SPECIAL REPAIR TO ROAD FROM BUDDHA CHOWK TO CANNON OFFRS MESS AND PROVN OF BLACKTOP ROAD AT THE REAR OF T- 40 JACOB MARG, SOA DEOLALI UNDER GE DEOLALI

Amount

Repairs to pot holes any depth, not exceeding 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 Sqm of paving bitumen, VG-10 putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m of paving bitumen, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of pot holes exceeding 30mm all as specified and directed.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming/ tack coat with bituminous primer (Paving VG - 10 grade bitumen) @2.5 Kg per 10 Sqm complete all as specified and directed.

M&L for premixed bituminous semi-dense asphaltic concrete 30mm consolidated thickeness laid using mechanical paver for any width of road with max 5.0% binder content, paving butimen VG-30 grade by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all specified & directed. Note : 5.0% binder content shall be for pricing purpose only. Any deviation in minus side shall be adjusted as specified in Clause 9.1 of Particular specifications and no price adjustment shall be made for plus side variation.

Surface excavation n'exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specifide and directed.

Excavation over areas n'exc 1.50m deep and getting out in soft/loose soil complete all as specifide and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point (Soils) complete all as specified and as directed.

Rolling and consolidating formation surface in cuttig using power roller.

M & L Soling (or sub base) Spread thickness 150 mm with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber

M&L for 150mm thick Granite trap of Basalt (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient materials and camber required.

M&L for preparing WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc for applying evenly a tack coat with VG-10 grade paving bitumen @ 7.50 Kg per Ten Sqm with the help of Mechanical sprayer over the WBM surface etc complete all as specified and as directed.

M&L for premixed bituminous macadam laid using mechanical paver for any width of road, rolled & compacted to required gradient and camber (consolidated thickness 75mm or less) with binder content (paving VG - 30 grade bitumen) of min. 4% by weight of total mix all as specified & directed .Note: 4% binder content shall be for pricing purpose only. Any deviation in minus side shall be adjusted as specified in Clause 10 of Particular specifications and no price adjustment shall be made for plus side variation.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming/ tack coat with bituminous primer (Paving VG - 10 grade bitumen) @5.0 Kg per 10 Sqm complete all as specified and directed.

M&L for premixed bituminous semi-dense asphaltic concrete 40mm consolidated thickeness laid using mechanical paver for any width of road with max 5.50% binder content, paving butimen VG-30 grade by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all specified & directed. Note : 5.50% binder content shall be for pricing purpose only. Any deviation in minus side shall be adjusted as specified in Clause 9.1 of Particular specifications and no price adjustment shall be made for plus side variation.

M&L for painting line, dashes, arrow, letters etc. on road pavement (parking etc.) providing & applying 2 mm thick road marking strips (reflective) of specified shade /colour using hot thermoplastic material fully / semi-automatic application machine fitted with profile shoe heater driven by experienced operator on road surfaces including preparation of previously treated surfaces , cleaning surfaces of all dirt, scales, oils, grease & foreign materials etc. complete all as specified and directed by Engineer- in- charge.

S&F in repairs cats eye stud of size 100mm x100mm x25mm (ABS) Yellow body fixed complete all as per Manufacturers instructions and as directed.

M/s M R MAHANA