Tender ID

Karnataka

Retender

Works

Buildings

CONSTRUCTION OF FOUR CLASSROOMS FOR GOVERNMENT PU COLLEGE AT CHINCHALI VILLAGE IN GADAG TQ/DIST.

Public Works Department

PWD Division Office Gadaga | Karnataka

Amount: ₹78.6 LCloses: 11 Feb 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published4 Feb 2025
Closed11 Feb 2025
Retendered4 Feb 2025

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 4 Feb 2025

Tender Value

₹78.6 L

EMD Value

₹1.6 L

Closing Date

11 Feb 2025, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

EE PWD GADAG

Office Number

Work Description

CONSTRUCTION OF FOUR CLASSROOMS FOR GOVERNMENT PU COLLEGE AT CHINCHALI VILLAGE IN GADAG TQ/DIST.

Tender Information

Tender ID

PWD/2024-25/BD/WORK_INDENT6032/CALL-2

Reference Number

PWD/2024-25/BD/WORK_INDENT6032/CALL-2

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Gadaga

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredAnnual Turnover Certificate UDIN is Mandatory in Turnover certifcate.

RequiredPresent Postal address and phone number of the Contractor is Complusory.

RequiredContractor PWD Registration Certificate

RequiredSatisfactorily completed as prime contractor, at least one similar work done certificate.

RequiredLOC should be preescribed formate-2,if not then the tender will not be accepted

RequiredBid capacity on the contractor letter head

RequiredQuantity wise workdone certificate.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of kppp portal due to internet connectivity issues and technical glitches at bidders end

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

Tender invited only for eligible contractors registered under Karnataka Public Works Dept

Conditional tenders will not be accepted.

The Tenderer shall obtain the workdone certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer)and scan the Original Certificate and attach the scanned file to the Bid.

Financial Year will be reckoned as the period between first day of April and Thiry first day of March of succeeding year(both days inclusive)

The Tenderer shall scan the Original Ownership Documents/ Lease/ Hire committement Agreement for the Machinery and attach the scanned file to the Bid. The Original Documents shall be produced at the time of opening of technical Bids for physical verification.

The tenderer shall note that the scanned Documents can also be uploaded in the tasks created under Document/Evidence Required from the Bidder

The Employer reserves the right to Reject any or all Tenders without assigning any reason

The Department is not responsible for any delay in accessing kpp portal

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2 : Instructions to Tenderers (ITT), will only be considered for evaluation.

All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.

The items quoted shall include cost of Royalty charges on constructive materials and other taxes as per the rates prevailing Govt Orders at the time of execution and including all the cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machinary and equipments, etc., complete and all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work.

Physical quantities requirement to qualify the Tenderer is 80% of the estimated quantity as per Govt Order No. .PW/630/CRM/2014 Bangalore Dated: 17-11-2014

Department will not supply any materials.

The cost of the Tender form shall not be refundable.

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PWD Division Gadag during office hours on all working days. It may be noted that if any of the dates mentioned above happened next working day will holds good in lieu of the dates mentioned.

Epayment Challan should be Scanned

The Tenderer must be present during opening of tender and submit uploaded documents duly attested by Gazzeted Officer not below the rank of Executive Engineer and also produce original documents for confirmation at the time of opening.

As per Karnataka State Govt Order No:LD/300/LET/2006/Bangalore Dt: 1-1-2007 and Govt Ltr No:PW/134/BMS/2007, Dt: 27-7-2007, a sum amounting to 1% of the bill amount will be deducted towards Construction Labour Welfare fund.

THE CONTRACTORS ARE INSTRUCTED TO SUBMIT ONLY RELEVENT INFORMATION WITH RECORDS AS REQUIRED AND SPECIFIED IN QUALIFICATION CRITERIA.ANY JUNK ,SURPLUS AND UNNECESARY DOCUMENTS IF UPLOADED WILL TREATED AS MISLEADING AND SUCH TENDERS ARE LIABLE TO BE REJECTION.

Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2024-25 in the Technical Qualification Criteria mentioned in the next section

The item rates are excluding 18% GST but inclusive of all other charges.

GST shall be paid to the tendered amount separately.

The Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delays as determined by the authority while granting the extension of time.

The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes (excluding GST) as per prevailing Government Orders

Work Completion/Execution Period : 11 Months

The Project Completion period is 11 months and the Tenderer should maintain work during the defect liability period, which is (1) one year after successful completion of the work.

Star rates are applicable, As per the Government Circular No. PWD 159 CRM 2009 Bangalore dated 30-9-2010

Bidder Should Carry out the Electrical works As per instruction of Site Eng of PWD and HESCOM . The bidder Should get the necessary approvals required for execution of electrical works from HESCOM dept & electrical inspector. Any necessary deposits & supervision charges will be borne by the department, if paid by the bidder it will be reimbursed.

All necessary arrangements shall be made and precaution taken to prevent completely or partially, damage to the structure or labours / employees during construction period. (As per recent Labour Act) Contractor shall be fully responsible for any damage to the structure during the construction and maintenance period.Any damage caused due to any reasons shall be rectified / replaced at his own cost as per the direction of Engineer in charge. Nothing shall be payable by the Department on account of inclusive of all such arrangements/ precautions work needed

Technical Criteria

Past Experience

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e.,2019-20,2020-21,2021-22,2022-23 and 2023-24 Satisfactorily completed as prime contractor, at least one similar work such as Construction of Building Works of value not less than Rs.39.29 lakhs

Work Done Certificate

Executed in any one year in the last five financial years(2019-20 to 2023-24) the following minimum quantities of work 1)Earth work/Embankment/Subgrade/Filling-565.52 Cum 2)Concrete work (Including PCC/RCC)-188.65 Cum 3)Steel-15.32 Tonne 4)Solid concrete blocks/BBM/UCR/SSM-101.74 Cum 5)Plastering-835.07 Sqm 6)Laying of tiles-321.88 Sqm 7)Wood work-0.84 Cum

Others -- Quantity wise work done certificate

List of existing commitments and ongoing works

Others -- List of existing commitments and ongoing works

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Others -- On letter head

Capabilities of Vendor

Tenderer who meet the above specified minimum qualifying criteria, will only be qualified,if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity-( AxNx2.5-B )whereA-Maximum value of civil engineering works executed in any one year during the last five years (updated to 2024-25 price level) taking into account the completed as well as works in progress.N -Number of years prescribed for completion of the works for which tenders are invited -0.916 Year.B-Value at 2024-25 price level, of existing commitments and on-going works to be completed during the next 0.916 year (Period of completion of the works for which tenders are invited)

Others -- calculation sheet on letter head

Assessed Tender Capacity shall be more than the Tendered Amount

Others -- Assessed Tender Capacity shall be more than the Tendered Amount

Maximum of Civil Engineering works executed in any one year during the last five years (updated to 2024-25 price level) taking into account the completed as well as works in progress. (Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2024-25)

Others -- Information on the Letter Head of the tenderer

Financial Status

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2019-20,2020-21,2021-22,2022-23 & 2023-24 3.2(a) acheived in at least two financial years an Average Annual financial turnover of Rs. 78.58 lakhs (in all classes of civil engineering construction works only) 33.( As per GOVT Circuler No PW 60 CRM 2021 Bangaluru Dtd-08-11-2021)

Audited CA Certificate of Annual Turnover

Value at 2024-25 price level, of existing commitments and on-going works to be executed during the next 12 months(Financial commitment of previous years shall be given a weight of 10% per year to bring them to the price level of the 2024-25), (Monthwise commitment shall be furnished).

Others -- Statement on the Letter head of the tenderer

The EMD of Rs.1,57,200.00 shall be paid in full through e-payment or in two parts i.e,Part(1)Rs. 50,000 by e-payment part (2)1,07,200.00 in the form of BG to be upload.

Others -- EMD Details

Annual Financial Turnover Certifcate for the last fve years i.e from 2019-20 to 2023-24, UDIN is Mandatory in Turnover certifcate.

Audited CA Certificate of Annual Turnover

Liquid assets and /or availability of credit facilities of no less than Rs. 23.58 Lakhs (estimated cash flow for 3 months of peak construction period)

Line of Credit

Others

Banker Details for reference

Others -- Banker Details for reference

Information on litigation in which the Tender is involved.

Others -- Information on litigation in which the Tender is involved.

Information of the works for which Tender acceptance letters are received.

Others -- Information of the works for which Tender acceptance letters are received.

PWD Registration Details

PWD Registration Certificate (Class I/II/III/IV)

3.3 a) Each Tenderer should further demonstrate : As per this note, each tenderer should demonstrate availability of few key equipments /machinery for execution of the work . However as per Govt circular no GO-FD/AE 263/EXP12-2022 dt-11-05-2022, this clause for owning key equipments for works costing up to Rs.3.00 crores is exempted. However it is obligatory for the contractor to use the following machineries for various activities involved in construction as per Morth specification.

Others -- Machinery details

Fee & Financial Details

Tender Fee Amount

₹1,970

EMD Fee Amount

₹1.6 L

Important Dates

Last Activity

4 Feb 2025

Published

4 Feb 2025

Bid Opening

12 Feb 2025

Download Ends

5 Feb 2025

BOQ Preview

•

CONSTRUCTION OF FOUR CLASSROOMS FOR GOVERNMENT PU COLLEGE AT CHINCHALI VILLAGE IN GADAG TQ/DIST. Ground Floor civil Works

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Mechanical Means -

•

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barric...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- Work should be carried out as per the direction of engineer incharge of work.

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...

•

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick ma- sonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type

•

Fastener with t...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including co...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. ---- Work should be carried out as per ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

•

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

•

polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac...

•

EXCAVATION & FOUNDATION TREATMENT WORKS: Providing and fixing 25 mm dia 2.75 m long ribbed steel anchor rods with one end split and driven firmly using steel wedge into 1.25 m deep 38 mm dia. hole dri...

•

CONSTRUCTION OF FOUR CLASSROOMS FOR GOVERNMENT PU COLLEGE AT CHINCHALI VILLAGE IN GADAG TQ/DIST. Ground Floor Electrical

•

Concealed Conduit System :Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concr...

•

Concealed Conduit System :Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runn...

•

Supplying heavy gauge PVC Conduit Pipe 25dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement p...

•

Supplying PVC/GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using...

•

Point wiring using Copper wire with out switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC ins...

•

Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch.(PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the direction of engineer incharge of work.

•

Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box.(PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the direction of engineer incharge of work.

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,1.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with spec...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,2.5 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with spec...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,4 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specif...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,6 SQMM multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specif...

•

Supplying and flush mounting powder coated / galvanized metal box size 1-3way suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Ston...

•

Supplying and flush mounting powder coated / galvanized metal box size 4-5way suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Ston...

•

Supplying and flush mounting powder coated / galvanized metal box size 8 way suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone...

•

Supplying and flush mounting powder coated / galvanized metal box size 10-12way suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/St...

•

Supplying and fixing superior quality 3Mudular modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the e...

•

Supplying and fixing superior quality 4Mudular modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the e...

•

Supplying and fixing superior quality 8 modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing...

•

Supplying and fixing superior quality 10-12Mudular modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on t...

•

Supplying and fixing of 6Amps 0ne way modular switch on existing modular switch plate as per IS 3854 and IS 1293.(PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the direction of ...

•

Supplying and fixing of 6Amps 3way modular Socketc on existing modular switch plate as per IS 3854 and IS 1293.(PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the direction of e...

•

Supplying and fixing of modular stepped fan regulator Two Module on existing modular switch plate as per and IS 1293.(PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the direction...

•

Supplying and fixing of 16Amps 0ne way modular switch on existing modular switch plate as per IS 3854 and IS 1293.(PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the direction of...

•

Supplying and fixing of32Amps modular DP Switch on existing modular switch plate as per IS 3854 and IS 1293.(PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the direction of engin...

•

Supplying and fixing of 6/16amps modular Universal Socket on existing modular switch plate as per IS 3854 and IS 1293.(PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the directi...

•

Supplying and fixing of 6AmpsLamp holder on existing board.(PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the direction of engineer incharge of work.

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.63amps.(PWD Electrical SR-II 2023-24) ---- Work should be carried out as per ...

•

Supplying and fixing of miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breakin...

•

Supplying and fixing 12 way regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single...

•

Supplying of Ceiling Fan with Capacitor rating as per guideline of BEE 5 Star rating and IS: 374/19 and also comply with IS: 1709/1984 with latest ammendement, Rated voltage 220 V / 50 hZ, Rated power...

•

LED Indood supplying of 1x4 feet LED PVC square batten 36 W with high quality diffuser with life of 25000 burning hours at 70% lumen maintenance with CRI more than 80 power input 220-240V@ 50Hz & Powe...

•

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...

•

Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt...

•

Supplying,fixing,wiring,earthelectrodeforgroundingconduits,I.C.cutoutsandotherequipment'sonthemeterboardusing40mmdia2.90mmthickGIpipe2.5mlongburiedinapit.Thepitshouldbefilledwithequalproportionofsalta...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) ...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm (PWD Electrical SR-II 2023-24) ---- Work should ...

•

Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor.(PWD Electrica...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz12/24V D.C (PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the dir...

•

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.5...

•

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

•

Supply of LED Streetlight luminare with pressure dia cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

•

Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket 1x40/2x40 W fluorescent tube street light fitting of all capacities to GI...

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.16A-25A 2 pole (PWD Electrical SR-II 2023-24) ---- Work should be car...

•

Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board. pole (PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the direction of engineer incharge ...

•

Supplying, fixing and wiring 0 to 30A Direct Reading AC analog type Ammeter (PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the direction of engineer incharge of work.

•

Supplying, fixing and wiring 0 to 1500A CT operated AC analog type Ammeter without CT (PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the direction of engineer incharge of work.

•

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter (PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the direction of engineer incharge of work.

•

Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired.(PWD E...

•

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

•

CONSTRUCTION OF FOUR CLASSROOMS FOR GOVERNMENT PU COLLEGE AT CHINCHALI VILLAGE IN GADAG TQ/DIST. Fixtures

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 300mm ---- Work should be carried out as per the direction of...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 300mm ---- Work should be carried out as per the dir...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 150x10mm ---- Work should be carried out as per the direc...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 250x10mm ---- Work should be carried out as per the direc...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS hinges 100 mm ---- Work should be carried out as per the direction of...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Door stopper 75mm ---- Work should be carried out as per the directio...

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- Work should be carried ...

•

Providing and fixing door latch with necessary screws etc complete. - Bright finished brass latch ---- Work should be carried out as per the direction of engineer incharge of work.

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw 3 w.i-6032 Call-2 Gadag (2) (1).doc

Tender Document • 0.25 MB

sec.9 wood-work.zip

Operating Procedures • 6.29 MB

sec.2 earthwork.zip

Operating Procedures • 0.57 MB

loc - format-2.pdf

Others - loc format 2 • 0.10 MB

sec.7 steel-work.zip

Operating Procedures • 4.85 MB

sec.6 brick-masonry.zip

Operating Procedures • 3.83 MB

sec 800&900 q[1].c.zip

Operating Procedures • 6.88 MB

sec.4 concrete-work.zip

Operating Procedures • 8.75 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Buildings

CONSTRUCTION OF FOUR CLASSROOMS FOR GOVERNMENT PU COLLEGE AT CHINCHALI VILLAGE IN GADAG TQ/DIST.

Public Works Department

PWD Division Office Gadaga | Karnataka

Amount: ₹78.6 LCloses: 11 Feb 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published4 Feb 2025
Closed11 Feb 2025
Retendered4 Feb 2025

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 4 Feb 2025

Tender Value

₹78.6 L

EMD Value

₹1.6 L

Closing Date

11 Feb 2025, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

EE PWD GADAG

Office Number

Work Description

CONSTRUCTION OF FOUR CLASSROOMS FOR GOVERNMENT PU COLLEGE AT CHINCHALI VILLAGE IN GADAG TQ/DIST.

Tender Information

Tender ID

PWD/2024-25/BD/WORK_INDENT6032/CALL-2

Reference Number

PWD/2024-25/BD/WORK_INDENT6032/CALL-2

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Gadaga

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredAnnual Turnover Certificate UDIN is Mandatory in Turnover certifcate.

RequiredPresent Postal address and phone number of the Contractor is Complusory.

RequiredContractor PWD Registration Certificate

RequiredSatisfactorily completed as prime contractor, at least one similar work done certificate.

RequiredLOC should be preescribed formate-2,if not then the tender will not be accepted

RequiredBid capacity on the contractor letter head

RequiredQuantity wise workdone certificate.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

Tender invited only for eligible contractors registered under Karnataka Public Works Dept

Conditional tenders will not be accepted.

Financial Year will be reckoned as the period between first day of April and Thiry first day of March of succeeding year(both days inclusive)

The tenderer shall note that the scanned Documents can also be uploaded in the tasks created under Document/Evidence Required from the Bidder

The Employer reserves the right to Reject any or all Tenders without assigning any reason

The Department is not responsible for any delay in accessing kpp portal

All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.

Physical quantities requirement to qualify the Tenderer is 80% of the estimated quantity as per Govt Order No. .PW/630/CRM/2014 Bangalore Dated: 17-11-2014

Department will not supply any materials.

The cost of the Tender form shall not be refundable.

Epayment Challan should be Scanned

Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2024-25 in the Technical Qualification Criteria mentioned in the next section

The item rates are excluding 18% GST but inclusive of all other charges.

GST shall be paid to the tendered amount separately.

The Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delays as determined by the authority while granting the extension of time.

The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes (excluding GST) as per prevailing Government Orders

Work Completion/Execution Period : 11 Months

The Project Completion period is 11 months and the Tenderer should maintain work during the defect liability period, which is (1) one year after successful completion of the work.

Star rates are applicable, As per the Government Circular No. PWD 159 CRM 2009 Bangalore dated 30-9-2010

Technical Criteria

Past Experience

Work Done Certificate

Others -- Quantity wise work done certificate

List of existing commitments and ongoing works

Others -- List of existing commitments and ongoing works

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Others -- On letter head

Capabilities of Vendor

Others -- calculation sheet on letter head

Assessed Tender Capacity shall be more than the Tendered Amount

Others -- Assessed Tender Capacity shall be more than the Tendered Amount

Others -- Information on the Letter Head of the tenderer

Financial Status

Audited CA Certificate of Annual Turnover

Others -- Statement on the Letter head of the tenderer

The EMD of Rs.1,57,200.00 shall be paid in full through e-payment or in two parts i.e,Part(1)Rs. 50,000 by e-payment part (2)1,07,200.00 in the form of BG to be upload.

Others -- EMD Details

Annual Financial Turnover Certifcate for the last fve years i.e from 2019-20 to 2023-24, UDIN is Mandatory in Turnover certifcate.

Audited CA Certificate of Annual Turnover

Liquid assets and /or availability of credit facilities of no less than Rs. 23.58 Lakhs (estimated cash flow for 3 months of peak construction period)

Line of Credit

Others

Banker Details for reference

Others -- Banker Details for reference

Information on litigation in which the Tender is involved.

Others -- Information on litigation in which the Tender is involved.

Information of the works for which Tender acceptance letters are received.

Others -- Information of the works for which Tender acceptance letters are received.

PWD Registration Details

PWD Registration Certificate (Class I/II/III/IV)

Others -- Machinery details

Fee & Financial Details

Tender Fee Amount

₹1,970

EMD Fee Amount

₹1.6 L

Important Dates

Last Activity

4 Feb 2025

Published

4 Feb 2025

Bid Opening

12 Feb 2025

Download Ends

5 Feb 2025

BOQ Preview

•

CONSTRUCTION OF FOUR CLASSROOMS FOR GOVERNMENT PU COLLEGE AT CHINCHALI VILLAGE IN GADAG TQ/DIST. Ground Floor civil Works

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Mechanical Means -

•

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barric...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- Work should be carried out as per the direction of engineer incharge of work.

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick ma- sonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type

•

Fastener with t...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including co...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. ---- Work should be carried out as per ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

•

CONSTRUCTION OF FOUR CLASSROOMS FOR GOVERNMENT PU COLLEGE AT CHINCHALI VILLAGE IN GADAG TQ/DIST. Ground Floor Electrical

•

Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch.(PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the direction of engineer incharge of work.

•

Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box.(PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the direction of engineer incharge of work.

•

Supplying and fixing of 6AmpsLamp holder on existing board.(PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the direction of engineer incharge of work.

•

Supplying, fixing and wiring 0 to 30A Direct Reading AC analog type Ammeter (PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the direction of engineer incharge of work.

•

Supplying, fixing and wiring 0 to 1500A CT operated AC analog type Ammeter without CT (PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the direction of engineer incharge of work.

•

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter (PWD Electrical SR-II 2023-24) ---- Work should be carried out as per the direction of engineer incharge of work.

•

CONSTRUCTION OF FOUR CLASSROOMS FOR GOVERNMENT PU COLLEGE AT CHINCHALI VILLAGE IN GADAG TQ/DIST. Fixtures

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 300mm ---- Work should be carried out as per the direction of...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 300mm ---- Work should be carried out as per the dir...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 150x10mm ---- Work should be carried out as per the direc...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 250x10mm ---- Work should be carried out as per the direc...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS hinges 100 mm ---- Work should be carried out as per the direction of...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Door stopper 75mm ---- Work should be carried out as per the directio...

•

Providing and fixing door latch with necessary screws etc complete. - Bright finished brass latch ---- Work should be carried out as per the direction of engineer incharge of work.

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw 3 w.i-6032 Call-2 Gadag (2) (1).doc

Tender Document • 0.25 MB

sec.9 wood-work.zip

Operating Procedures • 6.29 MB

sec.2 earthwork.zip

Operating Procedures • 0.57 MB

loc - format-2.pdf

Others - loc format 2 • 0.10 MB

sec.7 steel-work.zip

Operating Procedures • 4.85 MB

sec.6 brick-masonry.zip

Operating Procedures • 3.83 MB

sec 800&900 q[1].c.zip

Operating Procedures • 6.88 MB

sec.4 concrete-work.zip

Operating Procedures • 8.75 MB

Ready to Participate?

Download all tender documents and submit your bid