Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 LAdmitted-Finance | ₹5.0 L | L1 | Admitted-Finance |
| 2 | L2₹5.1 L+₹15,600 (3.13%)Admitted-Finance | ₹5.1 L+₹15,600 (3.13%) | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | Rejected-Technical Not Approved by CFA |
| Sl No | Description | Qty | Unit | M/S M. T. ENTERPRISES L1 | M/S MD INAYAT HUSSAIN L2 |
|---|---|---|---|---|---|
| 1.00SCHEDULE `A' PART-I | |||||
| 1.01 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet. | 280 | Sqm | 260 ₹72,800 Lowest | 290 ₹81,200 |
| 1.02 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 280 | Sqm | 1,450 ₹4,06,000 Lowest | 1,500 ₹4,20,000 |
| 1.03 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm). | 40 | Metre | 860 ₹34,400 Lowest | 900 ₹36,000 |
| 1.04SCHEDULE `A' PART-II (Schedule of Credit) | |||||
| 1.05 | Credit of Amount (ie minus): Creadit of Amount: Taking down old rusted G.S. sheet (Note:-Sch of credit item is contractor property). | 280 | Sqm | 50 ₹-14,000 Lowest | 80 ₹-22,400 |
Tender Value
₹4.9 L
EMD Value
₹9,800
Closing Date
30 May 2026, 10:00 amClosed
SO1 Works HQ 27 Sector Assam Rifles
HQ 27 Sector Assam Rifles Churachandpur
Replacement of rusted CGI Sheet for HQ 27 Sector Assam Rifles
2026_ARMHA_909008_1
14000/27 Sect AR/Engr-MW/2026-27/13
Open Tender
Civil Works - Others
Item Rate
180 days
HQ 27 Sector Assam Rifles Churachandpur
As per tender document Replacement of rusted CGI Sheet for HQ 27 Sector Assam Rifles
2 documents required · 2 mandatory
₹1,000
Yes
DIG HQ 27 Sector Assam Rifles
₹9,800
Yes
16 Jun 2026
16 May 2026
1 Jun 2026
16 May 2026
30 May 2026
16 May 2026
16 May 2026 - 30 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1SCHEDULE `A' PART-I | |||||
| 1.01 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet. | 280 | Sqm | - | - |
| 1.02 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 280 | Sqm | - | - |
| 1.03 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm). | 40 | Metre | - | - |
| 1.04 | SCHEDULE `A' PART-II (Schedule of Credit) | - | - | - | - |
| 1.05 | Credit of Amount (ie minus): Creadit of Amount: Taking down old rusted G.S. sheet (Note:-Sch of credit item is contractor property). | 280 | Sqm | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
BOQ_955379.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .