REPAIR MAINTAINENCE AND PAINTING POLISHING OF WOODEN AND STEEL FURNITURE OF INHS ASVINI UNDER GE NW KUNJALI COLABA MUMBAI

Amount

8 drawer almirah clerical Drg No - TP

Material and labour for removal of existing worn out paint from in side & outside including preparation of surface frame completely and Material and labour for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified and as directed by Engr-in-Charge and shown on drgs.

Removing of unsv locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for almirah clerical with 8 drawer complete all as specified and as directed by Engr-in-Charge

Removing of unsv/broken handles and providing new handle steel chromium plated for almirah clerical with 8 drawer complete all as specified and as directed by Engr-in-Charge

Steel cupboard for medicine Drg No - VSDU-8

Material and labour for removal of existing worn out paint from in side & outside including preparation of surface frame completely and Material and labour for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Removing of unsv locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for steel cupboard for medicine complete all as specified and as directed by Engr-in-Charge

Removing of unsv/broken handles and providing new handle steel chromium plated for steel cupboard for medicine complete all as specified and as directed by Engr-in-Charge

Cupboard for general purpose Drg No - VSDU-6

Material and labour for removal of existing worn out paint from in side & outside including preparation of surface frame completely and Material and labour for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Removing of unsv locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for cupboard for general purpose complete all as specified and as directed by Engr-in-Charge

Removing of unsv/broken handles and providing new handle steel chromium plated for cupboard for general purpose complete all as specified and as directed by Engr-in-Charge

Cupboard for surgeon Drg No - VSDU-4

Material and labour for removal of existing worn out paint from in side & outside including preparation of surface frame completely and Material and labour for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Removing of unsv locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for ward care bed side lockers complete all as specified and as directed by Engr-in-Charge

Removing of unsv/broken handles and providing new handle steel chromium plated for cupboard for surgeon complete all as specified and as directed by Engr-in-Charge

Bed side cupboard for patient Drg No - VSDU-5

Material and labour for removal of existing worn out paint from in side & outside including preparation of surface frame completely and Material and labour for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Removing of unsv locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for ward care bed side lockers complete all as specified and as directed by Engr-in-Charge

Removing of unsv/broken handles and providing new handle steel chromium plated for bedside cupboard for patient complete all as specified and as directed by Engr-in-Charge

Storage rack Drg No - TP

Material and labour for removal of existing worn out paint from in side & outside including preparation of surface frame completely and Material and labour for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Ward care bed side lockers Drg No - TP

Material and labour for removal of existing worn out paint from in side & outside including preparation of surface frame completely and Material and labour for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Removing of unsv locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for ward care bed side lockers complete all as specified and as directed by Engr-in-Charge

Material and labour for gas welding of ward care bed side lockers wherever required complete all as specified and as directed by Engr-in-Charge

4 drawer book case with glass Drg No - TP

Material and labour for removal of existing worn out paint from in side & outside including preparation of surface frame completely and Material and labour for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Removing of unsv locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for all the four drawers of book case complete all as specified and as directed by Engr-in-Charge

Removing of old/broken glass from drawer of book case & providing new glass (required size) of thickness 5mm complete all as specified, directed and shown on drgs.

Cabinet filling steel 2 drawer Drg No - FD-293

Material and labour for removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and Material and labour for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Removing of unsv locks and providing new locks of size 50mm 4 lever with brass lever and steel casing and stainless steel keys in duplicate for cabinet filling with two side drawer complete all as specified and as directed by Engr-in-Charge

Cabinet filling 2 drawer lateral type Drg No - FD-293

Material and labour for removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and Material and labour for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Removing of unsv locks and providing new locks of size 50mm 4 lever with brass lever and steel casing and stainless steel keys in duplicate for cabinet filling two drawer lateral type complete all as specified and as directed by Engr-in-Charge

Cabinet filling steel 4 drawer Drg No - FD-293

Material and labour for removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and Material and labour for applying two coats of 1st quality synthetic enamel paintwith spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Removing of unsv locks and providing new locks of size 50mm 4 lever with brass lever and steel casing and stainless steel keys in duplicate for cabinet filling with four side drawer complete all as specified and as directed by Engr-in-Charge

Cabinet filling steel vertical type Drg No - TP

Material and labour for removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and Material and labour for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Removing of unsv locks and providing new locks of size 50mm 4 lever with brass lever and steel casing and stainless steel keys in duplicate for cabinet filling steel vertical type complete all as specified and as directed by Engr-in-Charge

Chair revolving PCH Drg No - PCH-7042, 7002D, 7031, 7041

Removing of unsv seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg.

Removing of unsv back and supply and fixing new back made out of 12mm thick plywood both sides commercial type upholstered with foam of 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The back to be fitted with nuts and bolts (Screws) of required size as per drg.

Material and labour for gas welding of chair revolving wherever required complete all as specified and as directed by Engr-in-Charge

Removal of unsv PVC wheel supply and fixing new PVC wheel best quality and approved by GE.

Removal of unsv arms Supply and fixing new arms PVC best quality and approved by GE.

Chair PCH fixed Drg No - PCH-7044R, 7004D, 7042T, 7002, 7004, 7001, 7034, 7032, 7033

Removing of unsv seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg.

Removing of unsv back and supply and fixing new back made out of 12mm thick plywood both sides commercial type upholstered with foam of 32 density x 50 mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The back to be fitted with nuts and bolts (Screws) of required size as per drg..

Material and labour for gas welding of chair revolving wherever required complete all as specified and as directed by Engr-in-Charge

Removal of unsv arms Supply and fixing new arms PVC best quality and approved by GE.

Chair conference Drg No - PCH-7003D

Removing of unsv seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg.

Removing of unsv back and supply/fixing new back made out of 12mm thick plywood both sides commercial type upholstered with foam of 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The back to be fitted with nuts and bolts (Screws) of required size as per drg..

Material and labour for gas welding of chair revolving wherever required complete all as specified and as directed by Engr-in-Charge

Removal of unsv arms Supply and fixing new arms PVC best quality and approved by GE.

Chair 5 prong with arm of computer Drg No - GE(K) FD-64/84, FD/E6/MAP/01

Removing of unsv seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg.

Removing of unsv back and supply and fixing new back made out of 12mm thick plywood both sides commercial type upholstered with foam of 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The back to be fitted with nuts and bolts (Screws) of required size as per drg.

Material and labour for gas welding of chair revolving wherever required complete all as specified and as directed by Engr-in-Charge

Removal of unsv PVC wheel supply and fixing new PVC wheel best quality and approved by GE.

Removal of unsv arms Supply and fixing new arms PVC best quality and approved by GE.

Chair 5 prong revolving without arms GE(K) FD-52/88

Removing of unsv seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg.

Removing of unsv back and supply and fixing new back made out of 12mm thick plywood both sides commercial type upholstered with foam of 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The back to be fitted with nuts and bolts (Screws) of required size as per drg..

Chair Executive Revolving High Back Drg No - PCH-7001D

Removing of unsv seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg.

Removing of unsv back and supply and fixing new back made out of 12mm thick plywood both sides commercial type upholstered with foam of 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The back to be fitted with nuts and bolts (Screws) of required size as per drg..

Material and labour for gas welding of chair revolving wherever required complete all as specified and as directed by Engr-in-Charge

Removal of unsv PVC wheel supply and fixing new PVC wheel best quality and approved by GE.

Removal of unsv arms Supply and fixing new arms PVC best quality and approved by GE.

Chair Visitor Drg No - TP

Removing of unsv seat and supply and fixing new seats made out of 12mm thick plywood both sides commercial uphostered with foam of 32 density x 50mm thick covered with tapestry cloth of approved by GE. Tapestery cloth prices not less than 350 per Rm apply as per best trade practice to be fitted with MS screws with nuts and bolts (Screws) of required size of seats as per drg complete all as specified and as directed by Engr-in-Charge

Removing of unsv back and supply and fixing new back made out of 12mm thick plywood both side commercial uphostered with foam 32 density x 50mm thick covered with tapestry cloth of approved quality of prices and range 350 per RM apply as per trade practicle to be fitted with Ms screws with nuts and bolts of required size of back complete all as specified and as directed by Engr-in-Charge

Material and labour for gas welding of chair revolving wherever required complete all as specified and as directed by Engr-in-Charge

Removal of unsv arms Supply and fixing new arms PVC best quality and approved by GE.

Chair Auditorium Drg No - TP

Removing of unsv seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg complete all as specified and as directed by Engr-in-Charge

Removing of unsv back and supply and fixing new back made out of 12mm thick plywood both side commercial uphostered with foam 32 density x 50mm thick covered with leatherite rexian cloth of approved quality of prices range not less than 450 per RM apply as per trade practicle to be fitted with MS screws with nuts & bolts of required size of back complete all as specified and as directed by Engr-in-Charge

Material and labour for gas welding of chair auditorium wherever required complete all as specified and as directed by Engr-in-Charge

Removal of unsv PVC arms Supply and fixing of new PVC arms best quality and approved by GE.

Material and labour for PVC beading of chair auditorium wherever required of pvc beading and replacement of new pvc beading best quality and approved by GE.

Chair sitting Drg No- PCH-7003

Removing of unsv seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg.

Removing of unsv back and supply and fixing new back made out of 12mm thick plywood one sides commercial uphostered with 32 density x50mm thick covered with leatherite rexin cloth of approved by GE. Tapestery cloth prices not less than 350 per RM apply as per best trade practice to be fitted with MS screws with nuts and bolts (Screw) of required size of back as per drg.

Removing of unsv PVC wheel Supply and fixing new wheel best quality approved by GE.

Removing of unsv arms Supply and fixing new arms of chair best quality and approved by GE.

Material and labour for gas welding of chair PCH model wherever required complete all as specified and as directed by Engr-in-Charge

Chair cushion with arms for classroom Drg No - TP

Removing of unsv seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg.

Removing of unsv back and supply and fixing new back made out of 12mm thick plywood one sides commercial uphostered with 32 density x50mm thick covered with leatherite rexin cloth of approved by GE. Tapestery cloth prices not less than 350 per RM apply as per best trade practice to be fitted with MS screws with nuts and bolts (Screw) of required size of back as per drg.

Removing of unsv arms Supply and fixing new arms for chair of best quality and as approved by Engr-in-charge.

Material and labour for gas welding of chair PCH model wherever required complete all as specified and as directed by Engr-in-Charge

Table conference Drg No- TP

Removing unsv/broken Leg and providing new leg made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polishing table conference completely all as shown on drawing and as specified and as directed by Engr-in-Charge

Removing unsv/broken rail and providing new rail made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polishing table conference completely all as shown on drawing and as specified and as directed by Engr-in-Charge

Replacement of unsv top from table conference and providing new top made out of 18 mm thick pre laminated MDF board (medium density fibre board) confirming to IS 3087-1985 and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Table T-8/T-9/ Table sunmica top/ Table T-400/Round Table 900mm/ Table T/ Table TL-104/ Table TL-401/ Table T-261/ Table WT-718

Removing of unsv locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for TableT-8/T-9/T-400/TL-104/TL-401/T-261/T-WT-718 complete all as specified and as directed by Engr-in-Charge

Replacement of unsv top from the above tables and providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-1985 and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg complete all as specified and as directed by Engr-in-Charge.

Removing of unsv/broken handles and providing new handle steel chromium plated for TableT-8/T-9/T-400/TL-104/TL-401/T-261/T-WT-718 complete all as specified and as directed by Engr-in-Charge.

Over Bed Table Drg No- KA-3330

Replacement of unsv top of over bed table and providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-1985 and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Removal of unsv PVC wheel supply and fixing new PVC wheel best quality and approved by GE.

Sofa single seater Drg No-FD-258/281/373

Material and labour for removing the existing unserviceable tapestry cloth, cushion of sofa set and replacing with new tapastry cloth including marking cloth with foam cushion 40 density 100mm thick of size 530mm x 560mm x 100mm, Make -Kurl-on, Sleepwell, Springwell etc rest all as shown on drg and as directed by Engr-in-Charge. Note :- (i) Each cushion for seat or back will be measured as single unit. (ii) The tapastry cloth shall be of mat finish and shall not less than Rs. 350/- per metre and as approved by Engr-in-Charge.

Material and labour for removing the existing unserviceable front leg from Sofa and providing new first class teak wood of leg size 70mm x 35 mm x 300mm, rest all as shown on drg and as directed by Engr-in-Charge.

Material and labour for removing the existing unserviceable rear leg from Sofa and providing new first class teak wood of leg size 70mm x 35 mm x 300mm, rest all as shown on drg and as directed by Engr-in-Charge.

Material and labour for removing existing unserviceable Arm rest from Sofa and providing new first class teak wood Arm Rest of size 35mm x 70mm x 725mm, rest all as shown on drg and as directed by Engr-in-Charge.

Material and labour for removing existing unserviceable side rail from Sofa single seater and providing new first class teak wood side rail of size 35 mm x 100mm x 725mm, rest all as shown on drg and as directed by Engr-in-Charge.

Material and labour for removing existing unserviceable front rail from Sofa three seater and providing new first class teak wood front rail of size 35mmx 100mm x 1590 mm, rest all as shown on drg and as directed by Engr-in-Charge.

Material and labour for Removing existing unserviceable front rail from Sofa two seater and providing new first class teak wood front rail of size 35mmx 100mm x 1060 mm, rest all as shown on drg and as directed by Engr-in-Charge.

Material and labour for removing existing unserviceable front rail from Sofa single seater and providing new first class teak wood front rail of size 35mm x 10mm x 530 mm, rest all as shown on drg and as directed by Engr-in-Charge.

PVC Shoes shall be provided for sofa set legs of approved Make and Quality complete all as specified and as directed by Engr-in-Charge

Examination steel couch with/without drawer Drg No-KB-1170, KB-1180

Removing of unsv cushion from couch and supply and fixing new cushion of size (2100x560x100mm) made out of 12mm thick plywood one side commercial uphostered with 32 density x100mm thick covered with rexin as approved by GE fitted with MS screws with nuts and bolts (Screw) of required size of seat as per drg. Note : Single cushion of the required size should be provided to the examination couch

Removing of unsv drawer and Supply and fixing drawer made of 20 gauge MS Sheet duly finished with standard workmanship for examination couch including preparation of surface & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified, directed and shown on drgs.

Supply and fixing MS Lock (6 lever brass levers) with duplicate keys for drawers/shutters,complete all as specified, directed and shown on drgs.

Material and labour for preparation of steel surafce of examination couch applying two coats of synthetic enamel paint shade as approved over a coat of steel primer complete all as specified and as directed by Engneer-In-Charge.

Patient examination stool with out back Drg No - TP

Removing of unsv seat, supply and fixing new seat made out of 12mm thick plywood both sides commercial type upholstered with foam 32 density x 50mm thick covered with tapestry cloth as approved by GE. Tapestery cloth price not less than 350 per RM. The seat to be fitted with nuts and bolts (Screws) of required size as per drg.

Material and labour for preparation of steel surfaces applying two coats of synthetic enamel paint and over coat of steel primer complete all as specified shown on drg.

Desk Drg No - TP

Removing of unservicable top from desk & providing and fixing with new top made out of prelaminated MDF board 18mm thick all as specified and shown on drg complete all as specified and as directed by Engr-in-Charge

Removing of unservicable bottom from desk & providing and fixing with new bottom made out of prelaminated MDF board 18mm thick all as specified and shown on drg. complete all as specified and as directed by Engr-in-Charge

Removing of unservicable side from desk & providing and fixing with new side made out of prelaminated MDF board 18mm thick all as specified and shown on drg complete all as specified and as directed by Engr-in-Charge

Removing of unsv back plywood from desk & providing and fixing new plywood 6mm thick BWR grade & french polishing complete all as specified and as directed by Engr-in-Charge

Work Desk for microscope Drg No - TP

Removing of unservicable top from work desk & providing and fixing with new top made out of 1st class hardwood teakwood all as specified and shown on drg.

Removing of unservicable bottom from work desk & providing and fixing with new bottom made out of made out of 1st class hardwood teakwood all as specified and shown on drg.

Removing of unservicable side from desk & providing and fixing with new side made out of 1st class hardwood teakwood all as specified and shown on drg.

Removing of unserviceable back from desk & providing and fixing new back made out of 1st class hardwood teakwood all as specified and shown on drg .

Receptacle small/large with bucket Drg No - FD-1045

Removing old parts of receptical and refixing the same by welding after proper denting complete all as per specified .Note: Cost of repair reveting and pins etc shall be deemed to be included in the quoted rates.

Material and labour for painting external surface of the receptacle with two coats of aluminium paint over a coat of primer including the preparation of the surface complete all as specified and as directed by Engr-in-Charge

Book Case (special type) Drg No - FD-45/237

Removing of unservicable top from book case & providing and fixing with new top made out of prelaminated MDF board 18mm thick all as specified and shown on drg.

Removing of unservicable side from book case & providing and fixing with new side made out of prelaminated MDF board 18mm thick all as specified and shown on drg.

Removing of unservicable shelf from book case & providing and fixing with new shelf made out of prelaminated MDF board 18mm thick all as specified and shown on drg.

Removing of unservicable shutter from book case & providing and fixing with new shutter made out of prelaminated MDF board 18mm thick all as specified and shown on drg complete all as specified and as directed by Engr-in-Charge

Removing of unsv back plywood from book case & providing and fixing new plywood 6mm thick BWR grade & providing 4mm thick teak wood beading for wherever necessary & french polishing complete all as specified and as directed by Engr-in-Charge

Removing of unservicable leg frame from book case & providing with new leg frame made out of 1st class hard wood teak & including french polishing complete all as specified and shown on drawing complete all as specified and as directed by Engr-in-Charge

Almirah mess utensil Drg No - FD-93

Removing of unservicable shelf of size (1025x420x19mm) from almirah mess utensil & providing and fixing new shelf of the same size made out of 1st class hard wood indian seasoned teak wood all as specified and shown on drg.

Removing of unservicable shelf of size (1025x270x19mm) from book case & providing and fixing new shelf of the same size made out of 1st class hard wood indian seasoned teak wood all as specified and shown on drg.

Removing of unsv back plywood from almirah mess utensil & providing and fixing new plywood 6mm thick BWR grade & providing 4mm thick teak wood beading for wherever necessary & french polishing complete all as specified and as directed by Engr-in-Charge

Removing of unservicable shutter from almirah mess utensil & providing and fixing with new shutter made out of prelaminated MDF board 18mm thick all as specified and shown on drg complete all as specified and as directed by Engr-in-Charge

Chair Dinning with cushion Drg No - FD/E6/MAP/10

Removing of unsv/broken Rear Leg and providing new legs made out of 1st class hard wood indian seasoned teak wood including tightening of seat frame and fixing of joint with glue and suitable bamboo pins duly french polish complete all as specified and as directed by Engr-in-Charge

Removing of unsv/broken front leg and providing new legs made out of 1st class hard wood indian seasoned teak wood including tightening of seat frame and fixing of joint with glue and suitable bamboo pins duly french polish complete all as specified and as directed by Engr-in-Charge

Removing of unsv/broken stiffner and providing new stiffners made out of 1st class hard wood indian seasoned teak wood including tightening of seat frame and fixing of joint with glue and suitable bamboo pins duly french polish complete all as specified and as directed by Engr-in-Charge.

Removing of unsv/broken back rest and providing back made out of 1st class hard wood indian seasoned teak wood including tightening of seat frame and fixing of joint with glue and suitable bamboo pins duly french polish complete all as specified and as directed by Engr-in-Charge.

Removing of and supply and fixing of the unserviceable cushion of chair dinning long back with cushion and providing new cushion 50mm thick 32 density & covered with new tapestry cloth costing not less than Rs. 250/- per RM over the white kora cloth duly stiched to chair dinning long back with cushion as per drawing.

Stool dressing with cushion Drg No- FD/E6/MAP/14

Supply and fixing of unserviceable cushion sheet 32 density duly covered with leatherite uphostering of quality and top shall be 12mm thick phenal bonded plywood complete all as specified and as directed by Engr-in-Charge

Removing unsv/broken Leg and providing new leg made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish complete all as specified and as directed by Engr-in-Charge

Removing unsv/broken rail and providing new rail made out of 1st class hard wood indian seasoned teak wood and fixing of joint with glue and suitable bamboo pins duly french polish complete all as specified and as directed by Engr-in-Charge

Preparation wooden surfaces by rubbing with sandpaper and applying one coat of french polish complete all as specified and as directed by Engr-in-Charge

Trolley for TV Drg No - FD/E6/MAP/04

Removing of unsv/broken glass shutter from TV Trolley and providing/fixing new sliding door shutter(double leaf)made out of acrylic transparent sheet 5mm thick fixing with two way aluminium channel 1mm thick all round including two Nos runner wheels and one Nos chromium plated knob to each shutter as directed by the Engr-in-Charge. All as shown in drg No FD/E6/MAP/04

Removing of unsv/broken bottom from TV Trolley and providing new bottom made out of 18mm thick prelaminated MDF board exterior grade fixing with glue and metal screws to TV Trolley as directed by Engr-in-Charge as specified and shown on drg No FD/E6/MAP/04.

-Ditto- all as per item No 36.02 of Sch 'A' herein before but for Top of TV Trolley all as shown in drg No FD/E6/MAP/04.

-Ditto- all as per item No 36.02 of Sch 'A' herein before but for side of TV Trolley all as shown in drg No FD/E6/MAP/04..

-Ditto- all as per item No 36.02 of Sch 'A' herein before but for back of TV Trolley all as shown in drg No FD/E6/MAP/04..

Removing of unsv/broken castors from TV Trolley and providing and fixing new castors complete all as specified and as directed by Engr-in-Charge shown in drg No FD/E6/MAP/04.

Chair Writing Drg No - FD-250/280

Removing of unsv/broken rear leg and providing/fixing new leg made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins & duly french polishing chair writing completely all as shown on drg and as specified.

Removing of unsv/broken front leg and providing/fixing new leg made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins & duly french polishing chair writing completely all as shown on drg and as specified.

Removing of unsv/broken back rest and providing/ fixing new back rest made out of 1st class hardwood teakwood duly French polishing chair writing completely all as shown on drg and as specified.

Removing of unsv/broken stiffener and providing/fixing new stiffener made out of 1st class hardwood teakwood duly french polishing chair writing completely all as shown on drg and as specified.

Removing of unsv/broken front/rear rail and providing/fixing new front/rear rail made out of 1st class hardwood teakwood including drilling of Cane holes duly french polishing chair writing completely all as shown on drg and all as specified.

Removing of unsv/broken side rail and providing/fixing new side rail made out of 1st class hardwood teakwood including drilling of Cane holes and duy french polishing chair writing completely all as shown on drg and all as specified.

Removing of unsv/broken arms rest and providing/fixing new arm rest duly shaped & made out of 1st class hardwood teakwood and duly french polshing chair writing completely all as shown on drg and as specified.

Chair dining Drg No - FD-228/279

Removing of unsv / broken rear legs and providing/fixing new legs made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins duly french polishing chair dining completely all as shown on drg and as specified.

Removing of unsv / broken front legs and providing/fixing new legs made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins duly french polishing chair dining completely all as shown on drg and as specified.

Removing of unsv broken back rest and Providing/ fixing new back rest and duly french polishing chair dining completely all as shown on drg and as specified.

Removing of unsv/ broken stiffeners and providing/fixing new stiffner made out of 1st class hardwood teakwood and duly French polishing chair dining completely all as shown on drg and all as specified.

Removing of unsv/broken front/rear rails and providing/fixing with new front/rear rails made out of 1st class hardwood teakwood including drilling of Cane holes and duly french polishing chair dining completely all as shown on drg and all as specified.

Removing of unsv/broken side rails and providing/fixing with new side rail made out of 1st class hardwood teakwood including drilling of Cane holes and duly french polishing chair dining completely all as shown on drg and all as specified.

Chair Easy Drg No - FD-229

Removing of unsv / broken rear legs and providing/fixing new legs made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins and duly french polishing chair easy completely all as shown on drg and as specified.

Removing of unsv / broken front legs and providing new legs made out of 1st class hardwood teakwood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins and duly french polishing chair easy completely all as shown on drg and as specified.

Removing of unsv/broken arms rest and providing/fixing with new arm rest made out of 1st class hardwood teakwood duly shaped and duly french polishing chair easy completely as shown on drg and as specified.

Removing of unsv/broken frame of seat back frame and providing/ fixing with new frame made made to shape out of 1st class hardwood as per drg including drilling of cane holes @ 12.5 mm c/c for chair easy duly French polishing chair easy completely all as shown on drg and as specified.

Removing of unsv/ broken front/rear rails and providing/ fixing with new rail made out of 1st class hardwood including drilling of cane holes and duly french polishing chair easy completely all as shown on drg and as specified.

Removing of unsv/broken side rails and providing/fixing with new rail made out of 1st class hardwood including drilling of Cane holes for chair Easy & duly French polishing completely all as shown on drg and all as specified.

Bed with Plywood TopDrg No - FD-246

Removing of unsv plywood from head rest and providing/fixing new plywood 3.5mm thick one side teak veneered and teak wood beading all around for head rest of bed plywood duly french polished all as shown on drg and as specified.

Removing of unsv plywood from foot rest and providing/fixing new plywood 3.5mm thick one side teak veneered and teak wood beading all around for foot rest of bed plywood duly french polished all as shown on drg and as specified.

Removing of unsv/ broken long rail and providing/fixing new long rail made out of timber 1st class hard wood to bed plywood duly french polished all as shown on drg and as specified.

Removing of unsv/ broken Short rail and providing/fixing new short rail made out of timber 1st class hard wood to bed plywood duly french polished all as shown on drg and as specified.

Removing of unsv/broken plywood from bed and providing new plywood of commercial type 12mm thick 7 ply (MR Grade not less than Rs 100 per sqft) and conforming to IS 303 of 1975 to bed ply wood top and all as specified and shown on drg. Also brackets of specified shape & size to be provided at all four corners of the bed.

Table writing FD-33(M)/275

Replacement of unsv top of Table writing and providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-1985 and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Removing of unservicable drawer from table writing & providind/fixing with new drawer with knob of good quality made out of prelaminated MDF board 18mm thick & including french polishing complete all as specified and shown on drg.

Removing of unservicable leg frame from table writing & providing with new leg frame made out of 1st class hard wood teak & including french polishing complete all as specified and shown on drawing

Table office clerk steel FD-84(M)/10

Replacement of unsv top of Table office clerk steel and providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-1985 and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Supply and fixing in repairs drawers made of 20 gauge MS Sheet duly finished with standard workmanship for Table Office Clerk Steel including preparation of surface & applying two coats of synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete all as specified, directed and shown on drgs.

Supply and fixing MS Lock (6 lever brass levers) with duplicate keys for drawers/cup-board, as per approved sample & as directed by Engr-in-charge.

Material and labour for spot welding of broken joints 25mm to 75mm after preparation of surface & applying two coats of shade as approved synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete all as specified, directed and shown on drgs.

Supply and fixing in repair to leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint over two coats of red oxide primer complete all as specified, directed and shown on drgs.

Supply and fixing to Hard Rubber/PVC toe of superior quality as approved & as directed by Engr-in-charge.

Material and labour for removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and Material and labour for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Table office officers steel FD-84(M)/10

Replacement of unsv top of Table office officers steel and providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-1985 and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Supply and fixing in repairs drawers made of 20 gauge MS Sheet duly finished with standard workmanship for Table Office Officers Steel including preparation of surface & applying two coats of synthetic enamel paint with spray gun in two shades over one coat of red oxide primer complete all as specified, directed and shown on drgs.

Supply and fixing MS Lock (6 lever brass levers) with duplicate keys for drawers/cup-board,complete all as specified, directed and shown on drgs.

Material and labour for spot welding of broken joints 25mm to 75mm after preparation of surface & applying two coats of shade as approved synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete all as specified, directed and shown on drgs.

Supply and fixing Leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint over two coats of red oxide primer complete all as specified, directed and shown on drgs.

Supply and fixing Hard Rubber/PVC toe of superior quality as approved & as directed by Engr-in-charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and Material and labour for applying two coats of 1st quality synthetic enamel paint shade as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Table with/without Drawer Steel (900 x 600 x 760 mm) FD-1007/1008

Removal of existing worn out painting from in side & outside including preparation of surface frame and Material and labour for applying two coats of 1st quality synthetic enamel paint shade as approved over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge.

Supply and fixing in repairs to top of Table with/without Drawer Steel with 18mm thick prelaminated MDF board one side teak facing and balancing white on other side all the four edges provided with 4mm thick first class teak wood beading, rest all as shown on drg and as directed by Engr-in-Charge.

Table centre two tier FD-225/274

Replacement of unsv top of Table center two tier and providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-1985 and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Table Computer FD/E6/MAP/03

Replacement of unsv top of Table computer and providing new top made out of 18 mm thick pre laminated MDF board confirming to IS 3087-1985 and 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Removing of unsv telescopic channel from key board of table computer and providing/fixing new telescopic channel (12"/16''/18'')as required of superior quality to key board of table compuer all as specified and shown of drg.

Removing of unsv lock from drawer of table computer and providing/fixingnew multipurpose brass lock of superior quality with duplicate brass keys to drawer of table computer all as specified and shown on drg.

Material and labour for spray painting with two coat synthetic enamel paint with spray gun in two shades after applying sand papering of steel surfaces on fwg items :

Almirah large steel with shelves & 1/2H 1/2S Drg No - DGS&D, FD-67, FD-1031, FD-1033, FD-1037 : Material and labour for removal of existing worn out paint from in side & outside including preparation of surface frame completelyly and Material and labour for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Almirah medium steel with shelves Drg No- DGS&D, FD-243/1032 : Material and labour for removal of existing worn out paint from in side & outside including preparation of surface frame completely and Material and labour for applying two coats of 1st quality synthetic enamel with spray gun in two shades shade as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Locker steel Drg No - FD-257/1029 : Material and labour for removal of existing worn out paint from in side & outside including preparation of surface frame completely and Material and labour for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Locker Steel Double Shutter with Independent Locking Device Drg No- TP :- Material and labour for removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and Material and labour for applying two coats of 1st quality synthetic enamel paint of smoke grey shade over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Book shelf open large steel Drg No- FD-69 : Material and labour for removal of existing worn out paint from in side & outside including preparation of surface frame completely and Material and labour for applying two coats of 1st quality synthetic enamel paint shade as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Book shelf open small steel Drg No- FD-69 : Material and labour for removal of existing worn out paint from in side & outside including preparation of surface frame completely and Material and labour for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Book case steel Drg no- FD-90/1028 : Material and labour for removal of existing worn out paint from in side & outside including preparation of surface frame completely and Material and labour for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Cabinet filling steel 4 drawer Drg No - TP, DGS&D, GE (K) FD-35/86 :Material and labour for removal of existing worn out paint from in side & outside including preparation of surface frame completely and Material and labour for applying two coats of 1st quality synthetic enamel paint with spray gun in two shades as approved over a coat of red oxide primer,complete all as specified, directed and shown on drgs.

Almirah large steel w/s & 1/2Sx1/2H Drg No - DGS&D, FD-67/1031/1033 Repair/Removing of unsv legs and providing new legs made out of 18 guage MS black sheet duly painted with two coat Synthetic enamel paint with spray gun in two shades over a coat of red oxide primer and welding to Almirah large steel with shelves & 1/2H 1/2S.

Almirah medium steel with shelves Drg No - DGS&D, FD243/1032 Repair/Removing of unsv legs and providing new legs made out of 18 guage MS black sheet duly painted with two coat Synthetic enamel paint with spray gun in two shades over a coat of red oxide primer and welding to Almirah Medium steel with shelves complete all as specified and as directed by Engr-in-Charge.

Locker Steel Drg No - FD-54/257/1029/127 & DGS&D Repair/Removing of unsv legs and providing new legs made out of 18 guage MS black sheet duly painted with two coat Synthetic enamel paint with spray gun in two shades over a coat of red oxide primer and welding to Locker steel complete all as specified and as directed by Engr-in-Charge.

Table office offrs/clerk steel Drg No - DGS&D, FD-84, GE (K) FD-4/83 Removing unsv drawers and Providing new drawer made out of 20G thick MS sheets to table office offrs/clerk steel all as specified and given in drg

Almirah large/medium steel with shelves, Book case steel & Locker steel Drg No - DGS&D, FD-67/54/243/257/1029/1031/1032/90/1028 Removing of unsv locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for almirah large/medium steel with shelves, 1/2H, 1/2S, Book case steel & Locker steel complete all as specified and as directed by Engr-in-Charge

Almirah large/medium steel with shelves, Book case steel & Locker steel Drg No - DGS&D, FD-67/54/243/257/1029/1031/1032/90/1028 Removing of unsv/broken handles and providing new handle steel chromium plated for almirah large/medium steel with shelves, 1/2 H 1/2S & locker steel complete all as specified and as directed by Engr-in-Charge

Almirah large/medium steel with shelves, Book case steel & Locker steel Drg No - DGS&D, FD-67/54/243/257/1029/1031/1032/1033/90/1028 Removing of unsv hinges and providing new steel hinges and welding to door shutters of almirah large/medium steel with shelves, 1/2 H 1/2S & locker steel complete all as specified and as directed by Engr-in-Charge

Almirah large/medium steel with shelves Drg No - DGS&D, FD-67/243/1031/1032 Repair/Removing of unsv shelves, of Almirah large/medium steel with shelves and making new shelves out of 20 guage black MS sheet duly painted with 2 coats synthetic enamel paint with spray gun in two shades over a coat of red oxide primer as required at site and providing with necessary cleats/bolts & nuts complete all as specified and as directed by Engr-in-Charge

Cot DT steel with plywood top Drg No- GE (K) FD-41/86 : Removing of old unserviceable plywood from cot DT steel with plywood top and supply and fixing plywood of 12mm thick,7 ply, commercial type, (MR Grade not less than Rs 100 per sqft) and MS angle of size 25x25x5mm shall be fixed & welded as a middle span which should match with top to fix plywood without leaving gap and MS plate iron cleats 10 Nos of size 25x5x60mm made to shape and fixed to both type of rails (02 Nos each rails) by welding as directed by Engineer-In-Charge Note:- Angle (Middle spn) and flat (Cleats) iron should have proper holes to fix plywood on top with (30x5mm) size nuts and bolts with washer and all steel section shall be painted with two coats of synthetic enamel paint smoke Grey over a coat of steel primer.

Charpoy GI pipe with plywood top Drg No - FD-220

Removing unserviceable Ply top from GI charpoy, tightening complete charpoy ie loose checknuts,elbows,Long Rails and short Rails and supply and fixing ply wood of 12mm thick, 7 Ply ,commercial Type,(MR Grade not less than Rs 100 per sqft) ISI Marked of size 1980x900mm complete all as specified and directed

Material and labour Removing old unserviceable long rail from GI charpoy and supply and fixing new long rail of size 1884mm long made out of 32 mm bore medium grade GI Pipe duly threaded on both ends and fixing to charpoy completely all as specified and as directed by Engineer-in-charge. Note ;- 1)The items includes threading both sides in new long rail and 2) Old unserviceable long rail obtained shall be reused in Item No 58.03 below.

Material and labour for removing old unserviceable short rail from GI charpoy and fixing new short rail of size 814mm long made out of long rails retrieved vide items No 58.02 herein duly threaded on both endSupply and fixing ixing to charpoy completely all as specified and directed.Note ;- 1) The items includes threading both sides in new short rail & 2) Old unserviceable short rail obtained shall be reused in Item No 58.04 below.

Material and labour for removing old unserviceable legs from GI Charpoy and fixing new legs of size 394 mm long made out of short Rails retrieved vide item No 58.03 herein duly threaded on one end including 3mm thick MS sheet( made to shape of the bottom) in bottom and two Nos clamps as shown on Drg by welding completely all as specified and directed by Engr In Charge

Material and labour for removing old unserviceable three way elbow and supply and fixing new elbow 32 mm bore (ISI marked) to GI charpoy, complete all as specified and as directed by Engineer-in-charge.

Material and labour for removing old unserviceable check nuts and supply and fixing new check nuts 32 mm bore 6mm thick to GI Charpoy, all as specified and as directed by Engineer-in-charge.

Material and labour for removing old unserviceable legs from GI charpoy and fixing new leg of size 394 mm duly threaded one end and including 3 mm thick MS Sheet ( made to shape at the bottom) in bottom two nos clamps ( as shown in drawing) by welding completely all as specified and directed by Engineer-in-charge

Material and labour for spray painting with two coat synthetic enamel paint with spray gun in two shades after applying sand papering of steel surfaces on fwg items :

Rack Adj. 3 Tier Slotted Angle 7200 x 900 x 300 mm Drg No - TP

Rack Open Steel on Slotted Angle Drg No - TP

Rack Side Steel 660 x 300 x 680 mm Drg No - TP

Rack Side Steel 4 Space Drg No - FD-97

Rack Side Steel W/ 3 Shelves Seprate Computer Tray Drg No - FD-97

Rack side steel with tray (685 x 255 x 760mm) Drg No - FD-97

Rack Steel 2500 x 900 x 650 mm Drg No - GE(K)FD-94/92

Rack steel 1830 x 760 x 1905 mm Drg No - FD-129

Rack Steel 1830 x 915 x 450 mm Drg No - SK-513

Rack steel Adj 710 x 900 x 375 mm Drg No - TP

Rack Steel Adj Shelving Angle Post Open Type 2209 x 914 x 457mm Drg No - TP

Rack Steel Adj. 1875 x 900 x 300 mm Drg No - TP

Rack Steel Adj. 6 Tier Drg No - FD-106

Rack Steel Adj. Angle Post Closed Type Drg No - FD-106(M)

Rack Steel Adjustable w/8 Shelves Drg No - TP

Rack Steel For Document 1905 x 915 x 400 mm Drg No - FD-106

Rack steel Open 915 x 710 x 305 mm Drg No - FD-97

Rack steel Storage With 4 Shelves Making 3 Compartment Drg No - DGS&D

Rack Steel With Slotted Angle but 5 Slots Drg No - TP

Rack Steel With Slotted Angle Open Drg No - TP

C S Sharma and Co

Unity Enterprises

SHREE JAGDISH FURNITURE CO.