Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.1 LAccepted-AOC 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | JALANDHAR | PUNJAB | 144001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹28.5 L+₹1.3 L (4.94%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹28.9 L+₹1.8 L (6.59%)Rejected-Finance | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹32.6 L+₹5.4 L (20.0%)Rejected-Finance | L4 | Rejected-Finance Not being L1 |
| Sl No | Description | Qty | Unit | NATIONAL ROAD BUILDERS L3 | s s construction L1 | M/S CHOUDHARY BUILDERS L2 | jyoti parkash sharma L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dirt and mud of water sunken surface in roads, paths etc. cutting around edges to at least 25mm in depth making good by applying tack coat on bituminous surface with paving bitumen VG-10 grade @ 5 Kg per Ten Square Metre, putting in Pre-mixed bituminous macadam using binder 9.8 Kg per 10 Sqm, binded with 0.09 Cum of stone chippings, 6.3 mm size and well rammed (including supply of premixed macadam, binder and chippings), depth of pot holes exc 30 mm complete, all as specified and as directed | 5 | Ten Square metre | 3,000 ₹15,000 | 2,500 ₹12,500 Lowest | 3,400 ₹17,000 | 4,000 ₹20,000 |
| 2.00 | Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all loose dirt etc., and applying evenly a priming / tack coat on existing black top surfaces with paving bitumen primer using bitumen VG-10 paving grade ( 80 -100 penetration) @ 5 Kg per Ten Square Metre with tar boiler and including Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% paving bitumen using bitumen VG-30 paving grade ( 50 -70 penetration) binder content by weight of total mix rolled and compacted to required camber and gradient, complete, all as specified and as directed. | 510 | Ten Square metre | 4,900 ₹24,99,000 | 4,300 ₹21,93,000 Lowest | 4,500 ₹22,95,000 | 5,510 ₹28,10,100 |
| 3.00 | Premix bituminous macadam with 4% paving using bitumen VG-30 paving grade ( 50 -70 penetration) bitumen binder, laid/rolled and compacted to required gradient and camber (consolidated thickness upto maximum 75mm), complete, all as specified and as directed . | 30 | Cubic metre | 6,000 ₹1,80,000 Lowest | 9,000 ₹2,70,000 | 9,000 ₹2,70,000 | 8,100 ₹2,43,000 |
| 4.00Note for item No. 1 to 3 : (a) Preparation of mix in hot mix plant, spreading by self propelling mechanical paver and rolling and compaction by set of rollers as specified in particular specifications shall be carried out. Hot mix plant may be installed at any distance but the contractor shall be responsible for maintaining the required temperature of mix under all conditions till it is laid and compacted. Unit rate against these items shall include for carrying out the works with deployment of these machinery for which nothing extra shall be payable and no delay in completion of work shall be acceptable on this account. (b) To achieve marshal stability of 1050 KN and all as per SSR Part-I Clause No. 20.B.4. (c) If qty of binder contents is less than the qty as specified in respective items of BOQ, it shall be adjusted at supply only rates of paving bitumen @ Rs 60.00 Per Kg and if qty of binder contents is more than the qty as specified in respective items of BOQ no adjustment shall be made. | |||||||
| 5.00 | Preparation of any type of road surfaces by scratching old spots, paints, trading oils greasy spots etc. and applying reflective Thermo Plastic road marking paint 2.5 mm thick as side, side lines, dashes, arrows, letters, stop lines etc of white/yellow approved colour of width 100mm and more as directed conforming to Ministry of surface Transaport (MORTH) specification for the road and bridge work : 4th revision, over primer as per manufacturers instructions including glass beads (intermix) type I (most/BS6008A) and provision contained in IRC-35-1997, complete all as specified and directed.
Note : Contractor shall have to furnish the detail that quantity minimum used per square meter is 5.00 Kg/Sqm. | 1,500 | Runing metre | 60 ₹90,000 | 60 ₹90,000 | 70 ₹1,05,000 | 45 ₹67,500 Lowest |
| 6.00 | Convex mirror of 1000mm dia, made of polycorbonate material provided with 75mm dia mild steel medium weight pipe post of 108m high, duly powder coated fixed on ground with PCC 1:2:4 type B-1 of block size 60x60x60 cm, fixing in repair including earth work & removing excavated soil to a distance not exceeding 50m, complete all as specified as directed by Engr-in-Charge.
Note : Cost of PCC and earth work is deemed to be included in unit cost. | 4 | Each | 5,000 ₹20,000 Lowest | 7,000 ₹28,000 | 8,000 ₹32,000 | 5,500 ₹22,000 |
| 7.00 | Metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. | 10 | Each | 600 ₹6,000 Lowest | 800 ₹8,000 | 900 ₹9,000 | 600 ₹6,000 Lowest |
| 8.00 | Supply and fixing cat eye solar reflective type of metal body alloy of size 110mm x 120mm x 20mm with PMMA striplens reflector of model No. DA-972 fixed with and incl MS stud of suitable size as per manufactures instructions., complete all as specified and directed. | 100 | Each | 400 ₹40,000 Lowest | 600 ₹60,000 | 700 ₹70,000 | 450 ₹45,000 |
| 9.00 | S&F in replacement Solar cat eye aluminium alloy shall ( 100% water proofing design according to 65 ) of size 125mm x 125mm x 25mm ( shank 65mm ) of high efficiency Mono rystafie solar panel 2.4V / 0.3 watt one NI -ed rechargeable battery ( 1.2V / 1600MA ) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions etc. all as specified and directed with stem self illuminating in dim areas during night time . Solar rechargeable batteries for continual performance without much maintenance . Super bright LEDs with a viewing distance of 500 meters . Equipped with prismatic reflective lens on each side ensure maximum reflectivity make up of highly compressive material cosustain over 10 tonne water resistant. | 24 | Each | 1,800 ₹43,200 | 2,200 ₹52,800 | 2,100 ₹50,400 | 1,790 ₹42,960 Lowest |
Tender Value
₹29.9 L
EMD Value
₹60,000
Closing Date
20 Apr 2026, 6:00 pmClosed
Col Neelima CWE
Military Engineer Services, Commander Works Engineer, Udhampur, PO - Garhi, Udhampur-182121
SPL REPAIRS TO ROAD OF JNE DOWN AND ADJOINING AREA UNDER GE NORTH UDHAMPUR
2026_MES_758544_1
CWE/U(N)-103/2025-26
Open Tender
Civil Works
Item Rate
120 days
UDHAMPUR
As per NIT
7 documents required · 7 mandatory
₹500
GE (North) UDHAMPUR
₹60,000
21 May 2026
30 Mar 2026
22 Apr 2026
30 Mar 2026
20 Apr 2026
13 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dirt and mud of water sunken surface in roads, paths etc. cutting around edges to at least 25mm in depth making good by applying tack coat on bituminous surface with paving bitumen VG-10 grade @ 5 Kg per Ten Square Metre, putting in Pre-mixed bituminous macadam using binder 9.8 Kg per 10 Sqm, binded with 0.09 Cum of stone chippings, 6.3 mm size and well rammed (including supply of premixed macadam, binder and chippings), depth of pot holes exc 30 mm complete, all as specified and as directed | |||||
| - | Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all loose dirt etc., and applying evenly a priming / tack coat on existing black top surfaces with paving bitumen primer using bitumen VG-10 paving grade ( 80 -100 penetration) @ 5 Kg per Ten Square Metre with tar boiler and including Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% paving bitumen using bitumen VG-30 paving grade ( 50 -70 penetration) binder content by weight of total mix rolled and compacted to required camber and gradient, complete, all as specified and as directed. | - | Ten Square metre | - | - |
| - | Premix bituminous macadam with 4% paving using bitumen VG-30 paving grade ( 50 -70 penetration) bitumen binder, laid/rolled and compacted to required gradient and camber (consolidated thickness upto maximum 75mm), complete, all as specified and as directed . | - | Cubic metre | - | - |
| - | Preparation of any type of road surfaces by scratching old spots, paints, trading oils greasy spots etc. and applying reflective Thermo Plastic road marking paint 2.5 mm thick as side, side lines, dashes, arrows, letters, stop lines etc of white/yellow approved colour of width 100mm and more as directed conforming to Ministry of surface Transaport (MORTH) specification for the road and bridge work : 4th revision, over primer as per manufacturers instructions including glass beads (intermix) type I (most/BS6008A) and provision contained in IRC-35-1997, complete all as specified and directed.
Note : Contractor shall have to furnish the detail that quantity minimum used per square meter is 5.00 Kg/Sqm. | - | Runing metre | - | - |
| - | Convex mirror of 1000mm dia, made of polycorbonate material provided with 75mm dia mild steel medium weight pipe post of 108m high, duly powder coated fixed on ground with PCC 1:2:4 type B-1 of block size 60x60x60 cm, fixing in repair including earth work & removing excavated soil to a distance not exceeding 50m, complete all as specified as directed by Engr-in-Charge.
Note : Cost of PCC and earth work is deemed to be included in unit cost. | - | Each | - | - |
| - | Metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. | - | Each | - | - |
| - | Supply and fixing cat eye solar reflective type of metal body alloy of size 110mm x 120mm x 20mm with PMMA striplens reflector of model No. DA-972 fixed with and incl MS stud of suitable size as per manufactures instructions., complete all as specified and directed. | - | Each | - | - |
| - | S&F in replacement Solar cat eye aluminium alloy shall ( 100% water proofing design according to 65 ) of size 125mm x 125mm x 25mm ( shank 65mm ) of high efficiency Mono rystafie solar panel 2.4V / 0.3 watt one NI -ed rechargeable battery ( 1.2V / 1600MA ) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions etc. all as specified and directed with stem self illuminating in dim areas during night time . Solar rechargeable batteries for continual performance without much maintenance . Super bright LEDs with a viewing distance of 500 meters . Equipped with prismatic reflective lens on each side ensure maximum reflectivity make up of highly compressive material cosustain over 10 tonne water resistant. | - | Each | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.57 MB
BOQ_849609.xls
BOQ • 0.52 MB
Tenderdocuments.pdf
Tender Documents • 1.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .