SPECIAL REPAIRS TO BUILDING NO 47 AT THE MARATHA LIGHT INFANTRY AND ADDN AND ALTN AND REPAIRS TO EXISTING SEWAGE LINES FROM RAIGARH GATE TO LAKMI MANDIR FOR FACILITATING HYG LIVING IN OTM AT MLIRC UNDER GE BELGAUM.

Amount

Material and labour for Roof tiles,Mangalore pattern ,interlocking at side joints,laid dry etc including dismantling single layer Mangalore pattern or similar tiles in roofing and removing rubbish off the premises and old unserviceable tiles taken as credit completer. all as specified and as directed.

Material and labour for Ridge or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in lime mortar 1:3 or cement mortar 1:6 including dismantling single layer Mangalore pattern or similar tiles in roofing and removing rubbish off the premises and old unserviceable tiles taken as credit completer. all as specified and as directed.

Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc 15 cm and removing rubbish off the premises and old unserviceable timber battens of any description and taken as credit complete. all as specified and as directed.

Supply and fix Galvanised, plain sheeting 0.8mm thick with two corrugations side lap, fixed with L or J-Type bolts or cranked bolts in roofs, walls etc. with grade of zinc coating 275 including dismantling of the existing sheets of any description and taken as credit complete all as specified and as directed.

Taking down chowkhat with shutters (without taking off shutters from the frame) of areaexc 1.5 Sqm each & n exc 4 Sqm.and taken as credit complete all as specified and as directed

Taking down chowkhat with shutters (without taking off shutters from the frame) of area n exc 1.5 Sqm each and taken as credit complete all as specified and as directed.

Demolition of cement concrete ( unreinforced) in ground floors and paving not exceeding 15 cm thick above or below ground level including removal of rubbish off the premises completeall as specified and as directed.

Material and labour for Plain cement concrete 1:3:6, type C2 using 40mm graded stone aggregate, 75mm thick as in plinth protection, path etc, and finishing the surface even and fair without using extra cement including necessary steel form work complete all as specified and as directed .

Material and labour for Providing PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in floor finishes 100 mm thick including necessary steel form work complete all as specified and as directed .

Material and labour for Plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate in foundation, filling, mass concrete, levelling courses and sub bases etc including demolition of cement concrete ( unreinforced) in ground floors and paving not exceeding 15 cm thick above or below ground level including removal of rubbish off the premises completeall as specified and as directed. complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B2 (using 40mm grade stone aggregate) as in cement concrete in surface channel and drain etc including necessary steel form work including demolition of cement concrete ( unreinforced) in ground floors and paving not exceeding 15 cm thick above or below ground level including removal of rubbish off the premises completeall as specified and as directed.

Material and labour for PCC 1:2:4 type B2 (using 40mm graded agg) as in foundation filling and mass concrete etc including demolition of cement concrete ( unreinforced) in ground floors and paving not exceeding 15 cm thick above or below ground level including removal of rubbish off the premises completeall as specified and as directed. complete all as specified and as directed.

Material and labour for Extra for forming fair finished drain or channel of 30cm inner girth in cement concrete using extra cement including forms moulds mitred / stopped end etc.complete all as specified and as directed

Material and labour for Extra for forming fair finished drain or channel of 45 cm inner girth in cement concrete using extra cement including forms moulds mitred / stopped end etc.complete all as specified and as directed

Material and labour for Pre-cast cement concrete solid block masonry, exc 10cm width, blocks cast in PCC 1:3:6 type C1, using 20mm graded stone aggregate, set in CM 1:6, including demolition of PCC solid block masonry built in cement mortar pillars, etc. in any position below or above ground level etc, and remopval of debris off the premises complete all as specified and as directed.

Material and labour for Second class hard-wood in scantlings clean sawn and fixed including dismantling timber scantlings of size 40 sq. cm and over in section, in any position for unframed work and taken as credit complete all as specified and as directed.

Supply and fix Aluminium composit panel board 4mm thick as on for cladding/bush board with aluminium frame work of size 35mmx25mmx 2mm th aluminium section with necesary fitting and scaffolding extra, including dismantling old unserviceable panel board of any description and taken as credit complete all as specified and as directed.

Supply and fix PVC (SWR) eaves gutter trapezoidal profile 150mm bore including pipe accessories PVC holder bats , bolts nuts etc including dismantling of exsiting rain gutter of any description and taken as credit complete all as specified and as directed.Note : Make of PVC eaves gutter :Finolex/Supreme/Prince

Supply and fix Rolled mild Steel work in tubular trusses, posts,rafters, truss etc including special shaped washers etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 complete all as specified and as directed .

Supply and fix Mild steel framed work as in doors and gate of angle or other section with gusset plate, rails bracces etc complete, drilled for fixing of steel sheeting etc to be complete including either hooks and hinges or steel hanging door fitting also fastening and fixing etc confirming to Fe 410-W(Gde-E-250)quality-A complete all as specified and as directed.

Supply and fix Mild steel framed work such as grills, grating etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars(for windows); barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks and similar work conforming to Fe 290. Gde E-165 complete all as specified and as directed.

Supply and fix Rolled Mild steel post and struts in fencing and similar work conforming to Fe-290 Gde E-165 including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets for securing wire mesh including all necessary drilling,bolting or riveting etc, complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire etc, complete all as specified and as directed.

Supply only chain link fencing MS galvanised any size or type etc, complete all as specified and as directed.

Supply and fix Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed complete all as specified and as directed.Note : Each line wire to be measured .

Supply and fix Mild steel sheet plain1.60 mm thick in door shutter, covering to door frames etc with welding including bending, turning up mitred angle etc and covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed,holes punched;including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams, mitred angles, stopped ends, outlets, etc. as required complete all as specified and as directed.

Supply and fix Steel ventilaor with top hung shutter including hinges steel peg stay complete all as specified and as directed.

Supply and fix Wire netting of galvanised steel wire 0.91 dia ,12 mm size fixed with tinned tacks of wire etc complete all as spd and as directed.

Material and labour for Rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick in cement mortar 1:6 on other than fair faces of brick work or stone masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed .

Supply only integral water proofing compound Note :Make :Impermo/Roff/Cico

Material and labour for Rendering 15mm thick in CM 1:6 on brick surfaces and surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and Labour for Applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc, complete all as specified and as directed.

Material and labour for Preparing newly plastered surface of wall and applying two coats of cement base paint over a coat of priming plastered and other surfaces with alkali resistant primimg paint complete all as specified and as directed.

Material and labour for Complete removal of existing treatment on walls and applying two coats of cement base paint over a coat of priming plastered and other surfaces with alkali resistant primimg paint including necessary preparation of surfaces complete all as specified and as directed.

Material and Labour for Complete removal of existing treatment on old walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc complete all as specified and as directed

Material and labour for Preparation of old wood and wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for Rendering 15mm thick in CM 1:4 on fair faces of concrete surfaces and finished fair and even without using extra cement complete all as specified and as directed.

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed .

Material and labour for Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over rendering 10mm thick in cement morter 1:4 on other than fair faces of brick work or stone masonry surfaces in backing coat of skirting, dado etc,complete all as specified and as directed

Material and labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size/shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc, complete all as specified and as directed

Supply and fix 110 mm bore PVC (SWR) pipe , single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Material and labour for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, Internal dia of pipe in 450 mm, etc complete all as specifed and as directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m in depth and getting out in hard/dense soil etc including trimming bottom and sides of trenches, levelling/gradient /slopes and ramming bottom of trenches complete all as specified and as directed.

Excavation in trenches for each additional 1.5m or part thereof in depth beyond the first 1.5 m and getting out in hard/dense soil etc including trimming bottom and sides of trenches, levelling/gradient /slopes and ramming bottom of trenches complete all as specified and directed.

Returning filling in including spreading levelling, watering and well ramming in layers n.exc 25cm thick with useful soil all as specified and directed.

Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point in soil all as specified and directed.

Material and labour for Plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate as in foundation, filling, mass concrete, levelling courses and sub bases complete all as specified and as directed.

Material and labour for PCC 12:4 type B1 (Using 20mm grtaded stone aggregate) as in channels, benching of manhole, laid to shape and slope and finished even and smooth using extra cement including necessary stesl form work etc complete all as specified and as directed.

Material and labour for providing Plain Cement Concrete (1:2:4) type B1 using 20 mm graded aggregate as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, coping, kneelers, apex stones etc water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work all as specified and directed.

Material and labour for PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in precast RCC manhole covers including necessary steel form work /moulds etcand set in cm 1:4 complete all as specified and as directed.

Material and labour for Loose filling with brick aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and as directed.

Material and labour for Pre-cast cement concrete solid block masonry, exc 10cm width, blocks cast in PCC 1:3:6 type C1, using 20mm graded stone aggregate, set in CM 1:6 complete all as specified and as directed.

Supplied only integral waterproofing compound

Material and labour for Reinforced concrete pipes, class NP2, 600mm dia laid and jointed complete with collars including concrete bed with Cement concrete 1:3:6 type C-2 to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in etc , complete all as specified and as directed.

Material and labour for Reinforced concrete pipes, class NP2, 450mm dia laid and jointed complete with collars including concrete bed with Cement concrete 1:3:6 type C-2 to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in etc , complete all as specified and as directed.

Material and labour for Reinforced concrete pipes, class NP2, 300mm dia laid and jointed complete with collars including concrete bed with Cement concrete 1:3:6 type C-2 to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in etc , complete all as specified and as directed.

Material and labour for Reinforced concrete pipes, class NP2, 200mm dia laid and jointed complete with collars including concrete bed with Cement concrete 1:3:6 type C-2 to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in etc , complete all as specified and as directed.

Material and labour for Reinforced concrete pipes, class NP2, 150mm dia laid and jointed complete with collars including concrete bed with Cement concrete 1:3:6 type C-2 to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in etc , complete all as specified and as directed.

Material and labour for TMT bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for TMT bars 6 to 8 mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply and fix 110 mm bore PVC (SWR) pipes , single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified.

S&F for PVC vent pipe 110mm bore single socketed in any length etc, completed all as specified & directed.

M/s. KIRAN M CHOUGULE

M/S SAMARTH CONSTRUCTIONS

SHRI.H.R.PATIL

ASHOK M RAJGOLKAR

M/S MAHADEV M PATIL

DHANSHRI ENTERPRISES

M/s B C CHOUGULE

M/s. N D KALING