NIT8Item4

Supply of 70 sq. mm 4 core armored aluminum conductor ,PVC sheathed, XLPE Power Cable 1.1 KV Grade as per IS 7098 (part 1) 1988. Make Grandlay/ gloster/Havells/ Any DJB approved make

Laying of one number PVC insulated and PVC sheathed/XLPE power cable 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench. Above 35sq. mm and up to 95sq. mm . As per site requirement. etc (Item code DSR(E&M)-7.1.2)

Laying of one number PVC insulated and PVC sheathed/XLPE power cable 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench.Above35sq. mm and up to 95sq. mm. As per site requirement. etc (Item code DSR(E&M)-7.2.2)

Supply and making of end terminals with brass compression gland and aluminum lungs for above power cables.

Supply of 100Amp. 4 pole MCCB. Make Schneider, L&T /Any other DJB approved make.

Replacement of existing MCCB with the new 100 AMP MCCB in the main panel and providing its connection from the bus bar using 25 sq. mm power cable.. As per site requirement.

Supply of 25 Amp 4 pole MCCB. Make Schneider, L&T /Any other DJB approved make

Supply of 63Amp 4 pole MCB. Make Schneider, L&T /Any other DJB approved make

Fabrication and supply of LT distribution panel double door, cubical type ,dust and vermin proof of size 900x1000x300mm having chamber as suitable to all switchgears to be fitted it should be having provision for cable entry from the bottom/top and also provision of carrying out routine maintenance from the front side only. Complete in all respect with 4nos. bus bar of suitable size as per requirement.

Fixing of all allied accessories including the above switchgears in the above panel including indicating lamps, voltmeter, ammeter, bus bar, etc. of required ratings. And making all the required incoming and outgoing connection in the panel using connectors, cables etc as per requirement.

Fabrication and supply of MS base frame duly painted of size as suitable to the new panel made out of MS channel/angle of suitable size etc.. As per site requirement.

The work includes construction of a firm CC structure of suitable size at the site for fixing of the new base frame with cement concrete mixture and bolts etc and further fixing the new panel on the base frame properly with nuts bolts etc.. As per site requirement.

Testing and commissioning of the L.T panel board, cables and connected equipments, etc on no load and on load as per satisfaction of engineer in charge.

K R ELECTRICAL

Raj Engineering Co.

N.K. BUILDCOM

ASHMITA ENGINEERS AND TRADERS

Avon Electricals

INNOVATIVE ENGINEERS

Premier Engineering Company

defence engineers (india)