COMPREHENSIVE B/R MAINT TO SAROJ, GHUMAN, BENJAMEN AND OFFICERS AREA AT AF STN UTARLAI

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on stone masonry/concrete surfaces/ brick / PCC block surface, finished even and smooth without using extra cement.

M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces in ceiling including finishing even and smooth without using extra cement.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted, over a coat of chalk whiting all as directed.

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying two coats of white wash.

Material & Labour for preparation of old plastered/unplastered surfaces by brooming down or steel wire brushing scrapping down smoke ,roof moulds moss and efflorescent salt and trading oil and greasing spots of walls and applying one coat of white wash on wall all as specified.

All as per item No 6 above but on ceiling and in one coat white wash complete all as specified

M & L for complete removal of existing treatment on ceiling and applying two coats white wash complete all as specified

Material and Labour for preparation of old painted surfaces of wood & wood based materials over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed by the Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint.

M&L for washing, rubbing down and stopping of distempered and painted surfaces of walls including removing of undesired nails and filling the holes, undulations etc with putty and applying one coat of oil bound distemper, white or tinted complete all as specified and directed.

M & L for complete removal of existing treatment and applying two coat of oil bound distemper, white or tinted over a coat of primer incl filling of wall putty in holes, undulated area etc complete all as specified and directed.

Material and Labour for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of oil bound distemper over one coat of avg. thickness 1.5 mm of wall care putty complete all as specefied and directed by Engr-in charge .

Hacking out old broken glass (any thickness, size quality of description) from metal frame including punching or drilling out old glazing pins./springs clips complete all as specified and directed.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads in square n.exc. 0.5 sqm in each pane.

ditto- all as per item No. 15 above but 5.00mm thick and area exc 0.5 Sqm each pane

Supply & Fix as in repairs 3 mm thick frosted glass ordinaary quality and glazing with oil putty in sqaure n.exc 0.5 sqm in each pane complete all as specified and directed

S&F in repairs stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden/aluminium beads supplied with shutters.

Supply & Fix as in repair 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed

Supply & Fix as in repairs aluminium alloy anodised sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium complete all as specified and as directed

Supply & Fix in repairs hasp and staple of size 100 mm aluminium anodised wire type including bolt to hinges plate and fixed with screws complete all as specifed and directed

Supply & Fix in repairs floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 150mm long complete all as specified and directed

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150mm.

Supply & Fix as in repair 18/19 mm thick prelaminated particle board interior grade, prelaminated both side face with decorative choice lamination one side and other side balancing white, fixed with screws or timber leaping on cutting exposded edges polishing complete as in built in shelves, cabinets , kitchen cupbords, modular kitchen drawer and almirah shutters or other placed complete as in built in shelves, cabinets partions etc including dismantling of old board. complete all as specified and directed.

S&F in repairs magnetic wardrobe ball catcher suitable for shutters fixed with nut,screw and washers of mild steel,bright finished.

S&F in repair Butt hinges,75 mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised & fixed type C-21.

Supply & Fix in repairs aluminium anodised barrel tower bolt or extruded section length of bolt 150 mm long complete all as specified and directed

S&F in repairs stainless steel Kitchen plate rack of size 31”x36”x10”and 1mm thick of Make-Nirali/ Blue Star/diamond/ jayna.

S&F in repairs tubular towel rail, brass chromium plated, 20 mm dia ''D'' type, 60 cm long between flanges and fixed complete all as specified and directed.

S& F in repairs 150mm ordinary rat rail rod pattern springs heavy duty including roller and roller plate fixed with screws or welding complete all as specified and directed.

S&F in repairs 40mm dia cupboard knobs fixed with nut,screw and washers of mild steel,bright finished.

S&F in repairs first class hard wood (teak) beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. and removing old beads from site.

S&F 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with inlet / out let tank nipple , 20mm bore PVC float valve all as per specified and directed.

S&F 1000 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position , inlet / out let tank nipple , 20mm bore PVC float valve all as per specified and directed.

Taking down chowkats or frames with shutters (Without taking off shutters from the frame) n.exc 1.5 sqm each.

Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each.

S&F solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed.

M & L for welding in repairs n exc 2.5 cm in length of any thckness metal to be welded in windows /gates/chowkhats etc . complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top rail and bottom rail. Penelling of plain colour PVC sheet to be fitted to the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site all as directed.

S & F 100 mm Aluminium Butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and fixed, type B-21all as spd and dircted.

S & F 100mm size mild steel butt hinges medium weight cold rolled mild steel 100mm long.

S&F Aluminum tower boltes of extruded section of size 150mm.

S&F Aluminium, anodised, barrel tower bolt of extruded section and fixed, 200 mm size

Supply & Fix 150 mm long extruded aluminium alloy handles, fabricatee type anodised complete all as specified and as directed

S & F 2nd class HW 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated.

S&F 2nd class HW 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (w/o sash bars)

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

M & L for preparations of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specifified and directed.

S&F for galvanised steel tubing 15 mm dia (ISI) marked medium grade with necessary fittings lie tees, elbows, sockets, reducers, bends etc including necessary cutting, threading laid in trenches/floors, fixed to walls including taking down old GI Steel tubing with connections of same dia etc complete all as specified and directed

All as per item No 51 above but 20 mm dia

All as per item No 52 above but 25 mm dia

Cutting chases, pinning in, making good to facings in brick/stone masonry where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20cm girth

S&F in repairs 15 mm bore bib taps, cast copper alloy chromium plated , fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.Make : Cera / Seiko / Parryware/ prayag

S&F in repairs 15mm dia CP WHB mixer chromium plated for mixing hot and cold water,with capstan head, screwed down for iron pipe and fixed for brass ferrule complete all as specified and directed. Make : Cera / Seiko / Parryware/ jaquar

S&F in repairs 15mm dia wall mixer, chromium plated with telephonic shower arrangements/ L-bend for shower type , screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make : Cera / Seiko / Parryware/ jaquar

S&F in repairs 15mm dia CP sink mixer chromium plated for mixing hot and cold water,with capstan head, screwed down for iron pipe and fixed for brass ferrule complete all as specified and directed. Make : Cera / Seiko / Parryware/ jaquar

S&F in repairs 15mm bore pillar tap fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete.Cera / Seiko / Parryware/jaquar

S&F in repairs, 15 mm bore stop valve/ angle valve fancy type cast copper alloy chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S&F in repairs Vitreous china water closet (Sqating Pattern) "Orissa Pattern" size 580x440mm white with 'P' or 'S' trap front or back inlet and integral foots rest any pattern including connecting pipe of CI at suitable bore and length and incl re-fixing old Cistern, flush pipe etc if required & set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish etc out side of MOD land complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and suitable length, complete all as specified.

S&F in repair sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410mm x 330 mm x 160 mm, including brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

S&F In repairs PVC connection 15 mm size with PTMT nuts of length 600 mm.

S&F 32 mm dia PVC flexible pipe fixed as waste pipe for WHB/ kitchen sink/ urinals inclding connecting to waste coupling with PVC couplers, elbow etc. complete all as spcified and directed.

S&F in repair 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet including bracket and 32mm flush pipe of polythylene of low or high density in repairs. (including dismantlling of half turn valve 32 mm of any description , if required)

Material & Labour for preparation of old plastered/unplastered surfaces by brooming down or steel wire brushing scrapping down smoke ,roof moulds moss and efflorescent salt and trading oil and greasing spots of walls and applying two coat of damp proof to arrest DAMPNESS on wall/ceiling all as specified by manufacturer. MAKE-ASIAN PAINTS.

S&F in repair grating dome 125 mm dia of stainless steel with or without hole complete all as specified.

S&F in repairs chromium plated Jet spray with chromium plated finish including complete accessories complete all as specified and directed.

S&F in repairs chromium plated shower rose125 mm dia with CP arms, with or without swivel joints, including fixing to 15 mm steel pipe or union complete all as specified and directed.

Cleaning and removing all scale and dirt etc of storage water tanks of capacity exc 250 ltrs but n exc 500 ltrs including cleaning of mouths of circulating pipes by applying bleaching powder and brushing with wire brushes taking out all scales etc cleaning of tank with fresh water, flushing out disinfecting of tank with potassium permaganate 2% solution till stored in tank become clear including writing date of cleaning in DD-MM-YY Format in block letters all as specified and as directed

S&F in repairs 15 mm bore quarter turn two way angle cock/ bib cock capstan head, cast copper alloy, CP high pressure with crutch or butterfly handle, chromium plated, screwed both ends for iron pipes or for brass ferrule complete all as specified and directed.

S& F in repairs brass chromium plated health faucet of approved make and standared size with necessary chromium plated finish flexible pipe of min length 1.0 mtr inlcuding all other arrangements of 15mm bore and fixed complete all as specified and directed.

S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. Make: Hindware/Parryware

S&F in repairs CP towel ring of approved make all as specified and directed.

S&F in repairs straight 5.50mm thick front sheet glass shelf 600 mm long and 120mm wide with Cromium plated railing , mounted on decorative chromium plated bracket, assembly set complete all as specified and directed.

S&F in repairs straight 5.50mm thick sheet glass corner shelf 300mm x 300mm size in quarter circle shape or rounded at one side with Cromium plated railing , mounted on decorative chromium plated bracket assembly set complete all as specified and directed. Note : sample of glass shelf shall be provided/ decided by Engineer-In-Charge.

S&F in repair choromium plated soap dish complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises all as directed

M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6.

M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6.

M&L for glazed ceramic tiles, coloured, 350mmx 250mm x7 mm or 450 x 300 x 7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.

Material & Labour for vitrified ceramic light shade coloured tiles 10 mm thick (Square/Rectangular) polished,area of each tiles n exc 0.36 Sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed

M&L for spl treatment to sunken portion (inc necessary dismantling of tiles and PCC along with req PCC at site of mix 1:2:4 of req thickness) with 10mm thck plaster in CM 1:4 with WPC Liq complast 421 and applying one coat each of Nitroproof 100 and Nitroproof 120 on plastered surface. Rendering again 10 tck plast in CM 1:4 mixed with complas 421 in sunken portion of WC and CI pipe joint shall be filled inc filling of lean conc 1:5:10

Demolition stone slabs and tiles of any description or thickness in floors,apron etc laid, bedded and pointed in any mortar

M&L for granite(of any type) work rubbed and polished in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick cement screed in CM 1:6.

M&L for rounding to the edges of granite stone slabs for kitchen platform and window cills etc complete all as specified and directed.

S & F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 15mm bore iron pipe and fixed. (Minimum weight 20mm - 2 1 0 gms ) Make : prayag/polytuf/Shakti

Supply and fix in repairs PVC water tank cover suitable for 500ltrs/1000ltrs capacity rotational moulded polyethylene water storage tanks.

Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each, resecuring, easing, repairing,adjusting and refixing in the same opening.

S&F 100mm size stainless steel handle with stainless steel screws fixed to kitchen cupboards / drawer complete all as specified and directed.

S&F stainless steel telescopic Nickel chrome plated finish ball bearing channel for modular kitchen/drawer in kitchen including repair to modular kitchen drawer complete all as specified and directed. Note : sample of stainless steel telescopic channel shall be decided by Engineer-in-Charge

S&F in repair 2.0mm thick stainless steel grade 202 cutlery tray perforated type each size 450mm x 500mm x 100 mm for modular kitchen drawer including 5mm dia stainless steel wire railing complete all as specified and directed. Note : Sample shall be aprroved by GE/Engineer-in-charge.

S&F in repair 2.0mm thick stainless steel grade 202 cup and saucer tray perforated type each size 450mm x 500mm x 100 mm for modular kitchen drawer including 5mm dia stainless steel wire railing complete all as specified and directed. Note : Sample shall be aprroved by GE/Engineer-in-charge.

S&F in repair 5.0mm dia stainless steel grade 202 thali basket / tray with chrome nickle finishes each size 450mm x 500mm x 200-300mm for modular kitchen drawer complete all as specified and directed. Note : Sample shall be aprroved by GE/Engineer-in-charge.

S&F in reapir, 2mm thick stainless steel grade 202 plate basket / tray perforated type with partition if required for glass and bowl storage with chrome nickle finishes each size 450mm x 500mm x 200-300 mm for modular kitchen drawer including 5mm dia stainless steel wire railing complete all as specified and directed. Note : Sample shall be aprroved by GE/Engineer-in-charge.

S&F 3way 3D hydraulic auto adjustable (Soft closed) concealed cabinets hinges stainless steel grade 202 with chrome nickle finishes each size 116x60mm mm for modular kitchen drawer complete all as specified and directed. Note : Sample shall be aprroved by GE/Engineer-in-charge.

S & F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:4 and 2 coats of oil bound distamper on new surface over primer etc complete all as specified and as directed.

S & F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 and 2 coats of oil bound distamper on new surface over primer etc complete all as specified and as directed.

S & F for box steel ventilator (with bottom portion fixed with pin headed glass pane and top portion with two top hung shutter one with pin headed glass pane and other with wiremesh including pressed steel frame of size 80 X 40 X 1.25mm thick filled with PCC complete with mild steel stay etc) including all accessaries and making the surface good including painting etc all as specifiedd in Drg No. CEAA/TD/120 R dated 06 Jun 2002 Sheet No. 1/4 to 4/4.

S&F framed work such as grills, gratings etc with ends of bar shouldered and/or riveted or forged into spikes, framed guard bars etc confirming to Fe-290, Gde -E-165.

S&F three track aluminum anodised sliding window with three sliding shutter , the size of outer frame three track 100 x 37x 1.50mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 5 mm thick Transparency glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including anodised aluminium grill and all necessary fittings complete all as specified and directed.

S&F fixed type anodised aluminium ventilators with provision of bottom panel in fixed glazing of 3mm thick glass and top shutter shall be provided with 2 nos aluminum 75mm long hinge at upper side with 3mm thick sheet glass including 4 mm dia stainless steel 2 Nos stay, tower bolt 100mm long 1 Nos, anodised aluminium grill with aluminium chanel including 0.36mm dia stainless steel wire cloth and average aperture 1.4mm and all necessary fittings arrangement complete using aluminium section 65x40x1.5mm thick etc in frame and shutter frame aluminium section size 37x18x1.2mm complete all as specified.

Please Enable Macros to View BoQ information