REPAIR OF CEILING, JOINERY, TILING, PCC, ROOF SHEET AND ALLIED WORKS AT CENTRAL AMENITY, NOI, UTILITY CENTER AND CERTAIN SMALL UNIT IN THE AOR OF AGE B/R-I UNDER GE NARANGI

Amount

Dismantling plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern roof covering complete all as specified and directed.

Material and labour Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and directed.

Material and labour Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick (Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specified complete all as specified and directed. Note: To be executed for provision of ridges and hips.

Material and labourfor for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600mmx600 mm with main runner 32 mm x 24 mm and wall angle 32mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in a grid of GI system duly suspended with 3mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid including dismantling complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed trusses etc complete all as specified.

Material and labour for structural steel work with rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-290 (Gde E-165) quality A complete all as specified and directed.

Demolition of stone slabs and tiles laid dry and dry or pointed of any description or thickness infloors, aprons etc.

Material and labour for 60mm thick M-35 grade cement concrete coloured interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion complete all as specified and directed.

Material and labour for chequered cement concrete coloured tile 30cm X 30cm X 25 mm thick with grey cement and pigment set jointed and pointed in neat cement siurry over screed bed or bedding layer 15 mm thick in CM (1:6) in floor complete all as specified and directed.

Material and labour for heavy duty parking tiles size 300mm X 300 mm X 10 mm thick /400 mm X 400 mm X 10 mm thick white cement and pigments of approved maked jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6) complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 20mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.

Material and labour for kota stone slab 18 to 20 mm thick in riser of steps, skirting, dado and pillar laid over rendering 10mm thick in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishing complete all as specified and as directed.

Material and labour for granite 20mm thick (of any type) work (table rubbed and polilshed) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in wite cment (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for granite 20mm thick (of any type) work (table rubbed and polilshed)for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing in wite cment (1:2) using marble dust with admixture of pigment to match with shade of granite over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for 75 mm thick, PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide and 30 mm deep at every 2.4 mtrs interval filled with sealing compound grade 'A' etc complete all as specified and as direted.

Material and labour for 100mm thick cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate ) as in flooring, hardstanding complete all as specified and directed.

Material and labour for 75mm thick cement concrete 1:2:4 type B-1( using 20mm graded stone aggregate) as in flooring, sub base of tile complete all as specified and directed.

Material and labour for 25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in floor finished rough to receive tiles complete all as specified and as directed.

Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

Material and labour for non skid, ceramic “coloured” tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor, shelves etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.

Material and labour for non skid, ceramic “coloured” tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor, shelves etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles 7 to 8mm thick area of tile exceeding 0.11 and n.exc 0.18 Sqm in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.

Material and labour for non skid, ceramic “coloured” tiles 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.38 Sqm in floor, shelves etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.

Material and labour for non skid, ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 and n.exc 0.38 sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Material and labour for vitrified ceramic coloured tiles of 10 mm thick area of each tile exceeding 0.18 and n.exc 0.36 Sqm in floor, shelves etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.

Material and labour for vitrified ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 and n.exc 0.38sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Material and labour for coloured/printed glazed ceramic tiles 7mm thick not exc 0.15 Sqm in area in vertical surfaces i.e. dado, skirting, etc., set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Supply and fix steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Supply and fix steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Supply and fix in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia PVC waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed.

Supply and fix pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.

Supply and fix in repair pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.

Supply and fix in repair 15mm bore tall body pillar taps cast copper alloy fusion range, chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. make: Parryware Model No WPT7264A1 or equivalent model of hindware /Jaquar

Supply and fix in repair vitreous china table top wash hand basin, white/coloured table top size 460X315X135 mm including necessary CP waste coupling suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe) complete all as specified and directed.make: Parry ware CAT No WPC895V46 or equivalent of jaquar/hindware

Supply and fix in repair vitreous china bowl urinal flat back, size of 380X405X590 mm white (minimum), along with all fittings like spreader, grating, connection pipe and union for discharge pipe complete all as specified. make:Parryware cat no C0583 or equivalent of jaquar /hindware

Supply and fix in repair floor mounted trap EWC rimless bowl with side flush cistern for coupled WC, slim soft close seat cover, hinge signal flush cistern water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set etc complete all as specified and as directed.Make : Parryware opal Rimless Single piece WC cat no WPC899F46 equivalent of Jaquar

Supply and fix in repair CP stop valve/angle valve 15 mm bore, fancy type cromimum plated with long shank and cup (concealed type), high pressure crutch or butter fly handle screwed both ends screwed for iron pipe or for unions complete all as specified and directed.

Supply and fix in repair rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places with fittings and refixing of inlet, outlet and overflow pipe etc, complete all as specified and as directed.

Supply and fix in repair rotational moulded,multilayer HDPE water storage tank of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete and refixing of inlet, outlet and overflow pipe etc, complete all as specified and as directed.

Supply and fix in repair PVC waste pipe 32mm dia, 60 cm long for WHB/urinal with cup, complete all as specified and as directed.

Supply and fix in repair PVC connection pipe 15 mm size with P.T.M.T nuts of length 600mm complete all as specified and as directed.

Supply and fix ball valves 20mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specified and as directed.

Supply and fix in repairs ball valves 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specified and as directed.

Supply and fix in repair PVC valve, symphonic action type, flushing cistern 10 liters capacity low level white with inlet ,ball valve ,float and handle including brocket complete all as specified and as directed.

Supply and fix in repair for grating doom 100 mm dia of PTMT.(Minimum weight 25gms) complete all as specified and as directed.

Supply and fix in repair bib taps with wall flange 15mm bore, fancy type, quarter/half turn, brass chromium plated, long body with capstan head and cup screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed.

Demolition and breaking up drain waste pipes (SGSW, AC or RCC, CI) of internal dia 75/110 mm including all fittings, set in cement mortar in any position complete all as specified and directed.

Supply and fix PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 110 mm bore complete all as specified and directed.

Supply and fix PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 75 mm bore complete all as specified and directed.

Supply and fix PVC (SWR) bends with access door any radius, 75 mm bore complete all as specified and as directed.

Supply and fix PVC (SWR) bends with access door any radius, 110 mm bore complete all as specified and as directed.

Supply and fix in repair vitreous china urinal, half stall type (flat back), of size 635x395x420mm, white, with grating and union for discharge pipe (excluding flushing cistern) including 32mm dia PTMT coupling and waste pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, complete all as specified and directed.

Supply and fix in repair vitreous china urinal, bowl type, of size 465X355X265 mm, white, with grating and union for discharge pipe (excluding flushing cistern) including 32mm dia PTMT coupling and waste pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, complete all as specified and directed.

Supply and fix in repair urinal spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and as directed.

Supply and fix, in repair vitreous china wash down water closet of "Orissa" pattern size 580 x 440 mm white with integral foot rests including removing filled lean concrete from sunken portion and putting of lean concrete after treatment of sunken slab, connection to trap and to flushing pipe etc complete and making good to floor complete all as specified and directed.

Supply and fix in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom and cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.

Supply and fix in repair plastic water closet seat cover, white, closed pattern with flat bottom and cover and aluminium anodised hinging device and fixed WC pan complete all as specified and directed.

Demolition of brick work including all quains and arches pillars etc built in cement mortar complete all as specified and directed.

Material and labour for brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:4 and complete all as specified and directed.

Material and labour for brick work but except bricks using class 'B' old sized bricks straight or curved on plan exc 6m mean radius and built in CM 1:4 etc complete all as specified and directed.(Note: Old serviceable bricks as obtained from item against demolition)

Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Material and labour for 10mm thick rendering on other than fair faces of brick wall in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed.

Material and labour for rendering 15mm thick external in CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using exta cement with using WPC @3% by the wt of cement complete all as specified and directed.

Material and labour for 5mm thick rendering on fair faces of brick or concrete ceiling surface in CM 1:3 finished even and smooth with out using extra cement complete all as specified and directed.

Material and labour preparing new plastered surfaces of walls by applying two coats of weather coat exterior paint over a coat of primer over a coat of 2mm thick exterior putty with approved tint as per manufacturer's instructions, complete all as specified .

Material and labour for preparing of newly plastered wall surface and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Material and labour for preparation of new plastered surfaces, applying white cement based wall care putty on the surfaces with minimum 2 mm uniform thickness making surface absolutely smooth by grinding with sand paper and applying two coats of acrylic distemper over a coat chalk whiting of approved shade on old surface of wall complete all as specified and directed.

Material and labour for preparing of newly plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

Material and labour for preparing of newly plastered wall surface and applying three coats of white wash complete all as specified and directed.

Material and labour for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on old surface of wall complete all as specified and directed.

Material and labour for preparation of old distempered surface of wall including cornices etc. by washing, rubbing down,scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and stopping of distempered surfaces and applying one coat of acrylic distemper of approved shade on surface of wall complete all as specified and directed.

Complete removal of existing treatment on wall surfaces by scrapping, washing and rubbing down including applying a layer 1 mm thick wall care (putty) for making the surface even and smooth etc complete all as specified and directed.

Material and labour for preparing old plastered decorated surfaces of wall and applying two coat of exterior emulsion paint (Apex/Weather coat) white or tinted as approved complete all as specified and directed.

Material and labour for preparation of old painted surface of wood and wood based materials by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any discription, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.

Material and labour for preparation of old painted surface of steel and iron by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any discription, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.

Material and labour for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of cement base paint white or tinted of approved shade complete all as specified and directed.

Taking down door chowkhat with shutter area n-exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of wooden or aluminium door of any description n. exc 1 sqm each complete all as specified and directed.

Taking down shutters of wooden or aluminium door any description area exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

Refixing wooden or aluminium door shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware, glass etc as required and renewal of unserviceable screws complete all as specified and directed.

Supply and fix for 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

Supply and fix pressed steel frames for doors of size 125mmx60mmx1.25mm with double rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

Supply and fix pressed steel frames for doors of size 105mmx60mmx1.25mm with single rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

Material and labour for repair to aluminium door or window not exceeding 3.0 Sqm including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle, locking arrangement, pintle hings all as directed

Material and labour for PCC 1:3:6 type C-0 (using 12.5 mm graded stone aggegate ) as in filling of hollow portion of pressed steel frames complete all as specified and as directed.

Supply and fix factory made 30 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround complete all as specified and as directed.

Material and labour for PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in bed blocks for hold fast,coping errection of posts etc complete all as specified and as directed.

Material and labour mild steel work as in bands, straps, supports or stays for rain water, ventilating pipes including bolts, if required, hooks (stay) heavy for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply and fix 2nd class hardwood factory made door, 35 mm thick, glazed and skeleton shutters, open rebated and prepated to receive glass gauze etc (with sash bars) edges of framing plain, chamfered or rounded materials and revated sash bars any number , edges of framing plain chemfered or rounded fitted with cut and mitred beads for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (a) complete all as specified and as directed.

Supply and fix for 2nd class hardwood glazed and skeleton window shutter 30mm thick, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, to receive glass, gauze, etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (b) complete all as specified & directed.

Supply and fix framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290, Gde-E-165 completed all as specified and directed.

Supply and fix box type steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete including glazing bar, dovetailed or welded complete all as specified and directed

Supply and fix steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed

Supply and fix factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed

Supply and fix Powder coated three track aluminuum sliding window with approved make of following extruded section of anodised glazed shutter as per standard Engineering paracitices including all other accessories complete including 4.0mm thick tinted glass panes, rubber beading, mosquitio proffing, locking system etc, complete all as specified and as directed (refer Jindal Cat M-2014) aluminium section 'A' series (i) Shutter bottom & top - 37.50 x 15 x 1.3 mm thick (20690) (ii) Shutter interlock - 37.5 x 23 x 1.3mm thick (10689) (iii) Shutter side (Handle) - 37.5 x 23 x 1.3mm thick (20689) (iv) Frame bottom - 75 x 26 x 1 mm thick (20671) (v) Frame top and sides - 75 x 26 x 1mm thick (20672)

Material and labour Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings complete all as specified and directed

Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular Material and labour sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and complete all as specified and directed

Supply and fix 300mm long aluminium sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and directed

Supply and fix 100mm long aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge, pin anodized complete all as specified and directed

Supply and fix aluminium alloy handles 150 mm long fabricated type complete all as specified and directed.

Supply and fix 100mm long aluminium alloy handle cast type anodized. complete all as specified and directed

Supply and fix aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified and directed

Supply and fix 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed

Supply and fix in repair 300mm long aluminium alloy anodised sliding door bolts , with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium ally complete all as specified and directed

Supply and fix in repair aluminium butt hinges cold rolled meium weight of size 100mm etc complete all as specified and directed

Supply and fix in repair aluminium alloy handles 150 mm long fabricated type complete all as specified and directed

Supply and fix in repair aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified and directed

Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

Supply and fix in repairs aluminium (Die cast) body Door closer hydraulically regulated,designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

Supply and fix in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stainless steel cover fixed to aluminium doors complete all as specified and directed.

Supply and fix in repair aluminium Lock,4 Lever,100mm long fixed to aluminum doors complete all as specified and directed Make Godrej/Link

Supply and fix in repair floor door stopper overall length of cover plate 150 mm of aluminium alloy body and tongue, anodised,with hard drawn steel spring complete all as specified and directed.

Supply and fix in repair solid PVC wall lining/panelling consisting of 5mm plain colour PVC sheet including solvent cement and fixing at site on PVC frame and necessary beading as directed complete all as specified

Supply and fix 5mm thick PVC sheet fillet 35 mm for wall panelling inclusive of fixing on wall to make PVC frame complete all as specified and directed

Supply and fix in repairs 20 mm dia stainless steel tubular curtains rod with brackets ,Knobs/roller required for fitting etc complete all as specified and directed.

Material and labour for prelaminated particle board BWA type 12 mm thick, interior grade, prelaminated both side for door/partition, with decorative choice lamination fixed with necewwary fittings, gusket, angle clearts, screw etc complete all as specified and directed.

Material and labour for preparation and applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc complete all as specified and directed.

Supply and fix in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from Metal or wood Frame including punching or drilling out old Glazing Pins/Spring Clips, complete all as specified and as directed.

Material and labour for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified and directed.

Material and labour for 4.8mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified and directed.

Material and labour for 4mm thick sheet glass figured glass, pin head type and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified and directed.

Supply and fix 12mm thick toughened glass door (both side opened) fixed with steel connectors, top and bottom pivots, stoppers and other fixtures required to fix the door incl all type of locking arrangement, brass handles fancy type 300mm long hole to hole two nos complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and getting out in soft/loose soil, complete all as specified and as directed.

Material and labour plain cement concrete 1:2:4 type B-2 (40mm graded stone aggregate) in foundations, filling and mass concrete, foundation of pole etc. including use and waste of formwork as required/ordered at site(s), complete all as specified and as directed.

Supply and fix mild steel channel,angle,plate or tee section cut to length including welding and bending angles as necessary as specified in shape and fabricated Fe-290 (Gde E-165) complete all as specified and as directed.

Supply and fix mild steel flat iron 40x6 mm as in posts as in fillets for securing wire mesh etc. including all necessary drilling, bolting or riveting, etc and smilar work conforming to Fe 290(Gde E-165) complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paints over a coat of primer to surfaces of any description exc 10 cm width or girth complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paints over a coat of primer to surfaces of any description n exc 10 cm width or girth complete all as specified and as directed.

Fixing only chain link fencing and including line wire, any mesh, size and type to any type of standards, rails, straining bolts, etc. Including provision binding wire complete all specified and as directed.

Supply only chain link MS galvanized fencing of mesh size 75mm X 75mm X 3.15 mm dia of wire conforming to IS 2721 and complete all as specified complete all as specified and as directed.

Material and labour for round bar 10mm dia and over conforming to FE 290 (Gde-e-165) cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and bindingwith the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips cut to length bend to shape complete all as specified and as directed.

Supply and fix for 11 to 15 mm dia mild steel, screw bold (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nuts n exc 5cm long complete all as specified and as directed.

Supply and fix in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).

Material and labour for normal water proofing treatment on roof slab consisting with following operations:- (i) Existing surface shall be cleaned of all dust, fungus, moss and other foreign material etc by using wir brush & dusting, plaster in CM 1:3, 15 mm thick and Apply a layer of bituminous primer conforming to IS 3384 @ 0.4 Lit/m2 on the surface. Laying 3mm thick APP membrane habing non-woven polyester matt at core and under surface coated with plastic polythene film. Laying shall be done using butane torch maintaining 100mm ie overlap & 150mm end overlap, sealling all overlaps complete including treatment at all junctions & corners. The membrane shal be tucked into groove on vertical plane and groove sealed with cement mortar. The treatment shall be provided upto 200mm height above finished floor (Note- The membrane shall have tensile strength of 700N/5cm in longitudinal direction and 450N/5cm in transverse direction at 23 degree celcius, Flow resistance>120 degree celcius, dimensional stability, < 0.5% when tested as per ASTM D 5147. The laying of the membrane shall be done through authorized applicator of the manufacturers.

Material and labour for preparation of new or previously untreated surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of aluminium paint, complete all as specified and directed.

VENUS TRADING CORPORATION (BID ID -3338510)

M/S P&R CONSTRUCTIONS (BID ID -3340161)