NITNo13ItemNo7

Improvement of Starter Panels of 80 HP Sewage Submersible Pumps at R U nagar SPS by carrying out the following works: MPD, Range 40-500 Amp (upto 300 HP), Make: Soft hard

VPD, Make: Softhard

Supply of 250 A, 36 KA, 3 Pole MCCB with spreader links and rotaty handle. Make: Schnider/ L&T/ Any other DJB Approved Make

2-Way, 440 V, Seal Monitor for Starter of 80 HP Submersible Pump,

Supply of Timer, Model -800XA, Make: Selec

Supply of Indicating Lamps of Red, Yellow, Green Colour Make: Vaishno/ L&T / BCH / Siemens

Supply of Indicating Lamps of Blue Colour Make: Vaishno/ L&T / BCH / Siemens

ATS Transformer for Starter Panel of 80 HP Submersible Pump as per sample

Replacement of the above supplied items in the Starter panels after dismantling of the existing defective items. The job also includes laying of the above cable in the trench & fixing of the above supplied thimbles.

Dust blowing & cleaning of the Control Panel with the help of electric blower and manual labour. The job also includes decarbonising the contacts of contactors and other electrical terminations, re-dressing of power & control wiring, proper crimping of lugs, tightening of all nuts & bolts and alignment of doors etc. as required at site

Providing and fixing earth bus of 25 mm X 5 mm GI strip on surface for connections etc. as required. DSR Electrical 2018: Item No 5.15

Painting of the Control Panel with two coats of super enameled Paint after removing the old Paint with the help of emery paper.

Improvement of Starter Panel of 150 HP Sewage Submersible Pump by carrying out the following works: 3-Way, 220 V, Seal Monitor for Starter of 150 HP Submersible Pump, Make: Kishor

Supply of Timer, Model -800XA, Make: Selec

Supply of Indicating Lamps of Red, Yellow, Green Colour Make: Vaishno/ L&T / BCH / Siemens

Supply of Indicating Lamps of Blue Colour Make: Vaishno/ L&T / BCH / Siemens

ATS Transformer for Starter Panel of 150 HP Submersible Pump as per sample

50 sqmm heavy duty Copper Thimble

95 sqmm heavy duty Copper Thimble

Supply of 1 C x 95 mm2, PVC insulated & PVC round sheathed bright annealed copper conductor flexible cable for voltage grade upto 1100 V as per IS:694/1994.

Supply of 3 Core, 50 mm2, PVC insulated & PVC round sheathed bright annealed copper conductor flexible cable for voltage grade upto 1100 V as per IS:694/1994.

Replacement of the above supplied items in the Starter panels after dismantling of the existing defective items. The job also includes laying of the above cable in the trench & fixing of the above supplied thimbles.

Dust blowing & cleaning of the Control Panel with the help of electric blower and manual labour. The job also includes decarbonising the contacts of contactors and other electrical terminations, re-dressing of power & control wiring, proper crimping of lugs, tightening of all nuts & bolts and alignment of doors etc. as required at site

Painting of the Control Panel with two coats of super enameled Paint after removing the old Paint with the help of emery paper. Note: Item No 1, 2 & 3 Shall be provided by the department

ABS ELECTRICAL COMPANY