CER REPREPLACEMENT OF ROOFINGCEILING WOODEN WORK JOINERIES FLOORING PLINTH PROTCTION FOOTPTH TILING PLUMBING N SANITRY FITTINGCERTAIN JCOsORMD ACCNOTM OF CERTN UNITS N REPREPLCMNT OF ELECTL FITTINGS N FIXTRES INCL RWIRING TO CER OTMMD JSR GERANCHI

Amount

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering, complete all as specified and directed.

S&F 6 mm thick Non-asbestos cement corrugated sheet fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as specified and directed.

Fixing only 6 mm thick asbestos cement corrugated sheet fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as specified and directed.

Dimantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall and ridge,fixed with self tapping srews complete all as specified and directed.

Dismantling timber scantling 40 sqcm and over in section in any position in framed work complete all as specified and directed.

M&L clean swan in second class hardwood in scantlings in timber fixed.

Demolition of brick wk masonry built in cement mortar includings all quoins arches pillars etc, complete all as specified and directed.

M&L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6, complete all as specified and directed.

All as per Ser item No 9 above but except bricks

M&L Brick work with sub class 'B' Brick straight or curved on plain to any radius in half brick thick wall built in cm 1:4, complete all as specified and directed.

Dismantling of wall and ceiling board any thickness/description including cover fillet, complete all as specified and directed.

M&L GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre incl 2mm dia G.I. ( upto 1200 mm length ) adjusting level to Purlins/ Rafter. .

M&L 4mm thick non asbestos fibre cement designer building board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n’exc1.5 Sqm and removing from site.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc1.5 Sqm but n.exc 4.00 Sqm each and removing from site.

Taking down shutters of any description Area .exc 1 sqm but n exc 2 sqm each

Dismantaling floor, hearth or wall tiling, including cement mortar bedding (but not backing ) removing serviciable tile to store & rubbish off the permisses.

Cutting chases, pinning in, in brick walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making not exc 10 cm girth.

M&L 15mm thick screed bed or bedding layer of mortar in CM (1:6) for lying floor finishes and surface fair and even.

M&L Cement Concrete tiles 25cm x 25cm x 22mm thick , machine pressed, set jointed and pointed in neat cement slurry in floors and cut and polished with grey cement and no pigment.

M&L Non - skid Ceramic jointless tiles of any colour/shade 7 to 8 mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed.

All as per item No 22 above but as in verticle surface or skirting complete all as specified and directed.

M&L Non - skid Ceramic jointless tiles of any colour/shade 7 to 8 mm thick area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed.

All as per item No 24 above but as in verticle surface or skirting complete all as specified and directed.

M&L 10mm thick screed bed or bedding layer of mortar in CM (1:4) for laying on vertical surface to receiving wall tiles and surface finished even & fair.

M&L glazed ceramic coloured tiles of size 300 X 200 X 7mm mm thick as in walls etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles, complete all as specified and directed.

M&L glazed ceramic coloured tiles of size 350 X 250 X 7mm/ 450 x 350 x 7 mm thick as in walls etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons

M&L 20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including circular cutting,chamfering of edges as required.

Cutting holes in brickwalls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required not exc. half brick

S&F Flat iron / angle iron for hold fast to fixed door/window.

M&L Pressed steel frames 125 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed, supplied and fixed.

M&L Pressed steel frames 105 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed, supplied and fixed

S&F factory made 35mm thick 2nd class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated.

S&F 2nd class hard wood 35 mm thick glazed & skelton shutter (any no of pannel) open rebated and prepared to receive glass gauge etc with sush bar edges to framing plain chamfered or receive glass gauge etc with sash bar edge of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24 (a).

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and shown on drg in SSR Part-II 2004.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing.

All as per above item No 38, but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm MS solid tube and this tube shall be welded to MS tubes. The wire gauge shall be strectched to firmly.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (style), with particle board core and 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

M&L 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides covered with decorative face veneer with lipping / frame to match.

M&L Providing, cement concrete type B-0 1:2:4 (12.5 mm graded aggreate) in filling of pressed steel frame , coping, fixing of MS railing work, fixing of hold fast etc similar work.

S&F 100 mm Butt hinges medium weight medium cold rolled mild steel, complete all as specified and directed.

S&F 100 mm Butt hinges extrucded aluminium alloy with galvanised mild stel hinge pin, anodised and fixed, type C-21, complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F of 150 mm size aluminium handles cast type anodised, complete all as specified and directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extructed section or cast aluminium alloy and fixed.

M&L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dove tailed or welded (including two nos tower bolts 125mm in each leaf and one nos MS flate iron 25x 3mm handle in each leaf, complete all as specified and directed.

M&L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dove tailed or welded (including two nos tower bolts 125mm in each leaf and one nos MS flat iron 25x 3mm handle in each leaf, complete all as specified and directed.

S&F as in repairs Steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified and directed.

M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to fe.290.Gde-E-165

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples over steel windows and gauzed door, complete all as specified and directed.

All as per item No 52 above but in repairs

Hacking out old broken glass any thickness, size, quality or description, from metal/wooden frame including punching or drilling out old glazing pins and removal of demolished material from site.

S&F 3mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane .

All as per item No 55 above but 4 mm thick figured glass pin headed type complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thick (below or above ground level).

M&L 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path/floor finishing surface of concrete topping even and fair without using extra cement complete all as specified and directed.

M&L 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring and finised the concrete surfaces even and smooth using extra cement

S&F Glass dividing strips, 3 mm thick and 38 mm wide inserted in position

M&L PCC type C-2 1:3:6 (using 40mm graded stone agg) as in surface channels and drains.

M&L extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra, including forms, moulds, mitred/ stopped end etc.

M&L Providing, cement concrete type B-1 1:3:6 (20 mm graded aggreate) as in coping etc similar work , complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal from site.

S&F 15mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.

Refixing old 15mm bore GI tubing medium grade galvanized with fitting fixed in new or old position, complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site, complete all as specified and directed.

S & F, 20mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.

Refixing old 20mm bore GI tubing medium grade galvanized with fitting fixed in new or old position complete all as specified and directed.

Dismantling water tanks Capacity in Exc 250 & n exc 500 litres and removing to store

Dismantling water tanks Capacity in Exc 500 & n exc 1000 litres and removing to store

S & F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) Capacity in 500 litres hoisted and fixed in position all as specified in SSR Part I

S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) Capacity in 1000 litres hoisted and fixed in position all as specified in SSR Part I.

S&F PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore pipe.

S&F in repair PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore pipe.

S&F in repair Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore pipe.

S&F in repair PVC (SWR) pipes 75mm single socketed in any length with rubberring joints, laid in trenches or in floors

S&F in repair PVC (SWR) pipes 110 mm single socketed in any length with rubberring joints, laid in trenches or in floors

S&F in repair PVC bends any radius 75 mm dia, complete all as specified and directed.

S&F in repair PVC bends any radius 100 mm dia, complete all as specified and directed.

S&F in repair vitreous china wash hand basin,counter sunk white flat back of size 550 mm x 440 mm including brackets and making necessary arrangement for fixing.

S&F in repair vitreous china squating pan 'ORRISA' pattern, size 580X450mm white with integral foot rest complete including connection to trap and to antisyphonage pipe etc complete including making good to floor.

S&F in repair vitreous china pedastal type water closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe etc complete and making good to floor.

S&F in repair EWC sheet cover to match EWC complete all as specified and directed.

S&F in repairs Health fauset (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook incl making connections and fixed in position complete in all respect as specified.

S&F, in repair 10ltr capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket.

S&F in repair, 450mm long, 15mm dia, PVC connection pipe, with brass unions on both ends.

S&F in repair, 15 mm bore bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule.

S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm bore angle/ stop valves , fancy type chromium plated with long shank and cup (conceaeld type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 32 mm bore dia of dishcharge pipe Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms)

Supply only of 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe.

S&F in repairs of 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe.

S&F 20mm dia Aluminium powder coated as in golden colour finish draft rod complete all as specified and directed.

S&F brass chromium plated decorative bracket fixed to wall, complete all as specified and directed.

S&F in repair Brass chromium plated tubular towel rail 20mm dia D Type, 60 cm long between flanges.

M&L in repair 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls/concrete surface etc. including racking out joints, hacking for key, scrubbing down with water etc.

M&L 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:6) surface finished fair & even complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) surface finished fair & even complete all as specified and directed.

M&L preparation of new plasterd wall surfaces and applying two coat of oil bound distemper of approved colour and shade over one coat putty .

M&L preparation of new surface of wall and applying three coats of white wash.

M&L preparation of new plastered surface of wall and applying two coats of cement base paint.

M&L applying one coats of synthetic enamel paint incl preparation of old wooden surfaces of any description exc10cm width or girth not otherwise described.

M&L applying two coats of synthetic enamel paint over a coat of pink primer including preparation of newly wooden surfaces of any description exc10cm width or girth not otherwise described complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described.

Taking down carefully copper/aluminium point wiring (light, fan socket or power) complete including fittings & fixtures such as switches, ceiling roses, pendents, regulators etc and making good disturbed surface of walls, floors etc complete all as specified & directed by Engineer-in-charge. Note :- Light fittings shall be measured & paid separately.

M&L point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including medium grade, PVC casing caping and accessories on wall/roof/floor etc, (ISI marked) with mild steel/pressed steel sunken box (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly completed all as specified and directed by Engineer-in-charge for the following .

One light/ fan/bell point, controlled by one, one way switch.

One socket out let 3 pin 5 Amps on the same board.

One socket outlet of 3 pin 5 Amp on independent board.

One bell point controlled by one 5 amp bell push

Material and labour for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated FR multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black, Earth - Green) FRLS grade dwawn in and including PVC casing and caping not less than 20mm size and fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.12 mm covered with 2.80 mm thick phenolic laminated white sheet cover for one 15 amp socket outlet controlled by one switch on independent board incl 1.5 Sq mm copper conductor earth wire and connected to common earth dolly on independent board.

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including medium grade, PVC consealed conduit of 20mm bore with accessories in wall/roof/floor etc, ISI marked with mild steel/prestressed steel modular sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, 3mm thick plastic laminated sheet top cover for mounting switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly completed all as specified and directed for the following .

One light or fan point, controlled by one, one way switch 5 Amps.

One socket out let 3 pin 5 Amps on the same board.

One socket outlet of 3 pin 5 Amp on independent board.

One bell point controlled by one 5 amp bell push

Material and labour for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated FR multistranded copper conductor cable 2.5 sqmm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including medium grade, PVC consealed conduit of 20mm bore with accessories in wall/roof/floor etc, and sunken galvanized pressed steel terminal boxes of thickness not less than 1.12 mm covered with 2.80 mm thick phenolic laminated white sheet cover for one 15 amp socket outlet controlled by one switch on independent board incl 1.5 Sq mm copper conductor earth wire and connected to common earth dolly on independent board.

S&F in repair switch piano, flush type, 5 amps, 230 volts, single pole, one way (ISI marked) complete all as directed.

Supplying and fixing switch socket combination two in one 5 and 15 Amps multipurpose flush type universal 240Volts.

Supplying and fixing switch socket combination two in one 5 Amps multipurpose flush type universal 240Volts.

S&F in repair sockets outlet multipurpose 2 in 1, 3 pin, 5 Amps flush type confirming to IS all as specified and directed.

S&F in repair ceiling rose, PVC of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.

S & F in repair bell push 5 amp flush type

S & F in repair modular switch 1 way 6A, 1 module.

S & F in repair modular switch 1 way 16A, 1 module

S & F in repair modular socket, 6A - 3 pin combined 2 module

S & F in repair modular modular Socket 6A/16A - 3 pin combined 2 module.

S & F in repair modular fan regulator step type, 120W - 2 module

M&L in repair modular white cover plate with frame ( both inner plate & outer plate cover ), 1 module.

M&L in repair modular white cover plate with frame ( both inner plate & outer plate cover ), 2 module.

M&L in repair modular white cover plate with frame ( both inner plate & outer plate cover ), 3 module.

M&L in repair modular white cover plate with frame ( both inner plate & outer plate cover ), 4 module.

M&L in repair modular white cover plate with frame ( both inner plate & outer plate cover ), 6 module.

M&L in repair modular Modular metal flush box 1 & 2 module

M&L in repauir modular metal flush box 3 module

M&L in repair modular metal flush box 4 module

M&L in repair modular metal flush box 6 module

S&F in repair MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed.

S&F in repair MCB single pole & neutral 40 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge.

S&F in repair sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 8 way with 200 Amps rated copper bus bar double door type complete all as directed.

S&F in repair sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 4 way with 200 Amps rated copper bus bar double door type complete all as directed by Engineer-in-charge.

S & F in repair bell ding dong type 230 v, 50 Hz

S&F in repair, lamp holder, PVC/ polycarbonate type with back plate suitable for batten fittings and including LED lamp 12 watt complete all as specified and directed by Engineer-in-charge.Make : Crompton Greaves/Havells/Philips/Bajaj

S & F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified & directed by Engineer-in-charge (Make :- Anchor/Havells/Legrand

S & F in repair LED building Security light fitting 1x20watt with polycarbonate housing, Aluminum gear tray duly prewired inbuilt LED module IP 65 Protection complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of size 1.5 sq mm including GI tubing 40mm dia light grade 1.5m long band to shape for mounting of security light with 2 nos MS,FI clamp including plinth with nut bolts etc complete all as specified and directed Make: Crompton Greaves/Havells/Philips.

Taking down existing earthing and M&L for new Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 5 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. NOTE:- (i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 5 of MES SSR Part-I. ii) Item includes the cost of 7.5M GI pipe for protection of earth wire. Any variation in length shall be adjusted through deviation order. (iii) Item includes cost of 7.5 M earth lead wire. Any variation in length shall be adjusted through deviation order. (iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

S&F in repair service connection of 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathed of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core multistandard cable flat or circular of 6 Sqmm 2 core including taking down old service cable complete all as specified & directed.

M&L in repair for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sq mm (FRLS) in PVC casing & capping non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 4 Sq mm (FRLS) of continuous earth wire green in colour complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 6.0 sqmm cable & One run of 4 sqmm cable and One run of PVC casing & capping shall be paid as one unit length.)

Taking down old unserviceable LT cable, supply and Laying of cross sectional area of 10 Sqmm 2 core in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with cable size aluminum lugs and testing. XLPE insulated, armoured heavy duty electric cables with aluminum conductor, 1100 volt grade, all as specified directed.

S & F in repair box type fitting 1x 16w, blue coloured end caps, prewired for LED tube including LED tube 16 watts, including connecting up with twin core twisted flexible copper conductor cable with suitable size complete and all as specified and directed by Engineer- in Charge.”. Make: Cromton Greaves Cat part no for Fitting DMLN1LT8-16 and for LED tube LTT8-16 or Equivalent Make: of Havells/Philips.

S & F in repair recessed mounting LED Square downlighter luminaire with die cast aluminium housing 15 watts incl provn of three core cable size 1.5 Sq.mm from ceiling rose to fitting with all accessories and all as specified and directed by Engineerin Charge Make- Crompton greaves Limited LSDN-15-CDL/TL/WW or Equivalent make of Havells/Philips.

Supply and fix exhaust fan steel boday AC singal Phase . 230V of size 300m sweep with ,blades, and frame and louvers.

Supply and fixing ceiling fans complete with blades down rods ,electronic regulator and accessories, 230V, 1200MM sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five ster rated with brushess direct current motor (BLDC)

M/S JAI MATA DEE CONTRUCTION CO.

M/S VIKAS CONSTRUCTION CO.