NIT NO. 316/DURG(Rajnandgaon)/2026

NIT Schedule For B.T. Patch Repair of Various Roads at Somni, Surgi & H.Q. No.1 Section under Sub Division No. 1 PWD Rajnandgaon

S.O.R for Road work for C.G.P.W.D. Raipur in force form 15.06.2026 with upto date ammendment P.A.C 61.50 Lacs

S.No. SOR P/I.No. Particular's of Items Qty. Unit Rate Amount

1 4.6 Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406. 436.84 cum 1365 596283.87

2 5.2 Tack coat Providing and applying tack coat with bitumen emulsion (RS-1, grade confirming to IS:8887) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per clause 503.

(i) Bituminous surface @ 0.25 kg / Sqm 25301.80 sqm 13.00 328923.40

(ii) Granular surface treated with primes @ 0.30 kg / Sqm 4368.38 sqm 15.00 65525.70

3 5.1 Prime coat Providing and applying primer coat with oil based bitumen emulsion (SS-1, grade confirming to IS:8887) on prepared surface of granular base including clearing of road surface and spraying primer using mechanical means as per clause 502.

(i) on WBM / WMM surface @0.85 kg/ sqm. 4368.38 sqm 65.00 283944.70

4 5.21 Providing and laying leveling course / profile corrective course with bituminous macadam

With minimum 40-60 TPH capacity hot mix plant using crushed aggregates of Grading-1 premixed with bituminous binder @ 3.1% transported to site and laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clause-501.6 and 501.7 to achieve the desired compaction complete in all respect and as per relevant clause section 500.

B With mechanical paver finisher 281.67 cum 4562.00 1284995.00

5 5.12 Close Graded Premix Surfacing/Mixed Seal Surfacing Mechanical means using minimum 40-60 TPH capacity of HMP. Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness using bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade, complete as per clause 508.

II. With mechanical paver finisher

ii) Type B ( 13.2 mm to 0.09 mm size aggregates ) 29670.18 sqm 121.00 3590092.00

Total 6149764.67

Lacs in Say 61.50