Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹5.9 LAccepted-AOC E 27 CWE WELLINGTON | 24 PARAGANAS NORTH | WEST BENGAL | 700028 | 1 | Accepted-AOC Being_L1 | |
| 2 | 2₹6.1 L+₹23,831.90 (4.07%)Rejected-Finance | 2 | Rejected-Finance quoted amount is higher than 1st lowest | |
| 3 | 3₹6.4 L+₹54,122.80 (9.25%)Rejected-Finance NO 12 25 26 KATHIRAVAN NAGAR MAHALINGAPURAM PO POLLACHI COIMBATORE 642 002 | COIMBATORE | TAMIL NADU | 642002 | 3 | Rejected-Finance quoted amount is higher than 1st lowest | |
| 4 | 4₹6.4 L+₹54,920.10 (9.39%)Rejected-Finance 18 KUSHAL LAYOUT 1ST CROSS KAGGADASAPURA CV RAMAN NAGAR POST BENGALURU 560093 | BENGALURU | BENGALURU URBAN | KARNATAKA | 560093 | 4 | Rejected-Finance quoted amount is higher than 1st lowest | |
| 5 | 5₹6.5 L+₹60,685.50 (10.4%)Rejected-Finance | 5 | Rejected-Finance quoted amount is higher than 1st lowest |
Tender Value
Refer Docs
EMD Value
₹13,400
Closing Date
30 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I AF coimbatore
AGE I AF COIMBATORE AFAC COMPLEX KAMARAJAR ROAD RED FIELD POST COIMBATORE PIN -641018
PROVISION OF CERTAIN MINOR WORKS UNDER AGE (I) (AF) COIMBATORE (PHASE I)
2023_MES_627565_1
8938_E8
Open Tender
Civil Works - Others
Item Rate
180 days
AFAC
As per NIT and tender documents
7 documents required · 7 mandatory
₹500
AGE I AF Coimbatore
₹13,400
Yes
16 Dec 2023
10 Nov 2023
7 Dec 2023
10 Nov 2023
30 Nov 2023
25 Nov 2023
10 Nov 2023 - 17 Nov 2023
Amount
Surface excavation not exc 30cm deep and averaging 15 cm deep and getting out in hard/dence soil.
M&L hardcore of gauge not exc 63 mm deposited spread and leveled in layers not exc 15 cm thick watered and rammed to a true surface .
M&L 75 mm thick PCC (Plain cement concrete) type B-2 1;4;8 (40 mm graded aggregate ) as in sub base.
M & L for Machine Pressed Precast rubbermoulded concrete interlocking Paver Block any shape, size,colour or design, confirming to 15658-2006 of 60mm thickness, M-30 Grade including M -sand filling under paver block including watering,consolidation nd leveling in layers n exc 25cm thick and all as specified and directed .
M&L for chequered cement concrete tiles 30cmx30cmx25mm thick , with grey cement and pigment set jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed or beding layer in cement mortar 1:6 complete all as specified
Removing off demolished building material out side the campus including loading and unloading etc., to a distance exc 5.0 Km but not exc 10.0 Km out side the MD land. Note: Responsibility of getting permission from concerned authority for disposal off and place of depositing the debris outside MD land and rests with contractor under his own arrangements.
Pre-cast cement concrete block masonry 1:3:6 type B1 (Usig 20mm aggregat with solid blocks, exc. 10 cm in width and setting in CM 1:6 mortar,complete in walls
Excavation in trenches not exc 1.50 mtr wide and not exc 1.50 mtr deep and getting out in hard dense soil for foudation etc
M&L for PCC 1:4:8 type D2 (40 mm graded stone aggregate) in foundation and mass concrete.
M & L for 150mm thick Cement concrete type D2, 1:4:8 (40mm graded stone aggregate) as in sub base.
M & L for 40 mm thick PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in floors finishing surface even and smooth using extra cement
M&L for Rendering in CM1:4, 15 mm thick on fair faces of brick or concrete surfaces finished even and smooth without using extra cement.
M&L for Preparation of new surfaces of walls and applying two coats of cement base paint over a coat of primer.
S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc to FE 410-W (Gde-E-250) quality -A
S & F Pre - painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of any color having tensile stregth of 550 Mpa as in roof covering/cladding fixed to walls fixed with self tapping screws as specified.
M & L for preparing new steel and iron surfaces of any description over 10 cm in width or girth, priming with red oxide and applying two coats of synthetic enamel paint over a coat of red oxide primer
Returning filling in trenches including spreading, levelling watering and well ramming in layers n exc 25 cm thick in hard/dense soils.
Removal of excavated soil to a distance n. exc 100m and depositing where directed at a level not exceeding 1.50m above the starting point including loading, unloading complete all as specified and as directed.
M & L for expanded metal, weight n exc 4 kg per Sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles
M&L for Cement concrete type B-1, 1:2:4 (20 mm graded aggregate )in steps, coping water troughs and the like including weathering, slightly angles and throating all as specified and directed.
S & F for framed work such as grills, gratings, etc.. With ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; conforming to Fe 290 Gde E 165
S & F MS hold fast for doors and windows etc complete all as specified and directed.
Demolition of Cement concrete in below or above ground level and paving not exc 15 cm thickness
M & L for 25 mm thick PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in floors complete all as specified and as directed.
M&L for applying 25mm thick mastic asphalt consisting of an intimate homogeneous mixture on mineral filler, well graded fine and coarse aggregate with industrial grade 85/25 bitumen as per IS 73 of 2006 cooked at 170 degree C to 200 degree C, laid hot trowled and floated by means of wooden float, Bitumen mastic after spreading and while still hot and in plastic condition including all material, labour, tools and plants complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbling down with water, etc all as specified and directed.
M & L Rendering in CM 1:6, 10mm thick on fair faces brick or concrete surfaces finished even and smooth without using extra cement
M & L prepation of newly plastered wall surfaces, apply 3mm thick wall care putty and applying two coats of distemper oil emulsion over a coat of primer all as specified and as directed by Engr-in-charge.
M & L for prepation of old treated wall surfaces and applying one coat of oil bound distemper all as specified and directed
M&L for preparation of old surface and applying one coat of white wash on ceiling surface all as specified and directed .
Taking down shutters of any description exc 1.00 Sqm but not exc. 2 Sqm each and refixing in the same opening after easing and adjusting and all as specified and directed.
Taking down shutters of any description exc 1. sq. m but n exc 2 sq and return to store. each complete all as specified.
Material and labour forIst cl HW 35 mm thick Glazed and skeleton shutter open rebated and prepared to receive glass , gauge, etc with sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.24 (a) and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge.
S&F 10mm thick tempered toughened glass glazing complete all as specified and directed.
S &F of solar control film 25micron reflective type sticked to glass panes as per instruction of manufacurs
S & F 100 mm size Brass Butt hinges medium weight
S & F 150 mm size Brass barrel tower bolts, with cast or sheet barrel and rolled orcast bolts and fixed
S&F 150 mm size brass handles fancy type Brass handles, cast type,polished bright.
S&F of Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) length of bolt 250mm and fixing bolt with rolled or drawn brass bolts and fixed
S & F Floor door stopper 150mm long with cover plate of brass body and tongue with hard drawn steel spring
S&F brass Mortice lock vertical type100 mm size 4 levers including escutcheon plates and two keys
S&F Aluminium ( Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg fixed in Repairs all as specified and directed
M&L for French polishing on surfaces of any description, width or girth including cleaning ,and preparing the surface including a coat of wood filler on new works with two or more coats all as directed
M &L for Preparation of new wood or wood based surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed
M &L for Preparation of old steel surface over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified and directed
M & L for Preparing old surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint.
ACCITE
Rajapriyaconstruction
TECKXPERT ENTERPRISES
SARASWATHI CONSTRUCTION
p.chinnasamy
Sri ASK Constructions
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .