REPAIR/ REPLACEMENT OF JOINERY AND CERTAIN MISC B/R WORKS AND REPAIRS TO BOUNDARY WALL, FENCING, GATE, CULVERT, DRAIN AND CERTAIN ALLIED WORKS IN DOMESTIC AND TECH AREA AT 20 WING AF STN UNDER GE (AF) BAGDOGRA

Amount

Dismantling Plain or corrugated steel sheeting/ FRP sheet any gauge thickness incl Nainital or similar pattern roof coverings complete all as specified and as directed.

M&L for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L or J hook and washers, in roofs, walls etc. with grade of zinc coating 275 etc complete all as specified and directed.

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 etc complete all as specified and directed.

S&F Fibre glass reinforced translucent corrugated sheeting 2 mm thick with two corrugatations side lap fixed with coach screw and washer in roof wall etc fixed with L type or J type or cranked hook bolts in lieu of screw complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings incl ridges complete all as specified and as directed.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L - type of J - type or cranked hooks and bolts complete all as specified and as directed.

All as per item No.8 above but fixing only (except sheet).

M&L for asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L - type of J - type or cranked hooks and bolts complete all as specified and as directed.

Dismantling of wrought or mild steel work of any description or otherwise provided for complete all as specified and as directed.

S&F mild steel work for wind tie including securing bolt and necessary; drilling posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161- 1998 grade St-240 complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new steel / iron surfaces of any description n.exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coats of zinc chromate primer complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed.

M&L for second class hard wood framed and fixed in scantlings clean swan complete all as specified and directed.

M&L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and directed.

Dismantling boarding any description fixed in any position fixed with nails as in eaves board complete all as specified and directed.

S&F 20 mm thick second class hard wood planed one side boarding with butt joints fixed with nails in any situation (except flooring & skirting) like eaves board , board under valley gutters etc complete all as specified and directed,

M & L for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs etc any thickness including cover fillets complete all as specified and directed.

S&F for Powder coated galvanised iron snap grid frame work of size 600 x 600 mm for false ceiling comprising of Main runner 'T' section of size 38mm x 24mm x 0.40mm thickness, Cross 'T' of size 29mm x 24mm x 0.3mm thickness and wall angle of size 24mm x 24mm x 0.43mm thick suspended with 4mm dia GI wire from purlin @ 1.20m c/c and fixed with 4mm thick designer ceiling boards complete all as specified and directed.

Demolition and removal of existing Brick tiles or terracing tiles, single layer on roofs including Wire brushing and cleaning top surface of cement concrete, including flashings and junction of parapets, etc and removing debris/rubbish materials out side MoD land complete all as specified and as directed.

M&L for 25 mm average thick padding with plain cement concrete 1:2:4, type B0) (using 12.5mm graded stone aggregate) finished even & smooth without using extra cement complete all as specified and as directed.

M&L for Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 including laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) exc 500 Ltr n.exc 1000 Ltrs complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. exc 500 Ltr n.exc 1000 Ltrs complete all as specified and as directed.

S&F in repairs, Vitreous china, Squatting pan, 'Orissa Pattern', size 580 mm x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) and including 100mm bore ‘P’ or ‘S’ trap and provision of cement concrete bedding and connected to existing flush pipe complete all as specified and as directed.

S&F in repairs, 10 Ltrs capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs, vitreous china Wash hand basin, white , flat back size 550 x 400 mm excluding tabs but including brackets, CP waste coupling complete all as specified and directed.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern) white including connection to drain (or outgoing pipe) and to flush pipe, anti-syphonage pipe and Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.

S&F in repairs, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. complete all as specified and as directed.

S&F in repairs, 15mm bore fancy type chromium plated angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs, 15mm bore fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed with wall flange complete all as specified and directed.

S&F in repairs, 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs, 15mm bore fancy type chromium plated with long shank and cup (concealed type) stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs, Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs, brass chromium plated shower rose 125mm size with or with out swivel joints, any size including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs, 100mm dia PTMT grating complete all as specified and directed.

S&F in repairs, PVC connection 15mm size with PTMT nut at both ends with washer, 450mm long and fixed complete all as specified and directed.

S&F in repairs, CP toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated brass screws complete all as specified and directed.

S&F in repairs, corner shelf of PTMT fixed with chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300gms) complete all as specified and directed.

S&F in repairs, CP towel Rail 600mm long "D" type 20mm dia complete all as specified and directed.

S&F in repairs, CP soap dish fixed to wall with screw complete all as specified and directed.

S&F in repairs, PVC water storage tank cylindrical, vertical with closed top with threaded cover hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet including removing from site complete all as specified and directed.

S&F in repairs, 20mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking up or down 15mm dia bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.

Taking up or down 20mm dia bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.

S&F 15mm dia bore GI tubing medium grade fixed to wall or ceiling or laid in floors etc complete all as specified and directed.

S&F 20mm dia bore GI tubing medium grade fixed to wall or ceiling or laid in floors etc complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), and rubbish to the premises complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm or 450 x 350 x 7 mm thick with matching highlighter laid over and including 10 mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles complete all as specified and directed.

M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM 1:6, set, jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM 1:6, set, jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per Item No 56 here in above, but as in skirting laid over and including 10 mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for Granite (of any type) work (table rubbed and polished) 18 to 20mm thick in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each and removing from the site including making good the disturbed surfaces of wall etc to match with existing adjoining surfaces complete all as specified and as directed.

All as per Item No 60 here in above but exc 1,5 sqm but not exc 4 sqm each complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 45mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face ,supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F 100mm long Stainless steel butt hinges, medium weight, cold rolled complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing with complete accessories all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified and directed.

S&F in repairs, Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Taking down shutter of any description n. exc 1 Sqm and removing from site.

All as per item No 70 above but area exc 1.00 Sqm and n. exc 2 Sqm.

S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete size of frame 105mm X 60mm.

All as per item No 72 above but size of frame 125mmX60mm.

S&F 2nd class hard wood 30 mm thick Plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated.

S&F 30mm thick flush shutters, solid core construction with block board core and ply wood face panels, commercial type on both sides.

S&F 2nd class hard wood 35 mm thick glazed and skelton shutter open rebated and prepared to receive glass / gauge etc, edges of framing plain, chamfered or rounded and fitted with cut and mitred beads for securing gauge, size of members as per SSR Part - I section clause 8.20 (a).

S&F steel ventilator top hung shutter with box type hinges ,bottom panel fixed incl peg stay lugs handle and glazing bar complete incl one shop coat of red oxide primer.

S&F steel window with side hung shutters incl projecting type hinges with steel handle and steel peg stay, complete with glazing bar dovetailed or welded.

All as per item No 78 above but without glazing bars.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings. (Confirming to FE-410W(Gde-E250 Quality B). all as specified.

S&F 25mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer one face, fixed with screw to timber or steel frame work.

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

S&F MS butt hinges medium weight 100 mm size fixed with MS screws.

All as per item No 83 above but 75 mm size.

S&F aluminium anodised barrel tower bolt extruded section 150mm long and fixed with MS screws.

S&F 100mm extruded aluminium alloy handle anodised fabricated type and fixed with MS screws.

S&F 250 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut.

S&F in repair in 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar all as directed.

M&L for two coats of synthetic enamel painting over a coat of redoxide primer on steel surfaces over 10 cm width or girth incl preparation of new surface.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple complete all as specified.

S&F Sheet glass, 4.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane.

S&F one side frosted glass, 4.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane.

S&F 18/19 mm thick block board grade 2 quality interior grade decorative type with decorative face veneer on one face fixed with screws to timber framework as inn shelves, drawers etc complete all as specified.

Taking down cement or cement lime plaster on brick or concrete surfaces incl racking out joints, hacking for key scrubbing down with water etc.

M&L for Rendering 15mm thick in CM 1:6, on other than fair faces of brick work or concrete surfaces and finished fair and even including three coats of white wash including preparation of new surfaces.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Supply only 4mm dia Chain link MS galvanised fencing, weight not exceeding 4kg per sqm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S&F in repairs, Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

Restraining and resecuring including making good staples etc. of Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

Dismantling structural steel work including doors, gates etc but excluding framed truss etc complete all as specified and directed.

M&L mild steel farmed work as in doors, gates of angle iron, flat iron or other section with gusset plates, rails, braces, hold fast, pin and pintol hinges, sliding bolt etc. complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as directed.

Dismantling posts or struts (steel or RCC) any section including taking out embedded portion in concrete, brick work, masonry etc and making good disturbed ground to match with the existing surface complete all as specified and directed.

S&F mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to e-290 Gde E-165 complete all as directed.

M&L for PCC (1:3:6) type C 2, (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Supply only Steel round bar 10 mm dia and over for tying chain link fencing etc complete all as specified and directed.

Supply screw bolts (machine made) with hexagonal or square head at one end and rounded the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but n.exc 10 cm and dia of shank 11 to 15mm and fixed in position complete all as specified and directed.

M&L for preparation of new or untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

M&L for preparation of new or untreated steel and iron surfaces of any description not exc.10 cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of brick work/ stone masonry built in cement mortar including arches, pillars etc and excluding precast concrete article all as specified and as directed.

M&L for Brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in 1:4 complete all as specified and as directed.

All as per sl item No 111 above but except bricks.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in built in cement mortar 1:4 complete all as specified and as directed.

Demolition of (Un reinforced) Cement Concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in sub base etc complete all as specified and as directed.

M&L for designed, pre polished chequered cement concrete tiles 25mm thick with grey cement and pigments set, jointed & pointed in neat cement slurry, laid over 20mm thick screed bed in CM 1:6 finished with pigments match the shade of tiles complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate) 75mm thick as in plinth protection/ path/ paving laid in panels, finishing the top surface even and smooth with out using extra cement complete all as specified and directed.

Forming Contraction (Dummy) joints 50mm deep X 10 mm wide, filled with sealing compound Grade 'A' etc complete all as specified and as directed.

M&L for sand cushioning to receive interlocking tiles incl spreading, levelling in layers complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade With Grey Cement and pigment complete all as specified and directed.

Demolition of cement concrete of any description and in any position etc complete all as specified and as directed.

M&L for Cement concrete (1:2:4) type B1 using 20mm graded aggregate as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement complete all as specified and directed..

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping, kerbs etc complete all as specified and as directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed.

M&L for precast cement concrete (1:2:4) type B-1 (20mm graded aggregate) in cover slab for drain and placing in position etc complete all as specified and as directed.

M&L for Mild steel bars (TMT bars) 10mm dia and over cut to length, bent to shape required including cranking bending, spirally for hoping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia, complete all as specified and directed.

All as per item No 127 above, but 6 to 8mm dia.

M&L for rendering 10 mm thick cement plaster in CM (1:6) on fair faces of brick wall or concrete surfaces and finishing the surface even and fair complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of cement based paint over a coat of alkali resistant primer complete all as specified and as directed.

Demolition of (Unreinforced)Cement Concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in surface channel and drain.

M&L for brickwork with flyash bricks (using old size bricks) straight or curved on plan exc 6m mean radius built in cement mortar 1:6.

M&L for brickwork with flyash bricks (using old size bricks) straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4.

M&L for 50mm thick cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection, laid in panels, finishing the top surface even and smooth without using extra cement complete all as specified and directed .

S&F in repair 110mm bore PVC (SWR) pipes single length with robber ring joints fixed to walls.

All as per item No 146 but laid in trenches or in floors.

S&F in repair 75mm bore PVC (SWR) pipes single length with robber ring joints fixed to walls.

S&F 110mm bore PVC (SWR) bends any radius.

S&F 75mm bore PVC (SWR) bends any radius.

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).

NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule A notes for details.

MESSERS D S ENTERPRISE

M/s Prakash Traders

M/S SUNNY ENTERPRISE

M/S IDEAL CONSTRUCTIONS

UNISON CONSTRUCTION

M/s Saha Construction Co.

RAMKRISHNA NARAYAN ROY & CO