WBPWDTE/EE/BED/NIQ_85/Q of 2025-26

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copperwire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16SWG) switch board cum JB on wall complete with 2no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. 12 Mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish On Board

Supplying and fixing PVC Rigid Conduit 'FR' [PrecisionMake] on wall, ceiling with saddles and other accessories as required and mending good damages to building works 20mm size

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire(Make:-Finolex/RR Kabel/ Havells/Polycab) of the following sizes in the 19mm/25mm prelaid polythene pipe/PVC rigid conduit as per GS. 3 x (1.5 sqmm) (for separate power plug)

2x(2.5 sqmm)+1x(1.5 sqmm) (for computer board & power socket)

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC [HTPN DB to 2+12W SPN DB]

S & F solderless Copper socket by crimping of Copper wires. a)1.5 sq mm

b) 2.5 sq mm

c) 6 sq mm

d) 10 sq mm

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works incl. supply & fixing bakelite/perspex top cover by Brass screws as per GS. 175 x 100 x 65

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment as per direction of EIC. 6 Way ( Up to 160 A ) Make - L&T Enclosure (LTVD06MGN) or equivalent make of Legrand/ABB/Seimens as directed by EIC.

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA in existing Vertical DBs including necessary connection as per GS [ Make - Legrand / Schneider/L&T/Siemens/ABB) as per direction of EIC] 160A

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall as per GS.( Make - Legrand/ Schneider/L&T/Siemens) as per direction of EIC. 4 Way Make - Legrand, Enclosure (607715)/Schneider, Enclosure-(A9HTND04)/ Crabtree, Enclosure- DCDKTHODCW04)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS. 2+12 Way Crabtree Enclosure (DCDKSHODCW12) / Seimens Enclosure (8GB32102RC12) / ABB Enclosure (SCHM10) or equivalent model of Legrand] as per direction of EIC.

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand/ Schneider/Siemens/ L&T) as per direction of EIC. ] 40 A DP

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [Make-Legrand/ Schneider/Siemens/L&T/ ABB) as per direction of EIC. ] 6-32 SP

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50mm dia disc of MS sheet (20SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) as per direction of EIC. 19mm dia 3mm thick Polythene Pipe

Supplying and Delivery of 2.5mm Copper made 3 to 6 Splitter Heavy Duty Terminal Block Wire Connector.

Supply of 2/3/3.5/4 Core XLPE Insulated & Sheathed Un-armoured Copper Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make: MESCAB/ Gloster/KEI/Polycab/ Havells] 3 Core 2.5 Sq. mm [ For Connecting Indoor Recessed Light through terminal block]

Supply of 2/3/3.5/4 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make: Gloster/KEI/Polycab/ Havells] 4 Core 10 Sq. Mm

4 Core 95 Sq. mm

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sq mm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.

bove 35 sqmm to 95 sqmm at an average depth of 100 mm in floor/pavement/wall etc.

Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable (2/4 / 3.5)Core as per GS. 4 Core 10 Sq. mm

4 Core 95 Sq. mm

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 6 Module

Supplying & Fixing modular type socket /socket (Legrand-Model Arteor/Myrius or equivalent model of Crabtree/Equivalent make as per direction of E.I.C), in exsisting Modular board incl. connections. 6 A 5-pin modular type 5 pin socket

6 A modular type switch

Supply & Fixing 240 V, 1 nos. 16A & 3 nos. 6 A, 3 pin Modular type plug socket with 1 nos. 16A & 3 nos. 6 A Modular type switch (Brand approvedby EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy.connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply and delivery of single/twin Industrial LED Batten luminaries incl. Supply of 1 no./2nos. 18W LED Tube Twin Fittings (make- Philips, Cat No. TMC-502 2xT-LED 22W or equivalent model of CG / Bajaj / Wipro/Crompton) incl. 2 no. 18W Master LED Tube 2100 lm 865 T8 (Pc)

Single Fittings (make- Philips, Cat No. TMC-502 1xT-LED 22W or equivalent model of CG / Bajaj / Wipro/Crompton) incl. 1 no. 18W Master LED Tube 2100 lm 865 T8 (Pc)

S & F of 36W 600mm x 600mm (2x2) recess mounted LED light fittings with CRCA powder coated housing high efficency PMMA diffuser complete with electronic driver after cutting false ceiling, Incl. connections as per direction of EIC.(make- Crompton Pollux LCTLRP-36-FO-CDL or equivalent model of Philips/ Bajaj / Wipro)

Fixing only single/twin LED batten light fitting suspended from the ceiling fixed with “L” type MS clamp for RC ceiling / MS pipe as per GS direction of EIC

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply of ceiling fans with burst-proof S3 Capacitor & safety wire & complete with all accessories without regulator. (Make:- Compton Greaves High Speed plus/Orient summer cool/ Usha Striker) as per direction of E.I.C 1200 mm Sweep

1400 mm Sweep

Supply & fixing 450 mm sweep Air Circulatior fan(high speed) with metal body,canopy & blades( Make -Crompton TORPEDO (HS) or equivalent make of USHA/Bajaj/Havells/Orient as approve by E.I.C.) with necessary wooden board on wall with nuts, bolts, washer etc. as per direction of EIC.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & fixing 300 mm Heavy Duty Exhaust fan (Make-Crompton Heavy Duty EXHD300-6-1 or equivalent make of USHA/Bajaj/Havells/Orient as approved by E.I.C] of followinng sizes after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust as per direction of E.I.C. 12"( 300mm ) Speed >= 900 RPM

Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall as per GS (12")

Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S & F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order top revent concrete from entering the box.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Make- Legrand/Crabtree/ equivalent Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Extra for supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire as per GS.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By ISI-Medium GI pipe.

Supplying & fixing earth bus bar of galvanized (HotDip) MS flat 25 mm x 6mm on wall having clearance of 6mm from wall including providing drilled holes on the bus bar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments body to earth busbar incl. S & F 50 mm x 6 mmGalvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

Excavation of soil for installation of Earth Electrode and filling & ramming. (For Soft Soil)

Extra for treatment of soil by using salt & charcoal or coke for plate electrode

Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS No.-4 SWG

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 25 mm da ISI-M

40 mm da ISI-M

80 mm da ISI-M

COMPOUND LIGHT Supply & Fixing of 240V, 120 W LED compound light luminarie complete with all accessories and equipped with IP66 Protection (Make- Crompton -Cat no.- CRP-411-120-57-HL2-GL-NSG or equivalent make of Philips/Bajaj/wipro) on existing MS Pipe/Mini Pole as per direction of E.I.C.

Supply & Fixing of 240V, 40W LED Gate light Fitting to be fixed (Make- (Make- Philips BGP161 LED2300/WW PSU 220-240V 7043 IN or equivalent make of CG/Bajaj/wipro) on 40mm dia GI pipe on top of the gate pillar after making hole & mending good the damages with cement morter mixture as per direction of EIC.

Supply and fixing of angle iron frame fabricated from 40 mm x 40 mm square four nos hollow bar with cross and radial support including one no 40x40 mm angle iron support in the middle for the Sign board of following size with suitable three nos. crosss angle support welded with 4 nos angle hook in equal space for fixing on the structure with all necessary welding and fabrication. The structure shall rest in both sides with proper welding as per instruction of EIC. ii) S&F LED Sign Board made 3 mm thick ACP Sheet (Alstrong/ Aludecor) finished with approved metallic colour as back ground (blue) after router cutting. The riser structure also shall be covered with ACP Sheet.& appx 6-7 inch depth (Both size ACP sheet) iii) S&F Special type of imported acrylic English letter appx 50 mm thickness flushed on the ACP board made on imported acrylic ACAST sheet. The following letter font shall be in horizontal line as mentioned. iv) S&F SMD LED inside the board and to run for each letter including wiring , soldering etc and fixing the SMPS properly with the specification of the SMD --- 1. LED colour :White/ Red/ Blue (make-samsung /Nichia /Cree/Hisine ) 2.Stright : 2 or 3 nos LED per module 3. Luminous Flux : 140 LUMEN 4. Life : 70000 burning hours 5. Visibility: 100 meter atleast normal eye 6.Power Supply: 1.2 watt to1.6 watt per module 7.Input : 230A.C , Output : 12V DC 8.Shape of LED : recrangle or square 9. Grade : IP - 65 v) S & F LED Power supply 300/ 400W IP65 50/60Hz frequency, 108 to 305 VAC driver power supply other electrical accessories the panel prepared along with its necessary arrangement ( make Hisine/Migion/Cehosa/PWD appvd ) vi) Cost of painting of MS structure with 2 coats of RO primer and one coat of synthetic enamel paint after scrapping with emery paper properly make ICI/Asian paints vii) Cost of erection of scaffolding for fixing the Signage viii) Testing and commissioning of the LED board as per following nomenclature ix) cost of carrying the LED sign board from work shop to site.

Construction of 2nos. MS Structural Coumn of Square shape 300mmx300mm wide, 6 Mtr Height and construction of Base Supporting Column wide 300mm suitable for supporting the Glow sign Board as per direction of EIC. Supply of M.S. angle (50 x 50 x 4 mm) weight not less than 17.9 kg/mtr.for Column and 6.4 kg/mtr for Base Support.

Supply of M.S. Flat (25x 3 mm) weight not less than 2.5 kg/mtr.for Column and 0.64 kg/mtr for Base Support.

Fabrication charge of the iron structure incl. hiring of welding machine incl. making connection as required.

Erection of MS Structural column with all necessary arrangement and accessories in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc.

S & F 40 mm. dia. G.I.(M) 1.5 Mtr. Long Single arm bracket for fixing Street light & neccy painting with two coats of RO primer as per direction of EIC.

S & F of Base Plate and Base Cap Suitable for fixing of arm bracket in Tubular Poles with all necessary arrangement as per direction of EIC.

Painting of mini Pole of total lengths and no. of coats of paint, asgivenbelowwithreadymixed paint/primerofapprovedmake, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint.1st coat of aluminium paint over 1 coat of RO priming and 2nd coat of aluminium paint over 1st coat.

Providing CC (6:3:1) muffing 600x600x760 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if necessary.(With out GI Loop Box)

Supplying and Fixing Sintex SMC water proof looping cable box (Make:- Sintex Cat. No.GSMB 2525 or its equivalent ) having rubber gasket lining, locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit one NL on porcelain insulator or equivalent rating SP MCB etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting as per direction of EIC. 250 x 250 x 160mm

Supplying andDrawing 1.1KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make:- KEI/Gloster/MESCAB ) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 3 x 22/0.3 (1.5 sqmm) [for connecting light fittings to loop box]

S & F 3 phase timer box Made of 14 SWG MS sheet (size approx– 400 X 350 X 175mm) with powder coated synthetic paint incl. hinged type MS door , inter locking system consisting the following materials : 1) S & F 24 Hr. timer (L & T , J648B1/Legrand) – 1 no. 2) S & F 440 Volt 40A 3P contactor (L & T, ML – 3 , SS91851) – 1 no. 3) 6 amp auto mannual toggle switch – 1 no. (L &T) 4) Indicating lamp B & G (L&T) – 2 nos. 5) 440V, 40A, 10KA, Cseries FP MCB (legrand)on din rail for incoming-1no 6) 100A capacity 4W Brass stud type connector on FRP chair for I/C & O/G- 2nos All control circuit wiring would be made by 1x1.5 sqmm stranded Cu wire(FRLS) and the I/G & O/G circuit with 1x6sqmm copper wire maintaining colour code incl taping, socketing to complete the work. The box should be fixed on wall with suitable size of flush nut and necy. Connection. [NS]

REPAIRING & SERVICING of 320 KVA D.G. SET Supplying & Fixing of 400A,4P, 415V Contactor for DG AMF Panel(Make-TC)

Supplying & Fixing of 12V Relay for DG AMF Panel

Supplying & Fixing of Battery Charger set

Supplying & Fixing of 315A, 415V, Fuse for DG AMF Panel

Supplying & Fixing of DG Frame Main Lock

Supplying & Fixing of Disel Filter

Supplying & Fixing of Mobil filter

Supplying & Fixing of Air Filter

Supplying & Delivery of Mobil

Supplying & Fixing of Silencer Module Pad

Painting of DG Metal Base Frame with exhust Unit, one Coat primer with two coat enamel Paint

Supplying & Delivery Coolant

Supplying & Delivery Distlled Water

Supplying & Delivery Lubricant

Please Enable Macros to View BoQ information