Renovation with peripheral development of Paikarapur Govt. Pond in Ward No. 22

Dewatering by using 5Hp diesel pump including costof all hirecharges (considering water discharge quantity 600 lit/minute)

Earthwork by using hydraulic excavator of 1 cum bucket and depositing the excavated materials within 5 km lead including loading and unloading with all cost conveyance T&P sundries etc. complete as per direction of Engineer-in-Charge.

Compacting and waterring upto OMC rolling earth work with PRR in embankment in layers not exceeding 0.23m depth by PRR including hire & running charges of PRR etc complete.

Providing and spreading moorum and consolidation with HRR including watering cost and conveyance of moorum

Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer-in-charge of earth work.

Filling plinth with sand in layers not exceeding 20 cm in depth, well watered and compacted , top surface dressed and levelled to proper gradient including cost and conveyance of sand , all taxes and royalties, loading and unloading, all labour sundries T&P etc. complete as per direction of Engineer-in-Charge .

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Rough stone dry packing on Aprons and Revetments with hard stone 30cm and above size including cost, conveyance royality of all materials and labour charges etc.complete as per direction of Engineer-In-Charge.

Fabrication and manufacturing of solid precast concrete element with provisions of shear keys, connecting loops, dowel tubes and proper lifting accessoriesfor walls, beams, slabs, stairs, column etc, of various thickness, shape and size of different concrete grades manufactured in controlled factory environment with approved methodology including moulds (Pallet system, Tilts form, table moulds, battery moulds, vertical moulds, beam moulds, column moulds, staircase moulds, Facade mould, etc.), mixing, transporting and placing of concrete, vibrating, curing, finishing, making necessary cutott/holes of required sizes for services. yard handling & stacking all complete as per IS 11447:1985 and as per approved shop drawings and design mix as per the direction of Engineer-in-Charge (Cost of Mechanical, Electrical and Plumbing inserts will be paid separately).

Erection & Installation of Precast/Prestressed Concrete elements in correct & final position with proper line level and plumb at site making all arrangements (i.e cranes, push-pull jacks & all another T & P for lifting Placing & Alignment of elements, within erection tolerance as per IS 15916 as per approved shop drawings and all complete as per the direction of Engineer-in-Charge but excluding the cost of sim pads, non shrink grout and steel works i.e hangers. All work up to fifth floor.