NIT No. 11, Item No. 11 (2023-24)

Providing of ceiling lights/panel light of fixture size (595x595x65)mm for 2x2 flat, 36/40 watt LED technology. Make: Havells /Bajaj/Crompton/ DJB approve make

Providing of exhaust fan of size 300 mm, 1440 R.P.M of single phase 230 Volt., Make: Havells /Bajaj/Crompton/ DJB approve make

Providing of High speed Ceiling fan 1200mm sweep., Make: orient/Havells /Bajaj/Crompton// DJB approve make

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C, DSR-22, Item code - 1.10.3

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. DSR-22, Item code - 1.12

Wiring for circuit/ sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required, 2 X 2.5 sq. mm +1 X 2.5 sq. mm earth wire. DSR-22, Item code - 1.14.2

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required., DSR-22, Item No.- 1.31

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. DSR-22 Item code - 1.32

Supplying and fixing two Module stepped type electronic Fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. DSR-22 Item code - 1.25

Supplying and fixing 3 Pin, 5 A ceiling rose on The existing junction box/ wooden block including connections etc. as required. DSR-22 Item code - 1.33

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. DSR-22 Item code - 1.26

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. DSR-22, Item code-1.41

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. DSR-22, Item code-1.50.1

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core, cable etc. as required. DSR-22, Item code-1.44

Supplying and fixing following way, single pole and neutral, sheet steel MCB distribution board, 240 V, on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator).16 way Doule Door. DSR-22, Item code -2.3.4

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required., Single pole. DSR-22, Item code - 2.10.1

Supplying & Fixing 5 amp. to 32 amp. rating 240/415 V, volt miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required, Double pole. DSR-22, Item code -2.10.3

ANKIT SINGH TARAR

AARADHYA CONSTRUCTION