The work of repair, rectification, fabrication, and machining of miscellaneous spares of Wagon Tippler, resilient plate of different FCU, gear boxes of Stacker, Reclaimer and Reclamation, Repairing of Fluid Coupling of CHP, BTPS, Obra

Amount

The work of Repairing/Strengthening of different types of housing of Wagon Tippler of CHP, BTPS

Repairing/Strengthening of different types of housing of WT of CHP. (01 Set = 02 Nos., upper and base/lower part)

The work of Repairing/Strengthening of different types of nuts & bolts & resilient plate of CHP, BTPS.

Fabrication of nuts & bolts for Slewing sector of old S/R of Size (24mm x 80mm).

Fabrication of nuts & bolts for WT side beam of wooden block of Size (16mm x 165mm).

Fabrication of nuts & bolts for WT base housing of Size (18mm x 130mm).

Fabrication of nuts & bolts for WT base grouting of Pivot housing of Size (33mm x 750mm).

Fabrication of rigid coupling nuts & bolts of 31.7mm x 170mm Size for Wagon Tippler of CHP, BTPS

Fabrication of sector gear nuts & bolts of 30x130mm Size for Wagon Tippler of CHP, BTPS.

Work for fabrication & machining of resilient plate FCU-20.

Work for fabrication & machining of resilient plate FCU-16.25

Repairing/fabrication work of different spares of CHP, BTPS, Obra

Repairing of damaged Drive/ Non Drive end pinion of Wagon Tippler

Repairing of damaged input pinion teeth of different type gear boxes of Old/New S/R

Fabrication of suspension bar from old & used scrap material by complete machining & turning as required size (ø57X2680/ ø63X2880 mm) of suspension bar for coal crusher.

Boring of required dia. in runner half coupling of input pinion shaft/motor shaft of conveyor system.

Repairing of Brake Drum coupling of wagon tippler (Gear Box/Motor).

Repairing of low speed coupling of conveyor system (main rout & stacker/Re-claimer).

Repairing of housing of bearing No. 22244 KC3-W-33.

Repairing of input pinion shaft/fluid coupling shaft of conveyor system.

Repairing of impeller/runner hub of fluid coupling.

Repairing of rigid coupling of wagon tippler.

Fabrication of shaft of Tripper from old & used scrap material.

Repairing of input pinion shaft of transmission gear box of old S/R (HM-121) & new S/R (HM-135).

Fabrication of Pinion of slewing gear box of old S/R (HM-121) & new S/R (HM-135) by old & used scrap material.

Fabrication of hold back assembly for gear box of Conv. system.

Reclamation/Repairing of Fluid Coupling.

Reclamation/Repairing of Fluid Coupling

M/s Anupam Engineering Works (BID ID -5199438)

KIRAN MECHANICAL WORKS (BID ID -5205267)