PROVN OF 600M SAND TRACK OF 3M WIDTH AT PT GROUND AND SPECIAL REPAIRS REPLACEMENT OF STREET LIGHTS WITH LED LIGHTS INSIDE UNIT AND MD ACCN UNDER GE SAUGOR

Amount

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m deep in soft/loose soil complete all as specified and directed.

Surface excavation not exc 30 cm deep and averaging 12 cm deep and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material not exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundation, mass concrete fiiling, etc complete all as specified and directed.

M&L for brickwork (Old size ) with subclass ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 (using 12.50mm graded stone aggregates) as in plinth courses,copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L for 40mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kg/ Sqcm laid in trenches complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work in CM 1:4 surface finished even and fair complete all as specified and directed.

M&L for preparaion of newly plastered surface of wall and applying three coats white wash complete all as specified and directed

Supply and fixing LED Street Light fixture with IP-66 protected die-cast aluminium housing and heat resistive toughened glass including taking down existing unserviceable street light fittings complete all as specified and directed. Note:- (i) LEDs having LM-79 and LM-80 complied as per L-70 standard and tested for minimum 10,000 burning hours with 5700-6000 K CCT. (ii) Maximum power consumption shall not exceed 90W and system lumens shall not be less than 9,000. (iii) Optics shall be properly designed with Polycarbonate Lenses to avoid dark patches on the road. Street light without lenses will not be acceptable. (iv) Driver shall be 3 stage "Constant Current Constant Voltage" with voltage range of 150-270V AC. (v) Output voltage of driver should be complied to Safety Extra Low Voltage norms not exceeding 60 V DC. (vi)The quoted rate shall deemed to be included for provision of weather proof PVC insulated aluminium conductor cable 2.5 Sqmm, 2 core as required. (vii) LEDs used in the product shall comply with EN-62471 for photo - biological safety and certificate for the same from manufacturer shall be provided. Luminaire manufacturer shall produce certificate of association with LED manufacturer for minimum three years. Make of LED light fitting : Havells Cat part No ENDURAPEARLPLUSSL90W LED757SASYTOPC (90 Watt LED) or /CROMPTON cat part no LSTP-90-CDL/HALONIX cat part no HLSLD-C10-90-CWL-I .

S&F 40 mm bore light grade GI tube mounting bracket of 1.2 m in length, bent to shape at 140 degree in ‘L’ shape and fixed to wall /pole with and including 02 Nos flat iron clamps with bolts, nuts and washers including taking down existing mounting bracket and clamp of any type and any shape complete all as specified and directed.

Taking down existing mounting bracket and clamp of any type, any shape and refixing of existing bracket alongwith clamp ,nut bolt etc. after making proper shape & bend as required and to modified the bracket to suit with new fittings mounting portion complete all as specified and directed

shivansh traders

Lachman Das Govind Ram

dipangashu barick and associates