purlins or other connecting plate of Grade Fe 410 -W (Gde- E- 250) quality- A etc. complete all as specified and directed.

Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fixing pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling of boarding, any description fixed in any position with nails complete all as specified and directed.

Supply and fixing powder coated aluminium snap grid Size of grid 605 x 605mm frame work for false ceiling all as specified including aluminium alloy powder coated angle 25x25 x1.50mm at edges and Tee section 35 x 35 x 1.50mm at other than edges placed both ways at a spacing 60cm centre to centre including necessary aluminium alloy powder coated cleats and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to wooden rafters/ steel purlins by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and fixing ceiling board 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium framework, and applying two coats of synthetic enamel white paint over a coat of primer complete all as specified and directed

Demolition of brick masonry, built in cement mortar including all quoins, pillars etc.complete all as specified and directed

Taking down cement plaster on wall of any desdriptions including racking out joints for key scrubbing with water and removing the debrish to outside MD land, etc.complete all as specified and directed

Material and labour for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

Material and labour for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Material and labour for 15 mm thick rendering in two layers, 5mm thick in CM 1:4 mixed with WPI @ 200 ml by weight of cement over a coat of 10mm thick in CM 1:4. on concrete or brick wall surfaces, finished even and smooth without using extra cement (IWPC measured and paid separately) complete all as specified and directed.

Material and labour for rendering 10mm thick in cement mortor 1:6 on Brick wall surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 10mm thick in CM (1:3) as in ceilings, concrete surfaces finished fair and even complete all as specified and directed. Note for item no 18,19 & 20:- only River sand to be used for all plastering works.

Material and labour for preparing newly plastered surfaces and applying 3mm thick (two layers 1.5mm each) birla white wall care putty to fill up the depression and rubbing with sand paper to achieve a levelled and smooth surface and applying two coats of acrylic distember over a coat of primer on walls complete all as specified and directed.

Material and labour for preparing new plastered surfaces of walls and applying Two coats of cement based paint complete all as specified and directed.

Material and labour for preparation of new ceiling surfaces and applying three coat of white wash, complete all as specified and directed.

Material and labour for preparation of old ceiling surfaces and applying one coats of white wash, complete all as specified and directed.

Material and labour for complete removal of existing treatment and applying 3mm thick (two layers 1.5mm each) birla white wall care putty to fill up the depression and rubbing with sand paper to achieve a levelled and smooth surface and applying two coats of acrylic distemper over a coat of primer on surfaces of internal walls complete all as specified and directed.

Material and labour for complete removal of existing treatment and applying two coats of cement base paint on walls surfaces complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description of any position not otherwise specfically provided for as in floor, etc complete all as specified and directed

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc brushing neat cement slurry with 3 kg of cement per Sqm complete all as specified and directed.

Material and labour for 50 mm average thick, PCC 1:2:4 type B0 (using 12.50 mm graded stone aggregate) as in levelling course over the roof slab and providing 10 mm thick cement plaster in CM 1:3, mixed with water proofing compound over the leveling course while the concrete is green, finished fair and even without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

Supply only Liquid for water proofing compound

Material and labour for water proofing treatment with APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified with non woven polyester matt black finished over compatiable primer at 0.3 litre per sqm, torching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with at coat of bitumastic aluminium paint over the membrane. complete all as specified and directed. The over lap joint shall be provided of 100mm in longitudinal direction and 150mm in tranverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage. Note : The work shall be carried out by authorized applicators of manufacturers.

Material and labour for 75mm thick PCC 1:3:6 type C2 (Using 40mm graded granite stone aggregate) as in plinth protection/ hardstanding finishd even and smooth with out using extra cement complete all as specified and directed.

Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Material and labour for Hard core of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and labour for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

Material and labour for chequered rubber moulded cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigment, machine pressed, set jointed and pointed in neat cement slurry in floors including 15 mm thick screed bedding layer in CM 1:6 complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, plinth protection, aprons etc laid, bed-dry and pointed in any mortar,complete all as specified and directed.

Material and labour pre polished Machine cut kota stone slab flooring 20 to 25mm thick over and including 20mm thick screed in CM 1:6 over PCC sub base/RCC slab. laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and labour pre polished machine cut Kota stone slab 20 to 25 mm thick in riser of step, skirting, dado & pillar laid over and including 10 mm thick backing coat in CM 1:3 jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and labour pre polished machine cut Kota stone slab 20 to 25 mm thick kota stone slab single piece to the full width of tread and riser. Tread kota stone shall be provided with bull nosing and 02 nos of 5 mm thick anti skid grooves at one side of tile over 10 mm thick screed in CM 1:3 over cement slurry over RCC slab / waist slab.complete all as specified and directed

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) complete all as specified and directed

Material and labour for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.16 sqm, in floors etc, and cement screed in CM 1:6, 15mm thick and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

Material and labour for glazed coloured ceramic tiles in vetical surfaces of size 450mmx300mmx7mm thick laid over 10mm thick back coat in CM (1:4), set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, complete all as specified and directed.

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for Pre Cast Cement Concrete 1:2:4 type B1 (using 20 mm graded aggregate) as in Cover slab for manholes etc set in cement mortor 1:4 including necessary form work complete all as specified and directed. (Reinforced shall be measured and paid seprately)

Material and labour 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Supply and fix vitreous china wash basin, white, ovel shape size 550 x 400mm, 01 No. fancy type chramium plated piller tap, CP stop cock & 450mm long PVC connection, 01 Nos 32mm waste coupling and pipe, , including cutting Granite slab for placing wash basin nosing edges complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed

Taking down chowkats with shutters (without taking off shutters from the frame not exc 1.5 Sqm each complete all as specified and directed.

Taking down shutters of any description n.exc 1.00 Sqm each complete all as specified and directed.

Supply and fixing Pressed steel frames 125x60 mm for doors with one or more rebates including necessary fixing lugs, holdfsts, MS powder coated butt hinges of 100mm long – 3 Nos. for single shutter, 6 Nos. for double shutter. for door & wire mesh shutters, lock strike plate, etc., complete all as specified and directed.

Material and labour 2nd Class hard wood 35mm Double/Single Flush door shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

Material and labour Second class hard wood 35mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers complete all as specified and directed.

Material and labour Second class hard wood 30mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers. complete all as specified and directed

Material and labour for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows complete all as specified and directed.

Supply and fixed in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed withn wooden beading or with nuts and bolts to existing steel windows/wooden windows complete all as specified and directed.

Supply and fix extruded aluminium alloy handles,150mm fabricated type anodized complete all as specified and directed.

Supply and fix extruded aluminium alloy handles,100mm fabricated type anodized complete all as specified and directed.

Supply and fix aluminium, 150mm anodized, barrel tower bolts extruded section & fixed complete all as specified and directed.

Supply and fix aluminium, 100mm anodized, barrel tower bolts extruded section & fixed complete all as specified and directed.

Supply and fixing 300mm aluminium sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, four on bolts plate & two on staple plate & fixed complete all as specified and directed.

Material and labour for preparation of New or previously untreated wooden Surfaces of any description, not otherwise described, over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply and fixing 150mm Floor door stopper of aluminum alloy body & tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Supply and fix Mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and fix Butt hinges, 75mm medium weight, stainless steel, and fixed complete all as specified and directed.

Supply and fix shutter, hooks & eyes Alluminium, 150mm complete all as specified and directed.

Material and labour Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fix in opening complete all as specified and directed

Material and labour factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside complete all as specified and directed

Supply and Fix 100mm Butt hinges, extruded Aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-22 complete all as specified and directed.

Supply and fixing sheet 4mm thick and glazing with oil putty/ alu beads n.exc. 0.50sq.m. each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and supply and fix sheet glass 4mm thick and glazing with oil putty/ alu beads n.exc 0.50sq.m. each pane complete all as specified and directed.

Material and labour stainless steel 20mm dia curtain rail with including fixing brackets, etc. complete all as specified and directed

Supply and fix Alluminium, 75mm anodized, barrel tower bolts extruded section & fixed complete all as specified and directed

Supply and fix Windows of Double Rebate windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 5 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work. complete all as specified and directed.

Supply and fix in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 ltrs capacity hoisted and fixed in position all as specified including dismantling old tank complete all as specified and directed.

Supply and fix of 20mm Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe & fixed.(Minimum weight 20mm-210gms) complete all as specified and directed.

Taking down 15mm bore steel tubing and connections in any position, complete all as specified and directed.

Taking down 20mm bore steel tubing and connections in any position, complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 for concealed water tubing, etc.& making good, cutting not exc 10 cm grith complete all as specified and directed.

Supplying and fixing of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including provision of special fittings ( Unions, elbow, Tee, Male threaded brass adaptor, Female threaded brass adaptor, Tank adaptor etc), complete all as specified and directed.

Material and labour for 20 mm bore GI Tubing medium grade with all fittings fixed to wall/ ceiling or in floor complete as specified and directed.

Supply and fixing in repair 15mm bore Bib taps, chromium plated cast copper alloy but fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fixing in repairs 15 mm dia fancy type stop valves/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fixing in repair two way Bib tap 15mm bore, chromium plated, fancy type complete all as specified and directed.

Supply and fixing PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

Supply and fixing PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement in repairs complete all as specified and directed.

Supply and fixing in repairs, vitreous china Squatting pan Orissa pattern of size 580mx440mm with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete all as specified and directed

Supply and fixing in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete all as specified and directed.

Supply and fixing in repair hand shower( health faucet ) with 1.0 m long easy flex tube in chrome finish and wall hock Make-Jaquar ALD-CHR-563 or equvelent as specified in CA complete all as specified and directed.

Supply and fixing in repair vitreous china bowl urinal flat back size of 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern & flush pipe) but exncluding waste pipe, complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement complete all as specified and directed.

Supply and fixing in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed.

Supply and fixing PVC( SWR ) pipes 110mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall including taking down of existing pipe complete all as specified and directed.

Supply and fixing PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down of existing pipe complete all as specified and directed.

Supply and fixing PVC( SWR ) pipes 75mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to walls including taking down of existing pipecomplete all as specified and directed.

Supply and fixing PVC( SWR ) pipes 75mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to walls including taking down of existing pipe complete all as specified and directed.

Supply and fix in repair PVC (SWR) junction single (single T) equal or unequal with access door of bore 75mm complete all as specified and directed.

Supply and fix in repair PVC (SWR) bends any radius 110mm bore complete all as specified and directed.

Supply and fix in repair PVC (SWR) bends any radius 75mm bore complete all as specified and directed.

M&L Plain Cement concrete 1:4:8 Type D2 (40 mm graded aggregate)in foundations, filling and mass concrete complete all as specified and directed

Excavating in trenches n exc. 1.5m Wide and n exc. 1.5m in depth, for foundation, etc. or for shafts, wells cesspits, manholes pier holes, etc. n exc. 10 sqm on plan and getting out in any type of soil complete all specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and comprising of the following

Removal of excavated soil n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and directed.

M&L for Point wiring complete with 1.5 sq mm single core PVC insulated FRLSH unsheathed cable 1100 volts grade with multi stranded copper conductor confirming to IS-694 1990 wih ISI marked (for phase, neutral and earth) in and including non-metalic rigid PVC conduit medium grade with ISI Mark of minimum 20mm dia and all conduit accessories concealed including cutting/ chases in wall/ceiling/fixed to roof/truss/columns etc and including factory made branded make embossed galvanised steel pressed terminal boxes alongwith suitable size modular cover plates with frames for fixing modular switches and sockets, fan regulators etc. of suiable size modules and the earth wire to be connected to common earth dolly complete all as specified and directed for the following:-

One light / fan/ Exhaust Fan point controlled by one switch

One light point contrlled by Two 2-Way switches

One fan point controlled by one switch and one regulator

One exhaust fan controlled by one switch

One 3 pin socket out let 5 Amps on independent board

One 3 pin socket out let 5 A on same board

M&L for Point wiring complete all a specified with 1100 Volts grade 4.0 sq mm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS 694 1990 with ISI marked (for phase, neutral and earth)in and including non-metallic rigid PVC conduit medium grade ISI Mark of minimum size 20mm dia all accessories concealed in wall/ceiling/fixed to roof/truss/columns etc and including factory made branded make embossed galvanised steel pressed terminal boxes for fixing modular sockets of suitable size modules and the earth wire to be connected to common earty dolly all as specified and as directed.all as specified and as directed for One three pin modular switch socket 16 amps outlet on independent board complete all as specified and directed.

Supply and Fix Modular switch 1 way 6A,1 module complete all as specified and directed.

Supply and Fix Modular switch 2way 6A,1 module complete all as specified and directed.

Supply and fix modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix Modular switch 1 way 16A, 1 module complete all as specified and directed.

Supply and fixing Modular Type shuttered Socket outlet,3 pin 6/16 Amps, 230 volts Two modules with ISI mark complete all as specified and directed.

Supply and fixing in replacement of ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals complete all as specified and as directed.

Supply and fixing angle holder PVC / Polycarbonate type complete all as specified and directed.

Supply and fix LED reading lamp 2 module type suitable for single phase AC supply fixed on wall with the screws complete all as specified and as directed. ( Legrand Cat no. 679316 or equivalent make as specified in CA)

Supply and fix modular stepped type electronic fan regulator suitable for BLDC ceiling fan (2 moudle), 220 volts 100 watt complete all as specified and directed.

Supply and fixing in replacement LED lights fitting 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing in replacement LED lights fitting 1x10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing LED building Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including connecting the fitting and connector with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing Mild steel down rod suitable for Hanging ceiling fans of lengh 3 metre long with necessary holes drilled for fixing check nuts & split pin complete all as specified and directed.

Supply and fixing hanging hook suitable for suspending fans in the ceiling all as specified and directed.

Supply and fixing TPN DB 4 way made out of CRCA sheet housing duly powder coated having degree of protection IP 43 double door type 415 volts with 200 Amps rated copper busbar complete all as specified and directed .

Supply and fixing TPN DB 6 way made out of CRCA sheet housing duly powder coated having degree of protection IP 43 double door type 415 volts with 200 Amps rated copper busbar complete all as specified and directed .

Supply and fixingin replacement sheet metal enclosure MCB DB SPN 4 way made out of CRCA sheet housing duly powder coated having degree of protection IP 43 double door type 240 volts with 200 Amps rated copper busbar with locking system complete all as specified and directed .

Supply and fixing in replacement sheet metal enclosure MCB DB SPN 8 way made out of CRCA sheet housing duly powder coated, 240 volts double door with 200 Amps rated copper busbar with locking system complete all as specified and directed .

Supply and fixing in replacement sheet metal enclosure MCB DB SPN 12 way made out of CRCA sheet housing duly powder coated, 240 volts double door with 200 Amps rated copper busbar with locking system complete all as specified and as directed

Supply and fixing in replacement of RCBO 2-Pole 230 Volts 30mA 40Amps complete all as specified and directed

Supply and fixing in replacement of RCBO 4-Pole 415 Volts 30mA 63Amps complete all as specified and directed

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP in the MCB DB complete with connection testing and commissioning complete all as specified and directed

Disconnecting the power supply from the mains taking down the sub main wiring 2/3/5 core and of sizes up to 10 sq mm Aluminum/copper conductor complete all as specified and as directed.

M & L Submain wiring with 2 runs of single core 6 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 6 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board complete all as specified and as directed. Note : three runs of cable and one run of conduit shall be measured as one unit.

Supply and fix 1100volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular for service connections standard conductor 16sqmm complete all as specified and as directed

Disconnection and removing the existing unserviceable earthing and M & L of Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom with funnel and wire mesh, common salt and charcoal filling complete including testing on complete all as specified and as directed

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed

Taking down fan, sealing cable end,dismantling blades and removing& deposit fan and blades to store & re fixing after cleaning/painting in the same location as directed. complete all as specified and directed.

M & L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, without remote and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

M&Lfor fine seived excavated dry Soil (riddled earth) laid to the required width of trench at botom and top of cable as cushioning complete all as specified and directed.

Supplying and laying Bricks common burnt clay building bricks, sub-class ‘B’ designation 75 complete all as specified and directed

Supply & Laying GI tubing light grade of size 80 mm with necessary fittings as in cable protection laid in trenches/road/fixed on wall / floor including necessary clamps bolts and nuts complete all as specified and directed.

Supply & Laying GI tubing light grade of size 50 mm with necessary fittings as in cable protection laid in trenches/road/fixed on wall / floor including necessary clamps bolts and nuts complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, Screened PVC bedded galvanised steel strip or wire armoured electric power cables (Heavy Duty) with stranded aluminium conductor, 1100 volts (1.1 KV) grade of the following sizes complete all as specified and directed.

70 sqmm 3.5 core

50 sqmm 3.5 core

35 sqmm 3.5 core

25 Sqmm 4 core

Supply, Installation, test and Commissioning factory fabricated, out door type, LT DISTRIBUTION PANEL BOX made out of 3.15 mm thick CRCA Sheet with projected Globe roof for rain water protection Dust and Vermin Proof, Double door with both side opening including Neoprene Rubber Gasket,, suitable for 440 Volt 3 Phase 4 Wire System ,including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeded with 50X50X6mm Mild Steel Angle Iron Frame and 600 mm above the Normal Ground Level complete with internal connection with suitable size of cable ,cable lugs,and cable glands on the existing PCC foundation and Testing after Installation complete all as specified and comprising of the following :–

M&L for Earthing with galvanised steel earth plate electrode 60 cm x 60 cm x6 mm thick, buried directly in ground (earth pit not less than 2.25 metre below normal ground level) with top edge of earth plate not less than 1.5 metre below normal ground level connected to main earth lead GI strip 32 mmx6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 of MES Schedule Part I 1991, GI earth lead protected by GI pipe 40 mm dia light grade, providing and connected to earth test point with & including necessary excavation & earth works in any type of soil, returning filling, disposal of surplus soil to 50 metre, filing with mixture of charcoal and common salt up to 15 cm above top edge of earth plate, pit of PCC 1:2:4 with precast cover of RCC 1:2:4, watering arrangement with GI funnel, 20 mm dia GI light grade watering pipe, earth test point terminal block, commissioning & testing omplete all as specified and comprising of the following. complet all as specified and directed.

Supply, install, test and commission of 2TR capacity wall mounted split AC 5 star rating (ISEER rating not less than 5.2) inverter type fitted with variable speed inverter compressor operation on 230V + 10% 50 Hz single phase AC supply with evaporator and condencing unit made of copper tubes with aluminium fins cordless remote control, copper piping for both suction and discharge of suitable length with insulation for piping, power and control cabling as per site requirement MS outdoor stand duely painted compricing of following complete as per requirement:- a) 100% copper condencer coil with anti corrosion blue coating insulated copper pipe line for liquid and suction line as per site requirement. b) Flexible copper cable between indoor, stabilizer and outdoor unit of suitable size as per manufacturers recommendations/site requirements c) Drain pipe PVC rigid conduit with suitable length concealed in wall d) Suitable size of insulation for covering of refrigent lines e) Refrigerant gas should be environmental friendly and zero ozone depletion potential. Note:- Cost for the items mentioned at (a) to (e) above are deemed to be included in the quoted rate of this item.

Supply and fix power unit for AC with one 25A socket ( incl 3 pin plug top 25 Amps) one electronic starter 25 Amps and one MCB SPN 25Amps "C" Curvw all accessories shall be fixed in one six module metal GI box, Frame and cover plate and electrically connecting up complete all as specified and as directed.

M & L Submain wiring with 2 runs of single core 4sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 4 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board complete all as specified and as directed.

S&F electric water heater,storage type ABS body with steel inner tank with interior enamel coating as per OEM and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

Supply and Fix Bib taps, chromium plated alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15mm dia complet all as specified and directed.

Supply & fix 3-layer PP-R Polypropylene (random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittingsfixed complete to walls, ceilings or in floors etc.of size 15mm dia. complete all as specified and directed.

Supply and fix Stop valves of size 15 mm dia, cast copper alloy,screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated complete all as specified and directed.

Supply and fix sheet metal enclosure with socket plug top and MCB single pole and neutral enclosure with a two pin and earth plug complete with one double pole MCB of 20 Amp capacity.complete all as specified and directed.

Supply and fix assembly and erection of GI sheet with C & SS rectangular/square duct made out of 'L' shaped hollow profile, duly factory boxed, incl all accessories such as Corner, Cleat, Carriage bolt,Gasket and appropriate sealant on longitudinal joints etc complete of size 20 Gauge complete all as specified and directed.

Supply , assembly and erection of GI sheet with C & SS rectangular/square duct made out of 'L' shaped hollow profile, duly factory boxed, incl all accessories such as Corner, Cleat, Carriage bolt,Gasket and appropriate sealant on longitudinal joints etc complete of size 24 Gauge complete all as specified and directed.

M & L for Duct support for all types of pipes/ Ducts including hangars / fastners / elbows/ supports / tees for the supply and return air duct for chimney complete all as specified and directed.

M & L for MS -CRC 18 gauge square perforated double deflection aluminum suction grills of size 12'' x 6 '' for fresh air intake by chimney complete all as specified and directed.

M & L for 0.8 mm thick Stainless Steel 304 Hood with SS oil filters of size 7feet x 3 feet x 20 inches suitably mounted and connected to the ducts of the chimney complete all as specified and directed.

M & L for 0.8 mm thick Stainless Steel 304 Hood with SS oil filters of size 5eet x 3 feet x 20 inches suitably mounted and connected to the ducts of the chimney complete all as specified and directed.

M & L for 0.8 mm thick Stainless Steel 304 Hood with SS oil filters of size 3feet x 3 feet x 20 inches suitably mounted and connected to the ducts of the chimney complete all as specified and directed.

M & L for 3HP, 3 -Phase centrifugal blower with driving shaft for belt driven pressure blower comprising of inlet air filter, outlet air filter, belt guard, outlet silencer, coupling guard, vibration isolators abrasion resistant, high temperaturee welded steel wheel suitable to operte at low static pressure and high air flow not less than 3000 CFM at 1440RPM mounted on the exhaust duct including necessary wiring upto DOL starter of suitable capacity complete all as specified and directed.

M & L for 1HP, 3 -Phase centrifugal blower with driving shaft for belt driven pressure blower comprising of inlet air filter, outlet air filter, belt guard, outlet silencer, coupling gaurd, vibration isolators abrasion resistant, high temperaturee welded steel wheel suitable to operte at low static pressure and high air flow not less than 3000 CFM at 1440RPM mounted on the exhaust duct including necessary wiring upto DOL starter of suitable capacity complete all as specified and directed.

RAJENDRA CONSTRUCTION (BID ID -3400312)

SRICO PROJECTS PVT LTD (BID ID -3406998)

STANDARD AGENCIES (BID ID -3407852)

M/s Amit Associates (BID ID -3400082)

Sukhdevraj Sharma Engineers & Contractors Pvt Ltd (BID ID -3400144)

S.R.M.K Enterprises (BID ID -3408372)