Loading…
Loading…
Tender Value
₹2.5 Cr
EMD Value
₹5.0 L
Closing Date
6 Jul 2026, 5:00 pmDue tomorrow
Chief Executive Officer
Office of the Cantonment Board, Jalandhar Cantt, Jalandhar, Punjab
Rejuvenation of Water Body Lal Dighi Pond, District Jalandhar Cantt, Punjab under AMRUT 2.0
2026_DLG_169817_1
JCB/Engg/PMIDC/335 dtd. 09.06.2026
Open Tender
Civil Works - Others
365 days
Lal Dighi Pond, Jalandhar Cantt
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
₹5.0 L
10 Jun 2026
10 Jun 2026
9 Jul 2026
11 Jun 2026
6 Jul 2026
11 Jun 2026
STANDARD BIDDING DOCUMENT FOR PROCUREMENT OF WORKS
Rejuvenation of Water Body at Lal Dighi Pond, District Jalandhar Cantt, Punjab under AMRUT 2.0 Scheme
Project Value: Capital Cost: Part-A & B Percentage Rate Rs. 229 Lakh O&M Cost Part-C Percentage Rate Rs. 22.38 Lakh.
Name of Work:Rejuvenation of Water Body at Lal Dighi Pond, District Jalandhar Cantt, Punjab under AMRUT 2.0 Scheme
Name of Bidder:
General Summary
S.No Particulars Total Amount (Rs)
Capital Works: Percentage Rate
1 CIVIL (PART-A) Enter Rate below without (+), (-) and (%) symbols For "At Par" Rate, Enter Zero.
2 ELECTRICAL (PART-B)
3 5 years' O& M (PART-C)
Estimate Amount (Part A,B, and C ) (In Rs):
Percentage Above/Below/At Par Select 0 %
Amount as per percentage quoted, Percentage Rate (Part A,B & C) (Amount in Rs)
Amount In Words No Rupees and No Paise
Provisional Sum (Not part of bidding) Rs in Lakh =
Provisional Sum
S.no. Description Unit Qty Amt.(Rs.lakh)
Provisional Sum
1 Contingencies = 5 % of Capital Cost 1.14
2 Electrical Connection Charges 2.79
Total : Provisional Sum (Not part of bidding)
S.no. CSR Ref. Description Unit Qty Rate (Rs) Rate (Rs. In Words) Amount (Rs)
Capital Works CSR Items ( Part - A)- CIVIL
Sub Head-1:Development of Parks
(a)Softscape work
32.4 (a) Site clearance Excavation in dumped stone or malba including stacking of unserviceable material separately and disposal of unserviceable material. Lead up to 50 m and lift up to 1.5 m, disposed material to be neatly dressed in all kinds of soils. Cum 1050 332
32.4 (b) Surface dressing of ground including removing rank vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m in all kinds of soil. sqm 18922 15
32.9 (a) Fine grassing including uprooting rank vegetation and weeds by digging the area to a depth of 30 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growth after 10 to 15 days,mixing fertilizer and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts, watering,weeding and maintenance for 30 days or till thick lawn is formed. Planting Selection no. 1 grass roots in rows 5 cm apart in both directions. sqm 10500 69
32.13 Digging of pits in all kinds of soil & refilling the same, with the excavated earth mixed with well decayed farm yard manure @ 3% of pit volume and insecticide for termite control. Cum 11.37 388
32.18 Supplying & Planting permanent shrubs in prepared pits and watering. Each 421 66
32.22 Planting seasonal flower in beds
(b) Planting seasonals at flowering stage in beds including digging of beds to 15 cm depth and mixing FYM, fertilizer and insecticides, planting at 20cm distance from plant to plant and row to row. Sqm 129.6 1020
32.13 Digging of pits in all kinds of soil & refilling the same, with the excavated earth mixed with well decayed farm yard manure @ 30% of pit volume and insecticide for termite control Cum 3.78 388
32.14 Supplying and planting permanent trees in prepared pits and watering Each 140 170
32.51 Preparation of mounds of various size and shapes including supply of good earth, in layers not exceeding 20 cm in depth, breaking of clods, watering each layer, dressing etc, lead up to 50 m and lift up to 1.5 m complete as per directions of Engineer-in-charge Cum 155.12 899
5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth
Carriage of Malba and unserviceable material taken lead up to 5 Km as per direction of Engineer incharge Cum 1050 182.4
(b) Construction of Pathway and Parking
24.6 ( c ) Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lift and combined lead up to 60 mtr. Cum 185 32
10.6(b) (ii) Cement concrete 1:8:16 With stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type Cum 234.5 3127
10.13 (ii) Cement concrete 1:2:4 mixing by mechanical means using concrete mixer volumetric type Cum 226.55 4670
0.999 Providing and Laying Tactile Flooring full body vitrified , low water absorption below 5%, having excellent slip resistance , very dense, durable and abrasion resistant, solid through colour, fade proof, highly chemical and stain resistance unglazed finish porcelain tile of size 300mm x 300mm x 10mm + 5mm thick, approved profile design, Tec-button/Tec-liner laid in ordinary grey cement and on 20mm thick bed of cement mortar 1:3 filling neat cement slurry between joints with White Cement containing pigment to match the shade complete in all respect. (Tile design and pattern will be as per guidelines issued for persons with disability) Sqm 79.5 1810
32.75 Providing and fixing pair of Plastic dustbins 100 litre volume each, of two different colours, for dry and wet waste, made of virgin plastic to be mounted on MS rectangular hollow section 50 x 25 x 3 mm frames pivoted on 3 MS square hollow section verticals, 1 m above ground, one 35 cm RHS welded to each vertical member at base and grouted in 180 x 40 x 30 cm 1:2:4 cement concrete. Each 25 12753
32.57 (a) Supply and installation of garden bench Chair type garden bench with L-shaped sides made of reinforced concrete (M-30), thickness 100 mm, overall height 1000 mm, base width 620 mm. Back and seat shall consist of 5 Nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. Seating height of the bench shall be 450 mm. The bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation Each 30 5299
0.999 Sand filling under floor and in wells of bridge foundation including handling withing 100 metres
Sand Pit for kids (Dia = 10 m) Cum 23.57 1005
32.55 Providing and fixing of white river (Stone) pebbles size of 2" to 2.50" dia in natural colour at site of work including loading, unloading and carriage
For Reflexology Pathway (Area as per Autocad) Sqm 50 684
5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth
Coarse Sand Cum 97.42 517.2487
From Lohand Khad 106 km
Stone Metal 40mm gauge Cum 234.5 500.47110000000004
From Mirthal 97 km
Crushed Bajri 20/25 mm Cum 77.03 500.47110000000004
From Mirthal 97 km
Crushed Bajri 10 mm to 11.2 mm Cum 115.54 557.4272
From Haryaal 129 km
Fine sand : Phillaur 40 Km Cum 117.25 287.61599999999993
Difference in Rates of materials
Coarse Sand Cum 97.42 -143.91999999999996
Stone Metal 40mm gauge Cum 234.5 -222.53279999999995
Crushed Bajri 20/25 mm Cum 77.03 -233.92319999999995
Crushed Bajri 10 mm to 11.2 mm Cum 115.54 -227.98719999999997
( c ) Construction of Kachha Pathway
Earth work excavation(For ordinary path way)
6.2 Earth work excavation in ordinary soil,exclusive of compensation of earth of earth
(a) Kassi work undressed involving an average horizontal throw upto 2 meters and average vertical lift upto .5 meter including breaking of cloda.
For Pathway Cum 57.9 77
Brick edging of foot Path
32.54 Edging of paths/ beds with bricks/tiles laid dry,including required excavation, refilling, consolidating with hand and spreading surplus earth neatly within lead of 50 m.
(a) Bricks laid lengthwise with half brick depth Rmt 772 37
Difference in Rates of materials
Bricks : 1000 Nos 3350 738.64
Sub Head-2 : Construction of Boundary wall
6.6 Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres Cum 146.221 182
10.6(b) (ii) Cement concrete 1:8:16 With stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type Cum 41.559999999999995 3127
11.5 First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth Cum 97.55 5013
11.6 First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. Cum 137.07 5151
10.27 Damp proof course 4cm thick of cement concrete 1:2:4 with water proofing compound as per manufactures guidelines Sqm 144.17 244
15.59 Cement pointing 1:2 deep variety Sqm 629.42 127
10.13 (ii) Cement concrete 1:2:4 mixing by mechanical means using concrete mixer volumetric type Cum 14.64 4670
9.1 Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) Sqm 125 210
18.4 Wrought iron & Mild steel ladders, framed grills,gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position Qtl 82.39 9140
Add as per AC slip-4 for Hollow tube Qtl 0.95 373.3
Add as per AC slip-4 for MS Flat and MS Sq bars Qtl 2.54 1306.54
Add as per AC slip-4 for MS Angle Qtl 76.54 1430.97
16.2 Applying priming coat with metal primer on new steel or iron work including preparation of surface. Sqm 573.6 24
16.17 Painting two or more coats excluding priming coat with synthetic enamel paint f in all shades on wood work, metallic or plastered concrete surface to give an even shade . Sqm 573.6 66
5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth
Coarse Sand Cum 9.19 517.2487
From Lohand Khad 106 km
Stone Metal 40mm gauge Cum 41.56 500.47110000000004
From Mirthal 97 km
Crushed Bajri 20/25 mm Cum 7.35 500.47110000000004
From Mirthal 97 km
Crushed Bajri 10 mm to 11.2 mm Cum 11.02 557.4272
From Haryaal 129 km
Fine sand : Phillaur 40 Km Cum 81.33 287.61599999999993
Difference in Rates of materials
Coarse Sand Cum 9.19 -143.91999999999996
Stone Metal 40mm gauge Cum 41.56 -222.53279999999995
Crushed Bajri 20/25 mm Cum 7.35 -233.92319999999995
Crushed Bajri 10 mm to 11.2 mm Cum 11.02 -227.98719999999997
Sub Head-3: Construction of Gazebo (05Nos)
6.6 Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres Cum 5.16 182
10.6(b) (ii) Cement concrete 1:8:16 With stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type Cum 3.54 3127
10.13 (ii) Cement concrete 1:2:4 mixing by mechanical means using concrete mixer volumetric type Cum 5.16 4670
18.52 (a) Steel work in built up tubular (round, square or rectangular hollow tubes etc. ISI Marked) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete having span:- Up to 15.00 Mtr. Span Qtl 18.86 10327
Add as per AC slip-4 for MS Angle Qtl 18.86 1430.97
13.27 (iii) Providing and fixing ( PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti cappillary groove and return leg. The steel sheet must be having yield strength of 550 MPa ( Fy= 550 MPa) metallic coated with Zinc- Aluminium alloy ( i.e. 55% Al, 43.4%Zinc, 1.6% Si-Zincalume) AZ150 ( Min. 150 bm/mm2 total on both sides), pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25% -40%. should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required
16.2 Applying priming coat with metal primer on new steel or iron work including preparation of surface. Sqm 45.4 24
16.17 Painting two or more coats excluding priming coat with synthetic enamel paint f in all shades on wood work, metallic or plastered concrete surface to give an even shade . Sqm 45.4 66
5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth
Coarse Sand Cum 2.22 517.2487
From Lohand Khad 106 km
Stone Metal 40mm gauge Cum 3.54 500.47110000000004
From Mirthal 97 km
Crushed Bajri 20/25 mm Cum 1.75 500.47110000000004
From Mirthal 97 km
Crushed Bajri 10 mm to 11.2 mm Cum 2.63 557.4272
From Haryaal 129 km
Fine sand : Phillaur 40 Km Cum 1.77 287.61599999999993
Difference in Rates of materials
Coarse Sand Cum 2.22 -143.91999999999996
Stone Metal 40mm gauge Cum 3.54 -222.53279999999995
Crushed Bajri 20/25 mm Cum 1.75 -233.92319999999995
Crushed Bajri 10 mm to 11.2 mm Cum 2.63 -227.98719999999997
Sub Head-6:Construction of Badminton Court (02 Nos)
32.54 (a) Edging of paths/bed with bricks/tiles laid dry including required excavation, refilling, consolidating with hand and spreading surplus.Bricks laid length wise with half brick depth Mtr 78.4 37
6.2 (a) Earth work excavation in ordinary soil, exclusive of compensation of earth:- Kassi work undressed involving an average horizontal throw up to 2.0 metres and an average vertical lift up to 0.5 metres including breaking of clods. Cum 24.93 77
10.6(b) (ii) Cement concrete 1:8:16 With stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type Cum 0.04 3127
10.13 (ii) Cement concrete 1:2:4 mixing by mechanical means using concrete mixer volumetric type Cum 0.16 4670
18.53 Steel work in built up tubular pipes (round, square or rectangular hollow tubes etc. ISI Marked) for flat shed (ie.Where no truss work is involved) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Qtl 0.21 9490
Add as per AC slip-4 for Hollow Section Qtl 0.21 373.3
5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth
Coarse Sand Cum 0.07 517.2487
From Lohand Khad 106 km
Stone Metal 40mm gauge Cum 0.04 500.47110000000004
From Mirthal 97 km
Crushed Bajri 20/25 mm Cum 0.05 500.47110000000004
From Mirthal 97 km
Crushed Bajri 10 mm to 11.2 mm Cum 0.08 557.4272
From Haryaal 129 km
Fine sand : Phillaur 40 Km Cum 0.02 287.61599999999993
Difference in Rates of materials
Coarse Sand Cum 0.07 -143.91999999999996
Stone Metal 40mm gauge Cum 0.04 -222.53279999999995
Crushed Bajri 20/25 mm Cum 0.05 -233.92319999999995
Crushed Bajri 10 mm to 11.2 mm Cum 0.07 -227.98719999999997
Sub Head-7:Providing and fixing Floating High & Heavy Cascade Fountain
6.6 Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres Cum 1911.591 182
10.6(b) (ii) Cement concrete 1:8:16 With stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type Cum 212.399 3127
11.5 First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth Cum 86.43 5013
15.9 12.5 mm thick cement plaster 1:4 Sqm 294.08 189
10.13 (ii) Cement concrete 1:2:4 mixing by mechanical means using concrete mixer volumetric type Cum 212.4 4670
14.87 Black Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone,including rubbing and polishing including labour for fixing dowel pins and cramps Sqm 334.92999999999995 3155
14.72 Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. Sqm 2123.99 672
For base of fountain
14.89 (b) Providing and laying Polished Granite stone 18 mm thick flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. Sqm 81.69 2813
5.2 (i) Earth,Surkhi,Sand,earth,Fly Ash,Bajri,Ballast,Stone Boulders,Kankar and Building Rubbish,Earth
Coarse Sand Cum 95.58 517.2487
From Lohand Khad 106 km
Stone Metal 40mm gauge Cum 212.4 500.47110000000004
From Mirthal 97 km
Crushed Bajri 20/25 mm Cum 76.46 500.47110000000004
From Mirthal 97 km
Crushed Bajri 10 mm to 11.2 mm Cum 114.7 557.4272
From Haryaal 129 km
Fine sand : Phillaur 40 Km Cum 131.93 287.61599999999993
Difference in Rates of materials
Coarse Sand Cum 95.58 -143.91999999999996
Stone Metal 40mm gauge Cum 212.4 -222.53279999999995
Crushed Bajri 20/25 mm Cum 76.46 -233.92319999999995
Crushed Bajri 10 mm to 11.2 mm Cum 114.7 -227.98719999999997
Capital Works ' CSR based Civil Items ( In Rs)
Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 0.0535
Total Capital Works Amount after adding 5.35% ( In Rs) 4625648.86
Capital Works Non CSR Items ( Part - A)- Civil
Sub Head-1:Development of Parks
(b) Construction of Pathway and Parking
EPDM Rubber Florring
NS Providing and Laying EPDM Rubber Florring 25mm Thick (19mm SBR +6mm Colour EPDM) Complete as Per Specifications Sqm 460 4930
Sub Head-4:Sensory play Equipment for Specially Abled/Divyang
Platform Merry Go round:
NS Providing, fixing and commissioning of merri Go round (Revolving platform) Product zone 2.8 m x2.8 m and play zone 4.8 m x 4.8 m Design enable three wheel chairs at a time .Handle of MGR is made of 2.5 mm to 3mm thick 20NB GI CHS Premium quality.Bearings are provided for smooth rotation .All metal parts are painted up to 90 microns. All fasteners used in assembling are made of stainless steel material. Each 1 89467.66
Out door Muzi Chime:
NS Providing and Fixing of Out door Muzi Chime having product zone 1.0m x 0.9 m x1.5 m and play Zone 2.0 m x1.9 m x2.3 m capable for kids all abilities complete in all respect to the satisfaction of Engineer -in -charge Note:- Rate includes GST,CP,Freight Charges & Instalation. Each 1 50755.78
NS Providing and Fixing of musical drum having product zone 1.5m x1.5 m and play Zone 2.0 m x2.5 m capable for 3 kids all abilities at a time complete in all respect to the satisfaction of Engineer -in -charge Note:- Rate includes GST,CP,Freight Charges & Instalation. Each 1 89247.8
Sub Head-5:Playing and Gym Equipments
NS Health Walker Size 57"x42"x14": Providing & fixing health walker main pipe made of 114mm OD & 3.75 mm thickness mild steel round pipe swing pipe 48mm x 3mm swing with rubber seal bearing all alloy covered with S.S. cover, foot rest made of mild steel sheet 16-gauge size of foot rest 12" x 5.6" with rubber both side handle made of 31mm round pipe, plastic cover on base with best quality powder coating. Each 1 46061
NS Cross Trainer Size 58"x18"x74": Providing & fixing cross trainer main pipe made of 114mm OD & 3.75 mm thickness mild steel round pipe swing pipe 38mm x 31mm mild steel round pipe with best quality rubber handle for hand grip working with rubber seal bearing system and foot rest main pipe for 60x40mm mild steel flat pipe size of foot rest 5.5" x 12" with base plastic cover all alloy cover with SS cover all mild steel pipe best quality powder coating. Each 1 43242
NS Lat pull down double Size 107"x62"x34": Providing & fixing Lat pull down double made of 114mm OD & 3.75 mm thickness 38mm round pipe, 48mm round pipe 50x50mm square pipe complete. Operating with bearing system with rubber seal bearing beat quality rubber handles for grip and smoothly working. Plastic base cover and best quality powder coating all alloy are covered the S.S covers. Each 1 60720
NS MERRY GO ROUND size 8'.0 ft in dia, platform 3 mm thickness non skid CRC steel finished with Pupolyurethene paint 60-100 microns, Base member of 25 mmx 5mm and 40x5mm ms angle finfished with powder coated 60-70 microon to joint with 60 mm MS rod with water proof bearing, handrails of 20 mm MS pipesfinished with powder coated 60-70 micron, vertical MSpipe76 mm diaand thickness 3.5 mmfinishred with PU paint60-100 micron. connecting member consist of42 mm dia 3mm thick finished with 60-100 micron Each 1 59360
NS 4 SEATER SEE SAW 4 seater : Providing fixing and commissioning Size : Length 9'-10" x width1'-8" Seats size 300x300 mmouter to outer 4nos. LLDPE+HDPE (blow moulding) thickness 4 mm(above)weight 850 gm Verticalsupport:GI poles-dia114 mm with 3.2 mm thickness, 25 mm dia bearings, galvanized pipes & further powder coated 60-70 microns MS base pipe 50 mm thick with T-handles on either side, galvanized & further powder coated 60-70 microns. Each 1 34775
NS DOUBLE SLIDE Providing fixing and commissioning of Double slide: Size 16'-6" x 6'.0" x 8'.0" Frame: VerticalMS pipedia 75 mm thickness3-3.5 mm finished with powder coating 60-70 micron. Platform: size 1220 x01220 x 2 mm & supporting square pipe used in bottom 25x25x2 mm powder coating 60-70 micron. perforated sheet usedin square chequer for jointing and supportingthe deck (25X75x2mm), (25x25x2mm) platform safety Railing: CRC pipe dia 31.75 mm, thickness1.6 mm connector pipe dia 25.4 mm with thickness 1.6 mm. Steps: size 1915 x600 mm laser punched perforated sheeting 2 mm thick with 7 steps. Steps Railing: CRC pipe dia 31.75 mm, Thickness 1.6 mm. connector pipes dia 25.4 mm with thickness 1.6 mm. Width of slide: 1180 mm made of LLDPE Each 1 75437
Sub Head-6:Construction of Badminton Court (02 Nos)
NS Providing and fixing badminton nylon net mesh Size: 20mm & badmintn net size 6 x 0.76m & made of thick twisted and knotted polyethylene cord. Head bond stitched with 1.5" wide heavy weight canvas. Sides and bottom made of 0.75" polyseter fabric Each 2 2879.06
Sub Head-7:Providing and fixing Floating High & Heavy Cascade Fountain
High & Heavy Cascade Fountain
NS Supply instalation testing and commisoning of Floating water feature Floating High & Heavy Cascade Fountain at centre of the pond with boat style floatation device – 1 set. Pump: 10 hp x 2; LED sequencing light RGB, 54 W, polymer construction – 12 nos . Floating customised Water Column, with double pontoon floatation device, each Water Column consisting of 24 numbers brass nozzles with a jet height of 6 m – 6 sets placed at a PCD of 25 m. Pumps 7.5 hp x 6 sets, each provided with a butterfly valve. LED sequencing light, RGB, 54 W, polymer construction – 4 x 6 sets. Composite electrical panel, outdoor type with LED sequencer – 1 set. This panel needs to be kept right at the bank of the pond. Cables to be supplied:2.5 sq.mm x 3 core copper armoured cable – 800 m, 1.5 sq.mm x 4 core flexible copper cable – 900 m. Anchoring materials like concrete blocks, steel wire rope, PVC conduit pipe Nos 1 5167745
Capital Works ' Non CSR based Civil Items ( In Rs)
Capital Works ( Part - A) " Civil "
CSR based amount after adding 5.35% ( In Rs)
Non - CSR based amount ( In Rs)
Total : Part - A ( CIVIL) CSR + Non CSR Amount : ( Rs)
Electrical Works, Lal Diggi Pond- Jalandhar Cantt.
Sr.No. Item No. Description Unit Quantity Rate (Rs) Rate (Rs. In Words) Amount (Rs.)
(Electrical Works)
Supply, Installation, Testing and Commissioning of the following Items complete in all respect and as per Scope of Work, Specification and as required at site:
1. Capital Works ' CSR based Items
B GI Pipe Pole & Cement Muff for Lighting Poles;
34.29 A GI PIPE POLES:
Supply and erection of G.I. pipe ‘A’ quality of suitable length and dia. confirming to IS:1239 (Part-I) 1979, including fixing up to a given depth below G/L, the hole of excavation about 30cm dia. and given depth to be filled in up to 15cm below G/L with 1:2:4 cement concrete including painting of pole with two coats of approved aluminium paint as required:-
(i) G.I. Pipe Pole 4 metre Long, Dia. 65mm, Planting Depth 80cm with Pit Depth 95cm. Each 52 3586.7 Three Thousand Five Hundred Eighty Six Rupees and Seventy Paise 186508.4
34.33 CEMENT CONCRETE MUFFS:
(v) Making of cement concrete muff of overall size 450mmdia., suitable length (15cm below ground level) with 1:2:4 cement concrete mixture. The muff is to be made around the steel tubular pole/GI pipe pole. The outer surface of the muff shall be finished with 1:2 cement plaster with two coats of white snowcem complete in all respect as approved and desired by the Engineer in- Charge at site:-
(a) Cement Concrete Muff of Overall Size 450mm dia., 45cm long Each 52 381 Three Hundred Eighty One Rupees and No Paise 19812
D Wiring, Lighting & Accessories, AC (for Panel Room):
34.03 RECESSED HDPE PIPE WIRING SYSTEM WITH MODULAR SWITCHES:
Wiring in PVC insulated copper conductor single core FR cable (ISI marked), overall 1.5sq. mm, 1100volts grade to be laid in HDPE electrical conduit pipe 20mm/25mm dia. ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
(i) a Wiring fan point (Without fan box) 1 1038 One Thousand Thirty Eight Rupees and No Paise 1038
(ii) Wiring light point 1 1048.8 One Thousand Forty Eight Rupees and Eighty Paise 1048.8
(iv) Wiring 6Amp. Wall socket point 2 690 Six Hundred Ninety Rupees and No Paise 1380
(vi) Wiring 16/20Amp. Power plug control point 2 435.6 Four Hundred Thirty Five Rupees and Sixty Paise 871.2
34.09 (xiii) Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
(c.) Overall size 2.5sq.mm (50/0.25mm), 3Core 20 98.8 Ninety Eight Rupees and Eighty Paise 1976
34.17 SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/RCBO's/ RCCB's:
Supply and erection of sheet metal double door Phase segregated distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with rovision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/RCBO's as incomer and SP MCB's as outgoings) as per PWD General Specifications including connections with suitable size of thimbles and bonding to existing earth etc.
(i) SP&N Double Double Door Distribution Board 4 way each (for Panel Room) 1 1045.35 One Thousand Forty Five Rupees and Thirty Five Paise 1045.35
34.16 A MINIATURE CIRCUIT BREAKERS:
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10KA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
(ii) MCB Single Pole 6-32amp. (10KA, Curve-C) 2 180.9 One Hundred Eighty Rupees and Ninety Paise 361.8
(vi) MCB Double Pole 6-32amp. (10KA, Curve-C) 1 550.8 Five Hundred Fifty Rupees and Eighty Paise 550.8
E Cable, Wire & Accessories;
34.10 D XLPE INSULATED UN-ARMOURED CABLES (LOOSE):
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
(i) Overall size 6sq.mm (2Core) Un-armoured (Loose) Metre 800 62.5 Sixty Two Rupees and Fifty Paise 50000
(xxvi) Overall size 95sq.mm (3.5 Core) Un-armoured (Loose) Metre 125 430 Four Hundred Thirty Rupees and No Paise 53750
34.37 DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
34.37 A Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
(i) Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.) Metre 800 127 One Hundred Twenty Seven Rupees and No Paise 101600
(ii) Double Walled Corrugated HDPE Pipe 63/ 51mm (Outer/ Inner dia.) Metre 125 148 One Hundred Forty Eight Rupees and No Paise 18500
34.33 (vii) Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site:-
(a) SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 140mm x 140mm x 95mm with hinged water tight cover with locking arrangement Each 54 724 Seven Hundred Twenty Four Rupees and No Paise 39096
(xii) Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:-
(d) Overall size 1.5sq.mm (48/0.20mm), 2Core Metre 250 45.5 Forty Five Rupees and Fifty Paise 11375
34.38 C Supply and erection of heavy duty brass single compression gland for cable end termination duly complete with checknuts etc. including making necessary connections.
(iii) Brass Gland for Aluminium cable 2/3/4 core size 6 sq. mm Each 115 73.2 Seventy Three Rupees and Twenty Paise 8418
(ix) Brass Gland for Aluminium cable 2/3/4 core size 95-120 sq. mm Each 4 136.8 One Hundred Thirty Six Rupees and Eighty Paise 547.2
34.38 A Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:-
(i) Aluminium thimble cable core size 4-6 sq. mm Each 230 13 Thirteen Rupees and No Paise 2990
(vi) Aluminium thimble cable core size 95 sq. mm Each 16 35 Thirty Five Rupees and No Paise 560
F Earthing for LT Panel, Feeder Pillar & Poles;
34.13 (xv) Earthing earth rod 20 mm dia for providing earth connections upto line earth with G.I. Wire 8 S.W.G. (4mm dia.). The rod shall be tapered at one end and flatted on other end. The hole size 10mm dia shall be drilled on the flatened side for facilitating connection with G.I. wire and thimble etc. The rod shall be erected in ground upto complete length vertically:-
(c) GI Earth rod 20 mm dia., 6 mtr. Long Each 14 2288.75 Two Thousand Two Hundred Eighty Eight Rupees and Seventy Five Paise 32042.5
34.13 (xx) Bonding to existing earth with 8S.W.G. (4mm dia) G.I. wire fixed with stapples on wall. metre 925 15 Fifteen Rupees and No Paise 13875
Capital Works 'CSR based Electrical Items' (In Rs)
Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023 Capital Works 'CSR based Electrical Items' after adding 5.35% (In Rs)
2.Capital Works ' Non-CSR based Items
A LT Panel & Feeder Pillar;
NS LT Panel 415 V indoor IP-42 compartmentalized, 1.6 mm CRCA sheet for non load bearing member & 2 mm for load bearing member, front lockable hinged door, wall mountable, dust & vermin proof, epoxy coated, detachable gland plate, 200A TPN Al. bus-bar complete with all accessories and as below: Incomer: 200 A TPN MCCB 25 KA with O/L, S/C, Surge Protection Device, digital multi-function meter with RS485, indication lamps for R-Y-B, On-Off-Trip complete as required - 1 Set Outgoing: a) 160 A TPN MCCB 25 KA with O/L, S/C, Device, digital multi-function meter with RS485, indication lamps for R-Y-B complete as required - 1 Set (for Fountain) b) 26 KVAR (2x4+6x3) heavy duty Capacitor with 10 step APFC relay, MCCB, capacitor duty contactor, indication lamps, selector switch, push button, aux. contactor, MCB etc. complete with all accessories and as required - 1 set a) 25A DP power contactor with Astro Time Switch & 6A SPN MCB (6 no's) for automatic on/off operation of lights - 1 Set. d) 32 A TPN MCB - 2 No's e) 32 A SPN MCB - 3 No’s Each 1 302100 302100
NS Feeder Pillar 240 V Outdoor type (IP-55 with rain canopy), stand mounting, dust and vermin proof, powder coated finish made out of 2 mm CRCA sheet steel. Panel shall be with pad-locking arrangement, detachable gland plate, stand made out of MS angle, SPN Al bus-bar complete with all accessories and as below: Incomer: a) 32 A SPN MCB with indication lamp complete as required -1 Set Outgoing: a) 25A DP power contactor with Astro Time Switch & 6A SPN MCB (6 no's) for automatic on/off operation of lights - 1 Set. b) 16A SPN MCB - 2 set Each 1 48000 Forty Eight Thousand Rupees and No Paise 48000
C LED Post Top Lighting Fixture for Pole & Gate Lighting;
(Ref: RUIDP ISOR 2023, 67.10) Providing & Fixing of IK08 IP65 protected Top/Bottom mounted LED Post top Luminarie made of single piece construction powder coated die cast alluminium housing with UV stabalized Clear / frosted Polycarbonate diffuser and Aluminium anodised with sand blast reflector. The System level Luminous efficacy ≥ 100 Lumen/W. SMD LEDs is to be used, System CRI>70, CCT: 3000/4000/6500 K. The integral electronic driver must be potted & has a unique BIS R number must be potted & has a unique BIS R number constant current and Internal/external surge protection device of min. 4KV(L- N) and efficiency > 85%, PF>0.9, THD<10% and input Voltage range of 140-270V AC at 50Hz. System life of 50000 Burning hours with 70% of Initial Lumens maintained . Driver current <750mA. Fixture must be in compliance with BIS Standards and Trade mark Certificate complete in all respect.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
Minimum lumen output 2500 lm Post top Luminarie (Ref: 67.10.1) (for Gate Lighting) Each 2 5202 Five Thousand Two Hundred Two Rupees and No Paise 10404
Minimum lumen output 4000 lm Post top Luminarie (Ref: 67.10.3) (for Park Lighting) Each 52 6739 Six Thousand Seven Hundred Thirty Nine Rupees and No Paise 350428
D Wiring, Lighting & Accessories, AC (for Panel Room):
RUIDP ISOR 2023, 66.4 Providing & Fixing of IP20, 2'x2' LED Surface/ Recessed mounting Mid power SMD type LED Light fixture not less than 50mm housing depth made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with 4 KV internal/external surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection (Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD < 10 % , p.f.≥0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in- charge. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
Surface Mounting (Ref: 66.4.2)
Minimum lumen output 4200 lm (Ref: 66.4.2.3) 1 3391 Three Thousand Three Hundred Ninety One Rupees and No Paise 3391
RUIDP ISOR 2023, 64.12 Providing & Fixing of Heavy duty capacitor start, copper wound Double ball bearing 900/1400 RPM single phase Exhaust fan conforming to IS:2312 ISI marked in existing opening including making connections testing etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
300 mm sweep(900/1400 RPM) (Ref: 64.12.1) 1 3254 Three Thousand Two Hundred Fifty Four Rupees and No Paise 3254
Capital Works 'Non CSR based Electrical Items' (In Rs)
Total : (Electrical) CSR + Non CSR Amount : (Rs)
Operation & Maintenance
S.no. CSR Ref. Description Unit Qty Rate (Rs) Rate (Rs. In Words) Amount (Rs)
5 Years' Operation & Maintenance Cost (PART-B)
NS 1st Year. Per month 12 13157.79 Fourteen Thousand Thirty Three Rupees and Sixteen Paise
NS 2nd Year. Per month 12 38750.12 Twenty Thousand Thirty Eight Rupees and Sixteen Paise
NS 3rd Year. Per month 12 41656.38 Twenty One Thousand Five Hundred Forty One Rupees and No Paise
NS 4th Year. Per month 12 44780.61 Twenty Three Thousand One Hundred Fifty Six Rupees and Fifty Eight Paise
NS 5th Year. Per month 12 48139.15 Twenty Four Thousand Eight Hundred Ninety Three Rupees and Thirty Three Paise
5 Years' Operation & Maintenance Cost ( Part - C)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 27.43 MB
Tendernotice_2.pdf
PDF • 32.64 MB
Tendernotice_3.pdf
PDF • 0.86 MB
BOQ.xls
Additional Documents • 0.95 MB
Download all tender documents and submit your bid