Construction of Boundary Wall and Toilets of SKM Government College for Women, Kalayat (Kaithal) (Providing E.I. and High Mast only).

Amount

( a ) Main Switches

31.12 Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections .

31.12 (a) (v) Cat-B Double pole switch 32 amp. 415 Volts,

31.12(a)(xxvii) Cat-B Four pole change over switch 300/320 amp. 415 Volts

31.12 c (i) 15 amp.to 60 amp. 415 V ,10 KA 3-phase

31.13 Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide.

31.13(ii) Size 40 mm x 40 mm x 6 mm.

31.14 M.S.Sheet .

31.14 (i) Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

31.17 Supply and erection of miniature circuit breaker isolator 240 /415 V in the existing distribution board including making necessary connections.

(a) Miniature circuit breakers of 9 KA breaking capacity

31.17a) (ii) SP MCB of 9 KA breaking capacity 6 amp. to 32 amp.

31.17(a) (ii) SPN MCB of 9 KA breaking capacity 6 amp. To 32 amp.

31.18 Supply and erection of Fittings and Accessories.

31.18 (xi) Bakelite angle / straight button holder large size.

31.18 (xxvi) Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms, 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job

Pipe Laying.

31.21 Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required

31.21 (xxi) Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed.

31.22 Earthing

31.22(i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required

31.22(ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

31.22 (xix) Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size.

31.26 Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections

31.25 (xI) Ard. 16 Sq. mm 4 Core Cable

31.26 (xviii) Ard. 95 Sq. mm 3 Core Cable

31.33 Supply and erection of Godrej Almirah type M.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars. The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides, at top and bottom, each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof. The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:-

31.33 (ii) M.S.pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1050 mm x 600 mm x 250 mm below ground level

31.36 Wiring in 1.5 sq.mm PVC Insulated Copper conductor cable in 1.6 mm thick conduit pipe

31.36 (I) Fan Point

(b) Medium Point

© Long point

31.36 (II) Light Point

(a) Short point

(b) Medium Point

© Long point

31.36 (VII) 3 pin 5 amp. plug point including earthing the 3rd. pin etc.

(a) Short point

© Long point

31.36 (VIII) 3 pin15 amp. plug point with 4 sq mm PVC insulated Copper conductor cable- including earthing the 3rd. pin etc.

© Long point

31.40 Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe

31.40 (i) Size 1.5 sqmm ( 3/0.81 )

31.40 (iii) Size 4 sqmm ( 7/0.85 )

31.41 Supply and erection of Double door sheet steel enclosure distribution boards suitable for MCB's & ELCB's recessed in wall including bonding to earth complete with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work.

31.41 (i) 4-way , SP&N ( Horizontal)

31.41 (v) 4-way , TP&N ( Horizontal) (8+12)

31.44 Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work.

31.44 (i) 20 mm dia.

31.55 Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Delux model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection etc. up to the entire satisfaction of the Engineer-in-Charge of the Work.

31.67 Supply and erection of mark double walled corrugated (DWC) HDPE pipe laid 1Mtr. Below ground level including diging and refilling of earth including cost of sutiable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

(i) HDPE pipe 63/50 mm outer dia/inner dia.

31.83 (iii) Supply, installation, Testing and commissioning of 20 Mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 9/12 Nos. Luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer-in-Charge

Thickness of Top Section = 3mm (Minimum) Bottom Section =4mm (Minimum)

Top Dia = 150mm Bottom Dia = 460mm

Thickness of Galvanization = Top = 65micron (Min.) Bottom = 85micron (Min.)

M.R. items

N.S. 1 S/E of T-5 Led 18 Watt 4' Feet Long ISI Complete in all respect Make - Phillips,Bajaj

N.S. 2 S/E of AC celing fan 48'' (1200mm complate with down rod complete in all respect upto the entire satisfaction make- orient/crompton

N.S. 3 S/E of Exhaust Fan 12" (300 mm sweep) ISI complete in all respect Make - Usha,Orient

N.S. 4 Supply and Errection of 250 Watt LED flood light fitting C&S Electric 250 W LED or equivalent specification of WIPRO/ Phillips / Havells make with pressure die cast aluminum housing,reflector and enclosed with toughned glass IP 65/ 66 with all accessories as supplied by the manufucture including cost of all labour material required to complete the job in all respect upto entire satisafaction of Enginner-in-Charge of the work

N.S. 5 Supply and Errection of 150 Watt LED flood light fitting C&S Electric 150W LED or equivalent specification of WIPRO/ Phillips / Havells make with pressure die cast aluminum housing,reflector and enclosed with toughned glass IP 66 with all accessories as supplied by the manufucture including cost of all labour material required to complete the job in all respect upto entire satisafaction of Enginner-in-Charge of the work

N.S. 6 Const. of RCC foundation for 20 Mtr. High mast complete in all respert as per the appended design including the cost of digging sand filling 6" lean concreat 1:8:16 / bricks souling bar binding cement concret shuttering, fixing of foundation botls, refilling, carrying and erection of High mast on foundation incluidng petty material to complete the job in all respect up to the entire satisfaction of engineer-in Charge of work.

N.S. 7 S/E of 32/2 Amp. 3 Phase automatic time switch of L&T make alongwith contractor of required capcaity of L&T make movement controlled by precisaty oscilation operation on main suply of contuine to eun on built in rechargable nickel cadium cell for 150 hours in the event of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work.

N.S. 8 S/E of 0.3 KVA capacity inverter with SMF baery for avialtion light in existing including the cost of labour charges and connections and petty material etc. for complete in all respct. Make of invertor - Lumineous/Microtek/Sukam Make of battery - Exide/ amron

Balraj Singh Contractor

tarsem chand jain

Rajesh Electric Works